• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

DIN EN 14846:2015-07 (Draft)

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS
Available format(s)

Hardcopy , PDF

Withdrawn date

07-03-2021

Language(s)

German

Published date

01-01-2015

Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Klassifizierung
  4.1 Allgemeines
  4.2 Klassifizierung elektromechanischer Schlösser
       und Schliessbleche
  4.3 Gebrauchskategorie (erste Stelle)
  4.4 Dauerfunktionstüchtigkeit und Belastung der
       Falle (zweite Stelle)
  4.5 Türmasse und Schliesskraft (dritte Stelle)
  4.6 Eignung für die Verwendung an
       Feuerschutz-/Rauchschutztüren (vierte Stelle)
  4.7 Sicherheit (fünfte Stelle)
  4.8 Korrosionsbeständigkeit, Temperatur und
       Luftfeuchtigkeit (sechste Stelle)
  4.9 Schutzwirkung (siebente Stelle)
  4.10 Schutzwirkung - elektrische Funktionsweise
       (achte Stelle)
  4.11 Schutzwirkung - elektrische Manipulation
       (neunte Stelle)
5 Anforderungen
  5.1 Allgemeines
  5.2 Gebrauchskategorie
  5.3 Dauerfunktionstüchtigkeit
  5.4 Türmasse und Schliesskraft
  5.5 Eignung zur Verwendung an
       Feuerschutz-/Rauchschutztüren
  5.6 Sicherheit
  5.7 Korrosionsbeständigkeit, Temperatur und
       Luftfeuchtigkeit
  5.8 Anforderungen an die Schutzwirkung
  5.9 Schutzwirkung - Elektrische
       Wirkungsweise - Zustandsanzeige
  5.10 Schutzwirkung - Elektrische Manipulation
  5.11 Anforderungen an die Produktinformation
6 Prüfverfahren
  6.1 Durchführung der Prüfung
  6.2 Gebrauchskategorie-Prüfungen
  6.3 Dauerfunktionstüchtigkeits-Prüfungen
  6.4 Türmasse und Schliesskraft
  6.5 Feuer-/Rauchwiderstands-Prüfungen
  6.6 Sicherheit
  6.7 Korrosionsbeständigkeit, Temperatur und
       Luftfeuchtigkeit
  6.8 Schutzwirkungs-Prüfungen
  6.9 Schutzwirkung - Anforderungen an die elektrische
       Funktionsweise - Zustandsanzeige
  6.10 Schutzwirkung - Anforderungen hinsichtlich
       elektrischer Manipulation
7 Kennzeichnung
8 Konformitätsbewertung
  8.1 Erstprüfung
  8.2 Probenahme, Prüfung und Konformitätskriterien
  8.3 Werkseigene Produktionskontrolle
  8.4 Periodische Prüfung
  8.5 Jährliche Prüfung
Anhang A (normativ) Feuer-/Rauchschutz-Prüfungsanforderungen
Anhang B (normativ) Auswahl der Prüflinge und Prüfreihenfolge
Anhang C (normativ) Einbau- und Befestigungsanweisungen
Anhang ZA (normativ) Abschnitte dieser Europäischen
          Norm, die Bestimmungen der EG-Bauproduktenrichtlinie
          (89/106/EWG) betreffen
Literaturhinweise

This standard is included in DIN Handbook 253.

DevelopmentNote
Supersedes DIN EN 12209-3. (11/2008) DRAFT 2015 issued in July 2015. (07/2015)
DocumentType
Draft
Pages
196
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Withdrawn
Supersedes

Standards Relationship
EN 14846:2008 Identical

EN 1906:2012 Building hardware - Lever handles and knob furniture - Requirements and test methods
EN 1155:1997/A1:2002/AC:2006 BUILDING HARDWARE - ELECTRICALLY POWERED HOLD-OPEN DEVICES FOR SWING DOORS - REQUIREMENTS AND TEST METHODS
EN 1158:1997/A1:2002/AC:2006 BUILDING HARDWARE - DOOR COORDINATOR DEVICES - REQUIREMENTS AND TEST METHODS
EN 1125:2008 Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes - Requirements and test methods
IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
EN 61000-4-11:2004/A1:2017 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-11: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TESTS (IEC 61000-4-11:2004/A1:2017)
EN 1670:2007/AC:2008 BUILDING HARDWARE - CORROSION RESISTANCE - REQUIREMENTS AND TEST METHODS
EN 1634-3:2004/AC:2006 FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR AND SHUTTER ASSEMBLIES, OPENABLE WINDOWS AND ELEMENTS OF BUILDING HARDWARE - PART 3: SMOKE CONTROL TEST FOR DOOR AND SHUTTER ASSEMBLIES
EN 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
EN 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
IEC 61000-4-11:2004+AMD1:2017 CSV Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
EN 1303:2015 Building hardware - Cylinders for locks - Requirements and test methods
IEC 61000-4-4:2012 RLV Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
EN 61000-4-2:2009 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
EN 12209:2016 Building hardware - Mechanically operated locks and locking plates - Requirements and test methods
EN 61000-4-3 : 2006 AMD 2 2010 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST
EN 12320:2012 Building hardware - Padlocks and padlock fittings - Requirements and test methods
PREN 13637 : DRAFT 2014 BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
IEC 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
ISO 9001:2015 Quality management systems — Requirements
EN 61000-4-4:2012 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST (IEC 61000-4-4:2012)
EN 60335-1:2012/A13:2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
EN 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
IEC 61000-4-29:2000 Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
EN 61000-4-29:2000 Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
EN 179:2008 Building hardware - Emergency exit devices operated by a lever handle or push pad, for use on escape routes - Requirements and test methods
IEC 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)

View more information
£96.05
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.