Reaction to fire tests. Spread of flame Guidance on flame spread

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

31-05-2007

Publisher

British Standards Institution

Foreword
Introduction
1 Scope
2 Principles of flame spread
3 Characteristics of flame-spread modes
  3.1 General
  3.2 Horizontal, facing upward
  3.3 Vertical or inclined
  3.4 Horizontal, facing downward
4 History of surface spread of flame tests
5 Small-scale tests
  5.1 Method given in ISO 5658-2
  5.2 LIFT method
  5.3 Method given in ISO 9239-1
  5.4 Method given in ISO 9239-2
6 Intermediate-scale tests
  6.1 Corner tests
  6.2 Method given in ISO 5658-4
  6.3 Method given in ISO/TR 14696:1999
7 Large-scale tests
  7.1 Room corner test (ISO 9705)
  7.2 Room/corridor scenarios
  7.3 Fagade scenarios
  7.4 Large-scale vertical flame-spread tests
8 Flame spread within assemblies
9 Flame spread by flaming droplets/particles
  9.1 Description of flame spread process with
      flaming droplets/particles
  9.2 Test methods to characterise flaming
      droplets/particles
  9.3 Typical fire scenarios involving flaming
      droplets/particles
Bibliography

Offers guidance on flame spread tests. It specifies the principles of flame spread and classifies different flame-spread mechanisms.

This Technical Specification provides guidance on flame spread tests. It describes the principles of flame spread and classifies different flame-spread mechanisms.

Committee	FSH/21/-/3
DevelopmentNote	Supersedes BS ISO TR 5658-1. (03/2010)
DocumentType	Standard
Pages	38
PublisherName	British Standards Institution
Status	Current
Supersedes	BS ISO TR 5658-1:1997

Standards	Relationship
ISO/TS 5658-1:2006	Identical

IEC 60695-11-20:2015	Fire hazard testing - Part 11-20: Test flames - 500 W flame test method
NEN 3883 : 1975
NFP 92 505 : 1995	SAFETY AGAINST FIRE - BUILDING MATERIALS - REACTION TO FIRE TESTS - TEST USED FOR THERMAL MELTING MATERIALS - DRIPPING TEST
ISO 5660-1:2015	Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
ISO 5658-2:2006	Reaction to fire tests Spread of flame Part 2: Lateral spread on building and transport products in vertical configuration
ISO 9705:1993	Fire tests Full-scale room test for surface products
ISO 12468-1:2013	External exposure of roofs to fire Part 1: Test method
ISO 5657:1997	Reaction to fire tests Ignitability of building products using a radiant heat source
ISO 12992:2017	Plastics — Vertical flame spread determination for film and sheet
DIN 4102-16:2015-09	Fire behaviour of building materials and building components - Part 16: "Brandschacht" tests
ISO 11925-2:2010	Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test
ISO 5658-4:2001	Reaction to fire tests — Spread of flame — Part 4: Intermediate-scale test of vertical spread of flame with vertically oriented specimen
ASTM E 108 : 2017 : REDLINE	Standard Test Methods for Fire Tests of Roof Coverings
ISO/TR 14696:1999	Reaction to fire tests Determination of fire parameters of materials, products and assemblies using an intermediate-scale heat release calorimeter (ICAL)
ISO/TR 3814:1989	Tests for measuring "reaction-to-fire" of building materials — Their development and application
EN 13823:2010+A1:2014	REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM
ISO/TR 9705-2:2001	Reaction-to-fire tests Full-scale room tests for surface products Part 2: Technical background and guidance
DIN 4102-15:1990-05	FIRE BEHAVIOUR OF BUILDING MATERIALS AND BUILDING COMPONENTS - 'BRANDSCHACHT'
ISO/TR 11696-1:1999	Uses of reaction to fire test results Part 1: Application of test results to predict fire performance of internal linings and other building products
ISO 9772:2012	Cellular plastics Determination of horizontal burning characteristics of small specimens subjected to a small flame
IEC 60695-11-10:2013	Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
ISO 9239-2:2002	Reaction to fire tests for floorings — Part 2: Determination of flame spread at a heat flux level of 25 kW/m2
UNI 9174 : 2010	REACTION TO FIRE OF PRODUCTS WHICH CAN BE HIT BY FLAME WITH RADIANT HEATING
ISO 9239-1:2010	Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source
ISO/TR 11696-2:1999	Uses of reaction to fire test results Part 2: Fire hazard assessment of construction products
ASTM E 162 : 2016 : REDLINE	Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
NFP 92 506 : 1985	SAFETY AGAINST FIRE - BUILDING MATERIALS - REACTION TO FIRE TESTS - RADIANT PANEL TEST FOR FLOORING

View more information

£232.00

Excluding VAT

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

DD ISO/TS 5658-1:2006

Reaction to fire tests. Spread of flame Guidance on flame spread

Table of Contents

Abstract

Scope

General Product Information

International Equivalents

Standards Referencing This Book

Category

Subcategory