POWER TRANSFORMERS - PART 1: GENERAL

Available format(s)

Hardcopy , PDF

Language(s)

English - Italian

Published date

01-01-2015

Publisher

Comitato Elettrotecnico Italiano

FOREWORD
1. Scope
2. Normative references
3. Terms and definitions
4. Service conditions
5. Rating and general requirements
6. Requirements for transformers
    having a tapped winding
7. Connection phase displacement symbols
8. Rating plates
9. Safety, environmental and other requirements
10. Tolerances
11. Tests
12. Electromagnetic compatibility (EMC)
13. High frequency switching transients
Annex A (informative) - Check list of information
        to be provided with enquiry and order
Annex B (informative) - Examples of specifications
        for transformers with tappings
Annex C (informative) - Specification of short-circuit
        impedance by boundaries
Annex D (informative) - Examples of three-phase
        transformer connections
Annex E (normative) - Temperature correction of
        load loss
Annex F (informative) - Facilities for future fitting of
        condition monitoring systems to Transformers
Annex G (informative) - Environmental and safety
        considerations
Bibliography
Annex ZA (normative) - Normative references to
         international publications with their
         corresponding European publications

Describes the three-phase and single-phase power transformers (including auto-transformers) with the exception of certain categories of small and special transformers such as single-phase transformers with rated power less than 1 kVA and three-phase transformers less than 5 kVA.

Committee	CT 14
DevelopmentNote	Classificazione CEI 14-4/1 (08/2001) Supersedes CEI 14-4, CEI 14-4 V1, CEI 14-4 V2, CEI 14-4 V3 and CEI 14-4 V4. (03/2004)
DocumentType	Standard
Pages	152
PublisherName	Comitato Elettrotecnico Italiano
Status	Current
Supersedes	CEI 14-4 V1 : 1985 CEI 14-4 V4 : 1990 CEI 14-4 V2 : 1988 CEI 14-4 V3 : 1988 CEI 14-4 : 2ED 1983

Standards	Relationship
IEC 60076-1:2011	Identical
EN 60076-1:2011	Identical

IEC 60076-15:2015	Power transformers - Part 15: Gas-filled power transformers
IEC 60270:2000+AMD1:2015 CSV	High-voltage test techniques - Partial discharge measurements
IEC 60076-7:2005	Power transformers - Part 7: Loading guide for oil-immersed power transformers
EN 60214-1:2014	Tap-changers - Part 1: Performance requirements and test methods
CEI 10-1 : 8ED 1997	OLI MINERALI ISOLANTI PER TRASFORMATORI E PER APPARECCHIATURE ELETTRICHE
IEC TR 60616:1978	Terminal and tapping markings for power transformers
EN 60076-5:2006	Power transformers - Part 5: Ability to withstand short-circuit
IEC 60076-10:2016	Power transformers - Part 10: Determination of sound levels
EN 60076-11:2004	Power transformers - Part 11: Dry-type transformers
IEC 60076-5:2006	Power transformers - Part 5: Ability to withstand short circuit
ISO 3:1973	Preferred numbers Series of preferred numbers
IEEE C57.12.00-2015	IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
CEI 14-43 : 2011	GUIDE FOR THE APPLICATION, SPECIFICATION, AND TESTING OF PHASE-SHIFTING TRANSFORMERS
CEI 14-42 : 2011	CONVERTER TRANSFORMERS - PART 3: APPLICATION GUIDE
IEC 60068-3-3:1991	Environmental testing - Part 3-3: Guidance - Seismic test methods for equipments
IEC 60076-4:1976	Power transformers - Part 4: Tappings and connections
IEC 60076-8:1997	Power transformers - Part 8: Application guide
IEEE C57.12.90-2010	IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers
IEC 60076-12:2008	Power transformers - Part 12: Loading guide for dry-type power transformers
EN 60076-10:2016	Power transformers - Part 10: Determination of sound levels
IEC 60296:2012 RLV	Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear
IEC 60076-3:2013	Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air
IEC 60050-421:1990	International Electrotechnical Vocabulary (IEV) - Part 421: Power transformers and reactors
EN ISO 9001:2015	Quality management systems - Requirements (ISO 9001:2015)
EN 60296:2012	Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV	Degrees of protection provided by enclosures (IP Code)
CEI 14-45 : 2012	POWER TRANSFORMERS DETERMINATION OF SOUND LEVELS - APPLICATION GUIDE
IEC 60076-6:2007	Power transformers - Part 6: Reactors
IEC 62032:2012	Guide for the Application, Specification and Testing of Phase-Shifting Transformers
ISO 14001:2015	Environmental management systems — Requirements with guidance for use
IEEE C57.142 : 2010	GUIDE TO DESCRIBE THE OCCURRENCE AND MITIGATION OF SWITCHING TRANSIENTS INDUCED BY TRANSFORMERS, SWITCHING DEVICE, AND SYSTEM INTERACTION
IEC 62262:2002	Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
ISO 9001:2015	Quality management systems — Requirements
ISO 2178:2016	Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method
IEC 61378-2:2001	Convertor transformers - Part 2: Transformers for HVDC applications
IEC 60076-2:2011	Power transformers - Part 2: Temperature rise for liquid-immersed transformers
IEC TS 60076-14:2009	Power transformers - Part 14: Design and application of liquid-immersed power transformers using high-temperature insulation materials
IEC 60076-13:2006	Power transformers - Part 13: Self-protected liquid-filled transformers
ISO 2409:2013	Paints and varnishes Cross-cut test
EN 60076-2:2011	Power transformers - Part 2: Temperature rise for liquid-immersed transformers
CEI 36-2 : 3ED 1987
EN 60721-3-4:1995/A1:1997	CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - PART 3: CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - SECTION 4: STATIONARY USE AT NON-WEATHER-PROTECTED LOCATIONS
IEC 60076-10-1:2016	Power transformers - Part 10-1: Determination of sound levels - Application guide
IEC 60076-16:2011	Power transformers - Part 16: Transformers for wind turbine applications
IEC 61378-1:2011	Converter transformers - Part 1: Transformers for industrial applications
IEC 60214-1:2014	Tap-changers - Part 1: Performance requirements and test methods
IEC 60310:2016	Railway applications - Traction transformers and inductors on board rolling stock

View more information

£233.68

Excluding VAT

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

CEI EN 60076-1 : 2015

POWER TRANSFORMERS - PART 1: GENERAL

Table of Contents

Abstract

General Product Information

International Equivalents

Standards Referencing This Book

Category

Subcategory