• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

DIN EN 13766:2010-11

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION
Available format(s)

Hardcopy , PDF

Superseded date

02-03-2019

Language(s)

English

Published date

01-01-2010

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Materials and construction
6 Dimensions
   6.1 Internal diameters, with tolerances and minimum bend radii
   6.2 Tolerance on length
7 Performance requirements of hoses and hose assemblies
   7.1 Film and fabric
   7.2 Hoses
   7.3 End fittings
   7.4 Hose assemblies
8 Test frequency
9 Type approval tests
10 Marking
   10.1 Hose marking
   10.2 Hose assembly marking
Annex A (normative) Crush recovery test
Annex B (normative) Method of test for thermal ageing
Annex C (normative) Method of test of fittings subjected to low
        temperatures
        C.1 General
        C.2 Specimen size
Annex D (normative) Sequence of hydrostatic tests
Annex E (normative) Method of test for fitting security
Annex F (normative) Method of test for leak tightness
Annex G (normative) Type approval and routine tests
                      for hoses and hose assemblies
Annex H (informative) Batch tests for hoses and hose assemblies

Describes requirements for two types of thermoplastic multi-layer (non-vulcanized) transfer hoses and hose assemblies for carrying liquefied petroleum gas and liquefied natural gas.

DevelopmentNote
DRAFT 2016 issued in November 2016. (11/2016)
DocumentType
Standard
Pages
25
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Superseded
SupersededBy

Standards Relationship
NF EN 13766 : 2010 Identical
NS EN 13766 : 2010 Identical
NBN EN 13766 : 2010 Identical
ONORM EN 13766 : 2010 Identical
PREN 13766 : DRAFT 2016 Identical
UNE-EN 13766:2011 Identical
UNI EN 13766 : 2010 Identical
SN EN 13766 : 2010 Identical
I.S. EN 13766:2010 Identical
NEN EN 13766 : 2010 Identical
BS EN 13766:2010 Identical
EN 13766:2010 Identical

ISO 13934-1:2013 Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method
EN ISO 8330:2014 Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2014)
EN ISO 1402:2009 Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009)
EN ISO 4671:2007/A1:2011 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies - Amendment 1: Clarification of position at which outside diameter is measured (ISO 4671:2007/Amd 1:2011)
EN ISO 13934-1:2013 Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013)
EN ISO 1043-1:2011/A1:2016 PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016)
ISO 4672:1997 Rubber and plastics hoses Sub-ambient temperature flexibility tests
EN 10088-3:2014 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
EN 1474-2:2008 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses
EN ISO 8031:2009 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2009)
EN ISO 4672 : 1999 RUBBER AND PLASTICS HOSES - SUB-AMBIENT TEMPERATURE FLEXIBILITY TESTS
DIN EN ISO 1043-1:2016-09 PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011 + AMD.1:2016)
EN ISO 527-1:2012 Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012)
EN ISO 7326:2016 Rubber and plastics hoses - Assessment of ozone resistance under static conditions (ISO 7326:2016)
ISO 7326:2016 Rubber and plastics hoses Assessment of ozone resistance under static conditions
EN 10045-1 : 1990 METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD
ISO 8330:2007 Rubber and plastics hoses and hose assemblies Vocabulary
DIN EN ISO 7326:2015-10 (Draft) RUBBER AND PLASTICS HOSES - ASSESSMENT OF OZONE RESISTANCE UNDER STATIC CONDITIONS (ISO 7326:2016)
DIN EN ISO 13934-1:2013-08 TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 1: DETERMINATION OF MAXIMUM FORCE AND ELONGATION AT MAXIMUM FORCE USING THE STRIP METHOD (ISO 13934-1:2013)
ISO 4671:2007 Rubber and plastics hoses and hose assemblies Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
ISO 1402:2009 Rubber and plastics hoses and hose assemblies Hydrostatic testing
ISO 1043-1:2011 Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics
DIN EN ISO 1402:2010-04 Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009)
ISO 8031:2009 Rubber and plastics hoses and hose assemblies Determination of electrical resistance and conductivity
ISO 527-1:2012 Plastics Determination of tensile properties Part 1: General principles

View more information
£106.14
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.