• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

DIN EN ISO 12402-7:2015-08 (Draft)

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
Available format(s)

Hardcopy , PDF

Superseded date

07-03-2021

Language(s)

German

Published date

01-01-2015

Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Werkstoffe und Bestandteile
  4.1 Allgemeines
  4.2 Nähgarn
  4.3 Textiles Flächengebilde
  4.4 Gurtband und Zugband
  4.5 Schnürung
  4.6 Reissverschlüsse
  4.7 Beschlagteile
  4.8 Schaumstoff-Auftriebswerkstoff
  4.9 Werkstoffe für aufblasbare Auftriebskammern
  4.10 Beschichtungen aus Polymerschaumstoff
  4.11 Aufblassysteme für vollständig aufblasbare und
       hybride persönliche Auftriebsmittel
  4.12 Gasbehälter
Anhang A (informativ) Beständigkeit von Werkstoffen gegen
         Schimmelbildung: Erdeingrabversuch
Anhang B (informativ) Abriebbeständigkeit von Gewebe:
         Schwingprüfverfahren (Verfahren nach Wyzenbeek)
Anhang C (informativ) Beispiel einer Konstruktionszeichnung
Literaturhinweise

Describes the minimum requirements for construction and performance of materials and components of personal flotation devices as well as relevant test methods.

DevelopmentNote
Supersedes DIN EN 393, DIN EN 395, DIN EN 396 and DIN EN 399. (03/2007) DRAFT 2017 issued in December 2017. (12/2017)
DocumentType
Draft
Pages
187
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Superseded

DIN EN ISO 12401:2010-01 Small craft - Deck safety harness and safety line - Safety requirements and test methods (ISO 12401:2009)
DIN EN ISO 12402-1:2005-12 PERSONAL FLOTATION DEVICES - PART 1: LIFEJACKETS FOR SEAGOING SHIPS - SAFETY REQUIREMENTS
DIN EN ISO 15027-2:2013-03 Immersion suits - Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012)
DIN EN ISO 15027-1:2013-03 Immersion suits - Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012)
DIN EN ISO 12402-6:2006-12 Personal flotation devices - Part 6: Special purpose lifejackets and buoyancy aids - Safety requirements and additional test methods (ISO 12402-6:2006)

DIN 50021:1988-06 SPRAY TESTS WITH DIFFERENT SODIUM CHLORIDE SOLUTIONS
ISO 13934-1:2013 Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method
ISO 4892-1:2016 Plastics Methods of exposure to laboratory light sources Part 1: General guidance
ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
ISO 12402-5:2006 Personal flotation devices Part 5: Buoyancy aids (level 50) Safety requirements
DIN EN ISO 4892-2:2013-06 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
DIN 53508:2000-03 Accelerated ageing of rubber
ISO 13934-2:2014 Textiles Tensile properties of fabrics Part 2: Determination of maximum force using the grab method
ISO 9073-4:1997 Textiles Test methods for nonwovens Part 4: Determination of tear resistance
DIN EN ISO 2411:2016-07 (Draft) RUBBER OR PLASTICS-COATED FABRICS - DETERMINATION OF COATING ADHESION (ISO 2411:2017)
DIN EN 1095:1998-02 DECK SAFETY HARNESS AND SAFETY LINE FOR USE ON RECREATIONAL CRAFT - SAFETY REQUIREMENTS AND TEST METHODS
ISO 6330:2012 Textiles Domestic washing and drying procedures for textile testing
ISO 12402-3:2006 Personal flotation devices Part 3: Lifejackets, performance level 150 Safety requirements
ISO 2411:2017 Rubber- or plastics-coated fabrics — Determination of coating adhesion
ISO 188:2011 Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
DIN EN 20139:1992-09 TEXTILES - STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING
ISO 13938-2:1999 Textiles Bursting properties of fabrics Part 2: Pneumatic method for determination of bursting strength and bursting distension
DIN EN ISO 105-B02:2014-11 TEXTILES - TESTS FOR COLOUR FASTNESS - PART B02: COLOUR FASTNESS TO ARTIFICIAL LIGHT: XENON ARC FADING LAMP TEST (ISO 105-B02:2014)
ISO 12402-1:2005 Personal flotation devices Part 1: Lifejackets for seagoing ships Safety requirements
ISO 2062:2009 Textiles Yarns from packages Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester
ISO 12402-2:2006 Personal flotation devices Part 2: Lifejackets, performance level 275 Safety requirements
DIN EN ISO 9073-4:1997-09 Test methods for nonwovens - Part 4: Determination of tear resistance (ISO 9073-4:1997)
ISO 1926:2009 Rigid cellular plastics Determination of tensile properties
ISO 105-E02:2013 Textiles — Tests for colour fastness — Part E02: Colour fastness to sea water
DIN EN ISO 5470-2:2003-10 Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 2: Martindale abrader (ISO 5470-2:2003)
ISO 5470-2:2003 Rubber- or plastics-coated fabrics Determination of abrasion resistance Part 2: Martindale abrader
ISO 12401:2009 Small craft — Deck safety harness and safety line — Safety requirements and test methods
ISO 7854:1995 Rubber- or plastics-coated fabrics Determination of resistance to damage by flexing
ISO 1302:2002 Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation
ISO 7229:2015 Rubber- or plastics-coated fabrics — Measurement of gas permeability
ISO 12402-6:2006 Personal flotation devices Part 6: Special purpose lifejackets and buoyancy aids Safety requirements and additional test methods
ISO 12402-4:2006 Personal flotation devices Part 4: Lifejackets, performance level 100 Safety requirements
DIN EN ISO 4892-1:2016-10 PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016)
ISO 105-X12:2016 Textiles Tests for colour fastness Part X12: Colour fastness to rubbing
ISO 12402-10:2006 Personal flotation devices Part 10: Selection and application of personal flotation devices and other relevant devices
ISO 3696:1987 Water for analytical laboratory use — Specification and test methods
ISO 9227:2017 Corrosion tests in artificial atmospheres — Salt spray tests
ISO 4892-2:2013 Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
DIN EN ISO 105-E02:2013-06 TEXTILES - TESTS FOR COLOUR FASTNESS - PART E02: COLOUR FASTNESS TO SEA WATER (ISO 105-E02:2013)
ISO 139:2005 Textiles Standard atmospheres for conditioning and testing
ISO 1421:2016 Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break
DIN EN ISO 4674-1:2015-04 (Draft) RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF TEAR RESISTANCE - PART 1: CONSTANT RATE OF TEAR METHODS (ISO 4674-1:2016)
ISO 105-A02:1993 Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour
ISO 12947-2:2016 Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown
ISO 13938-1:1999 Textiles Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension
DIN EN ISO 2062:2010-04 Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester (ISO 2062:2009)
DIN EN 20105-A02:1994-10 TEXTILES - TESTS FOR COLOUR FASTNESS - PART A02: GREY SCALE FOR ASSESSING CHANGE IN COLOUR
ISO 4674-1:2016 Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methods
ASTM D 471 : 2016-02 TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS
ISO 105-B02:2014 Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
EN 10088-1:2014 Stainless steels - Part 1: List of stainless steels

View more information
£149.85
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.