BS ISO 15686-2:2012
Current
The latest, up-to-date edition.
Buildings and constructed assets. Service life planning Service life prediction procedures
Hardcopy , PDF
English
31-08-2012
Contents
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
3.1 Service life and performance
3.2 Service life forecasting
3.3 Environment and environmental
characterization
3.4 Acts and actors
4 Abbreviated terms
5 Methodology
5.1 Brief description of SLP
5.2 Connection to ISO 15686-1
6 Methodological framework
6.1 Range of SLP and problem definition
6.2 Preparation
6.3 Pretesting
6.4 Ageing exposure programmes
6.5 Analysis and interpretation
7 Critical review
7.1 General description of critical
review
7.2 Need and requirements for critical
review
7.3 Process of critical review
8 Reporting
Annex A (informative) Guidance on process
of SLP
Bibliography
This standard defines the procedures that facilitate service life predictions of building components. It provides a general framework, principles and requirements for conducting and reporting such studies.
This part of ISO15686 describes procedures that facilitate service life predictions of building components, based on technical and functional performance. It provides a general framework, principles and requirements for conducting and reporting such studies.
It does not cover limitation of service life due to obsolescence or other non-measurable or unpredictable performance states.
Committee |
CB/101
|
DevelopmentNote |
Together with BS ISO 15686-1 and BS ISO 15686-3, it supersedes BS 7543(1992). Supersedes 99/102989 DC (09/2002) Supersedes 10/30205800 DC. (09/2012)
|
DocumentType |
Standard
|
Pages |
36
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
Standards | Relationship |
ISO 15686-2:2012 | Identical |
BS 8536-1:2015 | Briefing for design and construction Code of practice for facilities management (Buildings infrastructure) |
BS 8536-2:2016 | Briefing for design and construction Code of practice for asset management (Linear and geographical infrastructure) |
BS 7543:2003 | Guide to durability of buildings and building elements, products and components |
15/30315620 DC : 0 | BS 8536 - FACILITY MANAGEMENT BRIEFING - CODE OF PRACTICE |
BS 7543:2015 | Guide to durability of buildings and building elements, products and components |
16/30333120 DC : 0 | BS 8536-2 - BRIEFING FOR DESIGN AND CONSTRUCTION - PART 2: CODE OF PRACTICE FOR ASSET MANAGEMENT (LINEAR AND GEOGRAPHICAL INFRASTRUCTURE) |
BS 7000-5:2001 | Design management systems Design management systems. Guide to managing obsolescence |
12/30231186 DC : DRAFT AUG 2012 | BS 8210 - GUIDE TO FACILITIES MAINTENANCE MANAGEMENT |
BS 8210:2012 | Guide to facilities maintenance management |
ISO 15686-8:2008 | Buildings and constructed assets — Service-life planning — Part 8: Reference service life and service-life estimation |
ISO 9223:2012 | Corrosion of metals and alloys — Corrosivity of atmospheres — Classification, determination and estimation |
ISO 4892-1:2016 | Plastics Methods of exposure to laboratory light sources Part 1: General guidance |
ISO 6707-1:2017 | Buildings and civil engineering works Vocabulary Part 1: General terms |
ISO 2809:1976 | Paints and varnishes — Determination of light fastness of paints for interior use |
ISO 9226:2012 | Corrosion of metals and alloys — Corrosivity of atmospheres — Determination of corrosion rate of standard specimens for the evaluation of corrosivity |
ISO 9224:2012 | Corrosion of metals and alloys — Corrosivity of atmospheres — Guiding values for the corrosivity categories |
ISO 4665-3:1987 | Rubber, vulcanized Resistance to weathering Part 3: Methods of exposure to artificial light |
ISO 11507:2007 | Paints and varnishes Exposure of coatings to artificial weathering Exposure to fluorescent UV lamps and water |
ISO 3668:2017 | Paints and varnishes — Visual comparison of colour of paints |
ISO 9225:2012 | Corrosion of metals and alloys — Corrosivity of atmospheres — Measurement of environmental parameters affecting corrosivity of atmospheres |
ISO 4665-2:1985 | Rubber, vulcanized Resistance to weathering Part 2: Methods of exposure to natural weathering |
ISO 15686-7:2017 | Buildings and constructed assets — Service life planning — Part 7: Performance evaluation for feedback of service life data from practice |
ISO/TR 11728:1993 | Anodized aluminium and aluminium alloys Accelerated test of weather fastness of coloured anodic oxide coatings using cyclic artificial light and pollution gas |
ISO 2810:2004 | Paints and varnishes Natural weathering of coatings Exposure and assessment |
ISO 13638:1996 | Building construction Sealants Determination of resistance to prolonged exposure to water |
ISO 14615:1997 | Adhesives — Durability of structural adhesive joints — Exposure to humidity and temperature under load |
ISO 30013:2011 | Rubber and plastics hoses Methods of exposure to laboratory light sources Determination of changes in colour, appearance and other physical properties |
ISO 4611:2010 | Plastics Determination of the effects of exposure to damp heat, water spray and salt mist |
ISO 4892-3:2016 | Plastics Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps |
ISO 11431:2002 | Building construction — Jointing products — Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass |
ISO 11341:2004 | Paints and varnishes Artificial weathering and exposure to artificial radiation Exposure to filtered xenon-arc radiation |
ISO 6241:1984 | Performance standards in building Principles for their preparation and factors to be considered |
ISO 4665-1:1985 | Rubber, vulcanized Resistance to weathering Part 1: Assessment of changes in properties after exposure to natural weathering or artificial light |
ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
ISO 4582:2017 | Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources |
ISO 4892-4:2013 | Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps |
ISO 15686-1:2011 | Buildings and constructed assets — Service life planning — Part 1: General principles and framework |
ISO 877:1994 | Plastics Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors |
ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
ISO 9370:2017 | Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method |
ISO 8565:2011 | Metals and alloys Atmospheric corrosion testing General requirements |
ISO 4607:1978 | Plastics Methods of exposure to natural weathering |
ISO 2135:2017 | Anodizing of aluminium and its alloys — Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.