|
ISO 5660-1:2015
|
Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
|
|
ISO 1268-1:2001
|
Fibre-reinforced plastics Methods of producing test plates Part 1: General conditions
|
|
ISO 5658-2:2006
|
Reaction to fire tests Spread of flame Part 2: Lateral spread on building and transport products in vertical configuration
|
|
ISO 13784-2:2002
|
Reaction-to-fire tests for sandwich panel building systems Part 2: Test method for large rooms
|
|
ISO 10093:1998
|
Plastics Fire tests Standard ignition sources
|
|
ISO 9705:1993
|
Fire tests Full-scale room test for surface products
|
|
ISO 1716:2010
|
Reaction to fire tests for products Determination of the gross heat of combustion (calorific value)
|
|
ISO 16312-1:2016
|
Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment Part 1: Criteria
|
|
ISO 5659-2:2017
|
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
|
|
ISO 5660-2:2002
|
Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 2: Smoke production rate (dynamic measurement)
|
|
ISO 1268-4:2005
|
Fibre-reinforced plastics Methods of producing test plates Part 4: Moulding of prepregs
|
|
ISO 11925-2:2010
|
Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test
|
|
ISO 1268-7:2001
|
Fibre-reinforced plastics Methods of producing test plates Part 7: Resin transfer moulding
|
|
ISO 13943:2017
|
Fire safety — Vocabulary
|
|
ISO 24473:2008
|
Fire tests — Open calorimetry — Measurement of the rate of production of heat and combustion products for fires of up to 40 MW
|
|
EN 13238:2010
|
Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates
|
|
ISO 13785-2:2002
|
Reaction-to-fire tests for façades — Part 2: Large-scale test
|
|
ISO 1182:2010
|
Reaction to fire tests for products Non-combustibility test
|
|
EN 13823:2010+A1:2014
|
REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM
|
|
ISO/TS 5658-1:2006
|
Reaction to fire tests — Spread of flame — Part 1: Guidance on flame spread
|
|
ISO 1268-6:2002
|
Fibre-reinforced plastics — Methods of producing test plates — Part 6: Pultrusion moulding
|
|
ISO 1268-10:2005
|
Fibre-reinforced plastics — Methods of producing test plates — Part 10: Injection moulding of BMC and other long-fibre moulding compounds — General principles and moulding of multipurpose test specimens
|
|
ISO/TR 9705-2:2001
|
Reaction-to-fire tests Full-scale room tests for surface products Part 2: Technical background and guidance
|
|
ISO 1268-8:2004
|
Fibre-reinforced plastics — Methods of producing test plates — Part 8: Compression moulding of SMC and BMC
|
|
ISO 472:2013
|
Plastics Vocabulary
|
|
ISO 10840:2008
|
Plastics Guidance for the use of standard fire tests
|
|
ISO 1268-2:2001
|
Fibre-reinforced plastics Methods of producing test plates Part 2: Contact and spray-up moulding
|
|
ISO 15791-1:2014
|
Plastics Development and use of intermediate-scale fire tests for plastics products Part 1: General guidance
|
|
ISO/TR 5660-3:2003
|
Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 3: Guidance on measurement
|
|
ISO 14696:2009
|
Reaction-to-fire tests Determination of fire and thermal parameters of materials, products and assemblies using an intermediate-scale calorimeter (ICAL)
|
|
ISO 13571:2012
|
Life-threatening components of fire Guidelines for the estimation of time to compromised tenability in fires
|
|
ISO 19706:2011
|
Guidelines for assessing the fire threat to people
|
|
ISO/TR 16312-2:2007
|
Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment Part 2: Evaluation of individual physical fire models
|
|
CEN/TS 15447:2006
|
Mounting and fixing in reaction to fire tests under the Construction Products Directive
|
|
ISO 13784-1:2014
|
Reaction to fire test for sandwich panel building systems — Part 1: Small room test
|
|
ISO 9239-1:2010
|
Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source
|
|
ISO 1268-5:2001
|
Fibre-reinforced plastics Methods of producing test plates Part 5: Filament winding
|
|
ISO 21367:2007
|
Plastics — Reaction to fire — Test method for flame spread and combustion product release from vertically oriented specimens
|
|
ISO 1268-11:2005
|
Fibre-reinforced plastics — Methods of producing test plates — Part 11: Injection moulding of BMC and other long-fibre moulding compounds — Small plates
|
|
ISO 13927:2015
|
Plastics — Simple heat release test using a conical radiant heater and a thermopile detector
|
|
ISO 14697:2007
|
Reaction-to-fire tests — Guidance on the choice of substrates for building and transport products
|
|
ISO 1268-9:2003
|
Fibre-reinforced plastics — Methods of producing test plates — Part 9: Moulding of GMT/STC
|
|
ISO 1268-3:2000
|
Fibre-reinforced plastics Methods of producing test plates Part 3: Wet compression moulding
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.