DIN 1045-4:2012-02
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Concrete, reinforced and prestressed concrete structures - Part 4: Additional rules for the production and the conformity of prefabricated elements
Available format(s)
Hardcopy , PDF
Superseded date
01-08-2023
Language(s)
German
Published date
01-02-2012
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Herstellung
4.1 Allgemeines
4.2 Besondere Anforderungen an Baustoffe und für die
Nachbehandlung
4.2.1 Baustoffe
4.2.2 Nachbehandlung
4.2.3 Beschleunigte Hydratation durch
Wärmebehandlung
4.2.4 Entformen
5 Auslieferung und Transport
6 Anforderungen an die technische und personelle
Ausstattung
6.1 TechnischeAusstattung
6.2 TechnischerWerkleiter
6.3 SonstigesPersonal
6.4 Ständige Betonprüfstelle
7 Konformitätskontrolle und Konformitätskriterien
8 Werkseigene Produktionskontrolle
9 Beurteilung der Konformität
9.1 Aufgaben des Herstellers
9.2 Überwachung und Zertifizierung der
Fertigteile durch eine anerkannte Stelle
10 Kennzeichnung und Lieferschein
This standard is included in DIN Handbook 78 and 5.
| DevelopmentNote |
Supersedes DIN 1045 and DIN 1084-2. (07/2001) Supersedes DIN 1047 (02/2003)
|
| DocumentType |
Standard
|
| Pages |
19
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| DIN V 1201:2004-08 | CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED FOR DRAINS AND SEWERS - TYPE 1 AND TYPE 2 - REQUIREMENTS, TEST METHODS AND EVALUATION OF CONFORMITY |
| DIN 1045-2:2008-08 | Concrete, reinforced and prestressed concrete structures - Part 2: Concrete - Specification, performance, production and conformity - Application rules for DIN EN 206-1 |
| DIN 1045-1:2008-08 | CONCRETE, REINFORCED AND PRESTRESSED CONCRETE STRUCTURES - PART 1: DESIGN AND CONSTRUCTION |
| VDI 4085:2017-04 | Planning, construction and managing of scrapyards - Facilities and equipment for the handling, storage and treatment of scraps and other materials |
| DIN HDBK 5 : 11ED 2013 | |
| DIN 2880:1999-01 | Application of cement mortar lining for cast iron pipes, steel pipes and fittings |
| DIN 19643-1:2012-11 | Treatment of water of swimming pools and baths - Part 1: General requirements |
| DIN 18331:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - CONCRETE WORKS |
| DIN EN 13369:2013-08 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| EN 12390-3:2009/AC:2011 | TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
| DIN EN 13670:2011-03 | Execution of concrete structures |
| DIN EN 12504-2:2012-12 | Testing concrete in structures - Part 2: Non-destructive testing - Determination of rebound number |
| DIN EN 933-1:2012-03 | Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
| VDI/BV-BS 6205 Blatt 1:2012-04 | Lifting inserts and lifting systems for precast concrete elements - Principles, design, applications - General principles |
| DIN EN 12350-4:2009-08 | TESTING FRESH CONCRETE - PART 4: DEGREE OF COMPACTABILITY |
| EN ISO 17660-2:2006 | Welding - Welding of reinforcing steel - Part 2: Non load-bearing welded joints (ISO 17660-2:2006) |
| ISO 17660-1:2006 | Welding — Welding of reinforcing steel — Part 1: Load-bearing welded joints |
| DIN 4102-22:2004-11 | FIRE BEHAVIOUR OF BUILDING MATERIALS AND BUILDING COMPONENTS - PART 22: APPLICATION STANDARD FOR DIN 4102-4 BASED ON THE DESIGN OF PARTIAL SAFETY FACTORS |
| DIN EN 12504-1:2009-07 | TESTING CONCRETE IN STRUCTURES - PART 1: CORED SPECIMENS - TAKING, EXAMINING AND TESTING IN COMPRESSION |
| DIN EN 12620:2015-07 (Draft) | AGGREGATES FOR CONCRETE |
| ISO 17660-2:2006 | Welding — Welding of reinforcing steel — Part 2: Non load-bearing welded joints |
| EN 12390-7:2009 | Testing hardened concrete - Part 7: Density of hardened concrete |
| DIN 18200:2000-05 | ASSESSMENT OF CONFORMITY FOR CONSTRUCTION PRODUCTS - CERTIFICATION OF CONSTRUCTION PRODUCTS BY CERTIFICATION BODY |
| DIN EN 12350-7:2009-08 | TESTING FRESH CONCRETE - PART 7: AIR CONTENT - PRESSURE METHODS |
| VDI/BV-BS 6205 Blatt 3:2012-04 | Lifting inserts and lifting systems for precast concrete elements - Principles, design, applications - Design and application |
| EN 1097-3:1998 | Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids |
| DIN EN ISO 17660-1:2006-12 | WELDING - WELDING OF REINFORCING STEEL - PART 1: LOAD-BEARING WELDED JOINTS |
| EN 1008:2002 | Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete |
| DIN 4102-4:2016-05 | FIRE BEHAVIOUR OF BUILDING MATERIALS AND BUILDING COMPONENTS - PART 4: SYNOPSIS AND APPLICATION OF CLASSIFIED BUILDING MATERIALS, COMPONENTS AND SPECIAL COMPONENTS |
| EN 12504-2:2012 | TESTING CONCRETE IN STRUCTURES - PART 2: NON-DESTRUCTIVE TESTING - DETERMINATION OF REBOUND NUMBER |
| DIN EN 1097-3:1998-06 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 3: DETERMINATION OF LOOSE BULK DENSITY AND VOIDS |
| DIN EN ISO 17660-2:2006-12 | Welding - Welding of reinforcing steel - Part 2: Non load-bearing welded joints (ISO 17660-2:2006) |
| DIN EN 1992-1-2:2010-12 | Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design (includes Corrigendum AC:2008) |
| DIN EN 12390-7:2009-07 | TESTING HARDENED CONCRETE - PART 7: DENSITY OF HARDENED CONCRETE |
| EN ISO 17660-1:2006 | Welding - Welding of reinforcing steel - Part 1: Load-bearing welded joints (ISO 17660-1:2006) |
| EN 933-1:2012 | Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
| EN 12350-5:2009 | Testing fresh concrete - Part 5: Flow table test |
| DIN EN 1097-6:2013-09 | Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption |
| EN 12620:2002+A1:2008 | Aggregates for concrete |
| DIN EN 12350-5:2009-08 | TESTING FRESH CONCRETE - PART 5: FLOW TABLE TEST |
| DIN EN 12390-2:2009-08 | TESTING HARDENED CONCRETE - PART 2: MAKING AND CURING SPECIMENS FOR STRENGTH TESTS |
| DIN V 20000-120:2006-04 | Application of building products in structures - Part 120: Application rules for DIN EN 13369:2004-09 |
| DIN 1045-3:2012-03 | Concrete, reinforced and prestressed concrete structures - Part 3: Execution of structures - Application rules for DIN EN 13670 |
| EN 12350-4:2009 | Testing fresh concrete - Part 4: Degree of compactability |
| EN 12390-2:2009 | Testing hardened concrete - Part 2: Making and curing specimens for strength tests |
| DIN 1045-2:2008-08 | Concrete, reinforced and prestressed concrete structures - Part 2: Concrete - Specification, performance, production and conformity - Application rules for DIN EN 206-1 |
| EN 206-1:2000/A2:2005 | CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| VDI/BV-BS 6205 Blatt 2:2012-04 | Lifting inserts and lifting systems for precast concrete elements - Principles, design, applications - Production and placing on the market |
| EN 1097-6:2013 | Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption |
| DIN EN 13791:2008-05 | ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS |
| DIN 18203-1:1997-04 | TOLERANCES IN BUILDING CONSTRUCTION - PART 1: PREFABRICATED COMPONENTS MADE OF CONCRETE, REINFORCED CONCRETE AND PRESTRESSED CONCRETE |
| EN 12350-7:2009 | Testing fresh concrete - Part 7: Air content - Pressure methods |
| EN 13055-1:2002/AC:2004 | LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT |
| EN 12504-1:2009 | Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression |
| DIN EN 1992-1-1:2011-01 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
| DIN EN 1008:2002-10 | MIXING WATER FOR CONCRETE - SPECIFICATION FOR SAMPLING, TESTING AND ASSESSING THE SUITABILITY OF WATER, INCLUDING WATER RECOVERED FROM PROCESSES IN THE CONCRETE INDUSTRY, AS MIXING WATER FOR CONCRETE |
| DIN EN 934-2:2012-08 | ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 2: CONCRETE ADMIXTURES - DEFINITIONS, REQUIREMENTS, CONFORMITY, MARKING AND LABELLING |
| EN 934-2:2009+A1:2012 | Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling |
| EN 13791:2007 | Assessment of in-situ compressive strength in structures and precast concrete components |
£66.62
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - German
PDF - German
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.