Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

21-07-2004

Publisher

British Standards Institution

This International Standard specifies requirements for reciprocating positive-displacement pumps and pump units for use in the petroleum, petrochemical and natural gas industries. It is applicable to both direct-acting and power-frame types.

This International Standard is not applicable to controlled-volume pumps and rotary pumps.

NOTE For controlled-volume pumps see API Std 675; for rotary pumps see API Std 676.

Committee	MCE/6
DevelopmentNote	Supersedes 99/710921 DC (09/2004)
DocumentType	Standard
Pages	90
PublisherName	British Standards Institution
Status	Current
Supersedes	99/710921 DC : JUL 99

Standards	Relationship
DIN EN ISO 13710:2010-11 (Draft)	Identical
NEN EN ISO 13710 : 2004	Identical
I.S. EN ISO 13710:2004	Identical
NF EN ISO 13710 : 2004	Identical
ISO 13710:2004	Identical
SN EN ISO 13710 : 2005	Identical
NS EN ISO 13710 : 1ED 2004	Identical
NBN EN ISO 13710 : 2004	Identical
EN ISO 13710:2004	Identical
UNI EN ISO 13710 : 2005	Identical

ISO 13707:2000	Petroleum and natural gas industries Reciprocating compressors
ISO 9328-4:2011	Steel flat products for pressure purposes Technical delivery conditions Part 4: Nickel-alloy steels with specified low temperature properties
AGMA 2015-1 : A	ACCURACY CLASSIFICATION SYSTEM - TANGENTIAL MEASUREMENTS FOR CYLINDRICAL GEARS
EN 10269:2013	Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
ISO 15649:2001	Petroleum and natural gas industries — Piping
ISO 11972:2015	Corrosion-resistant cast steels for general applications
AGMA 9002 : B	BORES AND KEYWAYS FOR FLEXIBLE COUPLINGS (INCH SERIES)
ABMA 9 : 2015	LOAD RATINGS AND FATIGUE LIFE FOR BALL BEARINGS
ISO 7005-2:1988	Metallic flanges — Part 2: Cast iron flanges
ISO 8501-1:2007	Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
ISO 3506-1:2009	Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs
ASME PV CODE 9 : 2017	BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS
EN 10028-3:2017	Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
EN 10273:2016	Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
ISO 14120:2015	Safety of machinery Guards General requirements for the design and construction of fixed and movable guards
API 546 : 2008	BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER
IEEE 841-2009	IEEE Standard for Petroleum and Chemical Industry--Premium-Efficiency, Severe-Duty, Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors--Up to and Including 370 kW (500 hp)
ISO 9725:2017	Nickel and nickel alloy forgings
ISO 1083:2004	Spheroidal graphite cast irons - Classification
ASME PV CODE 8 DIV 1 : 2017	BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1
EN 10088-3:2014	Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
ISO 1328-1:2013	Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
ISO 724:1993	ISO general-purpose metric screw threads — Basic dimensions
API 614 : 2008	LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES
EN 10213-2 : 1995	TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 2: STEEL GRADES FOR USE AT ROOM TEMPERATURE AND ELEVATED TEMPERATURES
ASME B16.11 : 2016	FORGED FITTINGS, SOCKET-WELDING AND THREADED
ASTM A 516/A516M : 2017 : REDLINE	Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
AGMA 6010 : F	STANDARD FOR SPUR, HELICAL, HERRINGBONE AND BEVEL ENCLOSED DRIVES
ASME B16.42 : 2016	DUCTILE IRON PIPE FLANGES AND FLANGED FITTINGS - CLASSES 150 AND 300
ASME B31.3:2016	PROCESS PIPING
ISO 1940-1:2003	Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances
ISO 4991:2015	Steel castings for pressure purposes
ISO 6708:1995	Pipework components Definition and selection of DN (nominal size)
EN 13835:2012	Founding - Austenitic cast irons
EN 10088-2:2014	STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
ISO 9329-4:1997	Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 4: Austenitic stainless steels
ISO 281:2007	Rolling bearings Dynamic load ratings and rating life
ISO 2892:2007	Austenitic cast irons Classification
EN 10028-2:2017	Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
EN 10028-7:2016	Flat products made of steels for pressure purposes - Part 7: Stainless steels
EN 10095:1999	Heat resisting steels and nickel alloys
NACE MR 01 75 : 2003	METALS FOR SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING RESISTANCE IN SOUR OILFIELD ENVIRONMENTS
EN 10283:2010	Corrosion resistant steel castings
HI 6.6 : 2015	RECIPROCATING PUMP TESTS
ISO 262:1998	ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
ASME B16.1 : 2015	Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250
ASME B1.20.1 : 2013(R2018)	PIPE THREADS, GENERAL PURPOSE (INCH)
EN 10272:2016	Stainless steel bars for pressure purposes
ASTM A 563 : 2015 : REDLINE	Standard Specification for Carbon and Alloy Steel Nuts
ISO 9329-2:1997	Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 2: Unalloyed and alloyed steels with specified elevated temperature properties
ISO 683-18:2014	Heat-treatable steels, alloy steels and free-cutting steels — Part 18: Bright steel products
EN 10222-5:2017	Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
EN 10250-4:1999	Open die steel forgings for general engineering purposes - Part 4: Stainless steels
EN 953:1997+A1:2009	Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
NFPA 70 : 2017	NATIONAL ELECTRICAL CODE
EN 10222-2:2017	Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties
EN 10213-3 : 1995	TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 3: STEEL GRADES FOR USE AT LOW TEMPERATURES
EN 1563:2011	Founding - Spheroidal graphite cast irons
API 526 : 2017	FLANGED STEEL PRESSURE-RELIEF VALVES
ISO 286-2:2010	Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
ASME B16.5 : 2017	PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD
EN 10083-1:2006	Steels for quenching and tempering - Part 1: General technical delivery conditions
ASME PV CODE 5 : 2017	BOILER AND PRESSURE VESSEL CODE - NONDESTRUCTIVE EXAMINATION
EN 10083-2:2006	Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels
ISO 261:1998	ISO general purpose metric screw threads General plan
API STD 541 : 2014	FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER
ISO 5753:1991	Rolling bearings — Radial internal clearance
ISO 9327-4:1999	Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 4: Weldable fine grain steels with high proof strength
NFPA 30 : 2018	FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE
ISO 185:2005	Grey cast irons Classification
ISO 7005-1:2011	Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems
API 675 : 2012	POSITIVE DISPLACEMENT PUMPS - CONTROLLED VOLUME FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
AWS D1.1 : 2000	STRUCTURAL WELDING CODE - STEEL
ASTM A 515/A515M : 2017 : REDLINE	Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
ISO 9327-5:1999	Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 5: Stainless steels
ASME B16.47 : 2017	LARGE DIAMETER STEEL FLANGES: NPS 26 THROUGH NPS 60 METRIC/INCH STANDARD
EN 10213-4 : 1995	TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 4: AUSTENITIC AND AUSTENITIC-FERRITIC STEEL GRADES
EN 10208-1:2009	Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 1: Pipes of requirement class A
ISO 3506-2:2009	Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts
ISO 9327-2:1999	Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 2: Non-alloy and alloy (Mo, Cr and CrMo) steels with specified elevated temperature properties
ISO 3448:1992	Industrial liquid lubricants — ISO viscosity classification
ISO 16330:2003	Reciprocating positive displacement pumps and pump units Technical requirements
ISO 228-1:2000	Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
ISO 683-1:2016	Heat-treatable steels, alloy steels and free-cutting steels Part 1: Non-alloy steels for quenching and tempering
ABMA 7 : 1995	SHAFT AND HOUSING FITS FOR METRIC RADIAL BALL AND ROLLER BEARINGS (EXCEPT TAPERED ROLLER BEARINGS) CONFORMING TO BASIC BOUNDARY PLAN
EN 12451:2012	Copper and copper alloys - Seamless, round tubes for heat exchangers
EN 1561:2011	Founding - Grey cast irons
HI 8.1 - 8.5 : 2015	DIRECT-ACTING (STEAM) PUMPS - FOR NOMENCLATURE, DEFINITIONS, APPLICATION, AND OPERATION