ISO 15171-2:2016
|
Connections for fluid power and general use Hydraulic couplings for diagnostic purposes Part 2: Coupling with M16 x 2 end for connection under pressure
|
ISO 11926-2:1995
|
Connections for general use and fluid power Ports and stud ends with ISO 725 threads and O-ring sealing Part 2: Heavy-duty (S series) stud ends
|
ISO 10683:2014
|
Fasteners Non-electrolytically applied zinc flake coatings
|
ISO 16028:1999
|
Hydraulic fluid power — Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) — Specifications
|
ISO 8434-1:2007
|
Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectors
|
ISO 12151-2:2003
|
Connections for hydraulic fluid power and general use — Hose fittings — Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector ends with O-rings
|
ISO 9974-3:1996
|
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 3: Stud ends with metal-to-metal sealing (type B)
|
ISO 6150:1988
|
Pneumatic fluid power Cylindrical quick-action couplings for maximum working pressures of 10 bar, 16 bar and 25 bar (1 MPa, 1,6 Mpa, and 2,5 MPa) Plug connecting dimensions, specifications, application guidelines and testing
|
ISO 6149-4:2017
|
Connections for fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
|
ISO 15171-1:1999
|
Connections for fluid power and general use Hydraulic couplings for diagnostic purposes Part 1: Coupling not for connection under pressure
|
ISO 9974-2:1996
|
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 2: Stud ends with elastomeric sealing (type E)
|
ISO 6162-2:2012
|
Hydraulic fluid power Flange connections with split or one-piece flange clamps and metric or inch screws Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
|
ISO 9974-4:2016
|
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
|
ISO 12151-5:2007
|
Connections for hydraulic fluid power and general use — Hose fittings — Part 5: Hose fittings with ISO 8434-2 37 degree flared ends
|
ISO 8434-2:2007
|
Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors
|
ISO 1179-4:2007
|
Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 4: Stud ends for general use only with metal-to-metal sealing (type B)
|
ISO 6149-3:2006
|
Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends
|
ISO 12151-3:2010
|
Connections for hydraulic fluid power and general use Hose fittings Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends
|
ISO 8434-3:2005
|
Metallic tube connections for fluid power and general use — Part 3: O-ring face seal connectors
|
ISO 6162-1:2012
|
Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
|
ISO 6149-2:2006
|
Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends
|
ISO 8434-6:2009
|
Metallic tube connections for fluid power and general use — Part 6: 60 degree cone connectors with or without O-ring
|
ISO 14743:2004
|
Pneumatic fluid power Push-in connectors for thermoplastic tubes
|
ISO 7241:2014
|
Hydraulic fluid power — Dimensions and requirements of quick-action couplings
|
ISO 12151-1:2010
|
Connections for hydraulic fluid power and general use — Hose fittings — Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends
|
ISO 11926-3:1995
|
Connections for general use and fluid power Ports and stud ends with ISO 725 threads and O-ring sealing Part 3: Light-duty (L series) stud ends
|
ISO 14541:2013
|
Hydraulic fluid power — Dimensions and requirements for screw-to-connect quick-action couplings for general purpose
|
ISO 12151-6:2009
|
Connections for hydraulic fluid power and general use Hose fittings Part 6: Hose fittings with ISO 8434-6 60 degree cone ends
|
ISO 12151-4:2007
|
Connections for hydraulic fluid power and general use Hose fittings Part 4: Hose fittings with ISO 6149 metric stud ends
|
ISO 1179-2:2013
|
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
|
ISO 14540:2013
|
Hydraulic fluid power — Dimensions and requirements for screw-to-connect quick-action couplings for use at a pressure of 72 MPa (720 bar)
|
ISO 1179-3:2007
|
Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H)
|