• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

PD IEC/TS 62647-1:2012

Current
Current

The latest, up-to-date edition.

Process management for avionics. Aerospace and defence electronic systems containing lead-free solder Preparation for a lead-free control plan
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

30-11-2012

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Objectives
6 Technical requirements
7 Plan administrative requirements
Annex A (informative) - Template for tailoring
        requirements of IEC/TS 62647-1
Annex B (informative) - Requirements matrix
        for IEC/TS 62647-1
Annex C (informative) - Guidance on configuration
        control and product identification
Bibliography

Specifies the objectives of, and requirements for, documenting processes that assure customers and regulatory agencies that ADHP electronic systems containing Pb-free solder, piece parts, and PWBs will satisfy the applicable requirements for performance, reliability, airworthiness, safety, and certifiability throughout the specified life of performance.

This part of the IEC/TS 62647 series defines the objectives of, and requirements for, documenting processes that assure customers and regulatory agencies that A DHP electronic systems containing Pb-free solder, piece parts, and PWBs will satisfy the applicable requirements for performance, reliability, airworthiness, safety, and certifiability throughout the specified life of performance.

This specification aims to communicate requirements for a lead-free control plan (LFCP), hereinafter referred to as the Plan, and to assist the Plan owners in the development of their own Plans. The Plan documents the Plan owner’s processes to assure their customers and all other stakeholders that the Plan owner’s products will continue to meet their requirements, given the risks stated in the Introduction.

This specification does not contain detailed descriptions of the processes to be documented but lists high-level requirements for such processes, and areas of concern to the A DHP industries that need to be addressed by the processes.

Pb-free risk management should be accomplished through specific requirements added to the Plan owner’s existing infrastructure of product management and control.

This specification applies to the ADHP electronics system supply chain.

The control of the Pb-free activities will b e accomplished by the Plan owner addressing the requirements of their Customer. Th ese activities include, but are not limited to, those performed by the s ystem i ntegrator, the original equipment manufacturer (OEM), and their respective supply chains, to the lowest level possible. This should be done with the knowledge that, at the component level, the aerospace industry may not have a great influence over those suppliers. In such cases, the Plan owner assumes responsibility.

Some applications may have unique requirements that exceed the scope of this specification . The extended scope should be covered separately.

The requirements of this specification may be tailored to address unique/specific program needs. If tailoring is performed, the user will obtain documented customer concurrence. Annex A provides a tailoring template that may be used.

This document may be used by other high-performance and high-reliability industries, at their discretion.

Committee
GEL/107
DevelopmentNote
Supersedes BS PD IEC PAS 62647-1. (11/2012)
DocumentType
Standard
Pages
36
PublisherName
British Standards Institution
Status
Current
Supersedes

Standards Relationship
IEC TS 62647-1:2012 Identical

DEFSTAN 08-107/3(2013) : 2013 GENERAL REQUIREMENTS FOR THE DESIGN OF ELECTROTECHNICAL AND NAVAL WEAPON EQUIPMENT

IPC J STD 609 : A MARKING AND LABELING OF COMPONENTS, PCBS AND PCBAS TO IDENTIFY LEAD (PB), LEAD-FREE (PB-FREE) AND OTHER ATTRIBUTES
IEC PAS 62647-2:2011 Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 2: Mitigation of the deleterious effects of tin
GEIA HB 0005-2 : 2007 TECHNICAL GUIDELINES FOR AEROSPACE AND HIGH PERFORMANCE ELECTRONIC SYSTEMS CONTAINING LEAD-FREE SOLDER AND FINISHES
IPC WP 006 : 2003 ROUND ROBIN TESTING AND ANALYSIS - LEAD-FREE ALLOYS - TIN, SILVER AND COPPER
GEIA STD 0005-3 : 2013 PERFORMANCE TESTING FOR AEROSPACE AND HIGH PERFORMANCE ELECTRONIC INTERCONNECTS CONTAINING PB-FREE SOLDER AND FINISHES
IEC PAS 62647-3:2011 Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 3: Performance testing for systems containing lead-free solder and finishes
GEIA HB 649 : 2005 CONFIGURATION MANAGEMENT STANDARD IMPLEMENTATION GUIDE
IPC J STD 001 : F REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES
IPC 2225 : 0 SECTIONAL DESIGN STANDARD FOR ORGANIC MULTICHIP MODULES (MCM-L) AND MCM-L ASSEMBLIES
IPC J STD 006 : C REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDERS FOR ELECTRONIC SOLDERING APPLICATIONS
IPC J STD 033C-1:2014 HANDLING, PACKING, SHIPPING AND USE OF MOISTURE, REFLOW, AND PROCESS SENSITIVE DEVICES
IEC PAS 62647-22:2011 Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 22: Technical guidelines
GEIA HB 0005-3 : 2008 REWORK/REPAIR HANDBOOK TO ADDRESS THE IMPLICATIONS OF LEAD-FREE ELECTRONICS AND MIXED ASSEMBLIES IN AEROSPACE AND HIGH PERFORMANCE ELECTRONIC SYSTEMS
IPC A 610 : F ACCEPTABILITY OF ELECTRONIC ASSEMBLIES
GEIA STD 0005-2 : 2012 MITIGATING THE EFFECTS OF TIN WHISKERS IN AEROSPACE AND HIGH PERFORMANCE ELECTRONIC SYSTEMS
IEC PAS 62647-23:2011 Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 23: Rework and repair guidance to address the implications of lead-free electronics and mixed assemblies
IPC J STD 005 : A REQUIREMENTS FOR SOLDERING PASTES
IPC J STD 002 : D SOLDERABILITY TESTS FOR COMPONENT LEADS, TERMINATIONS, LUGS, TERMINALS AND WIRES
GEIA HB 0005-1 : 2006 PROGRAM MANAGEMENT/SYSTEMS ENGINEERING GUIDELINES FOR MANAGING THE TRANSITION TO LEAD-FREE ELECTRONICS
IPC 2221B:2012 GENERIC STANDARD ON PRINTED BOARD DESIGN
IEC 61191-1:2013 Printed board assemblies - Part 1: Generic specification - Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies
IEC 61188-5-1:2002 Printed boards and printed board assemblies - Design and use - Part 5-1: Attachment (land/joint) considerations - Generic requirements
IPC 1065 : 0 MATERIAL DECLARATION HANDBOOK
GEIA STD 0005-1 : 2012 PERFORMANCE STANDARD FOR AEROSPACE AND HIGH PERFORMANCE ELECTRONIC SYSTEMS CONTAINING LEAD-FREE SOLDER
IPC 2222 : A SECTIONAL DESIGN STANDARD FOR RIGID ORGANIC PRINTED BOARDS
IPC 9701 : A PERFORMANCE TEST METHODS AND QUALIFICATION REQUIREMENTS FOR SURFACE MOUNT SOLDER ATTACHMENTS
IPC J STD 028 : 0 PERFORMANCE STANDARD FOR CONSTRUCTION OF FLIP CHIP AND CHIP SCALE BUMPS
IEC PAS 62647-21:2011 Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 21: Program management - Systems engineering guidelines for managing the transition to lead-free electronics
IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
IPC J STD 003 : C SOLDERABILITY TESTS FOR PRINTED BOARDS
IPC 6013 : C QUALIFICATION AND PERFORMANCE SPECIFICATION FOR FLEXIBLE/RIGID-FLEXIBLE PRINTED BOARDS
IPC 6015 : 0 QUALIFICATION AND PERFORMANCE SPECIFICATION FOR ORGANIC MULTICHIP MODULE MOUNTING AND INTERCONNECTING STRUCTURES
ASME Y14.100 : 2017 ENGINEERING DRAWING PRACTICES - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES
IPC 2223 : C SECTIONAL DESIGN STANDARD FOR FLEXIBLE/RIGID-FLEXIBLE PRINTED BOARDS
IEC TS 62647-2:2012 Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 2: Mitigation of deleterious effects of tin
IPC 6012 : C QUALIFICATION AND PERFORMANCE SPECIFICATION FOR RIGID PRINTED BOARDS

View more information
£244.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.