|
EN 1127-1:2011
|
Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
|
|
EN 894-3:2000+A1:2008
|
Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators
|
|
EN 12464-1:2011
|
Light and lighting - Lighting of work places - Part 1: Indoor work places
|
|
EN 982:1996+A1:2008
|
Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
|
|
EN 1037:1995+A1:2008
|
Safety of machinery - Prevention of unexpected start-up
|
|
EN 547-2:1996+A1:2008
|
Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings
|
|
ISO 14122-1:2016
|
Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access
|
|
EN 1088:1995+A2:2008
|
Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
|
|
CLC/TS 61496-2:2006
|
Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs)
|
|
ISO/TR 11688-1:1995
|
Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
|
|
EN 894-2:1997+A1:2008
|
Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
|
|
ISO 13732-1:2006
|
Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
|
|
EN 999:1998+A1:2008
|
Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body
|
|
EN 349:1993+A1:2008
|
Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
|
|
EN 13478:2001+A1:2008
|
Safety of machinery - Fire prevention and protection
|
|
IEC 60204-1:2016
|
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
|
|
EN 547-1:1996+A1:2008
|
Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery
|
|
EN ISO 13850:2015
|
Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
|
|
ISO 11689:1996
|
Acoustics — Procedure for the comparison of noise-emission data for machinery and equipment
|
|
EN 1005-2:2003+A1:2008
|
Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery
|
|
IEC 60947-5-1 : 4.0
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
|
|
EN 1760-1:1997+A1:2009
|
Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
|
|
EN 614-1:2006+A1:2009
|
Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
|
|
EN ISO 13857:2008
|
Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
|
|
EN ISO 11688-2 : 2000
|
ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN
|
|
IEC 60335-2-69:2016
|
Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use
|
|
EN ISO 13732-1:2008
|
Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
|
|
EN 626-2:1996+A1:2008
|
Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures
|
|
EN 60335-2-69:2012
|
Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use
|
|
EN ISO 12100-1:2003/A1:2009
|
SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
|
|
EN 61496-1:2013/AC:2015
|
SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 61496-1:2012)
|
|
EN ISO 11689:1996/AC:2009
|
Acoustics - Procedure for the comparison of noise-emission data for machinery and equipment (ISO 11689:1996/Cor 1:2007)
|
|
EN 953:1997+A1:2009
|
Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
|
|
EN 12545:2000+A1:2009
|
Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements
|
|
EN ISO 14122-2:2016
|
Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016)
|
|
ISO 12100-2:2003
|
Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
|
|
ISO 13857:2008
|
Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
|
|
EN ISO 12100-2:2003/A1:2009
|
SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
|
|
IEC 61496-1:2012
|
Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
|
|
EN 983:1996+A1:2008
|
Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
|
|
ISO 12100-1:2003
|
Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
|
|
EN ISO 13849-1:2015
|
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
|
|
ISO 13850:2015
|
Safety of machinery Emergency stop function Principles for design
|
|
IEC 61310-1:2007
|
Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
|
|
EN 626-1:1994+A1:2008
|
Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers
|
|
EN 1760-2:2001+A1:2009
|
Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars
|
|
EN 1005-3:2002+A1:2008
|
Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation
|
|
ISO 14122-2:2016
|
Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways
|
|
EN ISO 11688-1:2009
|
Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
|
|
EN ISO 14122-1:2016
|
Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016)
|
|
ISO 13849-1:2015
|
Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
|
|
ISO/TR 11688-2:1998
|
Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design
|
|
EN 61310-1:2008
|
Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
|
|
IEC 61496-2:2013
|
Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs)
|
|
EN 60204-1 : 2006 COR 2010
|
SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.