DIN EN 13195-1:2002-11
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) - PART 1: SPECIFICATIONS
Hardcopy , PDF
01-10-2008
English
01-01-2002
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Wrought aluminium alloy products for structural
applications
4.1 Alloys, product forms and tempers
4.2 Mechanical properties
4.3 Tolerances on dimensions and form
4.4 Technical conditions for inspection and delivery
5 Wrought aluminium and aluminium alloy products for
non-structural applications and rivets
5.1 Alloys, product forms and tempers
5.2 Mechanical properties
5.3 Tolerances on dimensions and form
5.4 Technical conditions for inspection and delivery
6 Castings
6.1 Alloys, product forms and tempers
6.2 Mechanical properties
6.3 Technical conditions for delivery of castings
Annex A (informative) - Recommendations for the proper use
of certain alloys
Bibliography
Gives properties and technical conditions for inspection and delivery of wrought and cast aluminium and aluminium alloy products recommended for marine applications. Applicable to flat rolled products, extruded products, cold drawn products, forgings and castings.
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Withdrawn
|
| Standards | Relationship |
| NS EN 13195-1 : 1ED 2002 | Identical |
| I.S. EN 13195-1:2002 | Identical |
| NEN EN 13195-1 : 2002 | Identical |
| NF EN 13195-1 : 2002 | Identical |
| EN 13195-1 : 2002 | Identical |
| NBN EN 13195-1 : 2003 | Identical |
| UNE-EN 13195-1:2003 | Identical |
| UNI EN 13195-1 : 2004 | Identical |
| SN EN 13195-1 : 2002 | Identical |
| BS EN 13195-1:2002 | Identical |
| DIN 4140:1996-11 | INSULATION WORK ON INDUSTRIAL INSTALLATIONS AND BUILDING EQUIPMENT - EXECUTION OF THERMAL AND COLD INSULATIONS |
| EN 1301-2:2008 | Aluminium and aluminium alloys - Drawn wire - Part 2: Mechanical properties |
| EN 485-1:2016 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
| EN 755-1:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery |
| EN 754-3:2008 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3: Round bars, tolerances on dimensions and form |
| EN 754-7:2016 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form |
| EN 755-5:2008 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 5: Rectangular bars, tolerances on dimensions and form |
| EN 1301-1:2008 | Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery |
| EN 1011-4:2000/A1:2003 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 4: ARC WELDING OF ALUMINIUM AND ALUMINIUM ALLOYS |
| EN 485-3:2003 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products |
| EN 755-9:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form |
| EN 485-2:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES |
| EN 485-4:1993 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products |
| EN 755-3:2008 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 3: Round bars, tolerances on dimensions and form |
| EN 1592-1:1997 | Aluminium and aluminium alloys - HF seam welded tubes - Part 1: Technical conditions for inspection and delivery |
| EN 586-2:1994 | Aluminium and aluminium alloys - Forgings - Part 2: Mechanical properties and additional property requirements |
| EN 755-8:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form |
| EN 755-4:2008 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 4: Square bars, tolerances on dimensions and form |
| EN 586-3:2001 | Aluminium and aluminium alloys - Forgings - Part 3: Tolerances on dimensions and form |
| EN 755-7:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes, tolerances on dimensions and form |
| EN 12020-2:2016/AC:2017 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 2: TOLERANCES ON DIMENSIONS AND FORM |
| EN 1301-3:2008 | Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions |
| EN 754-6:2008 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances on dimensions and form |
| EN 755-6:2008 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 6: Hexagonal bars, tolerances on dimensions and form |
| EN 12258-1:2012 | Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms |
| ASTM G 66 : 1999 | Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test) |
| EN 1706:2010 | Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties |
| EN 754-1:2016 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery |
| EN 1559-1:2011 | Founding - Technical conditions of delivery - Part 1: General |
| EN 1592-4:1997 | Aluminium and aluminium alloys - HF seam welded tubes - Part 4: Tolerances on dimensions and form for square, rectangular and shaped tubes |
| EN 515:2017 | Aluminium and aluminium alloys - Wrought products - Temper designations |
| EN 754-5:2008 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances on dimensions and form |
| EN 573-4:2004 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 4: Forms of products |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 586-1:1997 | Aluminium and aluminium alloys - Forgings - Part 1: Technical conditions for inspection and delivery |
| EN 754-8:2016 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on dimensions and form |
| EN 754-2:2016 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties |
| EN 1592-2:1997 | Aluminium and aluminium alloys - HF seam welded tubes - Part 2: Mechanical properties |
| EN 1559-4:2015 | Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castings |
| EN 1592-3:1997 | Aluminium and aluminium alloys - HF seam welded tubes - Part 3: Tolerances on dimensions and form for circular tubes |
| EN 754-4:2008 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4: Square bars, tolerances on dimensions and form |
| EN 573-3:2013 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
| EN 755-2:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties |
| EN 12020-1:2008 | Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.