• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

BS ISO 18797-1 : 2016 COR 2017

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMSPOLYCHLOROPRENE OR EPDM
Superseded date

31-12-2017

Published date

19-09-2016

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviated terms
5 Pre-work requirements
6 Materials
7 Bare pipes transportation, handling and storage
8 Surface preparation
9 Coating application for risers
10 Inspection and testing
11 Coating damage/defect repair
12 Handling and stacking of coated pipes
13 Quality requirements
14 Documentation
Annex A (informative) - Contents in a batch certificate
Annex B (normative) - Physical properties of polychloroprene
        or EPDM elastomer
Annex C (normative) - Riser pipe external coating progress chart
Bibliography

Defines the minimum requirements for materials selection, surface preparation, application, inspection, testing, qualification and acceptance criteria of external coating for steel risers pipes used in the splash zone, their field joints and clamps/guides, using an elastomeric protective coating based on polychloroprene, EPDM or equivalent.

Committee
PSE/17
DevelopmentNote
Supersedes 15/30278562 DC. (09/2016) Renumbered and superseded by BS EN ISO 18797-1. (12/2017)
DocumentType
Standard
PublisherName
British Standards Institution
Status
Superseded

ASTM D 5162 : 2015 : REDLINE Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates
ISO 8502-3:2017 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
ISO 2812-2:2007 Paints and varnishes Determination of resistance to liquids Part 2: Water immersion method
ISO 8502-4:2017 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 4: Guidance on the estimation of the probability of condensation prior to paint application
ISO 7619-1:2010 Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness)
ISO 8501-1:2007 Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
ISO/TS 29001:2010 Petroleum, petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and service supply organizations
ISO 815-2:2014 Rubber, vulcanized or thermoplastic Determination of compression set Part 2: At low temperatures
ISO 813:2016 Rubber, vulcanized or thermoplastic Determination of adhesion to a rigid substrate 90 degree peel method
NACE SP 01 88 : 2006 DISCONTINUITY (HOLIDAY) TESTING OF NEW PROTECTIVE COATINGS ON CONDUCTIVE SUBSTRATES
ASTM D 429 : 2014 : REDLINE Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates
ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel — Comparator procedure
ASTM D 1141 : 1998 : EDT 1 Standard Practice for the Preparation of Substitute Ocean Water
ISO 815-1:2014 Rubber, vulcanized or thermoplastic Determination of compression set Part 1: At ambient or elevated temperatures
ISO 4649:2017 Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device
ASTM D 4417 : 2014 : REDLINE Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel
SSPC-SP 10 : 2015 NEAR-WHITE BLAST CLEANING
ASTM D 2084 : 2017 : REDLINE TEST METHOD FOR RUBBER PROPERTY - VULCANIZATION USING OSCILLATING DISK CURE METER
BS 903-5:2004 Physical testing of rubber Guide to the application of rubber testing to finite element analysis
ASTM D 413 : 1998 Standard Test Methods for Rubber Property-Adhesion to Flexible Substrate
ASTM D 4285 : 1983 : R2018 Standard Test Method for Indicating Oil or Water in Compressed Air
ISO 6502:2016 Rubber Guide to the use of curemeters
ISO 8502-5:1998 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method)
ISO 1431-1:2012 Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 1: Static and dynamic strain testing
ISO 9004:2009 Managing for the sustained success of an organization A quality management approach
EN 12664:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance
ISO 29601:2011 Paints and varnishes Corrosion protection by protective paint systems Assessment of porosity in a dry film
ISO 10474:2013 Steel and steel products — Inspection documents
ASTM D 5894 : 2016 : REDLINE Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
ASTM E 337 : 2015 : REDLINE Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
EN 14879-4:2007 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components
ISO 21809-3:2016 Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings
EN 10204:2004 Metallic products - Types of inspection documents
SSPC-SP 6 : 2015 COMMERCIAL BLAST CLEANING
ASTM G 42 : 2011 : REDLINE TEST METHOD FOR CATHODIC DISBONDING OF PIPELINE COATINGS SUBJECTED TO ELEVATED TEMPERATURES
ISO 9001:2015 Quality management systems — Requirements
ISO 2178:2016 Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method
SSPC-AB 2 : 2015 CLEANLINESS OF RECYCLED FERROUS METALLIC ABRASIVES
ISO 9000:2015 Quality management systems — Fundamentals and vocabulary
ASTM D 257 : 2014 : REDLINE Standard Test Methods for DC Resistance or Conductance of Insulating Materials
ISO 8502-6:2006 Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 6: Extraction of soluble contaminants for analysis The Bresle method
ISO 8502-2:2017 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 2: Laboratory determination of chloride on cleaned surfaces
ISO 37:2017 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
ISO 21457:2010 Petroleum, petrochemical and natural gas industries — Materials selection and corrosion control for oil and gas production systems
ISO 8502-9:1998 Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 9: Field method for the conductometric determination of water-soluble salts
ISO 8504-2:2000 Preparation of steel substrates before application of paints and related products Surface preparation methods Part 2: Abrasive blast-cleaning
ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Stylus instrument procedure
ISO 48:2010 Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD)
NACE RP 02 87 : 2002 FIELD MEASUREMENT OF SURFACE PROFILE OF ABRASIVE BLAST-CLEANED STEEL SURFACES USING A REPLICA TAPE
ISO 1629:2013 Rubber and latices — Nomenclature
ISO 8503-5:2017 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 5: Replica tape method for the determination of the surface profile
ISO 814:2017 Rubber, vulcanized or thermoplastic Determination of adhesion to metal Two-plate method
ISO 1817:2015 Rubber, vulcanized or thermoplastic Determination of the effect of liquids
ISO 2781:2008 Rubber, vulcanized or thermoplastic Determination of density

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.