• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

DIN EN 14934 E : 2007

Current
Current

The latest, up-to-date edition.

THERMAL INSULATION AND LIGHT WEIGHT FILL PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS - FACTORY MADE PRODUCTS OF EXTRUDED POLYSTYRENE FOAM (XPS) - SPECIFICATION
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2007

Foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols, units and abbreviated
  terms
  3.1 Terms and definitions
  3.2 Symbols, units and abbreviated terms
4 Requirements
  4.1 General
  4.2 For all applications
  4.3 For specific applications
5 Test methods
  5.1 Sampling
  5.2 Conditioning
  5.3 Testing
6 Designation code
7 Evaluation of conformity
8 Marking and labelling
Annex A (normative) Determination of the declared values
                    of thermal resistance and thermal
                    conductivity
      A.1 Introduction
      A.2 Input data
      A.3 Declared values
Annex B (normative) Factory Production Control
Annex C (normative) Determination of the aged values of
                    thermal resistance and thermal conductivity
      C.1 Scope
      C.2 Procedure for XPS foam without diffusion tight
          laminates
      C.3 Procedure for XPS foam for use with diffusion
          tight facings on both sides
      C.4 Calculation of aged value
      C.5 Blowing agent
      C.6 Product grouping
Annex D (normative) Determination of behaviour under cyclic
                    square wave load
      D.1 Scope
      D.2 Definitions
      D.3 Principle
      D.4 Testing equipment
      D.5 Test specimens
      D.6 Procedure
      D.7 Calculation and expression of results
      D.8 Accuracy of measurement
      D.9 Test report
Annex E (informative) Additional properties
      E.1 General
      E.2 Compressive modulus of elasticity
      E.3 Determination of volume percentage of open
          and closed cells
      E.4 Determination of shear strength
Annex ZA (informative) Relationship between this European
                       Standard and the Essential Requirements
                       of EU Directive 89/106/EEC, EU
                       Construction Products Directive
      ZA.1 Scope and relevant characteristics
      ZA.2 Procedures for the attestation of conformity of
           extruded polystyrene foam products
      ZA.3 CE Marking and labelling
Bibliography

Describes the requirements for factory made products of extruded polystyrene foam which are used for frost insulation of roads, railways, trafficked areas, light weight fill for reduction of horizontal and vertical earth pressure and other civil engineering applications.

DocumentType
Standard
Pages
52
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Current

Standards Relationship
UNI EN 14934 : 2008 Identical
NS EN 14934 : 1ED 2007 Identical
NBN EN 14934 : 2007 Identical
EN 14934:2007 Identical
I.S. EN 14934:2007 Identical
NF EN 14934 : 2008 Identical
NEN EN 14934 : 2007 Identical
BS EN 14934:2007 Identical

ISO 9229:2007 Thermal insulation Vocabulary
EN 12667:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
EN 1606:2013 Thermal insulating products for building applications - Determination of compressive creep
ISO 12491:1997 Statistical methods for quality control of building materials and components
EN 12939:2000 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance
ISO 1716:2010 Reaction to fire tests for products Determination of the gross heat of combustion (calorific value)
EN ISO 9229:2007 Thermal insulation - Vocabulary (ISO 9229:2007)
EN ISO 4590:2016 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2016)
EN 1605:2013 Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions
EN 824:2013 Thermal insulating products for building applications - Determination of squareness
ISO 4590:2016 Rigid cellular plastics Determination of the volume percentage of open cells and of closed cells
EN 12088:2013 Thermal insulating products for building applications - Determination of long term water absorption by diffusion
ISO 11925-2:2010 Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test
EN ISO 1182:2010 Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010)
EN 825:2013 Thermal insulating products for building applications - Determination of flatness
EN 823:2013 Thermal insulating products for building applications - Determination of thickness
ISO 1182:2010 Reaction to fire tests for products Non-combustibility test
EN 13823:2010+A1:2014 REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM
EN 12087:2013 Thermal insulating products for building applications - Determination of long term water absorption by immersion
EN 13793:2003 Thermal insulating products for building applications - Determination of behaviour under cyclic loading
EN 12090:2013 Thermal insulating products for building applications - Determination of shear behaviour
EN 1604:2013 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
EN 12091:2013 Thermal insulating products for building applications - Determination of freeze-thaw resistance
EN 12089:2013 Thermal insulating products for building applications - Determination of bending behaviour
ISO 11561:1999 Ageing of thermal insulation materials Determination of the long-term change in thermal resistance of closed-cell plastics (accelerated laboratory test methods)
EN 826:2013 Thermal insulating products for building applications - Determination of compression behaviour
EN ISO 1716:2010 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010)
EN ISO 11925-2:2010/AC:2011 REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST
EN 12086:2013 Thermal insulating products for building applications - Determination of water vapour transmission properties
EN 13172:2012 Thermal insulation products - Evaluation of conformity
EN 822:2013 Thermal insulating products for building applications - Determination of length and width

View more information
£108.97
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.