• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

BS EN ISO 3691-1:2015

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Industrial trucks. Safety requirements and verification Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks
Available format(s)

Hardcopy , PDF

Superseded date

30-06-2020

Language(s)

English

Published date

31-07-2016

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Safety requirements and/or protective measures
5 Verification of safety requirements and/or protective
  measures
6 Information for use
Annex A (normative) - Determination of driving direction
        and rated capacity
Annex B (informative) - List of significant hazards
Annex ZA (informative) - Relationship between this
         European Standard and the Essential
         Requirements of EU Directive 2006/42/EC

Provides safety requirements and the means for their verification for the self-propelled industrial trucks.

This part of ISO3691 gives safety requirements and the means for their verification for the following types of self-propelled industrial trucks (hereafter referred to as trucks), as defined in ISO5053 : industrial counterbalanced trucks; reach trucks with retractable mast or retractable fork arm carriage; straddle trucks; pallet-stacking trucks; high-lift platform trucks; trucks with elevating operator position up to 1200mm; side-loading trucks (one side only); lateral-stacking trucks (both sides), and lateral- and front-stacking trucks; pallet trucks; bidirectional and multidirectional trucks; tractors with a drawbar pull up to and including 20000N; rough-terrain counterbalanced trucks; industrial trucks powered by battery, diesel, gasoline or LPG (liquefied petroleum gas). NOTE1 Trucks powered by CNG (compressed natural gas) are not dealt with. It is intended that CNG and other power sources be addressed in future revisions of this part of ISO3691 . For trucks with an elevating operator position of more than 1200mm and/or trucks designed to travel with an elevated load of more than 1200mm, this part of ISO3691 is intended to be used in conjunction with ISO3691‑3 . NOTE2 ISO3691‑3 is not applicable to counterbalanced fork lift trucks or trucks intended for container handling. NOTE3 Some low-level order pickers with an elevating operator\'s position up to and including 1200mm lift height can be equipped with an additional lifting device to lift the load to a maximum lift height of 1800mm. This part of ISO3691 is not applicable to self-propelled variable-reach trucks, driverless trucks or burden carriers, which are covered in ISO3691‑2 , ISO3691‑4 and ISO3691‑6 , respectively. It is not applicable to industrial trucks operating in severe conditions (e.g. extreme climates, freezer applications, hazardous environments), where special precautions can be necessary. Regional requirements, additional to the requirements given in this part of ISO3691 , are addressed in ISO/TS3691‑7 and ISO/TS3691‑8 . This part of ISO3691 deals with all significant hazards, hazardous situations or hazardous events, as listed in AnnexB, with the exception of the following, relevant to the applicable machines when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. It does not establish requirements for hazards that can occur during construction, when handling suspended loads that can swing freely, when using trucks on public roads, when operating in potentially explosive atmospheres, when using trucks in very narrow aisles with clearance of less than 500mm to the racks, arising from a non-ergonomic body attitude when driving sit-on trucks, load trailing, during travelling with unladen trucks having a rated capacity of more than 10000kg, due to visibility concerns, due to overload. NOTE4 For the purposes of this part of ISO3691 , fork arms, load platforms and integrated attachments are considered to be parts of the industrial truck. Attachments mounted on the load carrier or on the fork arms which are removable by the user are not considered to be part of the industrial truck. Requirements for attachments are given in the appropriate clauses.

Committee
MHE/7
DevelopmentNote
Supersedes BS EN 1551 and 00/702566 DC. (09/2012) Together with BS EN ISO 3691-6, it supersedes BS EN 1726-1. (11/2013)
DocumentType
Standard
Pages
56
PublisherName
British Standards Institution
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
EN ISO 3691-1:2015/AC:2016 Identical
ISO 3691-1:2011 Identical

ISO 13284:2003 Fork-lift trucks — Fork-arm extensions and telescopic fork arms — Technical characteristics and strength requirements
ISO 3691-5:2014 Industrial trucks Safety requirements and verification Part 5: Pedestrian-propelled trucks
ISO 6055:2004 Industrial trucks — Overhead guards — Specification and testing
ISO 3411:2007 Earth-moving machinery Physical dimensions of operators and minimum operator space envelope
ISO 22915-8:2008 Industrial trucks Verification of stability Part 8: Additional stability test for trucks operating in the special condition of stacking with mast tilted forward and load elevated
ISO 22915-20:2008 Industrial trucks — Verification of stability — Part 20: Additional stability test for trucks operating in the special condition of offset load, offset by utilization
ISO 22915-10:2008 Industrial trucks — Verification of stability — Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices
ISO 22915-3:2014 Industrial trucks Verification of stability Part 3: Reach and straddle trucks
ISO 22915-2:2008 Industrial trucks Verification of stability Part 2: Counterbalanced trucks with mast
ISO 22915-21:2009 Industrial trucks Verification of stability Part 21: Order-picking trucks with operator position elevating above 1 200 mm
ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
ISO 3795:1989 Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials
ISO 3287:1999 Powered industrial trucks — Symbols for operator controls and other displays
ISO 15870:2000 Powered industrial trucks — Safety signs and hazard pictorials — General principles
ISO 2328:2011 Fork-lift trucks — Hook-on type fork arms and fork arm carriages — Mounting dimensions
ISO 5053:1987 Powered industrial trucks Terminology
ISO 21281:2005 Construction and layout of pedals of self-propelled sit-down rider-controlled industrial trucks Rules for the construction and layout of pedals
IEC 60695-11-10:2013 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
ISO 22915-4:2009 Industrial trucks Verification of stability Part 4: Pallet stackers, double stackers and order-picking trucks with operator position elevating up to and including 1 200 mm lift height
ISO 22915-7:2016 Industrial trucks Verification of stability Part 7: Bidirectional and multidirectional trucks
ISO 22915-1:2016 Industrial trucks — Verification of stability — Part 1: General
ISO 6292:2008 Powered industrial trucks and tractors Brake performance and component strength
ISO 20898:2008 Industrial trucks — Electrical requirements
ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
ISO 2330:2002 Fork-lift trucks — Fork arms — Technical characteristics and testing
ISO 24134:2006 Industrial trucks — Additional requirements for automated functions on trucks
ISO 22915-11:2011 Industrial trucks — Verification of stability — Part 11: Industrial variable-reach trucks
ISO 24135-1:2006 Industrial trucks — Specifications and test methods for operator restraint systems — Part 1: Lap-type seat belts
ISO 2867:2011 Earth-moving machinery Access systems
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
ISO 15871:2000 Industrial trucks Specifications for indicator lights for container handling and grappler arm operations

View more information
£260.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.