BS EN ISO 2431:2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
24-10-2019
English
31-12-2011
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Temperature considerations
5 Apparatus
6 Sampling
7 Procedure
8 Marking of products tested
9 Precision
10 Test report
Annex A (normative) - Checking flow cups for wear and tear
Annex B (informative) - Conversion of flow times from one
temperature to another
Bibliography
Describes a method for determining the flow time of paints, varnishes and related products that can be used to control consistency.
Committee |
STI/10
|
DevelopmentNote |
Supersedes BS EN 535 and 91/57472 DC. (03/2002) Supersedes BS 3900-A6(1996). (12/2011)
|
DocumentType |
Standard
|
Pages |
26
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
ONORM EN ISO 2431 : 2012 | Identical |
UNE-EN ISO 2431:2012 | Identical |
I.S. EN ISO 2431:2011 | Identical |
NS EN ISO 2431 : 2011 | Identical |
NEN EN ISO 2431 : 2011 | Identical |
SN EN ISO 2431 : 2012 | Identical |
NBN EN ISO 2431 : 2012 | Identical |
NF EN ISO 2431 : 2011 | Identical |
EN ISO 2431:2011 | Identical |
UNI EN ISO 2431 : 2012 | Identical |
DIN EN ISO 2431:2012-03 | Identical |
ISO 2431:2011 | Identical |
BS 2X 33:1998 | Specification for two component epoxy primer for aerospace purposes |
DEFSTAN 80-27/5(2009) : 2009 | PAINT, AMMUNITION FINISHING, BRUSHING, SPRAYING AND DIPPING TYPES: SEMI-GLOSS; MATT |
DEFSTAN 80-65/3(2009) : 2009 | PAINT, FINISHING, FOR THE INTERIOR OF JERRICANS |
DEFSTAN 80-212/3(2011) : 2011 | PAINT, FINISHING, POLYURETHANE, ABRASION RESISTING, LOW VOC, MULTI-PACK |
DEFSTAN 80-214/2(2002) : 2002 | PAINT, FINISH, SELECTIVELY STRIPPABLE, ACRYLIC TYPES: BRUSHING SPRAYING |
DEFSTAN 80-164/3(2009) : 2009 | PAINT, SYSTEM, FLUORESCENT |
DEFSTAN 80-158/2(2000) : 2000 AMD 1 2001 | PAINT, SYSTEM, EROSION RESISTING FOR AIRCRAFT POLYURETHANE TWO-PACK VOC COMPLIANT |
DEFSTAN 80-134/5(2014) : 2014 | PAINT SYSTEM, ANTI-SLIP FOR SHIPS DECKING, MULTI-PACK - TYPE 1: MEDIUM TEXTURE - HANGAR DECKS, WEATHER DECKS TYPE 2: ROUGH TEXTURE - FLIGHT DECKS |
DEFSTAN 80-27/4(1998) : 1998 | PAINT, AMMUNITION FINISHING, BRUSHING, SPRAYING AND DIPPING TYPES: SEMI GLOSS MATT |
DEFSTAN 80-207/2(2003) : 2003 | PAINT, PRIMING, ZINC CHROMATE, NON AIRCRAFT USE, LOW VOC SINGLE OR MULTI-PACK |
DEFSTAN 80-97/4(2006) : 2006 | PAINT, SYSTEM, FOR THE INTERIOR OF BULK FUEL TANKS AND FITTINGS MULTI-PACK |
DEFSTAN 80-138/3(2007) : 2007 | VARNISH, POLYURETHANE, MULTI-PACK TYPES: MATT AND GLOSS |
DEFSTAN 05-133(PT1)/1(2011) : 2011 | METHODS FOR TESTING PAINTS, CHEMICALS AND ASSOCIATED PRODUCTS - PART 1: PAINTS AND ALLIED PRODUCTS |
DEFSTAN 80-208/2(2001) : 2001 AMD 1 2003 | PAINT, FINISHING, POLYURETHANE MULTI-PACK, MATT, IRR, CHEMICAL AGENT RESISTANT, NON AIRCRAFT USE, LOW VOC |
DEFSTAN 80-55/3(1997) : 1997 | PAINT, FINISHING, AMMUNITION, GENERAL SERVICE, QUICK DRYING, SEMI-GLOSS TYPES: BRUSHING, SPRAYING, DIPPING |
DEFSTAN 80-97/3(2000) : 2000 | PAINT, SYSTEM, FOR THE INTERIOR OF BULK FUEL TANK AND FITTINGS, TWO PACK |
DEFSTAN 80-25/4(1997) : 1997 | PAINT, AMMUNITION FINISHING, STOVING SPRAYING AND DIPPING TYPES: SEMI-GLOSS MATT |
DEFSTAN 80-138/4(2009) : 2009 | VARNISH, POLYURETHANE, MULTI-PACK - TYPES: MATT AND GLOSS |
DEFSTAN 80-25/5(2009) : 2009 | PAINT, AMMUNITION FINISHING, STOVING SPRAYING AND DIPPING - TYPES: SEMI-GLOSS, MATT |
DEFSTAN 80-124/3(2017) : 2017 | PAINT, PRIMING, DEFENCE EQUIPMENT, STOVING - TYPES: SPRAYING AND DIPPING |
DEFSTAN 80-158/4(2010) : 2010 | PAINT, FINISH, EROSION RESISTING FOR AIRCRAFT, POLYURETHANE, MULTI-PACK, VOC COMPLIANT |
DEFSTAN 80-124/2(2008) : 2008 | PAINT, PRIMING, DEFENCE EQUIPMENT, STOVING - TYPES: SPRAYING AND DIPPING |
DEFSTAN 80-065/4(2017) : 2017 | PAINT, FINISHING, FOR THE INTERIOR OF JERRICANS |
DEFSTAN 80-158/3(2004) : 2004 | PAINT SYSTEM, EROSION RESISTING FOR AIRCRAFT, POLYURETHANE, MULTI-PACK, VOC COMPLIANT |
BS X 37:2004 | Intumescent paint for aerospace purposes. Specification |
BS 2X 34:1998 | Specification for two component polyurethane finish for aerospace purposes |
DEFSTAN 80-208/3(2005) : 2005 | PAINT FINISHING, POLYURETHANE MULTI-PACK, MATT, IRR, CHEMICAL AGENT RESISTANT, NON AIRCRAFT USE, LOW VOC |
DEFSTAN 80-206/3(2009) : 2009 | PAINT, PRIMING, ZINC PHOSPHATE, NON-AIRCRAFT USE, LOW VOC SINGLE OR MULTI-PACK |
DEFSTAN 80-207/3(2009) : 2009 | PAINT, PRIMING, ZINC CHROMATE, NON-AIRCRAFT USE, LOW VOC SINGLE OR MULTI-PACK |
DEFSTAN 80-209/3(2005) : 2005 | PAINT FINISHING, POLYURETHANE, MULTI-PACK, GLOSS, CHEMICAL AGENT RESISTANT, NON AIRCRAFT USE, LOW VOC |
14/30290245 DC : 0 | BS 2X35:2003 + A1 - SELECTIVELY REMOVABLE INTERMEDIATE COATING FOR AEROSPACE PURPOSES |
BS X 35:1998 | Specification for selectively removable intermediate coating for aerospace purposes |
BS 4164:2002 | Specification for coal-tar-based hot-applied coating materials for protecting iron and steel, including a suitable primer |
03/311251 DC : DRAFT JULY 2003 | BS X 37 - INTUMESCENT PAINT FOR AEROSPACE PURPOSES |
BS 2X 32:1998 | Specification for pre-treatment etch primer for aerospace purposes |
BS 2X 35(2003) : 2003 | SELECTIVELY REMOVABLE INTERMEDIATE COATING FOR AEROSPACE PURPOSES |
DEFSTAN 80-161/2(2002) : 2002 | PAINT, FINISHING, SPRAYING, EPOXY, MULTI-PACK |
BS 6150(2006) : 2006 | PAINTING OF BUILDINGS - CODE OF PRACTICE |
ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
ISO 3219:1993 | Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination of viscosity using a rotational viscometer with defined shear rate |
ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes Sampling |
ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
ISO 1513:2010 | Paints and varnishes Examination and preparation of test samples |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.