• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

BS ISO 13577-2:2014

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Industrial furnaces and associated processing equipment. Safety Combustion and fuel handling systems
Available format(s)

Hardcopy , PDF

Superseded date

04-01-2024

Language(s)

English

Published date

30-09-2014

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Safety requirements, measures and verification means
5 Verification of the safety requirements and/or measures
6 Information for Use
Annex A (informative) - List of significant hazards
Annex B (informative) - Typical examples of fuels
Annex C (informative) - Typical example of piping
        and components
Annex D (informative) - Methods for burner start-up
Annex E (normative) - Maximum allowed pressure
Annex F (informative) - Examples for the determination
        of safety integrity level (SIL) using the risk graph
        method
Annex G (normative) - Requirements specific to Japan
Annex H (normative) - Requirements specific to the USA
Annex I (normative) - Requirements for Europe and
        associated countries
Bibliography

Defines the safety requirements for combustion and fuel handling systems that are part of industrial furnaces and associated processing equipment (TPE).

This part of ISO13577 specifies the safety requirements for combustion and fuel handling systems that are part of industrial furnaces and associated processing equipment (TPE).

NOTE The general safety requirements common to TPE are provided in ISO13577-1 (See introduction).

This part of ISO13577 deals with significant hazards, hazardous situations and events relevant to combustion and fuel handling systems as listed in AnnexA, when used as intended and under the conditions foreseen by the manufacturer.

This part of ISO13577 covers:

  • fuel pipework downstream of and including the manual isolating valve;

  • combustion air supply (including oxygen and oxygen enriched combustion air) and flue gas system;

  • burner(s), burner system and ignition device;

  • functional requirements for safety related control system.

This part of ISO13577 applies to any oxidation with air or other gases containing free oxygen of gaseous and liquid fuels or any combustion of them to release thermal energy in TPE.

For thermal or catalytic post combustion and waste incineration, this part of ISO13577 applies only to auxiliary burners designed to start-up and/or support the process.

The pressure hazard of the piping and components covered by this part of ISO13577 is within the maximum pressure/size relationship of categoryI as described in normative AnnexE.

This part of ISO13577 also gives the necessary requirements regarding information for use.

This part of ISO13577 does not cover hazards from heating generated by electricity.

This part of ISO13577 does not deal with the hazards created by the release of flammable substances from the products processed in the TPE.

This part of ISO13577 is not applicable to combustion and fuel handling systems:

  • of welding machines;

  • up-stream of the TPE manual isolating valve.

This part of ISO13577 is not applicable to electrical cabling and power cabling upstream of the TPE control panel/protective system.

Committee
RHE/13
DevelopmentNote
Supersedes 13/30231511 DC. (09/2014)
DocumentType
Standard
Pages
106
PublisherName
British Standards Institution
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
ISO 13577-2:2014 Identical

EN 730-2:2002 Gas welding equipment - Safety devices - Part 2: Not incorporating a flame (flashback) arrestor
EN 10208-2:2009 Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B
EN 1539:2015 Dryers and ovens, in which flammable substances are released - Safety requirements
EN 13480-2:2017 Metallic industrial piping - Part 2: Materials
FM 3510 : 2000 FLOW AND PRESSURE SAFETY SWITCHES
EN 881:2004 Chemicals used for treatment of water intended for human consumption - Aluminium chloride (monomeric), aluminium chloride hydroxide (monomeric) and aluminium chloride hydroxide sulfate (monomeric)
ISO 7005-2:1988 Metallic flanges — Part 2: Cast iron flanges
ISO 6976:2016 Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition
NFPA 31 : 2016 INSTALLATION OF OIL-BURNING EQUIPMENT
ISO 8434-1:2007 Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectors
ASME B31.1 : 2016 POWER PIPING
EN 12067-2:2004 Gas/air ratio controls for gas burners and gas burning appliances - Part 2: Electronic types
CFR 29(PTS1900-1910) : 0 LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
FM 3545 : 1998 TEMPERATURE LIMIT AND SUPERVISORY SWITCHES
EN 1057:2006+A1:2010 Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
EN 1643:2014 Safety and control devices for gas burners and gas burning appliances - Valve proving systems for automatic shut-off valves
NFPA 79 : 2015 ELECTRICAL STANDARD FOR INDUSTRIAL MACHINERY
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
ISO 23551-4:2005 Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 4: Valve-proving systems for automatic shut-off valves
ISO 7005-3:1988 Metallic flanges Part 3: Copper alloy and composite flanges
EN 751-2:1996 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds
ASME B31.3:2016 PROCESS PIPING
EN 14597:2012 Temperature control devices and temperature limiters for heat generating systems
ISO 23551-3:2005 Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 3: Gas/air ratio controls, pneumatic type
ISO 14118:2000 Safety of machinery Prevention of unexpected start-up
IEC 60730-2-6:2015 Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
ASME B16.20 : 2012 METALLIC GASKETS FOR PIPE FLANGES
ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
EN 1797:2001 Cryogenic vessels - Gas/material compatibility
ISO 23553-1:2014 Safety and control devices for oil burners and oil-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves
ISO 5817:2014 Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections
ISO 8434-2:2007 Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors
EN 1854:2010 Pressure sensing devices for gas burners and gas burning appliances
EN 12300 : 1998 AMD 1 2006 CRYOGENIC VESSELS - CLEANLINESS FOR CRYOGENIC SERVICE
ASME B1.20.1 : 2013(R2018) PIPE THREADS, GENERAL PURPOSE (INCH)
ISO 7-1:1994 Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation
NFPA 55 : 2016 COMPRESSED GASES AND CRYOGENIC FLUIDS CODE
EN 125:2010+A1:2015 Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices
NFPA 86 : 2015 OVENS AND FURNACES
ISO 23552-1:2007 Safety and control devices for gas and/or oil burners and gas and/or oil appliances — Particular requirements — Part 1: Fuel/air ratio controls, electronic type
ISO 8434-3:2005 Metallic tube connections for fluid power and general use — Part 3: O-ring face seal connectors
ISO 19879:2010 Metallic tube connections for fluid power and general use Test methods for hydraulic fluid power connections
ISO 23551-1:2012 Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves
ISO 23551-2:2006 Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 2: Pressure regulators
NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
EN 334:2005+A1:2009 Gas pressure regulators for inlet pressures up to 100 bar
EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
EN 10241:2000 Steel threaded pipe fittings
ISO 22968:2010 Forced draught oil burners
IEC 60730-2-5:2013+AMD1:2017 CSV Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems
EN 751-1:1996 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds
ASME B16.21 : 2016 NONMETALLIC FLAT GASKETS FOR PIPE FLANGES
ISO 13577-1:2016 Industrial furnaces and associated processing equipment Safety Part 1: General requirements
EN 14382:2005+A1:2009/AC:2009 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
EN 298:2012 Automatic burner control systems for burners and appliances burning gaseous or liquid fuels
ISO 7005-1:2011 Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems
NFPA 54 : 2018 NATIONAL FUEL GAS CODE
EN 730-1:2002 Gas welding equipment - Safety devices - Part 1: Incorporating a flame (flashback) arrestor
IEC 62061:2005+AMD1:2012+AMD2:2015 CSV Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
EN 1547:2001+A1:2009 Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment
CGA G 4.4 : 2012 OXYGEN PIPELINE AND PIPING SYSTEMS
EN 331:2015 Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
EN 10208-1:2009 Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 1: Pipes of requirement class A
CGA G 4.1 : 2009 CLEANING EQUIPMENT FOR OXYGEN SERVICE
EN 10220:2002 Seamless and welded steel tubes - Dimensions and masses per unit length
EN 10242:1994/A2:2003 THREADED PIPE FITTING IN MALLEABLE CAST IRON
ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
ISO 23550:2011 Safety and control devices for gas burners and gas-burning appliances General requirements
EN 10217-1:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
ISO 13577-4:2014 Industrial furnace and associated processing equipment — Safety — Part 4: Protective systems
EN 882:2016 Chemicals used for treatment of water intended for human consumption - Sodium aluminate
EN 10255:2004+A1:2007 Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions
ISO 22967:2010 Forced draught gas burners
EN 525:2009 Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW

View more information
£298.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.