CSA C22.2 No. 272 : 2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
16-11-2019
English, French
01-01-2014
Preface
1 Scope
2 Reference publications
3 Definitions
4 General requirements
5 Grid or external supply disconnection devices and conductor
terminations
6 Protection against electric shock
7 Protection of equipment
8 Grounding and bonding
9 Operator interface
10 Conductors and cables
11 Wiring methods
12 Working spaces
13 Accessories
14 Markings, warning signs, and equipment identification
15 Technical documentation
Pertains to complete wind turbine electrical systems and associated electrical equipment intended for connection at not more than 46 kV and intended for use in accordance with the Canadian Electrical Code, Part I.
| DevelopmentNote |
French Edition issued on 01-05-2015. (06/2015)
|
| DocumentType |
Standard
|
| Pages |
67
|
| PublisherName |
Canadian Standards Association
|
| Status |
Superseded
|
| SupersededBy |
| C22.1-15 PACKAGE | Consists of C22.1-15, Canadian electrical code, part I (23rd edition), safety standard for electrical installations; C22.1HB-15, Canadian electrical code handbook - an explanation of rules of the Canadian electrical code, part I and the 2015 Electrical quick reference |
| C22.1HB-18 | Canadian Electrical Code Handbook - An Explanation of the Rules of the Canadian Electrical Code, Part I |
| C22.2 NO. 96.2-18 | Flexible power cables for wind turbine applications rated up to 35 kV |
| C22.1-18 | Canadian Electrical Code, Part I (24th Edition), Safety Standard for Electrical Installations |
| CSA C22.2 No. 38 : 2014 | THERMOSET-INSULATED WIRES AND CABLES |
| CSA C22 NO. 4 : 2016 | ENCLOSED AND DEAD-FRONT SWITCHES |
| C22.2 NO. 232-17 | Optical fiber cables |
| C88-16 | Power transformers and reactors |
| CSA C22.2 No. 5 : 2013 | MOLDED-CASE CIRCUIT BREAKERS, MOLDED-CASE SWITCHES AND CIRCUIT-BREAKER ENCLOSURES |
| CSA C22.2 No. 29 : 2015 | PANELBOARDS AND ENCLOSED PANELBOARDS |
| CSA C22.2 No. 273 : 2014(R2019) | CABLEBUS |
| CSA C61400-1 : 2014 | WIND TURBINES - PART 1: DESIGN REQUIREMENTS |
| C22.1-15 | Canadian Electrical Code, Part I (23rd Edition), Safety Standard for Electrical Installations |
| CSA C22.2 No. 49 : 2014 | FLEXIBLE CORDS AND CABLES |
| CSA C22.2 No. 0.4 : 2004(R2013) | BONDING OF ELECTRICAL EQUIPMENT |
| ISO 4413:2010 | Hydraulic fluid power General rules and safety requirements for systems and their components |
| CSA C22.2 No. 123 : 2016 | METAL SHEATHED CABLES |
| IEC 61082-4:1996 | Preparation of documents used in electrotechnology - Part 4: Location and installation documents |
| CSA Z462 : 2015 | WORKPLACE ELECTRICAL SAFETY |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| CSA C22.2 No. 124 : 2016 | MINERAL-INSULATED CABLE |
| CSA C22.2 No. 31 : 2014 | SWITCHGEAR ASSEMBLIES |
| CSA C68.10 : 2014 | SHIELDED POWER CABLE FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS, 5-46 KV |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| CSA C22.2 No. 250.13 : 2017 | LIGHT EMITTING DIODE (LED) EQUIPMENT FOR LIGHTING APPLICATIONS |
| CSA C22.2 No. 107.3 : 2014 | UNINTERRUPTIBLE POWER SYSTEMS |
| IEC 61082-3:1993 | Preparation of documents used in electrotechnology - Part 3: Connection diagrams, tables and lists |
| C22.2 NO. 214-17 | Communications cables (Bi-national standard, with UL 444) |
| CSA C22.2 No. 208 : 2014 | FIRE ALARM AND SIGNAL CABLE |
| IEEE 835-1994 | IEEE Standard Power Cable Ampacity Tables |
| ISO/IEC Guide 51:2014 | Safety aspects Guidelines for their inclusion in standards |
| CSA C22.2 No. 190 : 2014 | CAPACITORS FOR POWER FACTOR CORRECTION |
| CSA Z460 : 2013 | CONTROL OF HAZARDOUS ENERGY - LOCKOUT AND OTHER METHODS |
| CSA C22.2 No. 65 : 2013 | WIRE CONNECTORS |
| CSA C22.2 No. 60529 : 2016 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) |
| CAN/CSA-C22.2 NO. 60947-1-13 (R2018) | Low-voltage switchgear and controlgear - Part 1: General rules (Tri-national standard, with UL 60947-1 and NMX-J-515-ANCE) |
| CSA C22.2 No. 239 : 2017 | CONTROL AND INSTRUMENTATION CABLES |
| CSA C22.2 No. 0.15 : 2015 | ADHESIVE LABELS |
| CSA C22.2 No. 210 : 2015 | APPLIANCE WIRING MATERIAL PRODUCTS |
| CSA C68.3 : 1997 | |
| CSA C22.2 No. 130 : 2016 | REQUIREMENTS FOR ELECTRICAL RESISTANCE TRACE HEATING AND HEATING DEVICE SETS |
| C22.2 NO. 75-17 | Thermoplastic insulated wires and cables (Trinational standard with UL 83 and NMX-J-010-ANCE-2017) |
| CSA C22.2 No. 100 : 2014 | MOTORS AND GENERATORS |
| IEEE 404-2012 | IEEE Standard for Extruded and Laminated Dielectric Shielded Cable Joints Rated 2.5 kV to 500 kV |
| CSA C22.2 No. 2556 : 2015 | WIRE AND CABLE TEST METHODS |
| C22.2 NO. 236-15 | Heating and cooling equipment (Bi-national standard with UL 1995) |
| CSA C22.2 No. 107.1 : 2016 | POWER CONVERSION EQUIPMENT |
| IEC 62061:2005+AMD1:2012+AMD2:2015 CSV | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
| CSA C22.2 No. 14 : 2013 | INDUSTRIAL CONTROL EQUIPMENT |
| CSA C22.2 No. 47 : 2013 | AIR-COOLED TRANSFORMERS (DRY TYPE) |
| CSA C22.2 NO No. 51:14 (R2018) | ARMOURED CABLES |
| C22.2 NO. 126.1-17 | Metal cable tray systems (Binational standard with NEMA VE 1-2017) |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| CSA C22.2 NO. 60947-4-1:14 (R2019) | Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters ( Bi-national standard, with UL 60947-4-1) |
| CSA C22.2 No. 46 : 2013 | ELECTRIC AIR HEATERS |
| CSA C22.2 No. 94.2 : 2015 | ENCLOSURES FOR ELECTRICAL EQUIPMENT, ENVIRONMENTAL CONSIDERATIONS |
| CSA C22.2 No. 113 : 2015 | FANS AND VENTILATORS |
| IEC 61082-2:1993 | Preparation of documents used in electrotechnology - Part 2: Function-oriented diagrams |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.