Cranes - Offshore cranes - Part 2: Floating cranes

Available format(s)

Hardcopy , PDF

Language(s)

English, German

Published date

01-03-2005

Publisher

German Institute for Standardisation (Deutsches Institut für Normung)

DocumentType	Standard
Pages	64
PublisherName	German Institute for Standardisation (Deutsches Institut für Normung)
Status	Current

Standards	Relationship
I.S. EN 13852-2:2004	Identical
NEN EN 13852-2 : 2004	Identical
SN EN 13852-2 : 2005	Identical
BS EN 13852-2:2004	Identical
EN 13852-2:2004	Identical
NF EN 13852-2 : 2005	Identical
UNE-EN 13852-2:2006	Identical
NS EN 13852-2 : 1ED 2005	Identical
UNI EN 13852-2 : 2005	Identical
NBN EN 13852-2 : 2005	Identical

EN 10113-2 : 1993	HOT-ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEELS - DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED STEELS
EN 1127-1:2011	Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
IEC 60079-1:2014 RLV	Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
ISO 4308-1:2003	Cranes and lifting appliances Selection of wire ropes Part 1: General
IEC 60079-10:2002	Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
EN 12385-2:2002+A1:2008	Steel wire ropes - Safety - Part 2: Definitions, designation and classification
EN 12385-4:2002+A1:2008	Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications
EN 894-3:2000+A1:2008	Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators
IEC 61000-6-4:2006+AMD1:2010 CSV	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
EN 13557:2003+A2:2008	Cranes - Controls and control stations
EN 418 : 1992	SAFETY OF MACHINERY - EMERGENCY STOP EQUIPMENT, FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN
EN 982:1996+A1:2008	Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
ISO 4871:1996	Acoustics — Declaration and verification of noise emission values of machinery and equipment
EN 12385-1:2002+A1:2008	Steel wire ropes - Safety - Part 1: General requirements
ISO 12480-1:1997	Cranes Safe use Part 1: General
EN 12644-2:2000+A1:2008	Cranes - Information for use and testing - Part 2: Marking
EN 60079-1:2014	Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 61310-2:2007	Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
ISO/TR 11688-1:1995	Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
IEC 61131-3:2013	Programmable controllers - Part 3: Programming languages
EN 10137-1 : 1995	PLATES AND WIDE FLATS MADE OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED OR PRECIPITATION HARDENED CONDITIONS - GENERAL DELIVERY CONDITIONS
EN 61310-2:2008	Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
EN 60079-0:2012/A11:2013	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED)
EN 50020:2002	Electrical apparatus for potentially explosive atmospheres - Intrinsic safety 'i'
EN 12385-3:2004+A1:2008	Steel wire ropes - Safety - Part 3: Information for use and maintenance
EN 60079-15:2010	Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
EN 13463-1:2009	Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
EN 13135-2:2004+A1:2010	Cranes - Equipment - Part 2: Non-electrotechnical equipment
ISO 12478-1:1997	Cranes Maintenance manual Part 1: General
EN 61310-3:2008	Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators
IEC 60079-18:2014 RLV	Explosive atmospheres - Part 18: Equipment protection by encapsulation “m”
IEC 61310-3:2007	Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators
ISO 8566-1:2010	Cranes Cabins and control stations Part 1: General
EN 10025:1990/A1:1993	HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS
ISO 9927-1:2013	Cranes — Inspections — Part 1: General
EN 13586:2004+A1:2008	Cranes - Access
EN 1050 : 1996	SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
EN 50017:1998	Electrical apparatus for potentially explosive atmospheres - Powder filling "q"
EN 61131-3:2013	Programmable controllers - Part 3: Programming languages
EN 614-1:2006+A1:2009	Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
EN 13411-3:2004+A1:2008	Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing
EN ISO 11688-2 : 2000	ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN
EN 12644-1:2001+A1:2008	Cranes - Information for use and testing - Part 1: Instructions
ISO 7731:2003	Ergonomics Danger signals for public and work areas Auditory danger signals
EN 10137-2 : 1995	PLATES AND WIDE FLATS MADE OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED OR PRECIPITATION HARDENED CONDITIONS - DELIVERY CONDITIONS FOR QUENCHED AND TEMPERED STEELS
EN 13135-1:2003+A1:2010	Cranes - Equipment - Part 1: Electrotechnical equipment
EN 10113-1 : 1993	HOT ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEELS - GENERAL DELIVERY CONDITIONS
EN ISO 12100-1:2003/A1:2009	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
EN 61000-6-2:2005/corrigendum:2005	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005)
EN 842:1996+A1:2008	Safety of machinery - Visual danger signals - General requirements, design and testing
EN 61000-6-4:2007/A1:2011	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
IEC 60079-0:2011	Explosive atmospheres - Part 0: Equipment - General requirements
EN 13411-4:2011	Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing
EN 13411-6:2004+A1:2008	Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket
EN 10204:2004	Metallic products - Types of inspection documents
EN 60079-10:2003	Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
ISO 12100-2:2003	Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
EN ISO 12100-2:2003/A1:2009	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
IEC 60079-14:2013	Explosive atmospheres - Part 14: Electrical installations design, selection and erection
IEC 61000-6-4:2006+AMD1:2010 CSV	Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
EN ISO 898-1:2013	Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)
EN 10083-1:2006	Steels for quenching and tempering - Part 1: General technical delivery conditions
EN 60079-14:2014/AC:2016	EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016)
EN 10083-2:2006	Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels
EN 983:1996+A1:2008	Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
EN 954-1 : 1996	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
ISO 12100-1:2003	Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
EN ISO 4871:2009	Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
IEC 61310-1:2007	Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
EN 50015:1998	Electrical apparatus for potentially explosive atmospheres - Oil immersion "o"
EN 1005-3:2002+A1:2008	Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation
EN 50016:2002	Electrical apparatus for potentially explosive atmospheres - Pressurized apparatus "p"
EN 457 : 1992	SAFETY OF MACHINERY - AUDITORY DANGER SIGNALS - GENERAL REQUIREMENTS, DESIGN AND TESTING
EN ISO 11688-1:2009	Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
ISO/TR 11688-2:1998	Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design
EN 61310-1:2008	Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
ISO 12482-1:1995	Cranes Condition monitoring Part 1: General
PREN 14502-1 : DRAFT 2002	CRANES - EQUIPMENT FOR THE LIFTING OF PERSONS - PART 1: SUSPENDED BASKETS
EN 1070 : 1998	SAFETY OF MACHINERY - TERMINOLOGY
IEC 60079-15:2010	Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
ISO 898-1:2013	Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
EN 10113-3 : 1993	HOT ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEELS - DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED STEELS