DIN EN ISO 18265:2014-02
Current
The latest, up-to-date edition.
METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013)
Hardcopy , PDF
German, English
01-02-2014
National foreword
National Annex NA (informative) - Bibliography
Foreword
Introduction
1 Scope
2 Principles of conversion
3 Application of conversion tables
Annex A (informative) - Conversion table for unalloyed, low
alloy steels and cast steel
Annex B (informative) - Conversion tables for steels for
quenching and tempering
Annex C (informative) - Conversion tables for steels for
cold working
Annex D (informative) - Conversion tables for high speed steels
Annex E (informative) - Conversion tables for hardmetals
Annex F (informative) - Conversion tables for non-ferrous
metals and alloys
Annex G (informative) - Conversion tables for tool steels
Annex H (informative) - Remarks on the effect of the changed
test conditions
Bibliography
This standard is included in DIN HDBK 218, 14, 262 and 46.
DevelopmentNote |
Supersedes DIN 50150 (02/2004)
|
DocumentType |
Standard
|
Pages |
90
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Current
|
Supersedes |
Standards | Relationship |
NBN EN ISO 18265 : 2013 | Identical |
NEN EN ISO 18265 : 2013 | Identical |
SN EN ISO 18265:2013 | Identical |
EN ISO 18265:2013 | Identical |
BS EN ISO 18265:2013 | Identical |
I.S. EN ISO 18265:2013 | Identical |
UNE-EN ISO 18265:2014 | Identical |
NF EN ISO 18265 : 2013 | Identical |
NS EN ISO 18265 : 2013 | Identical |
UNI EN ISO 18265 : 2014 | Identical |
ISO 18265:2013 | Identical |
BS EN ISO 16859-1:2015 | Metallic materials. Leeb hardness test Test method |
UNE-EN ISO 16859-1:2016 | Metallic materials - Leeb hardness test - Part 1: Test method (ISO 16859-1:2015) |
DIN HDBK 218 : 6ED 2014 | |
DIN EN ISO 19715:2016-03 (Draft) | DENTISTRY - FILLING INSTRUMENT WITH CONTRA ANGLE (ISO 19715:2017) |
VDI 3388:2012-03 | Materials for trimming and forming dies |
VDI/VDE 2616 Blatt 1:2012-08 | Hardness testing of metallic materials |
VDI 2737 : 2016 COR 2018 | CALCULATION OF THE LOAD CAPACITY OF THE TOOTH ROOT IN INTERNAL TOOTHINGS WITH INFLUENCE OF THE GEAR RIM |
VDI 3405 Blatt 2:2013-08 | Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing |
DIN 6799:2017-06 | RETAINING WASHERS FOR SHAFTS |
DIN ISO 29262:2013-03 | Production equipment for microsystems - Interface between end effector and handling system (ISO 29262:2011) |
DIN 743-3:2012-12 | CALCULATION OF LOAD CAPACITY OF SHAFTS AND AXLES - PART 3: STRENGTH OF MATERIALS |
DIN EN ISO 16859-1:2016-02 | METALLIC MATERIALS - LEEB HARDNESS TEST - PART 1: TEST METHOD (ISO 16859-1:2015) |
DIN HDBK 262 : 5ED 2014 | |
DIN EN ISO 14713-3:2010-05 | ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 3: SHERARDIZING (ISO 14713-3:2017) |
I.S. EN ISO 16859-1:2015 | METALLIC MATERIALS - LEEB HARDNESS TEST - PART 1: TEST METHOD (ISO 16859-1:2015) |
13/30263150 DC : 0 | BS EN ISO 16859-1 - METALLIC MATERIALS - LEEB HARDNESS TEST - PART 1: TEST METHOD |
DIN HDBK 46 : 10ED 2016 | |
DIN HDBK 14 : 12ED 2016 | |
ISO 16859-1:2015 | Metallic materials — Leeb hardness test — Part 1: Test method |
EN ISO 16859-1:2015 | Metallic materials - Leeb hardness test - Part 1: Test method (ISO 16859-1:2015) |
DIN EN ISO 6506-1:2015-02 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 1: TEST METHOD (ISO 6506-1:2014) |
ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
DIN EN ISO 6507-1:2016-08 (Draft) | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 1: TEST METHOD |
ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
ISO 6507-2:2005 | Metallic materials Vickers hardness test Part 2: Verification and calibration of testing machines |
ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
ISO 4957:1999 | Tool steels |
DIN EN ISO 7500-1:2016-05 | METALLIC MATERIALS - CALIBRATION AND VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION TESTING MACHINES - CALIBRATION AND VERIFICATION OF THE FORCE-MEASURING SYSTEM (ISO 7500-1:2015) |
DIN EN ISO 6506-1:2015-02 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 1: TEST METHOD (ISO 6506-1:2014) |
DIN EN ISO 6508-2:2015-06 | Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015); German version EN ISO 6508-2:2015 |
DIN EN ISO 6892-1:2017-02 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT ROOM TEMPERATURE (ISO 6892-1:2016) |
ISO 9513:2012 | Metallic materials — Calibration of extensometer systems used in uniaxial testing |
ISO 6508-2:2015 | Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters |
DIN EN ISO 9513:2013-05 | Metallic materials - Calibration of extensometer systems used in uniaxial testing (ISO 9513:2012 + Cor. 1:2013) |
ISO 4964:1984 | Steel Hardness conversions |
DIN EN ISO 6507-2:2016-08 (Draft) | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6507-2:2005) |
EN 10083-1:2006 | Steels for quenching and tempering - Part 1: General technical delivery conditions |
DIN EN ISO 6508-1:2016-12 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016); German version EN ISO 6508-1:2016 |
ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
ISO/TR 10108:1989 | Steel Conversion of hardness values to tensile strength values |
DIN 17200:1987-03 | STEELS FOR QUENCHING AND TEMPERING - TECHNICAL DELIVERY CONDITIONS |
DIN EN ISO 4957:2001-02 | TOOL STEELS |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.