|
DIN 964:1990-08
|
SLOTTED RAISED COUNTERSUNK (OVAL) HEAD SCREWS
|
|
DIN 65523:1984-07
|
Aerospace; hexagon bolts, with MJ-thread, short thread, corrosion-resisting steel, nominal tensile strength 700 MPa, for temperatures up to 425 C
|
|
DIN 28125-3:1989-04
|
HINGED COVERS - CIRCULAR SHAPE WITH PROTECTION RING AND SURFACE COATED - DN 500 AND DN 600
|
|
DIN 9021:1990-03
|
WASHERS WITH OUTSIDE DIAMETER CA. 3 X NOMINAL THREAD DIAMETER
|
|
DIN 6922:1983-06
|
HEXAGON FLANGE BOLTS WITH REDUCED SHANK
|
|
DIN 966:1990-08
|
CROSS RECESSED RAISED COUNTERSUNK HEAD SCREWS
|
|
DIN 65370:1991-07
|
Aerospace; sockets, eight- and fourteen-pole 5 Amp
|
|
DIN 7985:1990-08
|
CROSS RECESSED RAISED CHEESE HEAD SCREWS
|
|
DIN 25202:1992-04
|
RAILWAY VEHICLES - SECURING OF BOLTED JOINTS - INITIAL STRESSING FORCES AND TIGHTENING TORQUES
|
|
DIN 965:1990-08
|
CROSS RECESSED COUNTERSUNK (FLAT) HEAD SCREWS
|
|
DIN 28125-1:1989-08
|
DN 150 TO DN 600 ROUND HINGED CLOSURES
|
|
DIN 43673-1:1982-02
|
DRILLED HOLES AND SCREW CONNECTIONS FOR BUSBARS; RECTANGULAR CROSS SECTION BUSBARS
|
|
DIN 28125-2:1989-04
|
HINGED COVERS - ELLIPTICAL, 350 MM X 450 MM
|
|
DIN 915:1980-12
|
HEXAGON SOCKET SET SCREWS WITH DOG POINT, ISO 4028 MODIFIED
|
|
DIN 914:1980-12
|
HEXAGON SOCKET SET SCREWS WITH CONE POINT, ISO 4027 MODIFIED
|
|
DIN 125-2:1990-03
|
PRODUCT GRADE A WASHERS WITH A HARDNESS FROM 300 HV, DESIGNED FOR USE WITH HEXAGON HEAD BOLTS AND NUTS
|
|
DIN 65522:1984-07
|
AEROSPACE - SCREWS, HEXAGON, WITH MJ-THREAD, THREADED APPROXIMATELY TO HEAD, CORROSION-RESISTING STEEL, NOMINAL TENSILE STRENGTH 700 MPA, FOR TEMPERATURES UP TO 425 DEGREES C
|
|
DIN 975:1986-09
|
THREADED RODS
|
|
DIN 25452:1992-04
|
MECHANICAL DESIGN OF FUEL ELEMENT STORAGE POOL IN NUCLEAR POWER PLANTS WITH LIGHT-WATER REACTORS
|
|
DIN 57636-22 : 1984
|
LOW-VOLTAGE FUSES - PART 22: H.R.C. FUSES; H.R.C. FUSES UP TO 1250 A AND 1000 V A.C. FOR PROTECTION OF EQUIPMENT
|
|
DIN 7991:1986-01
|
HEXAGON SOCKET COUNTERSUNK HEAD CAP SCREWS
|
|
DIN 28125 Beiblatt 1:1989-04
|
Hinged covers; example for construction of a lifting aid
|
|
DIN 976 : DRAFT 93 S/S
|
STUD BOLTS
|
|
DIN 125-1:1990-03
|
PRODUCT GRADE A WASHERS WITH A HARDNESS UP TO 250 HV, DESIGNED FOR USE WITH HEXAGON HEAD BOLTS AND NUTS
|
|
DIN 963:1990-08
|
SLOTTED COUNTERSUNK (FLAT) HEAD SCREWS
|
|
VDE 0636-22 : 1984
|
LOW-VOLTAGE FUSES - PART 22: H.R.C. FUSES; H.R.C. FUSES UP TO 1250 A AND 1000 V A.C. FOR PROTECTION OF EQUIPMENT
|
|
DIN 427:1986-09
|
SLOTTED HEADLESS SCREWS WITH CHAMFERED END
|
|
DIN 84:1990-08
|
SLOTTED CHEESE HEAD SCREWS; PRODUCT GRADE A
|
|
DIN 85:1990-08
|
SLOTTED PAN HEAD SCREWS; PRODUCT GRADE A
|
|
DIN 57636-21 : 1984
|
LOW-VOLTAGE FUSES - PART 21: H.R.C. FUSES; PROTECTION OF CABLES AND CORDS UP TO 1250 A AND 500 V A.C., 440 V D.C. AND 660 V A.C.
|
|
DIN 65371:1992-06
|
AEROSPACE; SOCKETS, FIVE- AND ELEVEN-POLE, 10 AMP
|
|
DIN VDE 0636-22 : 1984
|
LOW-VOLTAGE FUSES - PART 22: H.R.C. FUSES - H.R.C. FUSES UP TO 1250 A AND 1000 V A.C. FOR PROTECTION OF EQUIPMENT
|
|
DIN 7337:1991-08
|
BLIND RIVETS WITH BREAK MANDREL
|
|
DIN 3547-1:1990-06
|
PN 4 TO PN 16 GAS AND WATER STOPVALVES; REQUIREMENTS AND ACCEPTANCE TESTING
|
|
DIN 65502:1984-07
|
AEROSPACE - PAN HEAD BOLTS WITH RIPPED TORQ-SET (ACR) RECESS AND MJ-THREAD, SHORT THREAD, CORROSION-RESISTING STEEL, NOMINAL TENSILE STRENGTH 700 MPA, FOR TEMPERATURES UP TO 425 DEGREES C
|
|
DIN 48801:1985-03
|
LIGHTNING PROTECTION SYSTEMS; CONDUCTORS, SCREWS AND NUTS
|
|
DIN 28129:1990-03
|
Clamp nuts; for covers
|
