PIPELINE SYSTEMS - PART 1: STEEL PIPELINES ON LAND - CODE OF PRACTICE

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2015

Publisher

British Standards Institution

Foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Health, safety and assurance
5 Design - System and safety
6 Design - Mechanical integrity
7 Design - Stations and terminals
8 Design - Materials and coatings
9 Design - Corrosion management
10 Construction - Fabrication and installation
11 Construction - Testing
12 Pre-commissioning and commissioning
13 Operation, maintenance and integrity assurance
   management
14 Abandonment
Annexes
Annex A (informative) - Extent of pipeline systems for
        conveying oil and gas that are covered by this part
        of PD 8010
Annex B (normative) - Quality assurance
Annex C (normative) - Records and document control
Annex D (informative) - Hazards in pipeline design
Annex E (normative) - Safety evaluation of pipelines
Annex F (normative) - Pipeline route selection
Annex G (normative) - Loads
Annex H (informative) - Buckling
Annex I (informative) - Planning and legal
Bibliography

Defines recommendations for and guidance on the design, selection, specification and use of materials, routeing, land acquisition, construction, installation, testing, operation, maintenance and abandonment of land pipeline systems constructed from steel.

Committee	PSE/17/2
DevelopmentNote	Supersedes BS PD8010-1(2004) & 14/30286897 DC. (03/2015) Supersedes 16/30344659 DC. 2015 Edition Re-Issued in November 2016 & incorporates AMD 1 2016. (11/2016)
DocumentType	Standard
Pages	174
PublisherName	British Standards Institution
Status	Current

BS EN 437 : 2003	TEST GASES - TEST PRESSURES - APPLIANCE CATEGORIES
BS ISO 7005-1:2011	Pipe flanges Steel flanges for industrial and general service piping systems
BS EN ISO 148-1:2016	Metallic materials. Charpy pendulum impact test Test method
BS EN ISO 9004:2009	Managing for the sustained success of an organization. A quality management approach
BS 5607:1998	Code of practice for the safe use of explosives in the construction industry
DIN 30670:2012-04	Polyethylene coatings on steel pipes and fittings - Requirements and testing
BS EN ISO 9001:2015	Quality management systems. Requirements
ISO 15590-1:2009	Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 1: Induction bends
PD 8010-5:2013	Pipeline systems Subsea pipelines. Guide to operational practice
NACE TM 02 84 : 2016	EVALUATION OF PIPELINE AND PRESSURE VESSEL STEELS FOR RESISTANCE TO HYDROGEN-INDUCED CRACKING
API 5LC : 2015	CRA LINE PIPE
ASME PV CODE 8 DIV 1 : 2017	BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1
ISO 21467:2004	Earth-moving machinery — Horizontal directional drills — Terminology and specifications
API 6A : 2010	SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT
ISO 14313:2007	Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves
ASME B31.8 : 2016	Gas Transmission and Distribution Piping Systems
ASME B16.11 : 2016	FORGED FITTINGS, SOCKET-WELDING AND THREADED
BS EN 815 : 1997	SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS
BS EN 10217-2 : 2002	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
BS EN ISO 15610:2003	Specification and qualification of welding procedures for metallic materials. Qualification based on tested welding consumables
ASME B31.3:2016	PROCESS PIPING
BS 3618-3:1971	Glossary of mining terms Boring and exploration
BS ISO 10474:2013	Steel and steel products. Inspection documents
BS 5949:1980	Specification for asbestos-cement pipes and joints for thrust-boring and pipe jacking
BS EN 1992-1-1 : 2004	EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
BS EN ISO 15607:2003	Specification and qualification of welding procedures for metallic materials. General rules
BS EN ISO 15653:2010	Metallic materials. Method of test for the determination of quasistatic fracture toughness of welds
BS EN 60079-10-1:2015	Explosive atmospheres Classification of areas. Explosive gas atmospheres
BS EN ISO 9606-1:2017	Qualification testing of welders. Fusion welding Steels
BS EN 10224:2002	Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids. Technical delivery conditions
ASME B16.20 : 2012	METALLIC GASKETS FOR PIPE FLANGES
BS EN ISO 3183 : 2012	PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS
API 5L : 2012	LINE PIPE
BS EN ISO 14001:2015	Environmental management systems. Requirements with guidance for use
ISO 15590-3:2004	Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 3: Flanges
PD 8010-4:2012	Pipeline systems Steel pipelines on land and subsea pipelines. Code of practice for integrity management
BS EN 13480-3:2017	Metallic industrial piping Design and calculation
BS EN 60079-14:2014	Explosive atmospheres Electrical installations design, selection and erection
NACE MR 01 75 : 2003	METALS FOR SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING RESISTANCE IN SOUR OILFIELD ENVIRONMENTS
BS 6100-3:2007	Building and civil engineering. Vocabulary Civil engineering. General
BS EN 1594:2013	Gas infrastructure. Pipelines for maximum operating pressure over 16 bar. Functional requirements
ISO 15589-1:2015	Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline systems — Part 1: On-land pipelines
BS EN 12336 : 2005	TUNNELLING MACHINES - SHIELD MACHINES, THRUST BORING MACHINES, AUGER BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS
BS EN 12110:2014	Tunnelling machines. Air locks. Safety requirements
BS ISO 1143:2010	Metallic materials. Rotating bar bending fatigue testing
BS EN 12111:2014	Tunnelling machines. Road headers and continuous miners. Safety requirements
ISO 15590-2:2003	Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 2: Fittings
BS ISO 15649:2001	Petroleum and natural gas industries. Piping
BS EN 10217-5:2002	Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
BS EN 295-7:2013	Vitrified clay pipe systems for drains and sewers Requirements for pipes and joints for pipe jacking
BS EN ISO 21809-1:2011	Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Polyolefin coatings (3-layer PE and 3-layer PP)
ISO 21809-3:2016	Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings
BS EN ISO 16708:2006	Petroleum and natural gas industries. Pipeline transportation systems. Reliability-based limit state methods
MSS SP 44 : 2016	STEEL PIPELINE FLANGES
BS 3518-3:1963	Methods of fatigue testing Direct stress fatigue tests
BS 6349-1-4:2013	Maritime works General. Code of practice for materials
ASME B16.5 : 2017	PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD
ASME B16.21 : 2016	NONMETALLIC FLAT GASKETS FOR PIPE FLANGES
BS EN 10216-1:2013	Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties
NFPA 30 : 2018	FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE
BS EN ISO 80000-1:2013	Quantities and units General
BS 3618-8:1974	Glossary of mining terms Winning and working
ASME B16.9 : 2012	FACTORY-MADE WROUGHT BUTTWELDING FITTINGS
BS EN 14161 : 2011	PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS (ISO 13623:2009 MODIFIED)
BS EN 10217-1:2002	Welded steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties
BS 6164:2011	Code of practice for health and safety in tunnelling in the construction industry
BS PD8010-3(2009) : 2009	PIPELINE SYSTEMS - PART 3: STEEL PIPELINES ON LAND - GUIDE TO THE APPLICATION OF PIPELINE RISK ASSESSMENT TO PROPOSED DEVELOPMENTS IN THE VICINITY OF MAJOR ACCIDENT HAZARD PIPELINES CONTAINING FLAMMABLES - SUPPLEMENT TO PD 8010-1:2004
BS 3293:1960	Specification for carbon steel pipe flanges (over 24 inches nominal size) for the petroleum industry
BS 4515-2:1999	Specification for welding of steel pipelines on land and offshore Duplex stainless steel pipelines
BS ISO 12107:2003	Metallic materials. Fatigue testing. Statistical planning and analysis of data
BS 5911-120:1989	Precast concrete pipes, fittings and ancillary products Specification for reinforced jacking pipes with flexible joints
ASME B16.47 : 2017	LARGE DIAMETER STEEL FLANGES: NPS 26 THROUGH NPS 60 METRIC/INCH STANDARD
BS EN 10216-2:2013	Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified elevated temperature properties
BS EN ISO 9000:2015	Quality management systems. Fundamentals and vocabulary
BS ISO 21809-4:2009	Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Polyethylene coatings (2-layer PE)
BS EN ISO 21809-2:2014	Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Single layer fusion-bonded epoxy coatings
ISO 13623:2017	Petroleum and natural gas industries — Pipeline transportation systems
BS EN 10204:2004	Metallic products. Types of inspection documents
API 5LD : 2017	CRA CLAD OR LINED STEEL PIPE