We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
  • BS PD6686(2006) : 2006

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    Add to Watchlist
    This Standard has been added successfully to your Watchlist.
    Please visit My Watchlist to see all standards that you are watching.
    Please log in or to add this standard to your Watchlist.
    We could not add this standard to your Watchlist.
    Please retry or contact support for assistance.
    You need to be logged in to add this standard to your Watchlist.
    Please log in now or create an account to add.
    You already added this Product in the Watchlist.

    GUIDANCE ON DIRECTIVES, REGULATIONS AND STANDARDS RELATED TO PREVENTION OF FIRE AND EXPLOSION IN THE PROCESS INDUSTRIES

    Available format(s):  Hardcopy, PDF

    Superseded date:  31-12-2012

    Language(s):  English

    Published date:  01-01-2006

    Publisher:  British Standards Institution

    Add to Watchlist

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    1 Scope
    2 Terms and definitions
    3 Fire and explosion safety
    4 General risk assessment
    Annexes
    Annex A European directives and United Kingdom
            regulations
    Annex B Identification of dangerous substances
    Annex C Hazardous areas: Zoning procedures
    Annex D Preventing, detecting and minimizing potentially
            explosive atmospheres in the workplace
    Annex E Avoidance and prevention of explosive
            atmospheres inside process plant
    Annex F Ignition sources
    Annex G Selection of equipment for use in hazardous areas
    Annex H Explosion protection
    Annex I Standards for the avoidance of fires and explosion
            hazards for machinery and equipment
    Annex J Fire effluents
    Annex K Emergency lighting and luminaires
    Annex L Standards for safety signing
    Annex M Standards for personal protective equipment
    Annex N Reaction to fire and resistance to fire
            tests of building materials and structures
    Annex O Standards for fire resistance of construction
            materials and building elements
    Annex P Standards on fire safety design
    Annex Q Standards on fire safety engineering
    Annex R Standards on fire detection and warning
    Annex S Standards for doors and barriers
    Annex T Standards for smoke and heat exhaust ventilators
    Annex U Fire extinguishing installations and equipment on
            premises
    Bibliography
    Figures
    Tables

    Abstract - (Show below) - (Hide below)

    Gives a comprehensive guide to the standards, draft standards and other documents that contain the technical, practical and organizational information to ensure compliance with EU Directives and UK regulations.

    General Product Information - (Show below) - (Hide below)

    Committee FSH/23
    Document Type Standard
    Publisher British Standards Institution
    Status Superseded
    Superseded By

    Standards Referencing This Book - (Show below) - (Hide below)

    BS 476-23(1987) : 1987 FIRE TESTS ON BUILDING MATERIALS AND STRUCTURES - METHODS FOR DETERMINATION OF THE CONTRIBUTION OF COMPONENTS TO THE FIRE RESISTANCE OF A STRUCTURE
    BS 476-4(1970) : 1970 FIRE TESTS ON BUILDING MATERIALS AND STRUCTURES - PART 4: NON-COMBUSTIBILITY TEST FOR MATERIALS
    BS 7899-1(1997) : 1997 CODE OF PRACTICE FOR ASSESSMENT OF HAZARD TO LIFE AND HEALTH FROM FIRE - PART 1: GENERAL GUIDANCE
    BS EN 60519-6:2011 Safety in electroheat installations Specifications for safety in industrial microwave heating equipment
    BS 8202-2(1992) : 1992 COATINGS FOR FIRE PROTECTION OF BUILDING ELEMENTS - CODE OF PRACTICE FOR THE USE OF INTUMESCENT COATING SYSTEMS TO METALLIC SUBSTRATES FOR PROVIDING FIRE RESISTANCE
    BS EN 1158:1997 Building hardware. Door coordinator devices. Requirements and test methods
    BS EN 61508-7:2010 Functional safety of electrical/electronic/ programmable electronic safety related systems Overview of techniques and measures
    BS EN 61508-5:2010 Functional safety of electrical/electronic/ programmable electronic safety related systems Examples of methods for the determination of safety integrity levels
    BS EN 13468:2001 Thermal insulating products for building equipment and industrial installations. Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions and pH
    BS ISO 5725-5 : 1998 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 5: ALTERNATIVE METHODS FOR THE DETERMINATION OF THE PRECISION OF A STANDARD MEASUREMENT METHOD
    BS 2782-1.140E(1982) : 1982 METHODS OF TESTING PLASTICS - THERMAL PROPERTIES - FLAMMABILITY OF A SMALL, INCLINED TEST PIECE EXPOSED TO AN ALCOHOL FLAME (LABORATORY METHOD)
    DIN 51794:2003-05 TESTING OF MINERAL OIL HYDROCARBONS - DETERMINATION OF IGNITION TEMPERATURE
    BS 6742-3:1990 ELECTROSTATIC PAINTING AND FINISHING EQUIPMENT USING FLAMMABLE MATERIALS - ELECTROSTATIC PAINTING AND FINISHING EQUIPMENT USING FLAMMABLE MATERIALS - SPECIFICATION FOR SELECTION, INSTALLATION AND USE OF HAND-HELD POWDER SPRAY GUNS (ENERGY LIMIT OF 5 MJ) AND THEIR ASSOCIATED APPARATUS
    BS 4841-2(1975) : 1975 RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM FOR BUILDING APPLICATIONS - LAMINATED BOARD FOR USE AS A WALL AND CEILING INSULATION
    BS EN 60695-2-12 : 2010 FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS
    BS 6327(1982) : 1982 SPECIFICATION FOR FIRE PROTECTION OF RECIPROCATING INTERNAL COMBUSTION ENGINES
    BS EN 13274-1:2001 Respiratory protective devices. Methods of test Determination of inward leakage and total inward leakage
    BS PD CLC/TR 50404 : 2003 ELECTROSTATICS - CODE OF PRACTICE FOR THE AVOIDANCE OF HAZARDS DUE TO STATIC ELECTRICITY
    BS 8414-1:2002 FIRE PERFORMANCE OF EXTERNAL CLADDING SYSTEMS - TEST METHODS FOR NON-LOADBEARING EXTERNAL CLADDING SYSTEMS APPLIED TO THE FACE OF A BUILDING
    BS 5378-2(1980) : 1980 SAFETY SIGNS AND COLOURS - SPECIFICATION FOR COLORIMETRIC AND PHOTOMETRIC PROPERTIES OF MATERIALS
    BS EN ISO 3680 : 2004 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-524: DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD
    BS 7629-1:1997 SPECIFICATION FOR 300/500 V FIRE RESISTANT ELECTRIC CABLES HAVING LOW EMISSION OF SMOKE AND CORROSIVE GASES WHEN AFFECTED BY FIRE - PART 1: MULTICORE CABLES
    BS 3958-3:1985 Thermal insulating materials Metal mesh faced man-made mineral fibre mattresses
    BS 7346-2(1990) : 1990 COMPONENTS FOR SMOKE AND HEAT CONTROL SYSTEMS - SPECIFICATION FOR POWERED SMOKE AND HEAT EXHAUST VENTILATORS
    BS EN 60893-3-4 : 2004 INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 3-4: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - REQUIREMENTS FOR RIGID LAMINATED SHEETS BASED ON PHENOLIC RESINS
    BS EN 13171 : 2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD FIBRE (WF) PRODUCTS - SPECIFICATION
    BS EN ISO 5659-1 : 1999 PLASTICS - SMOKE GENERATION - PART 1: GUIDANCE ON OPTICAL-DENSITY TESTING
    ISO 1516:2002 Determination of flash/no flash Closed cup equilibrium method
    BS ISO TR 13387-3 : 1999 FIRE SAFETY ENGINEERING - PART 3: ASSESSMENT AND VERIFICATION OF MATHEMATICAL FIRE MODELS
    BS 7346-3(1990) : 1990 COMPONENTS FOR SMOKE AND HEAT CONTROL SYSTEMS - SPECIFICATION FOR SMOKE CURTAINS
    BS 7346-4(2003) : 2003 COMPONENTS FOR SMOKE AND HEAT CONTROL SYSTEMS - PART 4: FUNCTIONAL RECOMMENDATIONS AND CALCULATION METHODS FOR SMOKE AND HEAT EXHAUST VENTILATION SYSTEMS, EMPLOYING STEADY-STATE DESIGN FIRES - CODE OF PRACTICE
    BS 5906(1980) : 1980 CODE OF PRACTICE FOR STORAGE AND ON-SITE TREATMENT OF SOLID WASTE FROM BUILDINGS
    BS 6262-4(1994) : 1994 GLAZING FOR BUILDINGS - SAFETY RELATED TO HUMAN IMPACT
    PREN 15233 : DRAFT 2005 METHODOLOGY FOR FUNCTIONAL SAFETY ASSESSMENT OF PROTECTIVE SYSTEMS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES
    BS 6664-1(1986) : 1986 FLASHPOINT OF PETROLEUM AND RELATED PRODUCTS - METHOD OF TEST FOR FLASH - NO FLASH (CLOSED CUP EQUILIBRIUM METHOD)
    BS EN 50050 : 2006 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT
    BS ISO/TR 11696-1 : 1999 USES OF REACTION TO FIRE TEST RESULTS - PART 1: APPLICATION OF TEST RESULTS TO PREDICT FIRE PERFORMANCE OF INTERNAL LININGS AND OTHER BUILDING PRODUCTS
    BS EN ISO 20823 : 2003 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE FLAMMABILITY CHARACTERISTICS OF FLUIDS IN CONTACT WITH HOT SURFACES - MANIFOLD IGNITION TEST
    ISO 28:1976 Cinematography Camera usage of 8 mm Type R motion-picture film Specifications
    BS EN ISO 9239-1:2010 (published 2010-08) Reaction to fire tests for floorings Determination of the burning behaviour using a radiant heat source
    BS EN 50268-1 : 2000 COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 1: APPARATUS
    BS 6742-2:1987 ELECTROSTATIC PAINTING AND FINISHING EQUIPMENT USING FLAMMABLE MATERIALS - SPECIFICATION FOR SELECTION, INSTALLATION AND USE OF HAND-HELD PAINT SPRAY GUNS (ENERGY LIMIT OF 0,24 MJ) AND ASSOCIATED APPARATUS
    BS EN 54-7:2001 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 7: SMOKE DETECTORS - POINT DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION
    BS EN 3-1 : 1996 PORTABLE FIRE EXTINGUISHERS - DESCRIPTION, DURATION OF OPERATION, CLASS A AND B FIRE TEST
    BS EN 54-1:2011 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 1: INTRODUCTION
    BS EN 403:2004 Respiratory protective devices for self-rescue. Filtering devices with hood for escape from fire. Requirements, testing, marking
    BS EN 3-5 : 1996 PORTABLE FIRE EXTINGUISHERS - SPECIFICATION AND SUPPLEMENTARY TESTS
    BS 5839-5:1988 FIRE DETECTION AND ALARM SYSTEMS FOR BUILDINGS - SPECIFICATION FOR OPTICAL BEAM SMOKE DETECTORS
    BS 3958-2:1982 Thermal insulating materials Calcium silicate preformed insulation
    BS IEC 61831 : 1999 ON-LINE ANALYSER SYSTEMS - GUIDE TO DESIGN AND INSTALLATION
    BS EN 12882:2015 CONVEYOR BELTS FOR GENERAL PURPOSE USE - ELECTRICAL AND FLAMMABILITY SAFETY REQUIREMENTS
    BS EN 50014 : 1998 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS
    BS EN 3-4 : 1996 PORTABLE FIRE EXTINGUISHERS - CHARGES, MINIMUM REQUIRED FIRE
    BS EN ISO 14122-1:2016 Safety of machinery. Permanent means of access to machinery Choice of fixed means and general requirements of access
    BS EN 13471:2001 Thermal insulating products for building equipment and industrial installations. Determination of the coefficient of thermal expansion
    BS EN 1953:2013 Atomising and spraying equipment for coating materials. Safety requirements
    BS 8290-1(1991) : 1991 SUSPENDED CEILINGS - CODE OF PRACTICE FOR DESIGN
    BS 7036-3(1996) : 1996 CODE OF PRACTICE FOR SAFETY AT POWERED DOORS FOR PEDESTRIAN USE - SWING DOORS AND BALANCED DOORS
    BS 6458-2.3:1985 FIRE HAZARD TESTING FOR ELECTROTECHNICAL PRODUCTS - TEST METHODS - BAD-CONNECTION TEST WITH HEATERS
    BS 5309-3:1976 METHODS FOR SAMPLING CHEMICAL PRODUCTS - SAMPLING OF LIQUIDS
    BS EN 50016 : 2002 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - PRESSURIZED APPARATUS "P"
    BS KIT 140 : 2004 PD 7974 SERIES - FIRE SAFETY ENGINEERING PRINCIPLES FOR THE DESIGN OF BUILDINGS
    BS EN 1486 : 2007 PROTECTIVE CLOTHING FOR FIRE-FIGHTERS - TEST METHODS AND REQUIREMENTS FOR REFLECTIVE CLOTHING FOR SPECIALISED FIRE-FIGHTING
    BS 5234-1(1992) : 1992 PARTITIONS (INCLUDING MATCHING LININGS) - CODE OF PRACTICE FOR DESIGN AND INSTALLATION
    BS ISO 10294-4 : 2001 FIRE RESISTANCE TESTS - FIRE DAMPERS FOR AIR DISTRIBUTION SYSTEMS - PART 4: TEST OF THERMAL RELEASE MECHANISM
    BS 5225-3(1982) : 1982 PHOTOMETRIC DATA FOR LUMINAIRES - PART 3: METHOD OF PHOTOMETRIC MEASUREMENT OF BATTERY-OPERATED EMERGENCY LIGHTING LUMINAIRES
    BS 8214:1990 CODE OF PRACTICE FOR FIRE DOOR ASSEMBLIES WITH NON-METALLIC LEAVES
    BS 6391(1983) : 1983 SPECIFICATION FOR NON-PERCOLATING LAYFLAT DELIVERY HOSES AND HOSE ASSEMBLIES FOR FIRE FIGHTING PURPOSES
    BS EN 954-1 : 1997 SAFETY OF MACHINERY - SAFETY RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
    BS EN ISO 14557 : 2002 FIRE-FIGHTING HOSES - RUBBER AND PLASTICS SUCTION HOSES AND HOSE ASSEMBLIES
    BS EN 50265-1 : 1999 COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - TEST FOR RESISTANCE TO VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED CONDUCTOR OR CABLE
    PREN 1839 : DRAFT 2014 DETERMINATION OF EXPLOSION LIMITS OF GASES AND VAPOURS AND DETERMINATION OF THE LIMITING OXYGEN CONCENTRATION (LOC) FOR FLAMMABLE GASES AND VAPOURS
    BS IEC 62086-2 : 2001 AMD 16068 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL RESISTANCE TRACE HEATING - PART 2: APPLICATION GUIDE FOR DESIGN, INSTALLATION AND MAINTENANCE
    BS 3958-1:1982 Thermal insulating materials Magnesia preformed insulation
    BS EN 1364-2:1999 FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 2: CEILINGS
    BS EN 1846-3 : 2013 FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 3: PERMANENTLY INSTALLED EQUIPMENT - SAFETY AND PERFORMANCE
    BS 6643-2(1985) : 1985 RECHARGING FIRE EXTINGUISHERS (MANUFACTURED TO BS 5423 'SPECIFICATION FOR PORTABLE FIRE EXTINGUISHERS') - SPECIFICATION FOR POWDER REFILL CHARGES
    BS 7655-8.2:1997 SPECIFICATION FOR INSULATING AND SHEATHING MATERIALS FOR CABLES - CROSS-LINKED SHEATHING COMPOUNDS HAVING LOW EMISSION OF CORROSIVE GASES, AND SUITABLE FOR USE IN CABLES HAVING LOW EMISSION OF SMOKE WHEN AFFECTED BY FIRE - ORDINARY DUTY OIL-RESISTING TYPES
    BS EN ISO 340:2013 Conveyor belts. Laboratory scale flammability characteristics. Requirements and test method
    BS EN 1365-1 : 2012 FIRE RESISTANCE TESTS FOR LOADBEARING ELEMENTS - PART 1: WALLS
    BS EN 12259-1:1999 Fixed firefighting systems. Components for sprinkler and water spray systems Sprinklers
    BS ISO 5658-2 : 2006 REACTION TO FIRE TESTS - SPREAD OF FLAME - PART 2: LATERAL SPREAD ON BUILDING AND TRANSPORT PRODUCTS IN VERTICAL CONFIGURATION
    BS EN 13124-2:2004 Windows, doors and shutters. Explosion resistance. Test method Range test
    BS EN 60519-2:2006 Safety in electroheat installations Particular requirements for resistance heating equipment
    BS 5516-2(2004) : 2004 PATENT GLAZING AND SLOPING GLAZING FOR BUILDINGS - PART 2: CODE OF PRACTICE FOR SLOPING GLAZING
    BS EN 1834-1 : 2000 RECIPROCATING INTERNAL COMBUSTION ENGINES - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF ENGINES FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1 - GROUP 2 ENGINES FOR USE IN FLAMMABLE GAS AND VAPOUR ATMOSPHERES
    BS 5499-6:2002 (published 2002-11) Graphical symbols and signs. Safety signs, including fire safety signs Creation and design of graphical symbols for use in safety signs. Requirements
    BS EN 13274-6 : 2002 RESPIRATORY PROTECTIVE DEVICES - METHODS OF TEST - PART 6: DETERMINATION OF CARBON DIOXIDE CONTENT OF THE INHALATION AIR
    89/106/EEC : 1988 COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS
    ISO 5660-2:2002 Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 2: Smoke production rate (dynamic measurement)
    BS 5306-5.2:1984 Code of practice for fire extinguishing installations and equipment on premises. Halon systems Halon 1211 total flooding systems
    BS EN 27201-1 : 1994 FIRE PROTECTION - FIRE EXTINGUISHING MEDIA - HALOGENATED HYDROCARBONS - SPECIFICATIONS FOR HALON 1211 AND HALON 1301
    BS 5598-1(1978) : 1978 METHODS OF SAMPLING AND TEST FOR HALOGENATED HYDROCARBONS - SAMPLING OF LIQUID PRODUCTS
    BS EN 61241-14 : 2004 ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 14: SELECTION AND INSTALLATION
    BS OHSAS 18001(1999) : 1999 AMD 14223 OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - SPECIFICATION
    BS EN 746-2 : 2010 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS
    PREN 13501-4 : DRAFT 2015 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 4: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS ON COMPONENTS OF SMOKE CONTROL SYSTEMS
    PREN 1364-6 : DRAFT 2016 FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 6: CAVITY BARRIERS
    BS EN 50194 : 2000 ELECTRICAL APPARATUS FOR THE DETECTION OF COMBUSTIBLE GASES IN DOMESTIC PREMISES - TEST METHODS AND PERFORMANCE REQUIREMENTS
    BS EN 620 : 2002
    BS 5588-12(2004) : 2004 FIRE PRECAUTIONS IN THE DESIGN, CONSTRUCTION AND USE OF BUILDINGS - PART 12: MANAGING FIRE SAFETY
    BS 7287(1990) : 1990 GUIDE FOR THE USE OF FIRE-RESISTANT HYDRAULIC FLUIDS
    BS EN 533 : 1997 PROTECTIVE CLOTHING - PROTECTION AGAINST HEAT AND FLAME - LIMITED FLAME SPREAD MATERIALS AND MATERIAL ASSEMBLIES
    BS EN 1637 : 1999 LIGHT CONVEYOR BELTS - TEST METHODS FOR THE MEASUREMENT OF THE ELECTRICAL RESISTANCES
    BS IEC 60079-19 : 1993 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - REPAIR AND OVERHAUL FOR APPARATUS USED IN EXPLOSIVE ATMOSPHERES (OTHER THAN MINES OR EXPLOSIVES)
    BS EN 60695-11-2:2017 Fire hazard testing Test flames. 1 kW pre-mixed flame. Apparatus, confirmatory test arrangement and guidance
    BS 6464:1984 SPECIFICATION FOR REINFORCED PLASTICS PIPES, FITTINGS AND JOINTS FOR PROCESS PLANTS
    BS 6913-8(1992) : 1992 OPERATION AND MAINTENANCE OF EARTH-MOVING MACHINERY - SPECIFICATION FOR COMMON SYMBOLS FOR OPERATOR CONTROLS AND OTHER DISPLAYS
    BS EN 983 : 1996 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS
    BS 5266-4(1999) : 1999 EMERGENCY LIGHTING - CODE OF PRACTICE FOR DESIGN, INSTALLATION, MAINTENANCE AND USE OF OPTICAL FIBRE SYSTEMS
    BS 5268-4.1(1978) : 1978 STRUCTURAL USE OF TIMBER - PART 4: FIRE RESISTANCE OF TIMBER STRUCTURES - SECTION 4.1: RECOMMENDATIONS FOR CALCULATING FIRE RESISTANCE OF TIMBER MEMBERS
    BS EN 13165 : 2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE RIGID POLYURETHANE FOAM (PU) PRODUCTS - SPECIFICATION
    BS OHSAS 18002(2000) : 2000 AMD 14224 OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - GUIDELINES FOR THE IMPLEMENTATION OF OHSAS 18001
    BS ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results Basic methods for the determination of repeatability and reproducibility of a standard measurement method
    BS 5306-6.1(1988) : 1988 FIRE EXTINGUISHING INSTALLATIONS AND EQUIPMENT ON PREMISES - PART 6: FOAM SYSTEMS - SECTION 6.1: SPECIFICATION FOR LOW EXPANSION FOAM SYSTEMS
    BS EN 60079-15 : 2010 EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION 'N'
    PREN 1364-5 : DRAFT 2014 FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 5: AIR TRANSFER GRILLES
    BS 5306-7(1988) : 1988 FIRE EXTINGUISHING INSTALLATIONS AND EQUIPMENT ON PREMISES - SPECIFICATION FOR POWDER SYSTEMS
    BS 6401:1983 Method for measurement, in the laboratory, of the specific optical density of smoke generated by materials
    BS EN 60893-3-2 : 2004 INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 3-2: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - REQUIREMENTS FOR RIGID LAMINATED SHEETS BASED ON EPOXY RESINS
    BS ISO TR 5658-1 : 1997 REACTION TO FIRE TESTS - SPREAD OF FLAMES - GUIDANCE ON FLAME SPREAD
    BS EN 13702-2 : 2003 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-514: BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF DYNAMIC VISCOSITY OF MODIFIED BITUMEN - PART 2: COAXIAL CYLINDERS METHOD
    BS EN 50136-2-3 : 1998 ALARM SYSTEMS - ALARM TRANSMISSION SYSTEMS AND EQUIPMENT - REQUIREMENTS FOR EQUIPMENT USED IN SYSTEMS WITH DIGITAL COMMUNICATORS USING THE PUBLIC SWITCHED TELEPHONE NETWORK
    BS ISO 10294-1 : 1996 FIRE RESISTANCE TESTS - FIRE DAMPERS FOR AIR DISTRIBUTION SYSTEMS - PART 1: TEST METHOD
    BS EN 61508-1:2010 Functional safety of electrical/electronic/ programmable electronic safety-related systems General requirements
    BS EN 13123-1:2001 (published 2001-06) Windows, doors and shutters. Explosion resistance. Requirements and classification Shock tube
    BS 8110-2(1985) : 1985 STRUCTURAL USE OF CONCRETE - PART 2: CODE OF PRACTICE FOR SPECIAL CIRCUMSTANCES
    BS 5309-2:1976 METHODS FOR SAMPLING CHEMICAL PRODUCTS - SAMPLING OF GASES
    BS 5266-5(1999) : 1999 EMERGENCY LIGHTING - SPECIFICATION FOR COMPONENT PARTS OF OPTICAL FIBRE SYSTEMS
    BS EN 1147:2001 PORTABLE LADDERS FOR FIRE SERVICE USE
    BS EN 13821 : 2002 POTENTIALLY EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - DETERMINATION OF MINIMUM IGNITION ENERGY OF DUST/AIR MIXTURES
    BS EN 54-4 : 1998 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 4: POWER SUPPLY EQUIPMENT
    BS 6713-2:1986 EXPLOSION PROTECTION SYSTEMS - METHOD FOR DETERMINATION OF EXPLOSION INDICES OF COMBUSTIBLE GASES IN AIR
    BS 5309-1:1976 METHODS FOR SAMPLING CHEMICAL PRODUCTS - INTRODUCTION AND GENERAL PRINCIPLES
    ISO 7149:1982 Continuous handling equipment Safety code Special rules
    BS 5274(1985) : 1985 SPECIFICATION FOR FIRE HOSE REELS (WATER) FOR FIXED INSTALLATIONS
    BS 5268-4.2(1990) : 1990 STRUCTURAL USE OF TIMBER - FIRE RESISTANCE OF TIMBER STRUCTURES - RECOMMENDATION FOR CALCULATING FIRE RESISTANCE OF TIMBER STUD WALLS AND JOISTED FLOOR CONSTRUCTIONS
    BS 6742-4:1990 ELECTROSTATIC PAINTING AND FINISHING EQUIPMENT USING FLAMMABLE MATERIALS - ELECTROSTATIC PAINTING AND FINISHING EQUIPMENT USING FLAMMABLE MATERIALS - SPECIFICATION FOR SELECTION, INSTALLATION AND USE OF HAND-HELD FLOCK SPRAY GUNS (ENERGY LIMIT OF 0,24 MJ OR 5 MJ) AND THEIR ASSOCIATED APPARATUS
    BS EN 54-2 : 1998 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 2: CONTROL AND INDICATING EQUIPMENT
    BS EN 61000-4-2 : 2009 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-2: TESTING AND MEASUREMENT TECHNIQUES - ELECTROSTATIC DISCHARGE IMMUNITY TEST
    BS EN 54-3:2014 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 3: FIRE ALARM DEVICES - SOUNDERS
    BS EN ISO 15791-1 : 2013 PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE
    BS 5306-0:1986 FIRE EXTINGUISHING INSTALLATIONS AND EQUIPMENT ON PREMISES - GUIDE FOR THE SELECTION OF INSTALLED SYSTEMS AND OTHER FIRE EQUIPMENT
    BS 5395-3(1985) : 1985 STAIRS, LADDERS AND WALKWAYS - PART 3: CODE OF PRACTICE FOR THE DESIGN OF INDUSTRIAL TYPE STAIRS, PERMANENT LADDERS AND WALKWAYS
    BS EN 54-5 : 2017 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 5: HEAT DETECTORS - POINT HEAT DETECTORS
    BS EN 1047-1:2005 SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 1: DATA CABINETS AND DISKETTE INSERTS
    BS EN 60598-1:2015 (published 2016-03) Luminaires General requirements and tests
    IEC TS 60695-7-50:2002 Fire hazard testing - Part 7-50: Toxicity of fire effluent - Estimation of toxic potency - Apparatus and test method
    BS EN ISO 10093 : 1999 PLASTICS - FIRE TESTS - STANDARD IGNITION SOURCES
    BS 5266-6(1999) : 1999 EMERGENCY LIGHTING - PART 6: CODE OF PRACTICE FOR NON-ELECTRICAL LOW MOUNTED WAY GUIDANCE SYSTEMS FOR EMERGENCY USE - PHOTOLUMINESCENT SYSTEMS
    BS EN 730-1 : 2002 GAS WELDING EQUIPMENT - SAFETY DEVICES - PART 1: INCORPORATING A FLAME (FLASHBACK) ARRESTOR
    BS 2782-1.140A(1992) : 1992 METHODS OF TESTING PLASTICS - PART 1: THERMAL PROPERTIES - DETERMINATION OF THE BURNING BEHAVIOUR OF HORIZONTAL AND VERTICAL SPECIMENS IN CONTACT WITH A SMALL-FLAME IGNITION SOURCE
    BS EN 1718 : 1999 LIGHT CONVEYOR BELTS - TEST METHOD FOR THE MEASUREMENT OF THE ELECTROSTATIC FIELD GENERATED BY A RUNNING LIGHT CONVEYOR BELT
    BS 5041-3:1975 Fire hydrant systems equipment Specification for inlet breechings for dry riser inlets
    BS 5588-11(1997) : 1997 FIRE PRECAUTIONS IN THE DESIGN, CONSTRUCTION AND USE OF BUILDINGS - PART 11: CODE OF PRACTICE FOR SHOPS, OFFICES, INDUSTRIAL, STORAGE AND OTHER SIMILAR BUILDINGS
    IEC 60050-426:2008 International Electrotechnical Vocabulary (IEV) - Part 426: Equipment for explosive atmospheres
    BS 6458-2.1:1984 FIRE HAZARD TESTING FOR ELECTROTECHNICAL PRODUCTS - TEST METHODS - GLOW-WIRE TEST
    BS 6664-2(1986) : 1986 FLASHPOINT OF PETROLEUM AND RELATED PRODUCTS - METHOD FOR DETERMINATION OF FLASHPOINT (CLOSED CUP EQUILIBRIUM METHOD)
    BS 476-11:1982 Fire tests on building materials and structures Method for assessing the heat emission from building materials
    BS EN 3-6 : 1996 PORTABLE FIRE EXTINGUISHERS - PROVISIONS FOR THE ATTESTATION OF CONFORMITY OF PORTABLE FIRE EXTINGUISHERS IN ACCORDANCE WITH EN 3 PART 1 TO PART 5
    BS EN 1568-2:2008 FIRE EXTINGUISHING MEDIA - FOAM CONCENTRATES - PART 2: SPECIFICATION FOR HIGH EXPANSION FOAM CONCENTRATES FOR SURFACE APPLICATION TO WATER-IMMISCIBLE LIQUIDS
    DD ENV 1187 : 2002 TEST METHODS FOR EXTERNAL FIRE EXPOSURE TO ROOFS
    BS 8434-2(2003) : 2003 METHODS OF TEST FOR ASSESSMENT OF THE FIRE INTEGRITY OF ELECTRIC CABLES - PART 2: TEST FOR UNPROTECTED SMALL CABLES FOR USE IN EMERGENCY CIRCUITS - BS EN 50200 WITH A 930 DEGREE C FLAME AND WITH WATER SPRAY
    BS 5499-5(2002) : 2002 GRAPHIC SYMBOLS AND SIGNS - SAFETY SIGNS, INCLUDING FIRE SAFETY SIGNS - PART 5: SIGNS WITH SPECIFIC SAFETY MEANINGS
    BS 4553-3:1998 Specification for 600/1000 V single-phase split concentric electric cables Cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire
    BS 7899-2(1999) : 1999 CODE OF PRACTICE FOR ASSESSMENT OF HAZARD TO LIFE AND HEALTH FROM FIRE - PART 2 - GUIDANCE ON METHODS FOR THE QUANTIFICATION OF HAZARDS TO LIFE AND HEALTH AND ESTIMATION OF TIME TO INCAPACITATION AND DEATH IN FIRES
    BS EN 62040-1-1:2003 Uninterruptible power systems (UPS) General and safety requirements for UPS used in operator access areas
    BS 6467-2(1988) : 1988 ELECTRICAL APPARATUS WITH PROTECTION BY ENCLOSURE FOR USE IN THE PRESENCE OF COMBUSTIBLE DUSTS - GUIDE TO SELECTION, INSTALLATION AND MAINTENANCE
    BS 6535-3(1989) : 1989 FIRE EXTINGUISHING MEDIA - SPECIFICATION FOR POWDER
    ISO 1523:2002 Determination of flash point Closed cup equilibrium method
    BS 5041-1:1987 Fire hydrant systems equipment Specification for landing valves for wet risers
    BS EN 3-7 : 2004 PORTABLE FIRE EXTINGUISHERS - PART 7: CHARACTERISTICS, PERFORMANCE REQUIREMENTS AND TEST METHODS
    BS EN 13274-4 : 2001 RESPIRATORY PROTECTIVE DEVICES - METHODS OF TEST - PART 4: FLAME TESTS
    BS EN 61310-2 : 2008 SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING
    BS EN 60893-3-6 : 2004 INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 3-6: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - REQUIREMENTS FOR RIGID LAMINATED SHEETS BASED ON SILICONE RESINS
    BS 3900-A11(1974) : 1974 METHODS OF TEST FOR PAINTS - PART A11: SMALL SCALE TEST FOR COMBUSTIBILITY
    BS 476-6(1989) : 1989 FIRE TESTS ON BUILDING MATERIALS AND STRUCTURES - PART 6: METHOD OF TEST FOR FIRE PROPAGATION FOR PRODUCTS
    BS PD6512-3(1987) : 1987 USE OF ELEMENTS OF STRUCTURAL FIRE PROTECTION WITH PARTICULAR REFERENCE TO THE RECOMMENDATIONS GIVEN IN BS 5588 'FIRE PRECAUTIONS IN THE DESIGN AND CONSTRUCTION OF BUILDINGS' - GUIDE TO THE FIRE PERFORMANCE OF GLASS
    BS 7273-3(2000) : 2000 CODE OF PRACTICE FOR THE OPERATION OF FIRE PROTECTION MEASURES - PART 3: ELECTRICAL ACTUATION OF PRE-ACTION SPRINKLER SYSTEMS
    BS EN 60079-7 : 2015 EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015)
    BS EN 81-72 : 2015 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PARTICULAR APPLICATIONS FOR PASSENGER AND GOODS PASSENGER LIFTS - PART 72: FIREFIGHTERS LIFTS
    BS EN 1363-2 : 1999 FIRE RESISTANCE TESTS - PART 2: ALTERNATIVE AND ADDITIONAL PROCEDURES
    BS EN 809 : 1998 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
    BS 476-20(1987) : 1987 FIRE TESTS ON BUILDING MATERIALS AND STRUCTURES - PART 20: METHOD FOR DETERMINATION OF THE FIRE RESISTANCE OF ELEMENTS OF CONSTRUCTION (GENERAL PRINCIPLES)
    BS 7807:1995 CODE OF PRACTICE FOR DESIGN, INSTALLATION AND SERVICING OF INTEGRATED SYSTEMS INCORPORATING FIRE DETECTION AND ALARM SYSTEMS AND/OR OTHER SECURITY SYSTEMS FOR BUILDINGS OTHER THAN DWELLINGS
    BS EN 54-13:2017 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 13: COMPATIBILITY AND CONNECTABILITY ASSESSMENT OF SYSTEM COMPONENTS
    BS EN 671-3:2009 Fixed firefighting systems. Hose systems Maintenance of hose reels with semi-rigid hose and hose systems with lay-flat hose
    BS 5588-0(1996) : 1996 FIRE PRECAUTIONS IN THE DESIGN, CONSTRUCTION AND USE OF BUILDINGS - GUIDE TO FIRE SAFETY CODES OF PRACTICE FOR PARTICULAR PREMISES/APPLICATIONS
    BS EN 50058 : 1999 ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES - PERFORMANCE REQUIREMENTS FOR GROUP II APPARATUS INDICATING UP TO 100% (V/V) GAS
    BS 5225-1(1975) : 1975 PHOTOMETRIC DATA FOR LUMINAIRES - PART 1: PHOTOMETRIC MEASUREMENTS
    PREN 15198 : DRAFT 2005 METHODOLOGY FOR THE IGNITION HAZARD ASSESSMENT OF NON-ELECTRICAL EQUIPMENT AND COMPONENTS FOR INTENDED USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
    BS 476-13(1987) : 1987 FIRE TESTS ON BUILDING MATERIALS AND STRUCTURES - METHOD OF MEASURING THE IGNITABILITY OF PRODUCTS SUBJECTED TO THERMAL IRRADIANCE
    BS 7327-1:1990 Small fixed fire extinguishers Specification for small fixed halon fire extinguishers
    BS EN ISO 17776:2016 (published 2017-01) Petroleum and natural gas industries. Offshore production installations. Major Accident hazard management during the design of new installations
    BS IEC 61511-2 : 2003 AMD 15577 FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 2: GUIDELINES FOR THE APPLICATION OF IEC 61511-1
    BS EN 13541:2012 Glass in building. Security glazing. Testing and classification of resistance against explosion pressure
    BS 5839-8(1998) : 1998 FIRE DETECTION AND FIRE ALARM SYSTEMS FOR BUILDINGS - PART 8: CODE OF PRACTICE FOR THE DESIGN, INSTALLATION, COMMISSIONING AND MAINTENANCE OF VOICE ALARM SYSTEMS
    BS 6739(1986) : 1986 CODE OF PRACTICE FOR INSTRUMENTATION IN PROCESS CONTROL SYSTEMS: INSTALLATION DESIGN AND PRACTICE
    BS 4430-2:1969 RECOMMENDATIONS FOR THE SAFETY OF POWERED INDUSTRIAL TRUCKS - OPERATION AND MAINTENANCE
    BS EN ISO 1523:2002 Method of test for petroleum and its products. Determination of flash point. Closed cup equilibrium method
    BS PD6503-1(1990) : 1990 TOXICITY OF COMBUSTION PRODUCTS - GENERAL
    BS EN ISO 2592:2017 Petroleum and related products. Determination of flash and fire points. Cleveland open cup method
    BS EN 50171:2001 Central power supply systems
    BS 476-21(1987) : 1987 FIRE TESTS ON BUILDING MATERIALS AND STRUCTURES - PART 21: METHODS FOR DETERMINATION OF THE FIRE RESISTANCE OF LOADBEARING ELEMENTS OF CONSTRUCTION
    BS PD7974-3(2003) : 2003 APPLICATION OF FIRE SAFETY ENGINEERING PRINCIPLES TO THE DESIGN OF BUILDINGS - PART 3: STRUCTURAL RESPONSE AND FIRE SPREAD BEYOND THE ENCLOSURE OF ORIGIN (SUB-SYSTEM 3)
    BS ISO/TR 9122-3 : 1993 TOXICITY TESTING OF FIRE EFFLUENTS - METHODS FOR THE ANALYSIS OF GASES AND VAPOURS IN FIRE EFFLUENTS
    BS EN 60079-26:2015 EXPLOSIVE ATMOSPHERES - PART 26: EQUIPMENT WITH EQUIPMENT PROTECTION LEVEL (EPL) GA
    BS EN 13124-1:2001 (published 2001-06) Windows, doors and shutters. Explosion resistance. Test method Shock tube
    BS 476-33(1993) : 1993 FIRE TESTS ON BUILDING MATERIALS AND STRUCTURES - PART 33: FULL-SCALE ROOM TEST FOR SURFACE PRODUCTS
    BS 3900-J8(1993) : 1993 METHODS OF TEST FOR PAINTS - TESTING OF COATING POWDERS - CALCULATION OF LOWER EXPLOSION LIMIT OF COATING POWDERS
    BS 5041-5(1974) : 1974 FIRE HYDRANT SYSTEMS EQUIPMENT - SPECIFICATION FOR BOXES FOR FOAM INLETS AND DRY RISER INLETS
    BS EN 50223:2015 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS
    BS EN 746-1 : 1997 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT
    BS EN ISO 12100-1 : 2003 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
    BS 7971-2:2003 Protective clothing and equipment for use in violent situations and in training Guidance on risk assessment and on the selection, use, cleaning and maintenance of protective clothing and equipment
    BS 6713-3:1986 EXPLOSION PROTECTION SYSTEMS - METHOD FOR DETERMINATION OF EXPLOSION INDICES OF FUEL/AIR MIXTURES OTHER THAN DUST/AIR AND GAS/AIR MIXTURES
    BS EN ISO 12241:2008 Thermal insulation for building equipment and industrial Installations. Calculation rules
    BS EN 50272-3 : 2002 SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 3: TRACTION BATTERIES
    BS EN 50104:2010 Electrical apparatus for the detection and measurement of oxygen. Performance requirements and test methods
    BS EN 12845:2015 Fixed firefighting systems. Automatic sprinkler systems. Design, installation and maintenance
    BS 5306-6.2(1989) : 1989 FIRE EXTINGUISHING INSTALLATIONS AND EQUIPMENT ON PREMISES - FOAM SYSTEMS - SPECIFICATION FOR MEDIUM AND HIGH EXPANSION FOAM SYSTEMS
    00/541672 DC : DRAFT NOV 2000 BS EN 14043 - AUTOMATIC TURNTABLE LADDERS FOR FIRE SERVICE USE - REQUIREMENTS AND TEST METHODS
    BS KIT 126 : 2003 COMPONENTS FOR SPRINKLER AND WATER SPRAY SYSTEMS
    BS 5306-1(1976) : 1976 FIRE EXTINGUISHING INSTALLATIONS AND EQUIPMENT ON PREMISES - HYDRANT SYSTEMS HOSE REELS AND FOAM INLETS
    BIP 2007 : 2003 BASIC GUIDE TO FIRE ENGINEERING
    BS 7273-2(1992) : 1992 CODE OF PRACTICE FOR THE OPERATION OF FIRE PROTECTION MEASURES - PART 2: MECHANICAL ACTUATION OF GASEOUS TOTAL FLOODING AND LOCAL APPLICATION EXTINGUISHING SYSTEMS
    BS 2000-35(1993) : 1993 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF OPEN FLASH AND FIRE POINT - PENSKY-MARTENS METHOD
    BS 476-15(1993) : 1993 FIRE TESTS ON BUILDING MATERIALS AND STRUCTURES - METHOD FOR MEASURING THE RATE OF HEAT RELEASE OF PRODUCTS
    BS EN 1366-5:2010 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 5: SERVICE DUCTS AND SHAFTS
    BS ISO 11925-3 : 1997 REACTION TO FIRE TESTS - IGNITABILITY OF BUILDING PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - MULTI-SOURCE TEST
    BS EN 340:2003 Protective clothing. General requirements
    DD ENV 13381-4 : 2002 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 4: APPLIED PROTECTION TO STEEL MEMBERS
    BS PD7974-4(2003) : 2003 APPLICATION OF FIRE SAFETY ENGINEERING PRINCIPLES TO THE DESIGN OF BUILDINGS - PART 4: DETECTION OF FIRE AND ACTIVATION OF FIRE PROTECTION SYSTEMS (SUB-SYSTEM 4)
    BS EN 50381:2004 Transportable ventilated rooms with or without an internal source of release
    BS EN 13463-2 : 2004 NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 2: PROTECTION BY FLOW RESTRICTING ENCLOSURE 'FR'
    BS 5345-2(1983) : 1983 CODE OF PRACTICE FOR SELECTION INSTALL & MAINTENANCE OF ELECTRICAL APPARATUS FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - CLASSIFICATION OF HAZARDOUS AREAS
    BS ISO TR 13387-8 : 1999 FIRE SAFETY ENGINEERING - PART 8: LIFE SAFETY - OCCUPANT BEHAVIOUR, LOCATION AND CONDITION
    BS 8434-1(2003) : 2003 METHODS OF TEST FOR ASSESSMENT OF THE FIRE INTEGRITY OF ELECTRIC CABLES - PART 1: TEST FOR UNPROTECTED SMALL CABLES FOR USE IN EMERGENCY CIRCUITS - BS EN 50200 WITH ADDITION OF WATER SPRAY
    DD IEC TS 60695-11-40 : 2002 FIRE HAZARD TESTING - PART 11-40: TEST FLAMES - CONFIRMATORY TESTS - GUIDANCE
    BS 6713-4:1986 EXPLOSION PROTECTION SYSTEMS - METHOD FOR DETERMINATION OF EFFICACY OF EXPLOSION SUPPRESSION SYSTEMS
    DD ENV 13381-7 : 2002 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 7: APPLIED PROTECTION TO TIMBER MEMBERS
    BS EN 60695-1-30:2017 FIRE HAZARD TESTING - PART 1-30: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - PRESELECTION TESTING PROCESS - GENERAL GUIDELINES (IEC 60695-1-30:2017)
    BS EN 60519-9 : 2005 SPECIFICATION FOR SAFETY IN ELECTROHEAT INSTALLATIONS - PART 9: PARTICULAR REQUIREMENTS FOR HIGH-FREQUENCY DIELECTRIC HEATING INSTALLATIONS
    BS EN 14043 : 2014 HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH COMBINED MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS
    BS EN 3-3 : 1996 PORTABLE FIRE EXTINGUISHERS - CONSTRUCTION, RESISTANCE TO PRESSURE, MECHANICAL TESTS
    BS 5839-3(1988) : 1988 FIRE DETECTION AND ALARM SYSTEMS FOR BUILDINGS - PART 3: SPECIFICATION FOR AUTOMATIC RELEASE MECHANISMS FOR CERTAIN FIRE PROTECTION EQUIPMENT
    BS 5041-4:1975 Fire hydrant systems equipment Specification for boxes for landing valves for dry risers
    BS EN 12259-4:2000 Fixed firefighting systems. Components for sprinkler and water spray systems Water motor alarms
    TH 42065 : 2008 ELECTRICAL EQUIPMENT FOR FLAMMABLE ATMOSPHERES - AN INTERNATIONAL SURVEY OF REGULATIONS, TESTS AND CERTIFICATION REQUIREMENTS
    BS EN 50176:2009 Stationary electrostatic application equipment for ignitable liquid coating material. Safety requirements
    BS 490-11.2(1991) : 1991 CONVEYOR AND ELEVATOR BELTING - METHODS OF TEST FOR SAFETY - LOW ENERGY AND HIGH ENERGY PROPANE GALLERY TESTS
    BS 476-10(1983) : 1983 FIRE TESTS ON BUILDING MATERIALS AND STRUCTURES - GUIDE TO THE PRINCIPLES AND APPLICATION OF FIRE TESTING
    BS 7982:2001 Guidance on the environmental impact of large-scale fires involving plastics materials
    BS EN 61197 : 1996 INSULATING LIQUIDS - LINEAR FLAME PROPAGATION - TEST METHOD USING A GLASS-FIBRE TAPE
    BS EN 60695-2-11:2014 Fire hazard testing Glowing/hot-wire based test methods. Glow-wire flammability test method for end-products (GWEPT)
    BS 476-24(1987) : 1987 FIRE TESTS ON BUILDING MATERIALS AND STRUCTURES - PART 24: METHOD FOR DETERMINATION OF THE FIRE RESISTANCE OF VENTILATION DUCTS
    BS 6467-1(1985) : 1985 ELECTRICAL APPARATUS WITH PROTECTION BY ENCLOSURE FOR USE IN THE PRESENCE OF COMBUSTIBLE DUSTS - SPECIFICATION FOR APPARATUS
    BS EN 54-10 : 2002 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 10: FLAME DETECTORS - POINT DETECTORS
    BS EN 61144 : 1993 TEST METHOD FOR THE DETERMINATION OF OXYGEN INDEX OF INSULATING LIQUIDS
    BS 5839-4(1988) : 1988 FIRE DETECTION AND ALARM SYSTEMS FOR BUILDINGS - SPECIFICATION FOR CONTROL AND INDICATING EQUIPMENT
    BS 6244(1982) : 1982 CODE OF PRACTICE FOR STATIONARY AIR COMPRESSORS
    BS 6207-3(2001) : 2001 MINERAL INSULATED CABLES WITH A RATED VOLTAGE NOT EXCEEDING 750 V - GUIDE TO USE
    BS 5410-2:1978 CODE OF PRACTICE FOR OIL FIRING - INSTALLATIONS OF 44 KW AND ABOVE OUTPUT CAPACITY FOR SPACE HEATING HOT WATER AND STEAM SUPPLY PURPOSES
    BS EN 136 : 1998 RESPIRATORY PROTECTIVE DEVICES - FULL FACE MASKS - REQUIREMENTS, TESTING, MARKING
    BS EN 60079-1:2014 EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
    BS 8300(2001) : 2001 DESIGN OF BUILDINGS AND THEIR APPROACHES TO MEET THE NEEDS OF DISABLED PEOPLE - CODE OF PRACTICE
    BS PD7974-7(2003) : 2003 APPLICATION OF FIRE SAFETY ENGINEERING PRINCIPLES TO THE DESIGN OF BUILDINGS - PART 7: PROBABILISTIC RISK ASSESSMENT
    BS 5395-2(1984) : 1984 STAIRS, LADDERS AND WALKWAYS - PART 2: CODE OF PRACTICE FOR THE DESIGN OF HELICAL AND SPIRAL STAIRS
    BS EN 50271:2010 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen. Requirements and tests for apparatus using software and/or digital technologies
    BS EN 13355 : 2004 COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
    BS 8218(1998) : 1998 CODE OF PRACTICE FOR MASTIC ASPHALT ROOFING
    BS EN 420 : 2003 PROTECTIVE GLOVES - GENERAL REQUIREMENTS AND TEST METHODS
    BS 7974:2001 CODE OF PRACTICE ON THE APPLICATION OF FIRE SAFETY ENGINEERING PRINCIPLES TO THE DESIGN OF BUILDINGS
    BS 4422:2005 Fire. Vocabulary
    BS EN 50266-1 : 2001 COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - TEST FOR VERTICAL FLAME SPREAD OF VERTICALLY-MOUNTED BUNCHED WIRES OR CABLES - PART 1: APPARATUS
    BS EN 1762:2017 RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION
    BS EN 179 : 2008 BUILDING HARDWARE - EMERGENCY EXIT DEVICES OPERATED BY A LEVER HANDLE OR PUSH PAD, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS
    BS PD TR 13480-7 : 2002 METALLIC INDUSTRIAL PIPING - GUIDANCE ON THE USE OF CONFORMITY ASSESSMENT PROCEDURES
    BS EN 60801-2:1993 (published 1993-06) Electromagnetic compatibility for industrial-process measurement and control equipment Electrostatic discharge requirements
    BS EN 1839:2017 (published 2017-01) Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours
    BS EN 13480-4:2017 (published 2017-09) Metallic industrial piping Fabrication and installation
    BS 476-12:1991 Fire tests on building materials and structures Method of test for ignitability of products by direct flame impingement
    BS EN 1866 : 2005 MOBILE FIRE EXTINGUISHERS
    BS 5173-103.13:1994 Methods of test for rubber and plastics hoses and hose assemblies. Physical tests Determination of resistance to fire
    IEC 61241-2-1:1994 Electrical apparatus for use in the presence of combustible dust - Part 2: Test methods - Section 1: Methods for determining the minimum ignition temperatures of dust
    BS EN ISO 15029-1 : 2000 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF SPRAY IGNITION CHARACTERISTICS OF FIRE-RESISTANT FLUIDS - PART 1: SPRAY FLAME PERSISTANCE - HOLLOW-CONE NOZZLE METHOD
    BS 1230-1(1985) : 1985 GYPSUM PLASTERBOARD - SPECIFICATION FOR PLASTERBOARD EXCLUDING MATERIALS SUBMITTED TO SECONDARY OPERATIONS
    BS EN 13463-5 : 2011 NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C'
    BS 6287(1982) : 1982 CODE OF PRACTICE FOR SAFE OPERATION OF TRACTION BATTERIES
    BS 3958-6:1972 Thermal insulating materials Finishing materials; hard setting composition, self-setting cement and gypsum plaster
    BS EN 13673-1 : 2003 DETERMINATION OF THE MAXIMUM EXPLOSION PRESSURE AND THE MAXIMUM RATE OF PRESSURE RISE OF GASES AND VAPOURS - DETERMINATION OF THE MAXIMUM EXPLOSION PRESSURE
    DD IEC TS 60695-11-4 : 2004 FIRE HAZARD TESTING - PART 11-4: TEST FLAMES - 50 W FLAME - APPARATUS AND CONFIRMATIONAL TEST METHOD
    PREN 14351-2 : DRAFT 2014 WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 2: INTERNAL PEDESTRIAN DOORSETS WITHOUT RESISTANCE TO FIRE AND /OR SMOKE LEAKAGE CHARACTERISTICS
    BS EN 60332-2-1 : 2004 TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 2-1: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE SMALL INSULATED WIRE OR CABLE - APPARATUS
    BS 5309-4:1976 METHODS FOR SAMPLING CHEMICAL PRODUCTS - SAMPLING OF SOLIDS
    BS 5588-1(1990) : 1990 FIRE PRECAUTIONS IN THE DESIGN, CONSTRUCTION AND USE OF BUILDINGS - PART 1: CODE OF PRACTICE FOR RESIDENTIAL BUILDINGS
    BS 5803-4(1985) : 1985 THERMAL INSULATION FOR USE IN PITCHED ROOF SPACES IN DWELLINGS - PART 4: METHODS FOR DETERMINING FLAMMABILITY AND RESISTANCE TO SMOULDERING
    BS 476-31.1(1983) : 1983 FIRE TESTS ON BUILDING MATERIALS AND STRUCTURES - PART 31: METHODS FOR MEASURING SMOKE PENETRATION THROUGH DOORSETS AND SHUTTER ASSEMBLIES - SECTION 31.1: METHOD OF MEASUREMENT UNDER AMBIENT TEMPERATURE CONDITIONS
    BS 3958-4(1982) : 1982 THERMAL INSULATING MATERIALS - BONDED PREFORMED MAN-MADE MINERAL FIBRE PIPE SECTIONS
    BS 5499-4:2000 SAFETY SIGNS, INCLUDING FIRE SAFETY SIGNS - PART 4: CODE OF PRACTICE FOR ESCAPE ROUTE SIGNING
    BS EN 1593 : 1999 NON-DESTRUCTIVE TESTING - LEAK TESTING - BUBBLE EMISSION TECHNIQUES
    BS ISO 13344:2015 ESTIMATION OF THE LETHAL TOXIC POTENCY OF FIRE EFFLUENTS
    BS 7944(1999) : 1999 TYPE 1 HEAVY DUTY FIRE BLANKETS AND TYPE 2 HEAVY DUTY HEAT PROTECTIVE BLANKETS
    BS ISO TR 5925-2 : 1997 FIRE TESTS - SMOKE CONTROL DOOR AND SHUTTER ASSEMBLIES - COMMENTARY ON TEST METHOD AND TEST DATA APPLICATION
    BS 6941(1988) : 1988 SPECIFICATION FOR ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES WITH TYPE OF PROTECTION N
    BS EN 2 : 1992 CLASSIFICATION OF FIRES
    DD IEC TS 60695-7-51 : 2002 FIRE HAZARD TESTING - PART 7-51: TOXICITY OF FIRE EFFLUENT - ESTIMATION OF TOXIC POTENCY: CALCULATION AND INTERPRETATION OF TEST RESULTS
    BS EN 694 : 2014 FIRE-FIGHTING HOSES - SEMI-RIGID HOSES FOR FIXED SYSTEMS
    BS 6713-1:1986 EXPLOSION PROTECTION SYSTEMS - METHOD FOR DETERMINATION OF EXPLOSION INDICES OF COMBUSTIBLE DUSTS IN AIR
    BS 7244:1990 SPECIFICATION FOR FLAME ARRESTERS FOR GENERAL USE
    BIP 2003 : 2003 FIRE EXTINGUISHING SYSTEMS - A GUIDE TO THE TYPES, APPLICATION AND CONSIDERATIONS
    BS 7629-2(1997) : 1997 SPECIFICATION FOR 300/500 V FIRE RESISTANT ELECTRIC CABLES HAVING LOW EMISSION OF SMOKE AND CORROSIVE GASES WHEN AFFECTED BY FIRE - PART 2: MULTIPAIR CABLES
    BS EN 50266-2-4 : 2001 COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - TEST FOR VERTICAL FLAME SPREAD OF VERTICALLY-MOUNTED BUNCHED WIRES OR CABLES - PART 2-4: PROCEDURES - CATEGORY C
    BS EN 12416-1 : 2001 FIXED FIREFIGHTING SYSTEMS - POWDER SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
    BS EN 61340-4-3 : 2002 ELECTROSTATICS - PART 4-3: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - FOOTWEAR
    BS 5427-1(1996) : 1996 CODE OF PRACTICE FOR THE USE OF PROFILED SHEET FOR ROOF AND WALL CLADDING ON BUILDINGS - DESIGN
    BS 5516-1(2004) : 2004 PATENT GLAZING AND SLOPING GLAZING FOR BUILDINGS - PART 1: CODE OF PRACTICE FOR DESIGN AND INSTALLATION OF SLOPING AND VERTICAL PATENT GLAZING
    04/30117071 DC : DRAFT JUL 2004 EN 14994 - GAS EXPLOSION VENTING PROTECTIVE SYSTEMS
    BS EN 1149-1:2006 Protective clothing. Electrostatic properties Test method for measurement of surface resistivity
    BS 7990(2003) : 2003 TUBE FURNACE METHOD FOR THE DETERMINATION OF TOXIC PRODUCT YIELDS IN FIRE EFFLUENTS
    BS 7036-2(1996) : 1996 CODE OF PRACTICE FOR SAFETY AT POWERED DOORS FOR PEDESTRIAN USE - STRAIGHT AND CURVED SLIDING DOORS AND PRISMATIC AND FOLDING DOORS
    BS 7346-1(1990) : 1990 COMPONENTS FOR SMOKE AND HEAT CONTROL SYSTEMS - SPECIFICATION FOR NATURAL SMOKE AND HEAT EXHAUST VENTILATORS
    BS 5266-3:1981 EMERGENCY LIGHTING - SPECIFICATION FOR SMALL POWER RELAYS (ELECTROMAGNETIC) FOR EMERGENCY LIGHTING APPLICATIONS UP TO AND INCLUDING 32 A
    BS KIT 141 : 2004 PD 7974 SERIES - FIRE SAFETY ENGINEERING PRINCIPLES FOR THE DESIGN OF BUILDINGS
    IEC 62305-3:2010 Protection against lightning - Part 3: Physical damage to structures and life hazard
    BS 3566:1982 Specification for lightweight salvage sheets for fire service use
    BS EN 167 : 2002 PERSONAL EYE PROTECTION - OPTICAL TEST METHODS
    BS 6262(1982) : 1982 CODE OF PRACTICE FOR GLAZING FOR BUILDINGS
    BS EN 1366-3:2009 Fire resistance tests for service installations Penetration seals
    BS 5173-103.6:1990 Methods of test for rubber and plastics hoses and hose assemblies. Physical tests Determination of ignitability of lining
    BS EN 50057 : 1999 ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES - PERFORMANCE REQUIREMENTS FOR GROUP 2 APPARATUS INDICATING UP TO 100% LOWER EXPLOSIVE LIMIT
    BS EN 13478 : 2002 SAFETY OF MACHINERY - FIRE PREVENTION AND PROTECTION
    BS 5598-2(1979) : 1979 METHODS OF SAMPLING AND TEST FOR HALOGENATED HYDROCARBONS - SAMPLING OF LIQUEFIED GASES
    02/122678 DC : DRAFT JULY 2002 EN 14489 - FIRE-RESISTANT HYDRAULIC FLUIDS - CLASSIFICATION AND SPECIFICATION - GUIDELINES ON SELECTION OF THE PROTECTION OF SAFETY, HEALTH AND THE ENVIRONMENT
    BS EN 367 : 1992 PROTECTIVE CLOTHING - PROTECTION AGAINST HEAT AND FIRE - METHOD OF DETERMINING HEAT TRANSMISSION ON EXPOSURE TO FLAME
    BS EN 60332-1-1 : 2004 TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-1: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - APPARATUS
    BS 476-32:1989 Fire tests on building materials and structures Guide to full scale fire tests within buildings
    BS 7481(1992) : 1992 CODE OF PRACTICE FOR TESTING VENTING SYSTEMS AND SHIELDS FOR LEAD-ACID STARTER BATTERIES
    IEC 61241-14:2004 Electrical apparatus for use in the presence of combustible dust - Part 14: Selection and installation
    BS EN 1726-2 : 2000 SAFETY OF INDUSTRIAL TRUCKS - SELF-PROPELLED TRUCKS UP TO AND INCLUDING 10 000 KG CAPACITY AND TRACTORS WITH A DRAWBAR PULL UP TO AND INCLUDING 20 000 N - PART 2: ADDITIONAL REQUIREMENTS FOR TRUCKS WITH ELEVATING OPERATOR POSITION AND TRUCKS SPECIFICALLY DESIGNED TO TRAVEL WITH ELEVATED LOADS
    BS 5266-2(1998) : 1998 EMERGENCY LIGHTING - CODE OF PRACTICE FOR ELECTRICAL LOW MOUNTED WAY GUIDANCE SYSTEMS FOR EMERGENCY USE
    BS 476-22(1987) : 1987 FIRE TESTS ON BUILDING MATERIALS AND STRUCTURES - PART 22: METHODS FOR DETERMINATION OF THE FIRE RESISTANCE OF NON-LOADBEARING ELEMENTS OF CONSTRUCTION
    BS 6767-2(1998) : 1998 TRANSPORTABLE ACCOMMODATION UNITS - RECOMMENDATIONS FOR DESIGN AND INSTALLATION OF SERVICES AND FITTINGS WITH GUIDANCE ON TRANSPORTATION, SITTING AND ASPECTS RELATING TO HABITATION
    BS 5588-7(1997) : 1997 FIRE PRECAUTIONS IN THE DESIGN, CONSTRUCTION AND USE OF BUILDINGS - PART 7: CODE OF PRACTICE FOR THE INCORPORATION OF ATRIA IN BUILDINGS
    BS EN 3-2 : 1996 PORTABLE FIRE EXTINGUISHERS - TIGHTNESS, DIELECTRIC TEST, TAMPING TEST, SPECIAL PROVISIONS
    BS 5946:1980 Method of test for determination of the punking behaviour of phenol-formaldehyde foam
    1994/9/EC : 1994 DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
    1997/23/EC : 1997 DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT
    BS EN 60893-2:2004 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Methods of test
    BS EN 1088 : 1995 SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective