• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

DIN EN 14125:2013-09

Current
Current

The latest, up-to-date edition.

THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS
Available format(s)

Hardcopy , PDF

Language(s)

English, German

Published date

01-01-2013

National foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Classes and dimensions
5 Physical properties
6 Production control
7 Testing
8 Markings on pipe and fittings
9 Manuals
10 Records
Annex A (informative) - A-deviations
Annex B (informative) - Static Electricity
Bibliography

This standard is included in DIN Handbook 380.

DocumentType
Standard
Pages
34
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Current

Standards Relationship
UNI EN 14125 : 2013 Identical
UNE-EN 14125:2013 Identical
NS EN 14125 : 2013 Identical
SN EN 14125:2013 Identical
NEN EN 14125 : 2013 Identical
NBN EN 14125 : 2013 Identical
BS EN 14125:2013 Identical
NF EN 14125 : 2013 Identical
I.S. EN 14125:2013 Identical
EN 14125:2013 Identical

IEC 60243-1:2013 Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies
EN 13480-6:2017 Metallic industrial piping - Part 6: Additional requirements for buried piping
EN 13160-7:2016 Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets
EN 13480-2:2017 Metallic industrial piping - Part 2: Materials
EN 1555-1:2010 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
EN 1555-3:2010+A1:2012 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings
ISO/IEC Guide 62:1996 General requirements for bodies operating assessment and certification/registration of quality systems
EN 12201-4:2012 Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 4: Valves
EN 61340-5-1:2016/AC:2017-05 ELECTROSTATICS - PART 5-1: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - GENERAL REQUIREMENTS (IEC 61340-5-1:2016/COR1:2017)
DIN IEC 60093 : 1993 METHODS OF TEST FOR INSULATING MATERIALS FOR ELECTRICAL PURPOSES; VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS
EN 13480-4:2017 Metallic industrial piping - Part 4: Fabrication and installation
ISO 1167-2:2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 2: Preparation of pipe test pieces
EN ISO 11306 : 1998 CORROSION OF METALS AND ALLOYS - GUIDELINES FOR EXPOSING AND EVALUATING METALS AND ALLOYS IN SURFACE SEA WATER
EN 12201-3:2011+A1:2012 Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 3: Fittings
EN 13160-2:2016 Leak detection systems - Part 2: Requirements and test/assessment methods for pressure and vacuum systems
IEC 61340-5-1:2016 Electrostatics - Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements
EN 13463-1:2009 Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
EN ISO 16871:2003 Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering (ISO 16871:2003)
EN ISO 1167-2:2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006)
EN ISO 1167-1:2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006)
ISO 1167-4:2007 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 4: Preparation of assemblies
ISO 9080:2012 Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
ISO 17456:2006 Plastics piping systems Multilayer pipes Determination of long-term strength
ISO 11306:1998 Corrosion of metals and alloys Guidelines for exposing and evaluating metals and alloys in surface sea water
EN 13480-1:2017 Metallic industrial piping - Part 1: General
EN ISO 9080:2012 Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2012)
EN 15376:2014 Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods
EN 28510-1:2014 Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 1: 90º peel
EN 2243-2:2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 2: Peel metal-metal
EN 13480-3:2017 Metallic industrial piping - Part 3: Design and calculation
ISO 11922-1:1997 Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series
ISO 11339:2010 Adhesives T-peel test for flexible-to-flexible bonded assemblies
IEC 60093:1980 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
ISO 16871:2003 Plastics piping and ducting systems Plastics pipes and fittings Method for exposure to direct (natural) weathering
EN ISO 1167-4:2007 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 4: Preparation of assemblies (ISO 1167-4:2007)
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
EN 12201-5:2011 Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system
ISO 1167-3:2007 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 3: Preparation of components
EN 1555-4:2011 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves
ISO 8510-2:2006 Adhesives Peel test for a flexible-bonded-to-rigid test specimen assembly Part 2: 180 peel
EN 13636:2004 Cathodic protection of buried metallic tanks and related piping
EN 60243-1:2013 ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES (IEC 60243-1:2013)
ISO 9001:2015 Quality management systems — Requirements
EN 12201-2:2011+A1:2013 Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes
EN 1555-5:2010 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5: Fitness for purpose of the system
EN 12295:1999 Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test method for resistance of joints to pressure cycling
EN 1555-2:2010 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes
ISO 4892-2:2013 Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
IEC 60243-2:2013 Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage
ISO 6259-3:2015 Thermoplastics pipes Determination of tensile properties Part 3: Polyolefin pipes
ISO 8510-1:1990 Adhesives Peel test for a flexible-bonded-to-rigid test specimen assembly Part 1: 90 degree peel
EN 12294:1999 Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum
EN ISO 8510-2:2010 Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 2: 180 degree peel (ISO 8510-2:2006)
EN ISO 11339:2010 Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2010)
EN 12201-1:2011 Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General
EN 13480-5:2017 Metallic industrial piping - Part 5: Inspection and testing
EN 45012 : 1998 GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY SYSTEMS
EN ISO 4892-2:2013 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
EN 60243-2:2014 Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage
EN 13160-1:2016 Leak detection systems - Part 1: General Principles
EN ISO 1167-3:2007 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 3: Preparation of components (ISO 1167-3:2007)
ISO 1817:2015 Rubber, vulcanized or thermoplastic Determination of the effect of liquids
1997/23/EC : 1997 DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT
ISO 1167-1:2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 1: General method

View more information
£113.67
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.