• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

CSA C22.2 No. 60335-1:2011

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 1: GENERAL REQUIREMENTS
Available format(s)

Hardcopy , PDF

Superseded date

03-07-2020

Language(s)

English, French

Published date

01-01-2016

Preface
NATIONAL DIFFERENCES
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Definitions
4 General requirement
5 General conditions for the tests
6 Classification
7 Marking and instructions
8 Protection against access to LIVE PARTS
9 Starting of motor-operated appliances
10 Power input and current
11 Heating
12 Void
13 Leakage current and electric strength at operating
   temperature
14 Transient overvoltages
15 Moisture resistance
16 Leakage current and electric strength
17 Overload protection of transformers and associated
   circuits
18 Endurance
19 Abnormal operation
20 Stability and mechanical hazards
21 Mechanical strength
22 Construction
23 Internal wiring
24 Components
25 Supply connection and external flexible cords
26 Terminals for external conductors
27 Provision for earthing
28 Screws and connections
29 CLEARANCES, CREEPAGE DISTANCES, and solid insulation
30 Resistance to heat and fire
31 Resistance to rusting
32 Radiation, toxicity, and similar hazards
Annex A (informative) - Routine tests
Annex B (normative) - Appliances powered by rechargeable
        batteries
Annex C (normative) - Ageing test on motors
Annex D (normative) - Thermal motor protectors
Annex E (normative) - Needle-flame test
Annex F (normative) - Capacitors
Annex G (normative) - Safety isolating transformers
Annex H (normative) - Switches
Annex I (normative) - Motors having BASIC INSULATION that is
        inadequate for the RATED VOLTAGE of the appliance
Annex J (normative) - Coated printed circuit boards
Annex K (normative) - Overvoltage categories
Annex L (informative) - Guidance for the measurement of
        clearances and creepage distances
Annex M (normative) - Pollution degree
Annex N (informative) - Proof tracking test
Annex O (informative) - Selection and sequence of the tests
        of clause 30
Annex P (informative) - Guidance for the application of this
        standard to appliances used in warm damp equable
        climates
Annex Q (informative) - Sequence of tests for the evaluation
        of electronic circuits
Annex R (informative) - Software evaluation
Annex DVA (informative) - Component Standards Cross
          Reference
Annex DVB (Normative) - Mexican Standards and Relevant
          Requirements
Annex DVC (Normative) - Mechanical requirements for direct
          plug in appliances
Bibliography
Index of defined words

Pertains to the safety of electrical appliances for household and similar purposes, their RATED VOLTAGE being not more than 250 V for single-phase appliances and 480 V for other appliances.

DevelopmentNote
Also numbered as NMX-J-521/1-ANCE and UL 60335-1. (11/2011)
DocumentType
Standard
Pages
208
ProductNote
Reconfirmed EN
PublisherName
Canadian Standards Association
Status
Superseded
SupersededBy

CISPR 14-1:2016 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
IEC 60112:2003+AMD1:2009 CSV Method for the determination of the proof and the comparative tracking indices of solid insulating materials
UL 340:6ED 2017-07 Standard for Tests for Comparative Flammability of Liquids
CSA E60335.2.29 : 2006 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-29: PARTICULAR REQUIREMENTS FOR BATTERY CHARGERS
IEC 60320-1:2015 Appliance couplers for household and similar general purposes - Part 1: General requirements
CSA C22.2 No. 38 : 2014 THERMOSET-INSULATED WIRES AND CABLES
IEC GUIDE 110:2014 Home control systems - Guidelines relating to safety
CSA E60730.2.9 : 2015 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-9: PARTICULAR REQUIREMENTS FOR TEMPERATURE SENSING CONTROLS
IEC 60238:2016+AMD1:2017 CSV Edison screw lampholders
IEC 60738-1:2006+AMD1:2009 CSV Thermistors - Directly heated positive temperature coefficient -Part 1: Generic specification
UL 514A:11ED 2013-02 Metallic Outlet Boxes
CSA C22.2 No. 223 : 2015 POWER SUPPLIES WITH EXTRA-LOW-VOLTAGE CLASS 2 OUTPUTS
IEC 60384-14:2013+AMD1:2016 CSV Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
UL 50:13ED 2015-10 Enclosures for Electrical Equipment, Non-Environmental Considerations
CSA C22.2 No. 5 : 2013 MOLDED-CASE CIRCUIT BREAKERS, MOLDED-CASE SWITCHES AND CIRCUIT-BREAKER ENCLOSURES
CSA C22.2 No. 1 : 2004 AUDIO, VIDEO AND SIMILAR ELECTRONIC EQUIPMENT
IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
IEC 60730-2-10:2006 Automatic electrical controls for household and similar use - Part 2-10: Particular requirements for motor-starting relays
IEC 60950:1999 Safety of information technology equipment
CSA C22.2 No. 49 : 2014 FLEXIBLE CORDS AND CABLES
IEC 60695-4:2012 Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical products
UL 1863:4ED 2004-05 Standard for Communications-Circuit Accessories
CSA C22.2 No. 77 : 2014 MOTORS WITH INHERENT OVERHEATING PROTECTION
IEC 61000-4-11:2004+AMD1:2017 CSV Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
UL 1097:6ED 2012-02 Double Insulation Systems for Use in Electrical Equipment
UL 248-8:3ED 2011-05 Low-Voltage Fuses - Part 8: Class J Fuses
IEC TR 60083:2015 Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC
CSA C22.2 No. 21 : 2014 CORD SETS AND POWER-SUPPLY CORDS
UL 900:8ED 2015-04 Air Filter Units
UL 1283:7ED 2017-05 Electromagnetic Interference Filters
CISPR 14-2:2015 RLV Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard
ISO/IEC Guide 14:2003 Purchase information on goods and services intended for consumers
CSA C22.2 No. 96 : 2013 PORTABLE POWER CABLES
IEC 62151:2000 Safety of equipment electrically connected to a telecommunication network
CSA C22.2 No. 24 : 2015 TEMPERATURE-INDICATING AND -REGULATING EQUIPMENT
UL 83:16ED 2017-07 Standard for Thermoplastic-Insulated Wires and Cables
IEC 60320-2-3:1998+AMD1:2004 CSV Appliance couplers for household and similar general purposes - Part 2-3: Appliance couplers with a degree of protection higher than IPX0
IEC 61000-4-4:2012 RLV Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
CSA C22.2 No. 144 : 1991 GROUND FAULT CIRCUIT INTERRUPTERS
ISO 1463:2003 Metallic and oxide coatings Measurement of coating thickness Microscopical method
IEC 60695-2-11:2014 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT)
UL 943:5ED 2016-05 Ground-Fault Circuit-Interrupters
UL 917:5ED 2006-11 Standard for Clock-Operated Switches
IEC 61558-2-6:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers
C22.2 NO. 43-17 Lampholders (Binational standard with UL 496)
IEC 60695-2-13:2010+AMD1:2014 CSV Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials
UL 60730-2-9:4ED 2017-02 Automatic Electrical Controls - Part 2-9: Particular Requirements for Temperature Sensing Controls
IEC 61000-4-6 : 4.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
IEC 60999-1:1999 Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included)
IEC 61000-4-6:2013 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
UL 514C:4ED 2014-04 Nonmetallic Outlet Boxes, Flush-Device Boxes, and Covers
IEC 60085:2007 Electrical insulation - Thermal evaluation and designation
CSA E730.2.7 : 1994 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR TIMERS AND TIME SWITCHES
CSA C22.2 No. 210.2 : 2001 APPLIANCE WIRING MATERIAL PRODUCTS
IEC 60721-2-1:2013 Classification of environmental conditions - Part 2-1: Environmental conditions appearing in nature - Temperature and humidity
IEC 61180-2:1994 High-voltage test techniques for low-voltage equipment - Part 2: Test equipment
IEC 60320-2-2:1998 Appliance couplers for household and similar general purposes - Part 2-2: Interconnection couplers for household and similar equipment
ISO/IEC Guide 51:2014 Safety aspects Guidelines for their inclusion in standards
IEC 61558-1:2017 Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests
UL 248-3:2ED 2000-08 Low-Voltage Fuses - Part 3: Class CA and CB Fuses
ISO/IEC Guide 50:2014 Safety aspects — Guidelines for child safety in standards and other specifications
IEC 60695-2-12:2010+AMD1:2014 CSV Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods- Glow-wire flammability index (GWFI) test method for materials
CSA C22.2 No. 65 : 2013 WIRE CONNECTORS
UL 248-12:3ED 2011-05 Low-Voltage Fuses - Part 12: Class R Fuses
UL 248-11:3ED 2011-05 Low-Voltage Fuses - Part 11: Plug Fuses
IEC 60998-2-2:2002 Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units
ISO/IEC Guide 37:2012 Instructions for use of products by consumers
IEC 61643-1:2005 Low-voltage surge protective devices - Part 1: Surge protective devices connected to low-voltage power distribution systems - Requirements and tests
CSA E60730.1 : 2015 Automatic electrical controls for household and similar use — Part 1: General requirements
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
UL 248-4:2ED 2000-08 Low-Voltage Fuses - Part 4: Class CC Fuses
IEC 60730-2-8:2000+AMD1:2002+AMD2:2015 CSV Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated watervalves, including mechanical requirements
ISO 9772:2012 Cellular plastics Determination of horizontal burning characteristics of small specimens subjected to a small flame
IEC 61058-1:2016 Switches for appliances - Part 1: General requirements
IEC 60691:2015 Thermal-links - Requirements and application guide
IEC GUIDE 104:2010 The preparation of safety publications and the use of basic safety publications and group safety publications
CSA C22.2 No. 0.15 : 2015 ADHESIVE LABELS
IEC 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
C22.2 NO. 8-13 (R2018) Electromagnetic interference (EMI) filters
IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
IEC 60695-11-10:2013 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
UL 248-10:3ED 2011-05 Low-Voltage Fuses - Part 10: Class L Fuses
CSA E730.2.4 : 1994 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PARTICULAR REQUIREMENTS FOR THERMAL MOTOR PROTECTORS FOR MOTOR COMPRESSORS OF HERMETIC AND SEMI HERMETIC TYPE
IEC 60598-1:2014+AMD1:2017 CSV Luminaires - Part 1: General requirements and tests
UL 248-9:2ED 2000-08 Standard for Low-Voltage Fuses - Part 9: Class K Fuses
IEC 60061-1:2005 CSV Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
IEC 60906-1:2009 IEC system of plugs and socket-outlets for household and similar purposes - Part 1: Plugs and socket-outlets 16 A 250 V a.c.
CSA C22.2 No. 127 : 2015 EQUIPMENT AND LEAD WIRES
IEC 61000-3-3:2013 RLV Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
IEC 60034-1:2017 Rotating electrical machines - Part 1: Rating and performance
ISO 2178:2016 Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method
IEC 60335-2-29:2016 Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers
CSA C22.2 No. 182.3 : 2016 SPECIAL USE ATTACHMENT PLUGS, RECEPTACLES, AND CONNECTORS
C22.2 NO. 75-17 Thermoplastic insulated wires and cables (Trinational standard with UL 83 and NMX-J-010-ANCE-2017)
ISO/IEC Guide 71:2014 Guide for addressing accessibility in standards
IEC 60252-1:2010+AMD1:2013 CSV AC motor capacitors - Part 1: General - Performance, testing andrating - Safety requirements - Guidance for installation and operation
CSA C22.2 No. 100 : 2014 MOTORS AND GENERATORS
UL 746A:6ED 2012-09 Polymeric Materials - Short Term Property Evaluations
UL 248-1 : 3 LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS
IEC 61000-3-3 : 3.0EN+(REDLINE+VERSION) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION
IEC 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
IEC 60664-3:2016 Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
UL 248-2:2ED 2000-08 Low-Voltage Fuses - Part 2: Class C Fuses
CSA C22.2 NO. 85:14 (R2018) Rigid PVC boxes and fittings
CISPR 11:2015 RLV Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
CSA C22.2 No. 226 : 1992 PROTECTORS IN TELECOMMUNICATION NETWORKS
IEC 60695-10-2:2014 Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method
IEC 61180-1:1992 High-voltage test techniques for low voltage equipment - Part 1: Definitions, test and procedure requirements
ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
UL 1577:5ED 2014-04 Optical Isolators
IEC 61770:2008+AMD1:2015 CSV Electric appliances connected to the water mains - Avoidance ofbacksiphonage and failure of hose-sets
CSA C22.2 No. 14 : 2013 INDUSTRIAL CONTROL EQUIPMENT
CSA C22.2 No. 55 : 2015 SPECIAL USE SWITCHES
CSA C22.2 No. 177 : 2013 CLOCK-OPERATED SWITCHES
IEC 61032:1997 Protection of persons and equipment by enclosures - Probes for verification
C22.2 NO. 182.1-17 Plugs, receptacles, and cable connectors of the pin and sleeve type (Trinational standard with NMX-J-719-ANCE and UL 1682)
IEC 60695-11-5 : 2.0 FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
IEC 60695-11-5:2016 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
UL 496:14ED 2017-09 Lampholders
IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
IEC 60998-2-1:2002 Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units
IEC 61000-4-13:2002+AMD1:2009+AMD2:2015 CSV Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics includingmains signalling at a.c. power port, low frequency immunity tests
IEC 60990:2016 Methods of measurement of touch current and protective conductor current
UL 248-5:2ED 2000-08 Standard for Low-Voltage Fuses - Part 5: Class G Fuses
CSA C22.2 No. 113 : 2015 FANS AND VENTILATORS
IEC 61000-3-2 : 4.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE)
IEC 60730-1:2013+AMD1:2015 CSV Automatic electrical controls - Part 1: General requirements

View more information

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.