DIN EN 287-1:2011-11
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS
Hardcopy , PDF
01-12-2013
German
01-01-2011
National foreword
National Annex NA (informative) - Bibliography
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Reference numbers, symbols and abbreviated terms
5 Essential variables and range of qualification
6 Examination and testing
7 Acceptance requirements for test pieces
8 Re-tests
9 Period of validity
10 Certificate
11 Designation
Annex A (informative) - Welder's qualification test certificate
Annex B (informative) - Designation examples
Annex C (informative) - Job knowledge
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements
of EC Directive 97/23/EC
Bibliography
This standard is included in DIN DVS Handbook 191.
DevelopmentNote |
Supersedes DIN 8560. (07/2002)
|
DocumentType |
Standard
|
Pages |
44
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
NBN EN 287-1 : 2011 | Identical |
EN 287-1:2011 | Identical |
NF EN 287-1 : 2011 | Identical |
I.S. EN 287-1:2011 | Identical |
SN EN 287-1 : 2011 | Identical |
BS EN 287-1:2011 | Identical |
NS EN 287-1 : 2011 | Identical |
UNI EN 287-1 : 2012 | Identical |
NEN EN 287-1 : 2011 | Identical |
UNE-EN 287-1:2011 | Identical |
BWB TL 4210-0094 : 2ED 1994 | PROPORTIONER, DRY, WITH D-COUPLING (NBC) |
DIN 2827:2006-07 | HOSE ASSEMBLIES OF STAINLESS STEEL FOR CHEMICAL PRODUCTS |
BWB TL 7320-0068 : 1ED 2004 | FELDKUECHENARBEITSTISCHE MIT AUFNAHME FUER GEWUERZBEHAELTER UND KUECHENKLEINGERAET |
BWB TL 7360-0045 : 2ED 2005 | |
BWB TL 4210-0029 : 3ED 1999 | FIRE HOSE NOZZLE FOR LOW-EXPANSION FOAM |
DIN 4099-2:2003-08 | WELDING OF REINFORCING STEEL - PART 2: QUALITY ASSURANCE |
DIN 18800-7:2008-11 | STEEL STRUCTURES - PART 7: EXECUTION AND CONSTRUCTER'S QUALIFICATION |
BWB TL 4210-0119 : 3ED 1995 | FIRE FIGHTING CART, POWDER, PG 50, FIRE CLASSIFICATION A, B, C |
BWB TL 7310-0030 : 1ED 2005 | DRUCKKOCH-/DRUCKBRATKESSEL, CONTAINERKUECHE ISO 20 FUSZ, ZUCON FELDKUECHENCONTAINER ISO 20 FUSZ, RK |
BWB TL 2330-0028 : 3ED 2008 | BUNDESWEHR TRAILER OF THE FOLLOW-ON GENERATION FOR MOTOR VEHICLES, MILITARY VERSION, I.A.W. DRAWING SET |
BWB TL 7320-0072 : 1ED 2005 | |
BWB TL 7360-0022 : 2ED 2004 | BURNER FOR FIELD KITCHEN TRAILER |
BWB TL 4230-0022 : 2ED 2001 | FITTINGS/MANIFOLDS FOR NBC DEFENCE |
BWB TL 7110-0060 : 3ED 2001 | BRACKET FOR FIELD DESK |
BWB TL 3920-0009 : 6ED 2003 | HANDCART, 4 WHEEL, 0,5 T, PLATFORM |
DIN 8563-123:1994-06 (Draft) | QUALITY ASSURANCE OF WELDED STRUCTURES; SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS; WELDING PROCEDURE TEST FOR PIPELINE WELDING ON SITE |
VDI 2083 Blatt 13.3:2010-10 | Cleanroom technology - Quality, production, and distribution of ultrapure water - Pharmacy and other life-science applications |
BWB TL 4210-0099 : 4ED 1998 | POWDER FIRE EXTINGUISHER, 6 KG AND 12 KG, FIRE CLASSIFICATION A, B, C |
BWB TL 4910-0057 : 3ED 2003 | SPECIAL TOOLS, LIFTING BEAM, UNIVERSAL (KIT) |
BWB TL 7360-0031 : 2ED 1998 | FIELD KITCHEN TRAILER, ASSEMBLY |
BWB TL 4210-0113 : 7ED 2002 | |
BWB TL 4210-0013 : 3ED 1995 | CARBON DIOXIDE FIRE FIGHTING CART, 30 KG, FIRE CLASSIFICATION B |
BWB TL 4210-0095 : 3ED 2008 | NOZZLES FOR NBC PROTECTION |
BWB TL 4320-0025 : 2ED 1997 | FUEL PUMPING SYSTEM, 400 L/MIN |
BWB TL 7320-0064 : 2ED 1999 | FIELD KITCHEN WORK TABLE WITH MOUNTING BRACKET FOR FOOD CONTAINER(S) |
DIN 4099-1:2003-08 | WELDING OF REINFORCING STEEL - PART 1: EXECUTION |
BWB TL 4520-0009 : 3ED 2001 | WATER HEATER, 60 L/MIN, 30 DEGREES C, MOBILE |
BWB TL 7310-0013 : 2ED 2001 | PETROLEUM DIESEL COOKER (SINGLE BURNER) |
BWB TL 7105-0082 : 7ED 2005 | |
BWB TL 2510-0014 : 4ED 2008 | FLATBED BODYWORK FOR TWO-WHEELED TRAILERS |
BWB TL 7110-0115 : 1ED 2005 | |
BWB TL 4510-0005 : 2ED 1995 | SHOWER PIPE WITH D COUPLINGS AND 3 CONNECTIONS FOR HAND SHOWER |
DIN 8561 : 1974 | EXAMINATION OF WELDERS FOR WELDING NONFERROUS METALS |
BWB TL 3920-0029 : 1ED 2003 | |
DIN 2303:2007-02 | WELDING AND ALLIED PROCESSES - QUALITY REQUIREMENTS FOR PRODUCTION AND MAINTENANCE COMPANIES FOR MILITARY PRODUCTS |
BWB TL 7320-0058 : 2ED 1998 | FOLDING TABLE, CRNI STEEL, FOR FIELD KITCHENS |
BWB TL 3990-0022 : 4ED 1997 | BRIDGE, LATERAL LOADING |
BWB TL 3990-0033 : 4ED 1994 | LOADING GEAR, KIT FOR PROJECTILE AND PROPELLANT HANDLING |
BWB TL 7240-0022 : 5ED 2003 | MILITARY CAN, 20 LITRE (STEEL CANISTER) |
BWB TL 3990-0030 : 6ED 1996 | LOADING GEAR, PALLET LOADING RAILS, UP TO 2 T, KIT |
BWB TL 2330-0001-001 : 2ED 1995 | TRAILERS FOR MOTOR VEHICLES, COMMERCIAL VERSION - GENERAL CONDITIONS |
BWB TL 4210-0019 : 8ED 2000 | FIRE EXTINGUISHER, POWDER, 6 KG AND 12 KG, FIRE CLASSIFICATION B, C |
BWB TL 4230-0014 : 2ED 1995 | COLLAPSIBLE RACK FOR THE HANGING OF TRANSPORT BAGS FOR CONTAMINATED CLOTHING AND EQUIPMENT |
DIN 6700-2:2001-05 | WELDING OF RAILWAYS VEHICLES AND PARTS - PART 2: QUALIFICATION OF MANUFACTURER OF WELDED ROLLING STOCK MATERIALS; QUALITY ASSURANCE |
DIN V 4133:2007-07 | FREE-STANDING STEEL STACKS |
KTA 3201.3 : 2007(R2012) | COMPONENTS OF THE REACTOR COOLANT PRESSURE BOUNDARY OF LIGHT WATER REACTORS - PART 3: MANUFACTURE |
CEN ISO/TR 20173:2009 | Welding - Grouping systems for materials - American materials (ISO/TR 20173:2009) |
ISO 2553:2013 | Welding and allied processes Symbolic representation on drawings Welded joints |
EN ISO 5817:2014 | Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014) |
ISO 17635:2016 | Non-destructive testing of welds — General rules for metallic materials |
EN 1321:1996 | Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds |
EN ISO 5173:2010/A1:2011 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS (ISO 5173:2009) |
ISO/TR 15608:2017 | Welding Guidelines for a metallic materials grouping system |
ISO 2560:2009 | Welding consumables Covered electrodes for manual metal arc welding of non-alloy and fine grain steels Classification |
EN ISO 6947:2011 | Welding and allied processes - Welding positions (ISO 6947:2011) |
EN ISO 4063:2010 | Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01) |
EN ISO 15609-2:2001/A1:2003 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 2: GAS WELDING |
ISO 5173:2009 | Destructive tests on welds in metallic materials — Bend tests |
DIN ISO 857-1:2002-11 | WELDING AND ALLIED PROCESSES - VOCABULARY - PART 1: METAL WELDING PROCESSES |
ISO 17640:2017 | Non-destructive testing of welds Ultrasonic testing Techniques, testing levels, and assessment |
ISO 5817:2014 | Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
EN ISO 17637:2016 | Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2016) |
ISO/TR 25901:2007 | Welding and related processes Vocabulary |
EN 22553:1994 | Welded, brazed and soldered joints - Symbolic representation on drawings (ISO 2553:1992) |
EN ISO 17635:2016 | Non-destructive testing of welds - General rules for metallic materials (ISO 17635:2016) |
EN ISO 2560:2009 | Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2009) |
CEN ISO/TR 20174:2005 | Welding - Grouping systems for materials - Japanese materials (ISO/TR 20174:2005) |
DIN-Fachbericht ISO/TR 25901:2008-11 | Welding and related processes - Vocabulary |
ISO 857-1:1998 | Welding and allied processes Vocabulary Part 1: Metal welding processes |
ISO 17632:2015 | Welding consumables Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels Classification |
DIN SPEC 1116;DIN-Fachbericht ISO/TR 20173:2010-03 | Welding - Grouping systems for materials - American materials (ISO/TR 20173:2009); German version CEN ISO/TR 20173:2009 |
CEN ISO/TR 15608:2017 | Welding - Guidelines for a metallic materials grouping system (ISO/TR 15608:2017) |
EN ISO 17632:2015 | Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification (ISO 17632:2015) |
ISO 17637:2016 | Non-destructive testing of welds Visual testing of fusion-welded joints |
EN ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004) |
DIN-Fachbericht CEN ISO/TR 20174:2006-09 | Welding - Grouping systems for materials - Japanese materials (ISO/TR 20174:2005); German version CEN ISO/TR 20174:2005 |
DIN SPEC 1097;DIN-Fachbericht CEN ISO/TR 20172:2009-10 | Welding - Grouping systems for materials - European materials (ISO/TR 20172:2009); German version CEN ISO/TR 20172:2009 |
ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
ISO 15609-2:2001 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 2: Gas welding |
ISO 4063:2009 | Welding and allied processes — Nomenclature of processes and reference numbers |
DIN-Fachbericht CEN ISO/TR 15608:2006-01 | WELDING - GUIDELINES FOR A METALLIC MATERIALS GROUPING SYSTEM |
ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
EN 1418:1997 | Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials |
CEN ISO/TR 20172:2009 | Welding - Grouping systems for materials - European materials (ISO/TR 20172:2009) |
EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
EN 1435:1997/A2:2003 | NON-DESTRUCTIVE TESTING OF WELDS - RADIOGRAPHIC TESTING OF WELDED JOINTS |
ISO 6947:2011 | Welding and allied processes Welding positions |
EN ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003) |
EN 1320:1996 | Destructive tests on welds in metallic materials - Fracture test |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.