DESIGN REQUIREMENTS FOR WEAPONS AND ASSOCIATED SYSTEMS - PART 1: MANDATORY DESIGN REQUIREMENTS

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

28-11-2017

Publisher

UK Ministry of Defence Standards

FORWARD
INTRODUCTION
1 SCOPE
2 WARNING
3 NORMATIVE REFERENCES
4 COMPOSITION OF THE STANDARD
5 DEFINITIONS
6 UNITS
7 APPLICABILITY OF THE STANDARD
8 SYSTEM APPLICABILITY
9 SYSTEM DESIGN REQUIREMENTS
10 COMMON CHARACTERISTICS
11 DESIGN VERIFICATION AND CERTIFICATION
12 SYSTEM TYPES, SPECIAL REQUIREMENTS & APPLICABILITY
13 WEAPON SUB-SYSTEMS
14 STRUCTURES AND MATERIALS
15 ANCILLARY EQUIPMENT
ANNEX A - Definitions and Acronyms
ANNEX B - Normative And Informative References

Covers firstly the design requirements for Weapons and Associated Systems, for use in procurement and secondly those principal requirements of the design process supporting design certification.

DevelopmentNote	Supersedes DEFSTAN 07-85(PT1)/3(2006). (06/2018)
DocumentType	Standard
Pages	148
PublisherName	UK Ministry of Defence Standards
Status	Current

BS 381C:1996	Specification for colours for identification, coding and special purposes
DEFSTAN 66-31(PT4)/2(2008) : 2008	BASIC REQUIREMENTS & TESTS FOR ELECTRONIC & ELECTRICAL TEST & MEASUREMENT EQUIPMENT - PART 4: CONTRACTOR REQUIREMENTS - NAVAL USE APPLICATION
STANAG 4297 : 0	GUIDANCE ON THE ASSESSMENT OF THE SAFETY AND SUITABILITY FOR SERVICE OF MUNITIONS FOR NATO ARMED FORCES - AOP-15
AOP 39 : 2010	GUIDANCE ON THE ASSESSMENT AND DEVELOPMENT OF INSENSITIVE MUNITIONS (IM)
DEFSTAN 66-31(PT7)/2(2008) : 2008	BASIC REQUIREMENTS & TESTS FOR ELECTRONIC & ELECTRICAL TEST & MEASUREMENT EQUIPMENT - PART 7: GUIDANCE ON THE EVALUATION OF COMMERCIAL-OFF-THE-SHELF (COTS) TEST AND MEASUREMENT EQUIPMENT FOR AIR, LAND AND NAVAL APPLICATIONS
STANAG 3558 : 2002	LOCATION OF ELECTRICAL CONNECTORS FOR AIRCRAFT STORES
STANAG 4224 : 2007	LARGE CALIBRE ARTILLERY AND NAVAL GUN AMMUNITION GREATER THAN 40 MM, SAFETY AND SUITABILITY FOR SERVICE EVALUATION
AOP 32 : 0	DEMOLITION MATERIEL - ASSESSMENT AND TESTING OF SAFETY AND SUITABILITY FOR SERVICE
DEFSTAN 05-65(PT2)/1(1993) : 1993	NON-DESTRUCTIVE TESTING - PART 2: ULTRASONIC INSPECTION
STANAG 3605 : 0	COMPATIBILITY OF ARMING SYSTEMS AND EXPENDABLE AIRCRAFT STORES
BS 5245:1975	Specification for phosphoric acid based flux for soft soldered joints in stainless steel
DEFSTAN 66-31(PT5)/2(2008) : 2008	BASIC REQUIREMENTS & TESTS FOR ELECTRONIC & ELECTRICAL TEST & MEASUREMENT EQUIPMENT - PART 5: CONTRACTOR REQUIREMENTS - LAND USE APPLICATION
BS CECC00015-1(1991) : AMD 7443	HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: BASIC SPECIFICATION: PROTECTION OF ELECTROSTATIC SENSITIVE DEVICES - GENERAL REQUIREMENTS
BS 2C 13:1988	Specification for sizes of aircraft gravity filling orifices and associated replenishment nozzles (metric series)
DEFSTAN 05-65(PT1)/2(1993) : 1993	NON-DESTRUCTIVE TESTING - PART 1: RADIOGRAPHIC INSPECTION
STANAG 3104 : 2015	IDENTIFICATION OF AIRCRAFT AND MISSILE PIPELINES AND ELECTRICAL CONDUITS
STANAG 4187 : 2007	FUZING SYSTEMS - SAFETY DESIGN REQUIREMENTS
BS X 34:1992	Specification for air drying, two component, polyurethane finish for aerospace purposes
DEFSTAN 13-102/3(2004) : 2004	TESTING OF MATERIALS WHICH ARE REQUIRED TO BE COMPATIBLE WITH EXPLOSIVES
STANAG 4433 : 2001	FIELD MORTAR MUNITIONS, DESIGN SAFETY REQUIREMENTS
DEFSTAN 05-123/1(1983) : 1983	TECHNICAL PROCEDURES FOR THE PROCUREMENT OF AIRCRAFT, WEAPON AND ELECTRONIC SYSTEMS
DEFSTAN 00-088/3(2017) : 2017	PACKAGING FOR AMMUNITION AND EXPLOSIVES
MIL-STD-1760 Revision E:2007	AIRCRAFT/STORE ELECTRICAL INTERCONNECTION SYSTEM
DEFSTAN 13-92/3(1996) : 1996	MANUFACTURE, INSPECTION AND PROOF OF ORDNANCE OF 20 MM CALIBRE AND OVER
STANAG 4147 : 0	CHEMICAL COMPATIBILITY OF AMMUNITION COMPONENTS WITH EXPLOSIVES AND PROPELLANTS (NON-NUCLEAR APPLICATIONS)
STANAG 4338 : 0	UNDERWATER-LAUNCHED MUNITIONS, SAFETY EVALUATION
STANAG 4333 : 0	UNDERWATER MUNITIONS, PRINCIPLES FOR SAFE DESIGN
DEFSTAN 13-145/1(1994) : INTERIM	MECHANITE NO 14
AOP 7 : 2006	MANUAL OF DATA REQUIREMENTS AND TESTS FOR THE QUALIFICATION OF EXPLOSIVE MATERIALS FOR MILITARY USE
DEFSTAN 58-96/4(2006) : 2006	PURE GASES FOR WEAPONS SYSTEMS AND DETECTOR COOLING APPLICATIONS
STANAG 4497 : 2016	HAND-EMPLACED MUNITIONS (HEM), PRINCIPLES FOR SAFE DESIGN
STANAG 4170 : 2008	PRINCIPLES AND METHODOLOGY FOR THE QUALIFICATION OF EXPLOSIVE MATERIALS FOR MILITARY USE
STANAG 3635 : 0	AIRCRAFT STORES SUSPENSION UNITS WITH GRAVITY RELEASE CAPABILITY
STANAG 3575 : 0	AIRCRAFT STORES EJECTOR RACKS
DEFSTAN 66-31(PT1)/2(2008) : 2008	BASIC REQUIREMENTS AND TESTS FOR ELECTRONIC AND ELECTRICAL TEST AND MEASUREMENT EQUIPMENT - PART 1: INTRODUCTION AND GUIDE TO THE SPECIFICATION AND SELECTION OF TEST AND MEASUREMENT EQUIPMENT BY THE PROCURING AUTHORITY
DEFSTAN 66-31(PT3)/2(2008) : 2008	BASIC REQUIREMENTS & TESTS FOR ELECTRONIC & ELECTRICAL TEST & MEASUREMENT EQUIPMENT - PART 3: CONTRACTOR REQUIREMENTS - AIR USE APPLICATION
STANAG 4370 : 2016	ENVIRONMENTAL TESTING
STANAG 4368 : 2011	IGNITION SYSTEMS FOR ROCKET AND GUIDED MISSILE MOTORS, SAFETY DESIGN REQUIREMENTS
STANAG 3726 : 1996	BAIL (PORTAL) LUGS FOR THE SUSPENSION OF AIRCRAFT STORES
STANAG 4432 : 0	AIR-LAUNCHED GUIDED MUNITIONS: PRINCIPLES FOR SAFE DESIGN
AOP 31 : 0	DEMOLITION MATERIEL - DESIGN PRINCIPLES
STANAG 2828 : 2015	MILITARY PALLETS, PACKAGES AND CONTAINERS
DEFSTAN 05-65/1(1984) : 1984	RADIOGRAPHIC INSPECTION
DEFSTAN 61-21/3(2009) : 2009	GENERAL SPECIFICATION FOR BATTERIES
STANAG 4225 : 0	THE SAFETY EVALUATION OF MORTAR BOMBS
BS 2G 239:1992	Specification for primary active lithium batteries for use in aircraft
SAE AMS 03-2 : 2017	CLEANING AND PREPARATION OF METAL SURFACES
DEFSTAN 00-56/1(1991) : 1991	HAZARD ANALYSIS AND SAFETY CLASSIFICATION OF THE COMPUTER AND PROGRAMMABLE ELECTRONIC SYSTEM ELEMENTS OF DEFENCE EQUIPMENT
STANAG 4439 : 2010	POLICY FOR INTRODUCTION AND ASSESSMENT OF INSENSITIVE MUNITIONS (IM)
STANAG 2818 : 2002	DEMOLITION MATERIEL: DESIGN, TESTING AND ASSESSMENTS
ISO 9000:2015	Quality management systems — Fundamentals and vocabulary
STANAG 3441 : 2007	DESIGN OF AIRCRAFT STORES
BS EN 60825-1:2014	Safety of laser products Equipment classification and requirements
STANAG 4518 : 0	DEMILITARIZATION AND DISPOSAL OF MUNITIONS, PRINCIPLES FOR DESIGN FEATURES AND ASSESSMENT
DEFSTAN 05-57/5(2005) : 2005	CONFIGURATION MANAGEMENT OF DEFENCE MATERIEL
STANAG 3576 : 2016	ELECTRICAL CONNECTOR FOR DISPENSERS AND INTERNAL INTERVALOMETER TYPE ROCKET LAUNCHERS FOR AIRCRAFT
DEFSTAN 00-970/1(1983) : 1983	DESIGN REQUIREMENTS FOR SERVICE AIRCRAFT
STANAG 4396 : 2003	SYMPATHETIC REACTION - MUNITION TEST PROCEDURES
STANAG 4488 : 2009	EXPLOSIVES, SHOCK SENSITIVITY TESTS
BS EN ISO 9000:2015	Quality management systems. Fundamentals and vocabulary
DEFSTAN 66-31(PT6)/2(2008) : 2008	BASIC REQUIREMENTS & TESTS FOR ELECTRONIC & ELECTRICAL TEST & MEASUREMENT EQUIPMENT - PART 6: REQUIREMENTS FOR GENERAL PURPOSE TME APPLICATIONS
DEFSTAN 66-31(PT2)/2(2008) : 2008	BASIC REQUIREMENTS & TESTS FOR ELECTRONIC & ELECTRICAL TEST & MEASUREMENT EQUIPMENT - PART 2: CONTRACTOR GENERAL REQUIREMENTS
DEFSTAN 00-35/2(1996) : 1996 AMD 1 1997	ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL
BS EN 61340-4-5:2004	Electrostatics Standard test methods for specific applications. Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person
BS EN 853:2015	Rubber hoses and hose assemblies. Wire braid reinforced hydraulic type. Specification
DEFSTAN 00-52/3(1991) : 1991	THE GENERAL REQUIREMENTS FOR PRODUCT ACCEPTANCE AND MAINTENANCE TEST SPECIFICATIONS AND TEST SCHEDULES
STANAG 3786 : 0	SAFETY DESIGN REQUIREMENTS AND GENERAL DESIGN GUIDANCE FOR AIRBORNE DISPENSER WEAPONS