• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

CAN/CSA-C22.2 NO. 60950-22:17

Current
Current

The latest, up-to-date edition.

Information technology equipment - Safety - Part 22: Equipment to be installed outdoors (Binational standard with UL 60950-22)
Available format(s)

Hardcopy , PDF , Hardcopy, PDF

Language(s)

French, English

Published date

01-01-2017

PREFACE
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Conditions for outdoor equipment
5 Marking and instructions
6 Protection from electrical shock in an outdoor location
7 Wiring terminals for connection of external conductors
8 Construction requirements for outdoor enclosures
9 Protection of equipment within an outdoor enclosure
10 Mechanical strength of enclosures
11 Outdoor equipment containing valve regulated or
   vented batteries
Annex A (normative) - Water-saturated sulphur dioxide
        atmosphere
Annex B (normative) - Water spray test
Annex C (normative) - Ultraviolet light conditioning test
Annex D (normative) - Gasket tests
Annex E (informative) - Rationale
Annex NAE (informative) - U.S. and Canadian regulatory
          requirements
Bibliography

This part of IEC 60950 applies to information technology equipment intended to be installed in an OUTDOOR LOCATION.

Preface This is the harmonized CSA and UL Standard for Information Technology Equipment - Safety - Part 22: Equipment to be Installed Outdoors. It is the second edition of CAN/CSA-C22.2 No. 60950-22 and the second edition of UL 60950-22. This edition of CAN/CSA-C22.2 No. 60950-22 supersedes the previous edition published on April 23, 2007. This edition of UL 60950-22 supersedes the previous edition published on April 23, 2007. This harmonized standard is based on IEC Publication 60950-22: second edition, Information Technology Equipment - Safety - Part 22: Equipment to be Installed Outdoors, issued January 2016. IEC 60950-22 is copyrighted by the IEC. Scope 1.1 Equipment covered This part of IEC 60950 applies to information technology equipment intended to be installed in an OUTDOOR LOCATION. The requirements for OUTDOOR EQUIPMENT also apply, where relevant, to OUTDOOR ENCLOSURES suitable for direct installation in the field and supplied for housing information technology equipment to be installed in an OUTDOOR LOCATION. 1.2 Additional requirements Each installation may have particular requirements. Some examples are given in 4.2. In addition, requirements for protection of the OUTDOOR EQUIPMENT against the effects of direct lightning strikes are not covered by the standard. For information on this subject, see IEC 62305-1 NFPA 780 or CAN/CSA-B72.

DevelopmentNote
Jointly published by CSA and UL. Also numbered as UL 60950-22. (04/2017)
DocumentType
Standard
ISBN
978-1-4883-0706-5
Pages
53
PublisherName
Canadian Standards Association
Status
Current
Supersedes

Standards Relationship
IEC 60950-22:2016 Identical

CSA C22.2 No. 62368-1 : 2014 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS

CSA C22.2 No. 94.1 : 2015 ENCLOSURES FOR ELECTRICAL EQUIPMENT, NON-ENVIRONMENTAL CONSIDERATIONS
ISO 4892-1:2016 Plastics Methods of exposure to laboratory light sources Part 1: General guidance
IEC 60364-4-43:2008 Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent
UL 50:13ED 2015-10 Enclosures for Electrical Equipment, Non-Environmental Considerations
C22.1-15 Canadian Electrical Code, Part I (23rd Edition), Safety Standard for Electrical Installations
NFPA 780 : 2017 INSTALLATION OF LIGHTNING PROTECTION SYSTEMS
IEC 61587-1:2016 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation
IEC 60896-21:2004 Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test
IEC 60364-5-53:2001+AMD1:2002+AMD2:2015 CSV Electrical installations of buildings - Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control
IEC 60068-2-11:1981 Basic environmental testing procedures - Part 2-11: Tests - Test Ka: Salt mist
CSA C22.2 No. 144 : 1991 GROUND FAULT CIRCUIT INTERRUPTERS
ISO 8256:2004 Plastics — Determination of tensile-impact strength
UL 943:5ED 2016-05 Ground-Fault Circuit-Interrupters
ISO 14993:2001 Corrosion of metals and alloys Accelerated testing involving cyclic exposure to salt mist, "dry" and "wet" conditions
ISO 4628-3:2016 Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 3: Assessment of degree of rusting
ISO 21207:2015 Corrosion tests in artificial atmospheres — Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying
ISO 180:2000 Plastics Determination of Izod impact strength
IEEE C2-2017 NATIONAL ELECTRICAL SAFETY CODE (NESC)(R)
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
IEC 60896-22:2004 Stationary lead-acid batteries - Part 22: Valve regulated types - Requirements
ISO/TS 18173:2005 Non-destructive testing General terms and definitions
NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
CSA C22.2 No. 62368-1 : 2014 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
IEC 61643-11:2011 Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods
IEC 61969-3:2011 Mechanical structures for electronic equipment - Outdoor enclosures - Part 3: Environmental requirements, tests and safety aspects
ISO 4892-4:2013 Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps
IEC 61439-5:2014 Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks
ISO 4892-2:2013 Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
ISO 178:2010 Plastics Determination of flexural properties
ASTM D 471 : 2016-02 TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS
IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
IEC 62485-2:2010 Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries
CSA C22.2 No. 94.2 : 2015 ENCLOSURES FOR ELECTRICAL EQUIPMENT, ENVIRONMENTAL CONSIDERATIONS
ISO 3231:1993 Paints and varnishes — Determination of resistance to humid atmospheres containing sulfur dioxide

View more information
£187.21
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.