DEFSTAN 02-309/3(2007) : 2007
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
05-10-2007
Foreword
1 Scope
2 Warning
3 Normative References
4 Definitions
5 Abbreviations
6 Performance Specification
6.1 Safety
6.2 Gas Turbines
6.3 Gas Turbine Performance
6.4 Gas Turbine Alternator Performance
6.5 Information Required from the Manufacturer
6.6 Installation
6.7 Testing
6.8 Commercial Support Issues
7 National/International Regulations
7.1 Relevant Standards
8 Requirements
8.1 Relevant Standards
9 Design Requirements/Guidance
9.1 Definitions
9.2 Design Requirements
9.3 Auxiliaries and System Interfaces
9.4 Environmental Conditions and Considerations
9.5 Safety
9.6 Fire Prevention
9.7 Testing and Trials
9.8 Installation
9.9 Painting and Preservation
9.10 Maintenance Check
9.11 Support Issues
9.12 Integrated Logistic Support
10 Corporate Knowledge and Experience
10.1 Background
10.2 Technical Issues
10.3 Component Issues
10.4 Support Issues
10.5 Control Systems
Annex A - Normative References
Annex B - Definitions
Annex C - Abbreviations
Annex D - Shock, Blast and Mounting Requirements
D.1 General
D.2 Blast Capability
D.3 Gas Turbine Alternator Requirements
D.4 Mounts
Annex E - Tests and Trial
E.1 Type Testing
E.2 Production Tests
E.3 Shipboard Trials
Annex F - Conditional Assessment
Annex G - Installation Requirements
G.1 Labels and Markings
G.2 Thermal Insulation
G.3 Installation
Annex H - Painting and Preservation
H.1 General
Annex I - Information Required From The Gas Turbine
Manufacturer
I.1 Evaluation
I.2 Engineering Description
I.3 Performance Curves
I.4 Planned Life and Overhaul Life
I.5 Combustion and Fuel Systems
I.6 Lubricating Oil Systems
I.7 Power Turbine Journal and Thrust Bearings - where
applicable
I.8 Start System
I.9 Gas Generator Performance
I.10 Air Systems
I.11 Materials and Painting
I.12 Shock and Blast
I.13 Compressor Cleaning
I.14 Control and Surveillance
I.15 Weights
I.16 Centre of Gravity
I.17 Heat Emission
I.18 Alignment
I.19 Enclosure
I.20 Vibration
I.21 Noise
I.22 Pollution
I.23 Handbooks
I.24 Models, Mock-ups and Photographs
Annex J - Integrated Logistic Support
J.1 Availability Reliability and Maintainability
J.2 Failure Modes Effects and Critical Analysis
J.3 Maintenance Planning
J.4 Supply Support
J.5 Human Factors Integration
J.6 Training and Training Equipment
J.7 Technical Documentation
J.8 Configuration Management
Specifies the general requirements for, and gives guidance on the procurement of Gas Turbines for installation in HM Surface Ships as either propulsion prime movers or for use with suitably rated alternators.
| DevelopmentNote |
Supersedes DEFSTAN 02-309/2(2002). (11/2007) This standard is obsolescent because it is no longer required for the procurement of new equipment but is retained for maintenance purposes in support of existing in-service equipment. (02/2014)
|
| DocumentType |
Standard
|
| Pages |
66
|
| PublisherName |
UK Ministry of Defence Standards
|
| Status |
Current
|
| Supersedes |
| DEFSTAN 02-305/3(2010) : 2010 | REQUIREMENTS FOR GEARING - MAIN PROPULSION |
| DEFSTAN 02-728/3(2010) : 2010 | REQUIREMENTS FOR DOMESTIC HOT AND COLD FRESH WATER SYSTEMS |
| DEFSTAN 00-25(PT15)/1(2004) : 2004 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 15: PRINCIPLES AND PROCESS |
| DEFSTAN 02-362/1(2000) : 2000 | TYPE AND PRODUCTION TESTING OF MECHANICAL EQUIPMENT |
| BS EN ISO 12100-2 : 2003 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES |
| DEFSTAN 02-632/2(2004) : 2004 | REQUIREMENTS FOR AC AND DC MOTORS |
| DEFSTAN 59-411(PT5)/1(2007) : 2007 | ELECTROMAGNETIC COMPATIBILITY - PART 5: CODE OF PRACTICE FOR TRI-SERVICE DESIGN AND INSTALLATION |
| DEFSTAN 00-40(PT1)/5(2003) : 2003 | RELIABILITY AND MAINTAINABILITY (R&M) - PART 1: MANAGEMENT RESPONSIBILITIES AND REQUIREMENTS FOR PROGRAMMES AND PLANS |
| DEFSTAN 00-25(PT18)/1(2004) : 2004 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 18: TRAINING DOMAIN |
| BS EN ISO 9001:2015 | Quality management systems. Requirements |
| DEFSTAN 02-599/1(2000) : 2000 | POLICY REQUIREMENTS AND DESIGN GUIDANCE FOR ALARM AND WARNING SYSTEMS CATEGORY N/A |
| DEFSTAN 08-123/1(2000) : 2000 | REQUIREMENTS FOR THE DESIGN AND TESTING OF EQUIPMENTS TO MEET ENVIRONMENTAL CONDITIONS - CATEGORY 2 |
| DEFSTAN 08-160/1(2003) : 2003 | REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - CATEGORY 2 |
| DEFSTAN 00-25(PT21)/1(2004) : 2004 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 21: SYSTEM SAFETY DOMAIN |
| DEFSTAN 08-109/2(2001) : 2001 | REQUIREMENTS FOR THE DESIGN OF ELECTRICAL SUPPLY AND DISTRIBUTION SYSTEMS IN SURFACE SHIPS AND SUBMARINES - CATEGORY 1 |
| DEFSTAN 00-45(PT3)/1(2006) : 2006 | USING RELIABILITY CENTRED MAINTENANCE TO MANAGE ENGINEERING FAILURES - PART 3: GUIDANCE ON THE APPLICATION OF RELIABILITY CENTRED MAINTENANCE |
| DEFSTAN 00-45(PT2)/2(2008) : 2008 | USING RELIABILITY CENTRED MAINTENANCE TO MANAGE ENGINEERING FAILURES - PART 2: DEVELOPING AN RCM PROJECT PLAN |
| DEFSTAN 00-60(PT20)/7(2004) : 2004 | INTEGRATED LOGISTIC SUPPORT - PART 20: APPLICATION OF INTEGRATED SUPPLY SUPPORT PROCEDURES |
| DEFSTAN 00-56(PT2)/4(2007) : 2007 | SAFETY MANAGEMENT REQUIREMENTS FOR DEFENCE SYSTEMS - PART 2: GUIDANCE ON ESTABLISHING A MEANS OF COMPLYING WITH PART 1 |
| DEFSTAN 61-5(PT4)/4(2006) : 2006 | LOW VOLTAGE ELECTRICAL POWER SUPPLY SYSTEMS - QUALITY OF ELECTRICAL POWER SYSTEMS IN HM SHIPS |
| DEFSTAN 05-34/2(1984) : 1984 | MARKING OF SERVICE MATERIAL |
| DEFSTAN 02-604/2(2004) : 2004 | ELECTRICAL INDICATING INSTRUMENTS |
| DEFSTAN 59-411(PT4)/1(2007) : 2007 | ELECTROMAGNETIC COMPATIBILITY - PART 4: PLATFORM AND SYSTEM TEST AND TRIALS |
| DEFSTAN 02-723/1(2000) : 2000 | REQUIREMENTS FOR MARKER PLATES |
| DEFSTAN 08-142/3(2006) : 2006 | REQUIREMENTS FOR MAIN 60 HZ GENERATORS |
| DEFSTAN 02-320/2(2002) : INTERIM | REQUIREMENTS FOR THE DESIGN AND INSTALLATION OF FUEL SYSTEMS FOR GAS TURBINE ENGINES AND DIESEL ENGINES IN HM SURFACE SHIPS AND SUBMARINES |
| DEFSTAN 08-120/1(2000) : 2000 | REQUIREMENTS FOR DETERMINING THE SHOCK STRENGTH OF EQUIPMENT - CATEGORY 2 |
| DEFSTAN 07-224/1(2000) : 2000 | REQUIREMENTS FOR MATERIALS FOR ELECTROTECHNICAL AND NAVAL WEAPONS EQUIPMENT - CATEGORY 2 |
| DEFSTAN 01-5/15(2007) : 2007 | FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS |
| DEFSTAN 08-118(PT1)/1(2000) : 2000 | DESIGN GUIDE ON THE REDUCTION OF ACOUSTIC NOISE IN SURFACE SHIPS - CATEGORY 3 - PART 1: REDUCTION OF NOISE RADIATED UNDERWATER |
| BS EN 61032:1998 | Protection of persons and equipment by enclosures. Probes for verification |
| DEFSTAN 68-10/5(2003) : 2003 | CORROSION PREVENTIVE: WATER DISPLACING NATO CODE: C-634 JOINT SERVICE DESIGNATION: PX-24 |
| DEFSTAN 00-60(PT0)/6(2004) : 2004 | INTEGRATED LOGISTIC SUPPORT - PART 0: APPLICATION OF INTEGRATED LOGISTIC SUPPORT (ILS) |
| BS 6861-2:1997 | Mechanical vibration. Balance quality requirements of rigid rotors Balance errors |
| DEFSTAN 00-25(PT19)/1(2004) : 2004 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 19: HUMAN ENGINEERING DOMAIN |
| DEFSTAN 05-10(PT2)/5(2006) : 2006 | PRODUCT DEFINITION INFORMATION - PART 2: DIGITAL PRODUCT DEFINITION INFORMATION |
| DEFSTAN 08-107/2(2001) : 2001 | GENERAL REQUIREMENTS FOR THE DESIGN OF ELECTROMECHANICAL AND NAVAL WEAPON EQUIPMENT - CATEGORY 2 |
| DEFSTAN 05-10(PT1)/5(2006) : 2006 | PRODUCT DEFINITION INFORMATION - PART 1: HARDCOPY/MICROFORM PRODUCT DEFINITION INFORMATION |
| DEFSTAN 00-45(PT1)/2(2008) : 2008 | USING RELIABILITY CENTRED MAINTENANCE TO MANAGE ENGINEERING FAILURES - PART 1: REQUIREMENTS FOR THE APPLICATION OF RELIABILITY CENTRED MAINTENANCE |
| DEFSTAN 00-25(PT20)/1(2004) : 2004 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 20: HEALTH HAZARD ASSESSMENT DOMAIN |
| BS ISO 8217:2017 | Petroleum products. Fuels (class F). Specifications of marine fuels |
| DEFSTAN 02-587(PT1)/2(2001) : INTERIM | REQUIREMENTS FOR LIGHTING SYSTEMS - PART 1: SURFACE SHIPS CATEGORY 3 |
| DEFSTAN 05-10(PT0)/5(2006) : 2006 | PRODUCT DEFINITION INFORMATION - PART 0: GENERAL INTRODUCTION TO PRODUCT DEFINITION INFORMATION |
| BS EN ISO 12100-1 : 2003 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY |
| DEFSTAN 02-607/2(2008) : 2008 | DESIGN OF HIGH VOLTAGE ELECTRICAL POWER SYSTEMS FOR HM SHIPS, SUBMARINES AND THE ROYAL FLEET AUXILIARY |
| DEFSTAN 02-54/1(2000) : 2000 | SUPPLY OF INFORMATION TO DETERMINE, THE SHIP-FIT OF EQUIPMENT AND THE IDENTIFICATION OF PARTS AND SPARES |
| DEFSTAN 59-411(PT3)/1(2007) : 2007 | ELECTROMAGNETIC COMPATIBILITY - PART 3: TEST METHODS AND LIMITS FOR EQUIPMENT AND SUB SYSTEMS |
| DEFSTAN 02-703/1(2000) : 2000 | THERMAL AND ACOUSTIC INSULATION OF HULL AND MACHINERY |
| DEFSTAN 00-60(PT10)/5(2002) : 2002 | INTEGRATED LOGISTIC SUPPORT - PART 10: ELECTRONIC DOCUMENTATION |
| DEFSTAN 02-512(PT1)/2(2002) : 2002 | GUIDE TO CABLES, ELECTRICAL AND ASSOCIATED ITEMS - PART 1: GENERAL |
| BS ISO 11342:1998 | Mechanical vibration. Methods and criteria for the mechanical balancing of flexible rotors |
| DEFSTAN 02-345/1(2000) : 2000 AMD 1 2002 | REQUIREMENTS FOR FLEXIBLE RUBBER PIPE ASSEMBLIES AND BELLOWS FOR USE IN SYSTEMS FROM VACUUM TO 10 BAR |
| DEFSTAN 02-353/2(2006) : 2006 | EXAMINATION OF MACHINERY IN HM SURFACE SHIPS ON COMPLETION OF CONTRACTORS SEA TRIALS |
| DEFSTAN 00-25(PT17)/1(2004) : 2004 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 17: PERSONNEL DOMAIN |
| DEFSTAN 02-626/1(2000) : 2000 | CONTROL AND SURVEILLANCE EQUIPMENT FOR PLANT AND SYSTEM INSTALLATIONS CATEGORY 2 |
| DEFSTAN 05-10(PT3)/5(2006) : 2006 | PRODUCT DEFINITION INFORMATION - PART 3: PRODUCT DEFINITION INFORMATION GUIDANCE |
| DEFSTAN 61-12(PT31)/2(2006) : 2006 | WIRES, CORDS AND CABLES, ELECTRICAL - METRIC UNITS - PART 31: SHEATHS - LIMITED FIRE HAZARD |
| DEFSTAN 00-25(PT25)/1(2004) : 2004 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 25:SUPPORTING INFORMATION |
| DEFSTAN 02-41/2(2000) : 2000 AMD 1 2004 | REQUIREMENTS FOR CONFIGURATION MANAGEMENT OF SURFACE WARSHIPS |
| DEFSTAN 91-4/7(2004) : 2004 | FUEL, NAVAL, DISTILLATE NATO CODE: F-76 JOINT SERVICE DESIGNATION: DIESO F76 |
| DEFSTAN 08-103(PT2)/1(2000) : 2000 | REQUIREMENTS FOR MAINTENANCE ENVELOPES AND REMOVAL ROUTES - CATEGORY 2 - PART 2: REQUIREMENTS FOR SUBMARINES |
| DEFSTAN 08-162/1(2003) : 2003 | LUBRICATING OIL SYSTEMS FOR PROPULSION AND GENERATION IN HM SURFACE SHIPS AND SUBMARINES - CATEGORY 2 |
| DEFSTAN 59-411(PT2)/1(2007) : 2007 | ELECTROMAGNETIC COMPATIBILITY - PART 2: THE ELECTRIC, MAGNETIC AND ELECTROMAGNETIC ENVIRONMENT |
| DEFSTAN 08-132/2(2006) : 2006 | REQUIREMENTS FOR HAZARDS STATEBOARDS IN SURFACE SHIPS |
| DEFSTAN 00-25(PT16)/1(2004) : 2004 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 16: INTRODUCTION AND MANPOWER DOMAIN |
| DEFSTAN 05-57/5(2005) : 2005 | CONFIGURATION MANAGEMENT OF DEFENCE MATERIEL |
| DEFSTAN 07-256/1(2000) : 2000 | REQUIREMENTS FOR STRUCTURE BORNE VIBRATION AND AIRBORNE NOISE TESTING OF WARSHIP EQUIPMENT - CATEGORY 2 |
| DEFSTAN 02-627/1(2000) : 2000 | REQUIREMENTS FOR GENERAL APPLICATION TO ROTATING ELECTRICAL MACHINERY CATEGORY 2 |
| DEFSTAN 02-628/1(2000) : 2000 | REQUIREMENTS FOR PREPARATION OF DRAWINGS FOR ROTATING ELECTRICAL MACHINERY CATEGORY 3 |
| DEFSTAN 07-218/1(2000) : 2000 | REQUIREMENTS FOR GAS TURBINE INTAKES AND UPTAKES - CATEGORY 2 |
| DEFSTAN 21-8/1(2000) : 2000 | SAFETY REQUIREMENTS FOR THE DESIGN OF ELECTROTECHNICAL AND NAVAL WEAPON EQUIPMENT CATEGORY 2 |
| DEFSTAN 00-56(PT1)/4(2007) : 2007 | SAFETY MANAGEMENT REQUIREMENTS FOR DEFENCE SYSTEMS - PART 1: REQUIREMENTS |
| BS EN 953 : 1998 | SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS |
| DEFSTAN 59-411(PT1)/1(2007) : 2007 | ELECTROMAGNETIC COMPATIBILITY - PART 1: MANAGEMENT AND PLANNING |
| DEFSTAN 02-724/1(2000) : 2000 | PACKAGING |
| DEFSTAN 02-302(PT1)/1(2000) : 2000 | REQUIREMENTS FOR MAINTENANCE ENVELOPES AND REMOVAL ROUTES - PART 1: SURFACE SHIPS CATEGORY 2 |
| BS ISO 11042-1:1996 | Gas turbines. Exhaust gas emission Measurement and evaluation |
| BS EN 10204:2004 | Metallic products. Types of inspection documents |
| DEFSTAN 02-512(PT3)/2(2003) : 2003 AMD 1 2003 | GUIDE TO CABLES, ELECTRICAL AND ASSOCIATED ITEMS - PART 3: CABLES, ELECTRICAL, ETHYLENE PROPYLENE RUBBER INSULATED AND HALOGEN FREE RUBBER INSULATED, LIMITED FIRE HAZARD OR CHLOROSULPHONATED POLYETHYLENE SHEATHED FOR GENERAL SERVICE |
| DEFSTAN 07-243/1(2000) : 2000 | REQUIREMENTS FOR MAIN DC GENERATORS - CATEGORY 2 |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.