Specifications for installations inside buildings conveying water for human consumption - Part 4: Installation

Available format(s)

Hardcopy , PDF

Language(s)

English, German

Published date

01-06-2010

Publisher

German Institute for Standardisation (Deutsches Institut für Normung)

DocumentType	Standard
Pages	55
PublisherName	German Institute for Standardisation (Deutsches Institut für Normung)
Status	Current

Standards	Relationship
EN 806-4:2010	Identical

DIN 1988-100:2011-08	Codes of practice for drinking water installations - Part 100: Protection of drinking water, drinking water quality control; DVGW code of practice
VDI 6000 Blatt 1:2008-02	Provision and installation of sanitary facilities - Private housing
DIN 1988-200:2012-05	Codes of practice for drinking water installations - Part 200: Installation Type A (closed system) - Planning, components, apparatus, materials; DVGW code of practice
DIN 50930-6:2013-10	Corrosion of metals - Corrosion of metallic materials under corrosion load by water inside of pipes, tanks and apparatus - Part 6: Evaluation process and requirements regarding the hygienic suitability in contact with drinking water

EN 10240:1997	Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants
EN 1514-1:1997	Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts
EN 751-3:1996/AC:1997	Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes
EN 817:2008	Sanitary tapware - Mechanical mixing valves (PN 10) - General technical specifications
EN ISO 7091 : 2000	PLAIN WASHERS - NORMAL SERIES - PRODUCT GRADE C
EN 1254-4:1998/AC:1999	COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 4: FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS
EN 13443-1:2002+A1:2007	Water conditioning equipment inside buildings - Mechanical filters - Part 1: Particle rating 80 µm to 150 µm - Requirements for performances, safety and testing
EN 12502-1 : 2004	PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN WATER DISTRIBUTION AND STORAGE SYSTEMS - PART 1: GENERAL
EN 681-1:1996/A3:2005	ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER
EN 806-1:2000/A1:2001	SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 1: GENERAL
EN ISO 15875-3:2003	Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003)
ISO 15874-3:2013	Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings
EN 1254-5:1998	Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes
ISO 15877-3:2009	Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 3: Fittings
EN 1057:2006+A1:2010	Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
EN ISO 15877-3:2009/A1:2010	PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 3: FITTINGS
ISO 4016:2011	Hexagon head bolts Product grade C
EN 12502-4 : 2004	PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN WATER DISTRIBUTION AND STORAGE SYSTEMS - PART 4: INFLUENCING FACTORS FOR STAINLESS STEELS
ISO 4034:2012	Hexagon regular nuts (style 1) Product grade C
EN ISO 21003-3:2008	Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings (ISO 21003-3:2008)
EN 1254-1:1998	Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes
EN 1254-2:1998	Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes
EN 12502-3 : 2004	PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN WATER DISTRIBUTION AND STORAGE SYSTEMS - PART 3: INFLUENCING FACTORS FOR HOT DIP GALVANISED FERROUS MATERIALS
EN 805:2000	Water supply - Requirements for systems and components outside buildings
EN 10312:2002/A1:2005	WELDED STAINLESS STEEL TUBES FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS
EN 15161:2006	Water conditioning equipment inside buildings - Installation, operation, maintenance and repair
EN 751-2:1996	Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds
EN 1717:2000	Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow
EN ISO 4016:2011	Hexagon head bolts - Product grade C (ISO 4016:2011)
EN 10088-2:2014	STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
ISO 9454-1:2016	Soft soldering fluxes Classification and requirements Part 1: Classification, labelling and packaging
EN 12502-5 : 2004	PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN WATER DISTRIBUTION AND STORAGE SYSTEMS - PART 5: INFLUENCING FACTORS FOR CAST IRON, UNALLOYED AND LOW ALLOYED STEELS
EN ISO 1127:1996	Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992)
EN 1044 : 1999	BRAZING - FILLER METALS
EN ISO 4034:2012/AC:2013	HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C (ISO 4034:2012/COR 1:2013)
EN ISO 228-1:2003	Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
ISO 15876-3:2017	Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 3: Fittings
EN 12502-2 : 2004	PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN WATER DISTRIBUTION AND STORAGE SYSTEMS - PART 2: INFLUENCING FACTORS FOR COPPER AND COPPER ALLOYS
EN ISO 9453:2014	Soft solder alloys - Chemical compositions and forms (ISO 9453:2014)
EN ISO 15876-3:2017	Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO 15876-3:2017)
ISO 7091:2000	Plain washers Normal series Product grade C
EN 29454-1:1993	Soft soldering fluxes - Classification and requirements - Part 1: Classification, labelling and packaging (ISO 9454-1:1990)
EN 806-2:2005	Specification for installations inside buildings conveying water for human consumption - Part 2: Design
EN 751-1:1996	Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds
ISO 9453:2014	Soft solder alloys Chemical compositions and forms
EN 200:2008	Sanitary tapware - Single taps and combination taps for water supply systems of type 1 and type 2 - General technical specification
EN 60335-1:2012/A13:2017	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
ISO 15875-3:2003	Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings
ISO 21003-3:2008	Multilayer piping systems for hot and cold water installations inside buildings — Part 3: Fittings
EN 545:2010	Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
EN 10242:1994/A2:2003	THREADED PIPE FITTING IN MALLEABLE CAST IRON
EN 1111:2017	Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification
ISO 228-1:2000	Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
EN ISO 15874-3:2013	Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2013)
EN 10255:2004+A1:2007	Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions
ISO 1127:1992	Stainless steel tubes Dimensions, tolerances and conventional masses per unit length