BS EN ISO 19902 : 2007
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
01-01-2007
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Abbreviated terms
6 Overall considerations
7 General design requirements
8 Actions for pre-service and removal situations
9 Actions for in-place situations
10 Accidental situations
11 Seismic design considerations
12 Structural modelling and analysis
13 Strength of tubular members
14 Strength of tubular joints
15 Strength and fatigue resistance of other
structural components
16 Fatigue
17 Foundation design
18 Corrosion control
19 Materials
20 Welding, fabrication and weld inspection
21 Quality control, quality assurance and
documentation
22 Loadout, transportation and installation
23 In-service inspection and structural
integrity management
24 Assessment of existing structures
25 Structure reuse
Annex A (informative) - Additional information and
guidance
Annex B (informative) - CTOD testing procedures
Annex C (informative) - Material category approach
Annex D (informative) - Design class approach
Annex E (informative) - Welding and weld inspection
requirements - Material category approach
Annex F (informative) - Welding and weld inspection
requirements - Design class approach
Annex G (normative) - Fabrication tolerances
Annex H (informative) - Regional information
Bibliography
Describes requirements and provides recommendations applicable to the following types of fixed steel offshore structures for the petroleum and natural gas industries: - caissons, free-standing and braced; - jackets; - monotowers; and - towers.
| Committee |
B/525/12
|
| DevelopmentNote |
Supersedes 04/19985213 DC. (02/2008) 2007 Edition Re-Issued in October 2013 & incorporates AMD 1 2013. Supersedes 12/30257174 DC. (10/2013)
|
| DocumentType |
Standard
|
| Pages |
638
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NEN EN ISO 19902 : 2007 AMD 1 2013 | Identical |
| I.S. EN ISO 19902:2007 | Identical |
| NF EN ISO 19902 : 2011 AMD 1 2014 | Identical |
| ISO 19902:2007 | Identical |
| NS EN ISO 19902 : 2007 AMD 1 2013 | Identical |
| EN ISO 19902:2007/A1:2013 | Identical |
| DIN EN ISO 19902:2014-01 | Identical |
| ONORM EN ISO 19902 : 2013 | Identical |
| BS 6349-1-2(2016) : 2016 | MARITIME WORKS - PART 1-2: GENERAL - CODE OF PRACTICE FOR ASSESSMENT OF ACTIONS |
| BS 7608(2014) : 2014 | GUIDE TO FATIGUE DESIGN AND ASSESSMENT OF STEEL PRODUCTS |
| 13/30102062 DC : 0 | BS 7608:2013 - GUIDE TO FATIGUE DESIGN AND ASSESSMENT OF STEEL PRODUCTS |
| W59-13 | Welded steel construction (metal arc welding) |
| ISO 19901-6:2009 | Petroleum and natural gas industries — Specific requirements for offshore structures — Part 6: Marine operations |
| ISO 19901-2:2017 | Petroleum and natural gas industries Specific requirements for offshore structures Part 2: Seismic design procedures and criteria |
| API 2A WSD : 2014 | PLANNING, DESIGNING, AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - WORKING STRESS DESIGN |
| ASTM A 573/A573M : 2013 : REDLINE | Standard Specification for Structural Carbon Steel Plates of Improved Toughness |
| ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
| ISO 19900:2013 | Petroleum and natural gas industries General requirements for offshore structures |
| CSA S473 : 2004 | STEEL STRUCTURES |
| ASTM A 537/A537M : 2013 | Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel |
| NACE RP 03 87 : 0 | METALLURGICAL AND INSPECTION REQUIREMENTS FOR CAST SACRIFICIAL ANODES FOR OFFSHORE APPLICATIONS |
| ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
| ISO 12944-5:2007 | Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 5: Protective paint systems |
| API 2V : 2004 | DESIGN OF FLAT PLATE STRUCTURES |
| ISO 19901-7:2013 | Petroleum and natural gas industries — Specific requirements for offshore structures — Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units |
| ASTM A 516/A516M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service |
| EN 10025:1990/A1:1993 | HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
| EN 12473:2014 | General principles of cathodic protection in seawater |
| ISO 19903:2006 | Petroleum and natural gas industries Fixed concrete offshore structures |
| ISO 17776:2016 | Petroleum and natural gas industries Offshore production installations Major accident hazard management during the design of new installations |
| NORSOK M-120:2008 | MATERIAL DATA SHEETS FOR STRUCTURAL STEEL |
| NACE RP 01 76 : 2003 | CORROSION CONTROL OF STEEL FIXED OFFSHORE STRUCTURES ASSOCIATED WITH PETROLEUM PRODUCTION |
| EN 473:2008 | Non-destructive testing - Qualification and certification of NDT personnel - General principles |
| API 5L : 2012 | LINE PIPE |
| ASTM A 578/A578M : 2017 : REDLINE | Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications |
| ISO 19901-4:2016 | Petroleum and natural gas industries Specific requirements for offshore structures Part 4: Geotechnical and foundation design considerations |
| BS EN 1993-1-1 : 2005 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
| ISO 19901-3:2014 | Petroleum and natural gas industries — Specific requirements for offshore structures — Part 3: Topsides structure |
| ANSI A58.1 : 1982 | DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES, MINIMUM, |
| ISO 19906:2010 | Petroleum and natural gas industries Arctic offshore structures |
| ISO 9004:2009 | Managing for the sustained success of an organization A quality management approach |
| API Q1 : 2013 | SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR MANUFACTURING ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRY |
| AWS QC1 : 2007 | STANDARD FOR AWS CERTIFICATION OF WELDING INSPECTORS |
| W178.2-14 | Certification of welding inspectors |
| EN 12495 : 2000 | CATHODIC PROTECTION FOR FIXED STEEL OFFSHORE STRUCTURES |
| ENV 1991-2-4 : 1995 | EUROCODE 1: BASIS OF DESIGN AND ACTIONS ON STRUCTURES - ACTIONS ON STRUCTURES - WIND ACTIONS (TOGETHER WITH UNITED KINGDOM NATIONAL APPLICATION DOCUMENT) |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 12135:2016 | Metallic materials Unified method of test for the determination of quasistatic fracture toughness |
| BS 3692:2001 | ISO metric precision hexagon bolts, screws and nuts. Specification |
| ASTM A 139/A139M : 2016 : REDLINE | Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over) |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| EN 10225:2009 | Weldable structural steels for fixed offshore structures - Technical delivery conditions |
| EN 1994-2:2005/AC:2008 | EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 2: GENERAL RULES AND RULES FOR BRIDGES |
| API 2A LRFD : 1993 | RECOMMENDED PRACTICE FOR PLANNING, DESIGNING AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - LOAD AND RESISTANCE FACTOR DESIGN |
| AWS D1.1/D1.1M : 2015 | STRUCTURAL WELDING CODE-STEEL |
| ISO 19901-5:2016 | Petroleum and natural gas industries Specific requirements for offshore structures Part 5: Weight control during engineering and construction |
| ISO 19901-1:2015 | Petroleum and natural gas industries Specific requirements for offshore structures Part 1: Metocean design and operating considerations |
| EN 1990:2002/A1:2005/AC:2010 | EUROCODE - BASIS OF STRUCTURAL DESIGN |
| ISO 13702:2015 | Petroleum and natural gas industries — Control and mitigation of fires and explosions on offshore production installations — Requirements and guidelines |
| ISO 19905-1:2016 | Petroleum and natural gas industries — Site-specific assessment of mobile offshore units — Part 1: Jack-ups |
| CSA S471 : 2004 | GENERAL REQUIREMENTS, DESIGN CRITERIA, THE ENVIRONMENT, AND LOADS |
| BS 7361-1:1991 | Cathodic protection Code of practice for land and marine applications |
| W178.1-14 | Certification of welding inspection organizations |
| ISO 10414-1:2008 | Petroleum and natural gas industries — Field testing of drilling fluids — Part 1: Water-based fluids |
| NORSOK M 501 : REV 6 | SURFACE PREPARATION AND PROTECTIVE COATING |
| NS 3472 : 2001 | STEEL STRUCTURES - DESIGN RULES |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.