• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

DIN 254:2003-04

Current
Current

The latest, up-to-date edition.

GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPER ANGLES - VALUES FOR SETTING TAPER ANGLES AND SETTING HEIGHTS
Available format(s)

Hardcopy , PDF

Language(s)

German, English

Published date

01-04-2003

Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe und Symbole
4 Zusätzliche Kegel, Werte für Einstellwinkel
  und Einstellhöhen
Anhang A (informativ) Kegel für besondere
         Anwendungsgebiete
Literaturhinweise

This standard is included in DIN Handbook 1, 1 E,14, 11-1, 151 and 167. Applies to conical tapers with taper angle alpha up to 165degree for general ranges of application. It does not apply to special cases such as bevel gear tooth systems. It is the purpose of these provisions to secure a reduction in the range of tools, gauges and measuring instruments required for manufacturing and testing through application of the recommended preferred values for conical tapers.

DevelopmentNote
Together with DIN EN ISO 1119 supersedes DIN 254:2000 (04/2003)
DocumentType
Standard
Pages
9
ProductNote
Together with DIN EN ISO 1119 supersedes DIN 254:2000 (ABM 04/2003)
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Current

ISO 8489-4:1995 Textile machinery and accessories — Cones for cross winding — Part 4: Dimensions, tolerances and designation of cones with half angle 4 degrees 20' for winding for dyeing purposes
DIN 72311-4:1985-04 LEAD STORAGE BATTERIES - STARTER BATTERIES, TERMINALS, VENT PLUGS AND FILLER OPENINGS
DIN 6388:1993-02 COLLETS FOR TOOL HOLDER WITH TAPER 1:10; COLLETS, HOLDER, NUTS
DIN 64420-6:1976-04 CONES, HALF ANGLE OF THE CONE 9 DEG 15'; CONES, GAUGES
DIN 238-2:1967-03 DRILL CHUCK MOUNTING ARRANGEMENTS - DRILL CHUCK TAPERS
ISO 8434-1:2007 Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectors
DIN 69063-1:2008-08 MACHINE TOOLS - TOOL RECEIVER FOR HOLLOW TAPER SHANKS - PART 1: FOR TYPE A AND TYPE C ACCORDING TO DIN 69893, CONNECTING DIMENSIONS
ISO 297:1988 7/24 tapers for tool shanks for manual changing
ISO 1119:2011 Geometrical product specifications (GPS) — Series of conical tapers and taper angles
DIN EN ISO 10651-4:2009-08 Lung ventilators - Part 4: Particular requirements for operator-powered resuscitators (ISO 10651-4:2002)
DIN 3861:2016-09 NON-SOLDERING COMPRESSION FITTINGS - COMPRESSION RINGS - DESIGN
ISO 8489-5:1995 Textile machinery and accessories — Cones for cross winding — Part 5: Dimensions, tolerances and designation of cones with half angle 5 degrees 57'
DIN 158-1:1997-06 METRIC EXTERNAL TAPER SCREW THREADS AND MATING INTERNAL PARALLEL SCREW THREADS - PART 1: NOMINAL SIZES, LIMIT DEVIATIONS, LIMITS OF SIZE AND VERIFICATION
ISO 595-2:1987 Reusable all-glass or metal-and-glass syringes for medical use Part 2: Design, performance requirements and tests
DIN 3867:2012-02 NON-SOLDERING COMPRESSION COUPLINGS - PRESSURE BUSH FOR BUTT JOINTS
DIN 204:1996-12 HAND REAMERS FOR MORSE TAPERS
ISO 5356-1:2015 Anaesthetic and respiratory equipment Conical connectors Part 1: Cones and sockets
ISO 10651-4:2002 Lung ventilators — Part 4: Particular requirements for operator-powered resuscitators
DIN 69893-2:2013-11 (Draft) HOLLOW TAPER SHANKS WITH FLANGE CONTACT SURFACE - PART 2: HOLLOW TAPER SHANK TYPE B - DIMENSIONS AND DESIGN
ISO 1483:2011 Slotted raised countersunk (oval) head tapping screws
ISO 8382:1988 Resuscitators intended for use with humans
DIN 2353:2013-01 NON-SOLDERING COMPRESSION FITTINGS WITH CUTTING RING - COMPLETE FITTINGS AND SURVEY
ISO 1482:2011 Slotted countersunk (flat) head tapping screws
DIN 3901:2001-09 NON-SOLDERING COMPRESSION FITTINGS WITH CUTTING RING - DOUBLE ENDED STUD ENDS WITH PARALLEL THREAD FOR STUD ENDS TYPE A
DIN 2999-1:1983-07 PIPE THREADS FOR TUBES AND FITTINGS - PARALLEL INTERNAL THREAD AND TAPER EXTERNAL THREAD - TREAD DIMENSIONS
ISO 8489-3:1995 Textile machinery and accessories — Cones for cross winding — Part 3: Dimensions, tolerances and designation of cones with half angle 4 degrees 20'
DIN EN ISO 1119:2012-04 Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)
ISO 296:1991 Machine tools — Self-holding tapers for tool shanks
ISO 595-1:1986 Reusable all-glass or metal-and-glass syringes for medical use Part 1: Dimensions
ISO 8489-2:1995 Textile machinery and accessories — Cones for cross winding — Part 2: Dimensions, tolerances and designation of cones with half angle 3 degrees 30'
IEC 60095-2:2009 Lead-acid starter batteries - Part 2: Dimensions of batteries and dimensions and marking of terminals
ISO 575:1978 Textile machinery and accessories Transfer cones Half angle of the cone 4 degrees 20'
DIN EN 1707:1997-01 CONICAL FITTINGS WITH A 6% (LUER) TAPER FOR SYRINGES, NEEDLES AND CERTAIN OTHER MEDICAL EQUIPMENT - LOCK FITTINGS
DIN EN 20594-1:1995-01 CONICAL FITTINGS WITH A 6 % (LUER) TAPER FOR SYRINGES, NEEDLES AND CERTAIN OTHER MEDICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS
DIN EN ISO 595-2:1994-10 REUSABLE ALL-GLASS OR METAL-AND-GLASS SYRINGES FOR MEDICAL USE - PART 2: DESIGN, PERFORMANCE REQUIREMENTS AND TESTS
ISO 839-2:1977 Milling machine arbors with 7/24 tapers — Part 2: Accessories
DIN EN 794-3:2009-12 Lung ventilators - Part 3: Particular requirements for emergency and transport ventilators (includes Amendment A2:2009)
ISO 239:1999 Drill chuck tapers
ISO 839-1:2006 Milling machine arbors with 7/24 tapers Part 1: Dimensions and designation
DIN 2080-1:2011-11 7/24 taper shanks for tools and clamping devices - Part 1: Type A
ISO 368:2006 Spinning preparatory, spinning and doubling (twisting) machinery Tubes for ring-spinning, doubling and twisting spindles, taper 1:38 and 1:64
DIN 2079:1987-08 7/24 TAPERS FOR SPINDLE NOSES FOR MACHINE TOOLS
DIN 6364:2000-12 REDUCTION SLEEVES WITH EXTERNAL TAPER SHANK 7/24 FOR MORSE TAPER SHANK WITH TIGHTENING THREAD
ISO 594-2:1998 Conical fittings with 6 % (Luer) taper for syringes, needles and certain other medical equipment Part 2: Lock fittings
DIN EN ISO 8434-1:2016-10 (Draft) METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
ISO 594-1:1986 Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment Part 1: General requirements
DIN 2080-2:2011-11 7/24 taper shanks for tools and clamping devices - Part 2: Form B
DIN 1895:2007-05 MACHINE REAMERS FOR MORSE TAPERS
DIN EN 60095-2 : 1994 AMD 11 1996 LEAD-ACID STARTER BATTERIES; PART 2: DIMENSIONS OF BATTERIES AND DIMENSIONS AND MARKING OF TERMINALS

View more information
£48.41
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.