DIN EN 10088-2:2014-12
Current
The latest, up-to-date edition.
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
Hardcopy , PDF
German, English
01-01-2014
National foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Designation and ordering
5 Classification of grades
6 Requirements
7 Inspection and testing
8 Marking
Annex A (informative) - Guidelines for further treatment
(including heat treatment) in fabrication
Annex B (informative) - Applicable dimensional standards
Bibliography
This Standard is included in DIN Handbook 405 E. Defines the technical delivery conditions for hot or cold rolled sheet/plate and strip of standard grades and special grades of corrosion resisting stainless steels for general purposes.
DocumentType |
Standard
|
Pages |
50
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Current
|
Supersedes |
Standards | Relationship |
I.S. EN 10088-2:2014 | Identical |
NEN EN 10088-2 : 2014 | Identical |
NS EN 10088-2 : 2014 | Identical |
NF EN 10088-2 : 2014 | Identical |
SN EN 10088-2 : 2014 | Identical |
UNI EN 10088-2:2014 | Identical |
NBN EN 10088-2 : 2014 | Identical |
EN 10088-2:2014 | Identical |
BS EN 10088-2:2014 | Identical |
UNE-EN 10088-2:2015 | Identical |
DIN 4935-1:2002-06 | STAINLESS STEEL WIRE WRAPPED WELL SCREENS - PART 1: SIZES DN 40 TO DN 100 THREADED SCREENS WITH CONTINUOUS SLOT |
DIN 4935-3:2002-06 | STAINLESS STEEL WIRE WRAPPED WELL SCREENS - PART 3: SIZES DN 500 TO DN 1000 FLANGED SCREENS WITH CONTINUOUS SLOT |
DIN 4935-2:2002-06 | STAINLESS STEEL WIRE WRAPPED WELL SCREENS - PART 2: SIZES DN 100 TO DN 500 THREADED SCREENS WITH CONTINUOUS SLOT |
ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
EN ISO 14284:2002 | Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996) |
EN 10052:1993 | Vocabulary of heat treatment terms for ferrous products |
EN ISO 6508-1:2016 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) |
EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
EN 10079:2007 | Definition of steel products |
EN 10027-2:2015 | DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM |
CEN/TR 10261:2013 | Iron and steel - European standards for the determination of chemical composition |
EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
ISO 15510:2014 | Stainless steels Chemical composition |
EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
EN 10151:2002 | Stainless steel strip for springs - Technical delivery conditions |
EN 10168:2004 | Steel products - Inspection documents - List of information and description |
EN 10028-7:2016 | Flat products made of steels for pressure purposes - Part 7: Stainless steels |
ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
EN 10095:1999 | Heat resisting steels and nickel alloys |
EN 10163-2:2004 | Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats |
EN 10163-1:2004/AC:2007 | DELIVERY REQUIREMENTS FOR SURFACE CONDITION OF HOT-ROLLED STEEL PLATES, WIDE FLATS AND SECTIONS - PART 1: GENERAL REQUIREMENTS |
EN 10021:2006 | General technical delivery conditions for steel products |
ISO 3651-2:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
EN 10204:2004 | Metallic products - Types of inspection documents |
EN 10307:2001 | Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method) |
EN ISO 6892-2:2011 | Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011) |
EN ISO 3651-2 : 1998 | DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID |
EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
ISO 6892-2:2011 | Metallic materials Tensile testing Part 2: Method of test at elevated temperature |
EN ISO 148-1:2016 | Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
EN 10302:2008 | Creep resisting steels, nickel and cobalt alloys |
ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.