|
DIN EN ISO 13479:2010-01
|
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (ISO 13479:2009)
|
|
DIN EN ISO 1167-1:2006-05
|
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006)
|
|
DIN EN ISO 9080:2013-02
|
PLASTICS PIPING AND DUCTING SYSTEMS - DETERMINATION OF THE LONG-TERM HYDROSTATIC STRENGTH OF THERMOPLASTICS MATERIALS IN PIPE FORM BY EXTRAPOLATION (ISO 9080:2012)
|
|
ISO 22314:2006
|
Plastics — Glass-fibre-reinforced products — Determination of fibre length
|
|
DIN EN ISO 1167-2:2006-05
|
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006)
|
|
ISO 13953:2001
|
Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
|
|
DIN EN ISO 6259-1:2015-08
|
THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL TEST METHOD (ISO 6259-1:2015)
|
|
DIN EN 12201-1:2011-11
|
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General
|
|
ISO 6964:1986
|
Polyolefin pipes and fittings Determination of carbon black content by calcination and pyrolysis Test method and basic specification
|
|
DIN EN 637:1994-08
|
Plastics piping systems - Glass-reinforced plastics components - Determination of the amounts of constituents using the gravimetric method; German version EN 637:1994
|
|
ISO 3:1973
|
Preferred numbers Series of preferred numbers
|
|
ISO 18553:2002
|
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
|
|
DIN EN ISO 3344:1997-08
|
REINFORCEMENT PRODUCTS - DETERMINATION OF MOISTURE CONTENT
|
|
DIN EN ISO 1183-1:2013-04
|
PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD (ISO 1183-1:2012)
|
|
ISO 11414:2009
|
Plastics pipes and fittings Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
|
|
DIN EN ISO 15512:2016-06 (Draft)
|
PLASTICS - DETERMINATION OF WATER CONTENT (ISO 15512:2016)
|
|
DIN EN ISO 2078:2016-05
|
Textile glass - Yarns - Designation (ISO 2078:1993 + Amd 1:2015) (includes Amendment :2015)
|
|
DIN EN ISO 16871:2003-12
|
PLASTICS PIPING AND DUCTING SYSTEMS - PLASTICS PIPES AND FITTINGS - METHOD FOR EXPOSURE TO DIRECT (NATURAL) WEATHERING
|
|
ISO 1887:2014
|
Textile glass Determination of combustible-matter content
|
|
ISO 11357-6:2008
|
Plastics Differential scanning calorimetry (DSC) Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
|
|
DIN EN ISO 9969:2016-06
|
THERMOPLASTICS PIPES - DETERMINATION OF RING STIFFNESS (ISO 9969:2016)
|
|
ISO 4065:1996
|
Thermoplastics pipes Universal wall thickness table
|
|
DIN EN 12814-3:2014-07
|
TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 3: TENSILE CREEP TEST
|
|
ISO 497:1973
|
Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers
|
|
ISO 13761:2017
|
Plastics pipes and fittings — Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C
|
|
DIN EN ISO 13967:2010-04
|
Thermoplastics fittings - Determination of ring stiffness (ISO 13967:2009)
|
|
ISO 1888:2006
|
Textile glass Staple fibres or filaments Determination of average diameter
|
|
ISO 6259-3:2015
|
Thermoplastics pipes Determination of tensile properties Part 3: Polyolefin pipes
|
|
DIN EN ISO 12162:2010-04
|
Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient (ISO 12162:2009)
|
|
DIN EN ISO 1133:2005-09
|
PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS
|
