DIN EN 636:2015-05
Current
The latest, up-to-date edition.
Hardcopy , PDF
English, German
01-01-2015
National foreword
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and subscripts
5 Classification system
6 General requirements
7 Requirements for plywood for use
in dry conditions
8 Requirements for plywood for use
in humid conditions
9 Requirements for plywood for use
in exterior conditions
10 Supplementary properties
11 Verification of compliance
12 Marking, identification and documentation
Annex A (normative) - Supplementary properties
Annex B (informative) - Durability of wood and
wood-based products - Definition of Use
classes of biological attack- Application
to plywood
Bibliography
This standard is included in DIN Handbook 80 and 359.
DevelopmentNote |
Supersedes DIN EN 636-1, -2 and -3. (12/2003)
|
DocumentType |
Standard
|
Pages |
23
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Current
|
Standards | Relationship |
UNE-EN 636:2012 | Identical |
NEN EN 636 : 2012 + A1 2015 | Identical |
EN 636:2012+A1:2015 | Identical |
SN EN 636 : 2012 + A1 2015 | Identical |
NF EN 636 : 2012 + A1 2015 | Identical |
NS EN 636 : 2012 + A1 2015 | Identical |
I.S. EN 636:2012 | Identical |
UNI EN 636 : 2013 | Identical |
NBN EN 636 : 2012 + A1 2015 | Identical |
BS EN 636 : 2012 | Identical |
DIN 68792:2016-08 | LARGE AREA SHUTTERING PANELS OF VENEER PLYWOOD FOR CONCRETE AND REINFORCED CONCRETE |
DIN 4102-4:2016-05 | FIRE BEHAVIOUR OF BUILDING MATERIALS AND BUILDING COMPONENTS - PART 4: SYNOPSIS AND APPLICATION OF CLASSIFIED BUILDING MATERIALS, COMPONENTS AND SPECIAL COMPONENTS |
DIN HDBK 60 : 8ED 2011 | HOLZWERKSTOFFE 1 - HOLZFASERPLATTEN, SPANPLATTEN, OSB, SPERRHOLZ, FURNIERSCHICHTHOLZ, MASSIVHOLZPLATTEN, PANEELE |
DIN 18203-3:2008-08 | TOLERANCES IN BUILDING CONSTRUCTIONS - PART 3: BUILDING COMPONENTS OF WOOD AND DERIVED TIMBER PRODUCTS |
DIN 4109-33:2016-07 | SOUND INSULATION IN BUILDINGS - PART 33: DATA FOR VERIFICATION OF SOUND INSULATION (COMPONENT CATALOGUE) - TIMBER CONSTRUCTION, LIGHTWEIGHT CONSTRUCTION AND DRY WALLING |
DIN 4102-16:2015-09 | Fire behaviour of building materials and building components - Part 16: "Brandschacht" tests |
DIN HDBK 359 : 3ED 2015 | PRODUKTNORMEN FUER DIE HOLZWIRTSCHAFT 1 - NORMEN NACH DER WARENSYSTEMATIK DES HOLZHANDELS - GRUPPEN 1 BIS 3 (SCHNITTHOLZ, HOBELWARE UND PLATTENWERKSTOFFE) FUER DEN HANDEL, DAS HANDWERK UND DIE INDUSTRIE |
DIN HDBK 80 : 11ED 2017 | ZIMMER- UND HOLZBAUARBEITEN VOB/STLB-BAU - VOB TEIL C: ATV DIN 18299, ATV DIN 18334 |
EN 326-3:2003 | Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels |
EN 717-2:1994/AC:2002 | WOOD-BASED PANELS - DETERMINATION OF FORMALDEHYDE RELEASE - PART 2: FORMALDEHYDE RELEASE BY THE GAS ANALYSIS METHOD |
EN 635-2:1995 | Plywood - Classification by surface appearance - Part 2: Hardwood |
CEN/TS 1099:2007 | Plywood - Biological durability - Guidance for the assessment of plywood for use in different use classes |
EN 13986:2004 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
EN 310:1993 | Wood-based panels - Determination of modulus of elasticity in bending and of bending strength |
CEN/TS 13810-2:2003 | Wood-based panels - Floating floors - Part 2: Test methods |
EN 326-1:1994 | Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results |
EN 322:1993 | Wood-based panels - Determination of moisture content |
EN 326-2:2010+A1:2014 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control |
EN 14272:2011 | Plywood - Calculation method for some mechanical properties |
EN 596:1995 | Timber structures - Test methods - Soft body impact test of timber framed walls |
EN 324-1:1993 | Wood-based panels - Determination of dimensions of boards - Part 1: Determination of thickness, width and length |
ENV 1156:1998 | Wood-based panels - Determination of duration of load and creep factors |
EN 1058:2009 | Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values |
EN 1195:1997 | Timber structures - Test methods - Performance of structural floor decking |
EN 717-1:2004 | Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method |
EN 13446:2002 | Wood-based panels - Determination of withdrawal capacity of fasteners |
EN 13810-1:2002 | Wood-based panels - Floating floors - Part 1: Performance specifications and requirements |
EN 789:2004 | Timber structures - Test methods - Determination of mechanical properties of wood based panels |
EN 635-1:1994 | Plywood - Classification by surface appearance - Part 1: General |
EN 594:2011 | Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels |
EN 324-2:1993 | Wood-based panels - Determination of dimensions of boards - Part 2: Determination of squareness and edge straightness |
EN 323:1993 | Wood-based panels - Determination of density |
EN 315:2000 | Plywood - Tolerances for dimensions |
EN 318:2002 | Wood based panels - Determination of dimensional changes associated with changes in relative humidity |
EN 335-3:1995 | Durability of wood and wood-based products - Definition of hazard classes of biological attack - Part 3: Application to wood-based panels |
EN 313-1:1996 | Plywood - Classification and terminology - Part 1: Classification |
EN 313-2:1999 | Plywood - Classification and terminology - Part 2: Terminology |
EN 314-2:1993 | Plywood - Bonding quality - Part 2: Requirements |
EN 1995-1-1:2004/A2:2014 | EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS |
EN 12871:2013 | Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
EN 635-3:1995 | Plywood - Classification by surface appearance - Part 3: Softwood |
CEN/TS 635-4:2007 | Plywood - Classification by surface appearance - Part 4: Parameters of ability for finishing, guideline |
EN 12369-2:2011 | Wood-based panels - Characteristic values for structural design - Part 2: Plywood |
EN 635-5:1999 | Plywood - Classification by surface appearance - Part 5: Methods for measuring and expressing characteristics and defects |
EN 314-1:2004 | Plywood - Bonding quality - Part 1: Test methods |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.