BS EN ISO 13628-2:2006
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
31-07-2009
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Functional requirements
5.1 General
5.2 Overall requirements
5.3 General design parameters
5.4 Internal fluid parameters
5.5 External environment
5.6 System requirements
6 Design requirements
6.1 Loads and load effects
6.2 Pipe design methodology
6.3 Pipe structure design
6.4 System design requirements
7 Materials
7.1 Material requirements
7.2 Qualification requirements
7.3 Quality assurance requirements
8 Manufacturing requirements
8.1 Quality assurance requirements
8.2 Carcass
8.3 Polymer extrusions
8.4 Pressure and tensile armour layers
8.5 Anti-wear and insulation layers
8.6 End fitting
8.7 Special processes
8.8 Manufacturing tolerances
8.9 Repairs
9 Documentation
9.1 General
9.2 Design premise
9.3 Design load report
9.4 Design report
9.5 Manufacturing quality plan
9.6 Fabrication specification
9.7 As-built documentation
9.8 Operation manual
10 Factory acceptance tests
10.1 General
10.2 Gauge test
10.3 Hydrostatic pressure test
10.4 Electrical continuity and resistance tests
10.5 Gas-venting system test
11 Marking and packaging
11.1 Marking
11.2 Packaging
Annex A (informative) - Purchasing guidelines
Annex B (informative) - Bend stiffeners and bend restrictors
Bibliography
Describes the technical requirements for safe, dimensionally and functionally interchangeable flexible pipes that are designed and manufactured to uniform standards and criteria.
| Committee |
PSE/17/-/4
|
| DevelopmentNote |
Supersedes 98/713646 DC (07/2002) Supersedes 04/301931 DC (08/2006)
|
| DocumentType |
Standard
|
| Pages |
80
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NS EN ISO 13628-2 : 2006 AC 2009 | Identical |
| UNI EN ISO 13628-2 : 2007 | Identical |
| ISO 13628-2:2006 | Identical |
| EN ISO 13628-2:2006/AC:2009 | Identical |
| NF EN ISO 13628-2 : 2008 | Identical |
| NBN EN ISO 13628-2 : 2007 COR 2009 | Identical |
| NEN EN ISO 13628-2 : 2006 C1 2009 | Identical |
| I.S. EN ISO 13628-2:2006 | Identical |
| SN EN ISO 13628-2 : 2006 CORR 2009 | Identical |
| PD 8010-2:2015+A1:2016 | Pipeline systems Subsea pipelines. Code of practice |
| BS PD8010-2(2015) : 2015 | PIPELINE SYSTEMS - PART 2: SUBSEA PIPELINES - CODE OF PRACTICE |
| 14/30286899 DC : 0 | PD 8010-2 - PIPELINE SYSTEMS - PART 2: SUBSEA PIPELINES - CODE OF PRACTICE |
| PD 8010-2:2004 | Code of practice for pipelines Subsea pipelines |
| ASTM D 2857 : 2016 | Standard Practice for Dilute Solution Viscosity of Polymers |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| ISO 75-1:2013 | Plastics Determination of temperature of deflection under load Part 1: General test method |
| ASTM E 328 : 2013 : REDLINE | Standard Test Methods for Stress Relaxation Tests for Materials and Structures |
| API STD 1104:2013 | WELDING OF PIPELINES AND RELATED FACILITIES |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ASTM C 518 : 2017 : REDLINE | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
| ISO 974:2000 | Plastics Determination of the brittleness temperature by impact |
| EN 288-1:1992/A1:1997 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES FOR FUSION WELDING |
| ASME PV CODE 9 : 2017 | BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS |
| EN 288-3:1992/A1:1997 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 3: WELDING PROCEDURE TESTS FOR THE ARC WELDING OF STEELS |
| API TR 17TR2 : 2003 | THE AGEING OF PA-11 IN FLEXIBLE PIPES |
| ISO 13628-3:2000 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 3: Through flowline (TFL) systems |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ASTM E 384 : 2017 : REDLINE | Standard Test Method for Microindentation Hardness of Materials |
| ISO 6892:1998 | Metallic materials Tensile testing at ambient temperature |
| ASTM D 1238 : 2013 : REDLINE | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
| NACE TM 01 77 : 2016 | LABORATORY TESTING OF METALS FOR RESISTANCE TO SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING IN H[2]S ENVIRONMENTS |
| ASTM D 792 : 2013 : REDLINE | Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
| ISO 11359-2:1999 | Plastics Thermomechanical analysis (TMA) Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature |
| ISO 9352:2012 | Plastics — Determination of resistance to wear by abrasive wheels |
| ISO 13628-11:2007 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 11: Flexible pipe systems for subsea and marine applications |
| API SPEC 17J : 2014 | SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
| ISO 75-2:2013 | Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
| ASTM D 1525 : 2017 | Standard Test Method for Vicat Softening Temperature of Plastics |
| ISO 13847:2013 | Petroleum and natural gas industries — Pipeline transportation systems — Welding of pipelines |
| ISO 11357-4:2014 | Plastics Differential scanning calorimetry (DSC) Part 4: Determination of specific heat capacity |
| EN 288-2:1992/A1:1997 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 2: WELDING PROCEDURE SPECIFICATION FOR ARC WELDING |
| API SPEC 16C : 2015 | CHOKE AND KILL EQUIPMENT |
| ASTM D 1044 : 2013 : REDLINE | Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion |
| ISO 180:2000 | Plastics Determination of Izod impact strength |
| ISO 3384:2005 | Rubber, vulcanized or thermoplastic Determination of stress relaxation in compression at ambient and at elevated temperatures |
| ASTM D 790 : 2017 : REDLINE | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials |
| ISO 10474:2013 | Steel and steel products — Inspection documents |
| ISO 307:2007 | Plastics Polyamides Determination of viscosity number |
| ISO 604:2002 | Plastics — Determination of compressive properties |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 15589-2:2012 | Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline transportation systems — Part 2: Offshore pipelines |
| ISO 13628-4:2010 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment |
| ISO 10423:2009 | Petroleum and natural gas industries Drilling and production equipment Wellhead and christmas tree equipment |
| ISO 62:2008 | Plastics Determination of water absorption |
| ASTM D 648 : 2016 | Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position |
| ISO 306:2013 | Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) |
| ASTM E 709 : 2015 : REDLINE | Standard Guide for Magnetic Particle Testing |
| ISO 899-1:2017 | Plastics — Determination of creep behaviour — Part 1: Tensile creep |
| ASTM D 695 : 2015 : REDLINE | Standard Test Method for Compressive Properties of Rigid Plastics |
| ASTM D 5028 : 2017 : REDLINE | Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis |
| ASTM D 570 : 1998 : R2018 | Standard Test Method for Water Absorption of Plastics |
| ISO 11357-1:2016 | Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles |
| ISO 178:2010 | Plastics Determination of flexural properties |
| ASTM D 2990 : 2017 : REDLINE | Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics |
| API 17D : 2011 | DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT |
| ASTM D 638 : 2014 : REDLINE | Standard Test Method for Tensile Properties of Plastics |
| ASTM D 746 : 2014 : REDLINE | Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact |
| ISO 527-1:2012 | Plastics Determination of tensile properties Part 1: General principles |
| ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
| ASTM D 1693 : 2015 : REDLINE | Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics |
| ASTM D 1418 : 2017 : REDLINE | Standard Practice for Rubber and Rubber Latices—Nomenclature |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
| ISO 13628-10:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 10: Specification for bonded flexible pipe |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.