• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

BS EN ISO 3672-2:2001

Current
Current

The latest, up-to-date edition.

Plastics. Unsaturated-polyester resins (UP-R) Preparation of test specimens and determination of properties
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

14-05-2002

Foreword
Introduction
1 Scope
2 Normative references
3 Preparation of test specimens
  3.1 General
  3.2 Pretreatment of materials
  3.3 Preparation of the sheets
  3.4 Cutting out test specimens
4 Conditioning of test specimens
5 Determination of properties

Gives the methods of preparation of test specimens and test methods used for the determination of the properties of unsaturated-polyester resins. Also gives the requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing. The properties of crosslinked unsaturated-polyester resins have been selected from the general test methods in ISO 10350-1. Other test methods in wide use for, or of particular significance to, unsaturated-polyester resins (particularly properties useful for the processing of non-crosslinked resins) are also included in this part of ISO 3672.

Committee
PRI/42
DevelopmentNote
Renumbers and supersedes BS ISO 3672-2 Supersedes 96/121473 DC. (11/2001) 2001 Version incorporates amendment 13326 to BS ISO 3672-2. (10/2005)
DocumentType
Standard
Pages
22
PublisherName
British Standards Institution
Status
Current
Supersedes

IEC 60243-1:2013 Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies
IEC 60695-11-20:2015 Fire hazard testing - Part 11-20: Test flames - 500 W flame test method
IEC 60112:2003+AMD1:2009 CSV Method for the determination of the proof and the comparative tracking indices of solid insulating materials
ISO 2719:2016 Determination of flash point Pensky-Martens closed cup method
ISO 6603-2:2000 Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2: Instrumented impact testing
ISO 2535:2001 Plastics Unsaturated-polyester resins Measurement of gel time at ambient temperature
EN ISO 62:2008 Plastics - Determination of water absorption (ISO 62:2008)
ISO 2114:2000 Plastics (polyester resins) and paints and varnishes (binders) Determination of partial acid value and total acid value
ISO 3521:1997 Plastics — Unsaturated polyester and epoxy resins — Determination of overall volume shrinkage
EN ISO 8256:2004 Plastics - Determination of tensile-impact strength (ISO 8256:2004)
ISO 3167:2014 Plastics Multipurpose test specimens
EN ISO 2114:2000/AC:2005 PLASTICS (POLYESTER RESINS) AND PAINTS AND VARNISHES (BINDERS) - DETERMINATION OF PARTIAL ACID VALUE AND TOTAL ACID VALUE
IEC 60250:1969 Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths
ISO 3219:1993 Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination of viscosity using a rotational viscometer with defined shear rate
ISO 14848:1998 Plastics — Unsaturated-polyester resins — Determination of reactivity at 130 degrees C
EN 59:2016 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
ISO 6271:2015 Clear liquids Estimation of colour by the platinum-cobalt colour scale
ISO 10350-1:2017 Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials
EN ISO 178:2010/A1:2013 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013)
ISO 8256:2004 Plastics — Determination of tensile-impact strength
EN ISO 1675:1998 Plastics - Liquid resins - Determination of density by the pyknometer method (ISO 1675:1985)
EN ISO 604 : 2003 PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES (ISO 604:2002)
ISO 11359-2:1999 Plastics Thermomechanical analysis (TMA) Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
ISO 3672-1:2000 Plastics Unsaturated-polyester resins (UP-R) Part 1: Designation system
EN ISO 2818:1996 PLASTICS - PREPARATION OF TEST SPECIMENS BY MACHINING
EN ISO 527-1:2012 Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012)
EN ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010)
ISO 75-2:2013 Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
ISO 527-2:2012 Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
ISO 11357-2:2013 Plastics Differential scanning calorimetry (DSC) Part 2: Determination of glass transition temperature and glass transition step height
ISO 1523:2002 Determination of flash point — Closed cup equilibrium method
EN ISO 75-2:2013 Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013)
ISO 4615:1979 Plastics Unsaturated polyesters and epoxide resins Determination of total chlorine content
IEC 60296:2012 RLV Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear
EN ISO 3167:2014 Plastics - Multipurpose test specimens (ISO 3167:2014)
EN ISO 3521 : 1999 Plastics - Unsaturated polyester and epoxy resins - Determination of overall volume shrinkage (ISO 3521:1997)
ISO 4630:2015 Clear liquids Estimation of colour by the Gardner colour scale
IEC 60093:1980 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
ISO 2554:1997 Plastics — Unsaturated polyester resins — Determination of hydroxyl value
ISO 2577:2007 Plastics Thermosetting moulding materials Determination of shrinkage
ISO 1675:1985 Plastics — Liquid resins — Determination of density by the pyknometer method
IEC 60695-11-10:2013 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
EN ISO 3219:1994 Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate (ISO 3219:1993)
ISO 291:2008 Plastics Standard atmospheres for conditioning and testing
EN ISO 6603-2:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test (ISO 6603-2:2000)
ISO 604:2002 Plastics — Determination of compressive properties
ISO 179-1:2010 Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
EN ISO 4589-2:2017 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017)
ISO 62:2008 Plastics Determination of water absorption
EN ISO 291:2008 Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008)
EN ISO 2554 : 1999 PLASTICS - UNSATURATED POLYESTER RESINS - DETERMINATION OF HYSROXYL VALUE
EN 22719 : 1993 PETROLEUM PRODUCTS AND LUBRICANTS - DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD
ISO 4589-2:2017 Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
ISO 2818:1994 Plastics — Preparation of test specimens by machining
ISO 4901:2011 Reinforced plastics based on unsaturated-polyester resins Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography
ISO 760:1978 Determination of water Karl Fischer method (General method)
EN ISO 4615 : 1999 Plastics - Unsaturated polyesters and epoxide resins - Determination of total chlorine content (ISO 4615:1979)
ISO 178:2010 Plastics Determination of flexural properties
EN ISO 2535 : 2002 PLASTICS - UNSATURATED POLYESTER RESINS - MEASUREMENT OF GEL TIME AT AMBIENT TEMPERATURE (ISO 2535:2001)
ISO 527-1:2012 Plastics Determination of tensile properties Part 1: General principles

View more information
£142.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.