EN 10027-2:2015
Current
Current
The latest, up-to-date edition.
DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
Published date
29-04-2015
Publisher
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Principles
5 Structure of steel numbers
Annex A (normative) - Provisions and procedures for
the allocation of steel numbers
Annex B (normative) - Guidance for completing forms I and II
This European Standard sets out a numbering system, referred to as steel numbers, for the designation of steel grades.
| Committee |
SC 12
|
| DevelopmentNote |
Supersedes NS 10000 (07/2004) Supersedes PREN 10027-2. (05/2015)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| PN EN 10027-2 : 2015 | Identical |
| NS EN 10027-2 : 1992 | Identical |
| NEN EN 10027-2 : 2015 | Identical |
| SN EN 10027-2 : 2015 | Identical |
| UNI EN 10027-2 : 1993 | Identical |
| BS EN 10027-2:2015 | Identical |
| UNE-EN 10027-2:2016 | Identical |
| NBN EN 10027-2 : 2015 | Identical |
| I.S. EN 10027-2:2015 | Identical |
| NF EN 10027-2 : 2015 | Identical |
| DIN EN 10027-2:2015-07 | Identical |
| UNI EN 10027-2:2015 | Identical |
| NBN EN 10083-1 : 2007 | Corresponds |
| 11/30239491 DC : 0 | BS EN 10149-1 - HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL DELIVERY CONDITIONS |
| UNE-EN 14811:2007 | Railway applications - Track - Special purpose rail - Grooved and associated construction |
| UNE-EN 10088-5:2010 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
| UNE-EN 10343:2010 | Steels for quenching and tempering for construction purposes - Technical delivery conditions |
| BS ISO 11972:2015 | Corrosion-resistant cast steels for general applications |
| BS EN 10253-2:2007 | Butt-welding pipe fittings Non alloy and ferritic alloy steels with specific inspection requirements |
| 08/30180856 DC : DRAFT JUNE 2008 | BS EN 10270-3 - STEEL WIRE FOR MECHANICAL SPRINGS - PART 3: STAINLESS SPRING STEEL WIRE |
| DIN EN 10152:2009-07 | ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10338:2015-10 | Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions |
| PREN 10217-6 : DRAFT 2009 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| CEI EN 50216-9 : 2010 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 9: OIL-TO-WATER HEAT EXCHANGERS |
| I.S. EN 10169-2:2006 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 2: PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS |
| UNE-EN 1563:2012 | Founding - Spheroidal graphite cast irons |
| I.S. EN 10016-1:1995 | NON-ALLOY STEEL ROD FOR DRAWING AND/OR COLD ROLLING - PART 1: GENERAL REQUIREMENTS |
| BS ISO 4991:2015 | Steel castings for pressure purposes |
| 11/30239476 DC : 0 | BS EN 10025-2 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
| 09/30207517 DC : 0 | BS EN 10217-6 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| BS EN 10294-2:2012 | Hollow bars for machining. Technical delivery conditions Stainless steels with specified machinability properties |
| 12/30259226 DC : 0 | BS EN 10107 - GRAIN-ORIENTED ELECTRICAL STEEL STRIP AND SHEET DELIVERED IN THE FULLY PROCESSED STATE |
| 17/30346738 DC : 0 | BS EN 10225-2 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 2: SECTIONS |
| I.S. EN 10341:2006 | COLD ROLLED ELECTRICAL NON-ALLOY AND ALLOY STEEL SHEET AND STRIP DELIVERED IN THE SEMI-PROCESSED STATE |
| I.S. EN 10126:1996 | COLD ROLLED ELECTRICAL NON-ALLOYED STEEL SHEET AND STRIP DELIVERED IN THE SEMI-PROCESSED STATE |
| I.S. EN 10292:2007 | CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STEELS WITH HIGHER YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| PREN 10207 : DRAFT 2015 | STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS |
| BS EN 10088-5:2009 | Stainless steels Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
| API 5L REDLINE : 2007 | SPECIFICATION FOR LINE PIPE |
| DIN EN 10027-1:2016-02 (Draft) | DESIGNATION SYSTEMS FOR STEELS - PART 1: STEEL NAMES |
| BS EN ISO 27627:2014 | Petroleum and natural gas industries. Aluminium alloy drill pipe thread connection gauging |
| 04/100723 DC : DRAFT JAN 2004 | EN 10213 - STEEL CASTINGS FOR PRESSURE PURPOSES |
| DIN EN 15583-2:2012-05 | Winter maintenance equipment - Snow ploughs - Part 2: Testing criteria and their requirements |
| 16/30332611 DC : DRAFT JAN 2016 | BS EN 10219-1 - COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 1: GENERAL |
| DIN EN 13674-4:2016-05 (Draft) | RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
| I.S. EN 10025-2:2004 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
| 08/30190326 DC : DRAFT DEC 2008 | BS EN 10225 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
| 13/30247437 DC : 0 | BS EN ISO 683-17 - HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO/DIS 683-17:2013) |
| EN 10085:2001 | Nitriding steels - Technical delivery conditions |
| 15/30325000 DC : 0 | BS EN 10305-5 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES |
| PREN 15250 : DRAFT 2012 | SLOW HEAT RELEASE APPLIANCES FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| BS ISO 14737:2015 | Carbon and low alloy cast steels for general applications |
| 04/30123995 DC : DRAFT OCT 2004 | EN 50216-10 - POWER TRANSFORMER AND REACTOR FITTINGS - PART 10: OIL-TO-AIR HEAT EXCHANGERS |
| 16/30338096 DC : 0 | BS EN 303-1 - HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING |
| BS EN 50216-10:2009 | Power transformer and reactor fittings Oil-to-air heat exchangers |
| 09/30207508 DC : 0 | BS EN 10217-3 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| 13/30280398 DC : 0 | BS EN 10338 - HOT ROLLED AND COLD ROLLED NON-COATED FLAT PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| 10/30201497 DC : 0 | BS EN 10305-4 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| PREN 14811 : DRAFT 2016 | RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GRVED AND ASSOCIATED CONSTRUCTION |
| BS EN 10343:2009 | Steels for quenching and tempering for construction purposes. Technical delivery conditions |
| 11/30239488 DC : 0 | BS EN 10025-6 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN QUENCHED AND TEMPERED CONDITIONS |
| DIN EN 10025-4:2011-04 (Draft) | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
| PREN 10225-4 : DRAFT 2017 | WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
| 04/30123264 DC : DRAFT OCT 2004 | EN 10341 - COLD ROLLED ELECTRICAL NON-ALLOY AND ALLOY STEEL SHEET AND STRIP DELIVERED IN THE SEMI-PROCESSED STATE |
| 06/30148769 DC : 0 | EN 10249-1 - COLD FORMED STEEL SHEET PILING - PART 1: TECHNICAL DELIVERY CONDITIONS |
| DIN EN 14811:2016-08 (Draft) | RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
| PREN 10208-3 : DRAFT 1997 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
| BS EN 10253-4:2008 | Butt-welding pipe fittings Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements |
| I.S. EN 10217-3:2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| DIN EN ISO 3183:2013-03 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
| PREN 303-1 : DRAFT 2016 | HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING |
| I.S. EN 10169:2010 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| S.R. CR 12172:1995 | NUMERICAL DESIGNATION SYSTEMS OF METALLIC MATERIALS - REVIEW OF EXISTING SYSTEMS AND RECOMMENDATION FOR NEW SYSTEMS |
| PREN 10120 : DRAFT 2014 | STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS |
| PREN 10025-5 : DRAFT 2011 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
| I.S. EN 1090-2:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| I.S. EN 10217-6:2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| I.S. EN ISO 4957:2000 | TOOL STEELS |
| 16/30258515 DC : 0 | BS EN 13674-4 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
| PREN 10028-1 : DRAFT 2014 | FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| DIN EN 14811 E : 2010 | RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
| BS EN 10217-4:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Electric welded non-alloy steel tubes with specified low temperature properties |
| 16/30332605 DC : 0 | BS EN 10210-1 - HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 1: GENERAL |
| BS EN 10217-5:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties |
| EN 10025-6:2004+A1:2009 | Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition |
| EN 10217-5:2002/A1:2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| EN 10132-1:2000 | Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 1: General |
| I.S. EN 10088-5:2009 | STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| ISO 4991:2015 | Steel castings for pressure purposes |
| I.S. EN 10216-2:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| EN 10222-1:2017 | Steel forgings for pressure purposes - Part 1: General requirements for open die forgings |
| BS EN 10216-2:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified elevated temperature properties |
| DIN EN 10208-1:2009-07 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
| BS EN 10025-5:2004 | Hot rolled products of structual steels Technical delivery conditons for structural steels with improved atmospheric corrosion resistance |
| BS EN 10154:2002 | Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet. Technical delivery conditions |
| BS EN 10250-1:1999 | Open steel die forgings for general engineering purposes General requirements |
| BS EN 10095 : 1999-07 | HEAT RESISTING STEELS AND NICKEL ALLOYS |
| BS EN 13835:2012 | Founding. Austenitic cast irons |
| UNE-EN 10107:2014 | Grain-oriented electrical steel strip and sheet delivered in the fully processed state |
| BS EN 10113-1:1993 | Hot-rolled products in weldable fine grain structural steels General delivery conditions |
| BS EN 10025-2:2004 | Hot rolled products of structural steels Technical delivery conditions for non-alloy structural steels |
| UNE-EN 10272:2016 | Stainless steel bars for pressure purposes |
| UNE-EN 1559-1:2011 | Founding - Technical conditions of delivery - Part 1: General |
| BS EN 10089:2002 | Hot rolled steels for quenched and tempered springs. Technical delivery conditions |
| BS EN 10111:2008 | Continuously hot rolled low carbon steel sheet and strip for cold forming. Technical delivery conditions |
| BS EN 12809 : 2001 | RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS |
| BS EN 10214:1995 | Continuously hot-dip zinc-aluminium (ZA) coated steel strip and sheet. Technical delivery conditions |
| BS EN 10305-2:2016 | Steel tubes for precision applications. Technical delivery conditions Welded cold drawn tubes |
| BS EN 39:2001 | Loose steel tubes for tube and coupler scaffolds. Technical delivery conditions |
| BS EN 10341:2006 | Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state |
| BS EN 303-5:2012 | Heating boilers Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW. Terminology, requirements, testing and marking |
| BS EN 10205:2016 | Cold reduced tinmill products. Blackplate |
| BS EN 10272:2007 | Stainless steel bars for pressure purposes |
| UNE-EN 1754:2015 | Magnesium and magnesium alloys - Designation system for anodes, ingots and castings - Material symbols and material numbers |
| DIN EN 10296-1 E : 2004 | WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY AND ALLOY STEEL TUBES |
| UNE-EN 10106:2016 | Cold rolled non-oriented electrical steel strip and sheet delivered in the fully processed state |
| BS EN 10025-3:2004 | Hot rolled products of structural steels Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels |
| DIN EN 10305-1:2016-08 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES |
| BS EN 10249-1:1996 | Cold formed sheet piling of non alloy steels Technical delivery conditions |
| BS EN 1559-1:2011 | Founding. Technical conditions of delivery General |
| BS EN 1993-5:2007 | Eurocode 3. Design of steel structures Piling |
| I.S. EN 10084:2008 | CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10083-2:2006-10 | STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOY STEELS |
| DIN EN 1562:2012-05 | FOUNDING - MALLEABLE CAST IRONS |
| I.S. EN 10305-2:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES |
| I.S. EN 10216-4:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| I.S. EN 10120:2017 | STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS |
| I.S. EN 10222-1:2017 | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS FOR OPEN DIE FORGINGS |
| I.S. EN 10106:2015 | COLD ROLLED NON-ORIENTED ELECTRICAL STEEL SHEET AND STRIP DELIVERED IN THE FULLY PROCESSED STATE |
| DIN EN 1560:2011-05 | Founding - Designation system for cast iron - Material symbols and material numbers |
| EN 10149-1:2013 | Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions |
| EN 10327:2004 | Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions |
| EN 10297-1:2003 | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| DIN EN 10025-5:2005-02 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
| EN 10277-1:2008 | Bright steel products - Technical delivery conditions - Part 1: General |
| EN 10305-3:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes |
| EN 10248-1:1995 | Hot rolled sheet piling of non alloy steels - Part 1: Technical delivery conditions |
| EN 10253-4:2008/AC:2009 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| EN 10113-2 : 1993 | HOT-ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEELS - DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED STEELS |
| EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| EN 10113-3 : 1993 | HOT ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEELS - DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED STEELS |
| EN 10224:2002/A1:2005 | NON-ALLOY STEEL TUBES AND FITTINGS FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS |
| EN 10209:2013 | Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions |
| EN 10263-1:2017 | Steel rod, bars and wire for cold heading and cold extrusion - Part 1: General technical delivery conditions |
| EN 10216-1:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
| EN 10273:2016 | Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
| EN 10268:2006+A1:2013 | COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| EN 10088-3:2014 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| EN 10271:1998 | Electrolytically zinc-nickel (ZN) coated steel flat products - Technical delivery conditions |
| EN 10296-1:2003 | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
| EN 10120:2017 | Steel sheet and strip for welded gas cylinders |
| DIN ISO 23013:2017-10 | ROAD VEHICLES - DETERMINATION OF RESISTANCE TO FORCED ENTRY OF SECURITY GLASS CONSTRUCTIONS USED IN VEHICLE GLAZING - TEST OF GLAZING SYSTEMS (ISO 23013:2016) |
| EN 10219-1:2006 | Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
| EN 10088-4:2009 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| EN 12438:2017 | Magnesium and magnesium alloys - Magnesium alloys for cast anodes |
| EN 10249-1:1995 | Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions |
| DIN EN 14811:2019-06 | Railway applications - Track - Special purpose rail - Grooved rails and associated construction profiles; German version EN 14811:2019 |
| EN 12421:2017 | Magnesium and magnesium alloys - Unalloyed magnesium |
| EN 10210-1:2006 | Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
| EN 10272:2016 | Stainless steel bars for pressure purposes |
| DIN EN 10292:2007-06 | CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STEELS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| EN 10312:2002/A1:2005 | WELDED STAINLESS STEEL TUBES FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS |
| EN 10269:2013 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| EN 10305-5:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes |
| EN 10169-2:2006 | Continuously organic coated (coil coated) steel flat products - Part 2: Products for building exterior applications |
| EN 10025-1:2004 | Hot rolled products of structural steels - Part 1: General technical delivery conditions |
| EN 10294-1:2005 | Hollow bars for machining - Technical delivery conditions - Part 1: Non alloy and alloy steels |
| EN 10208-1:2009 | Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 1: Pipes of requirement class A |
| EN 10169-3:2003 | Continuously organic coated (coil coated) steel flat products - Part 3: Products for building interior applications |
| EN 10297-2:2005/AC:2007 | SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL |
| EN 10152:2017 | Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions |
| EN 10305-2:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes |
| EN 10147 : 2000 | CONTINUOUSLY HOT-DIP ZINC COATED STRUCTURAL STEELS SHEET AND STRIP - TECHNICAL DELIVERY CONDITIONS |
| EN 10253-3:2008 | Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements |
| EN 12809:2001/A1:2004/AC:2007 | RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS |
| EN 10326:2004 | Continuously hot-dip coated strip and sheet of structural steels - Technical delivery conditions |
| EN 10305-6:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
| EN 10296-2:2005/AC:2007 | WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL |
| DIN EN 10025-4:2005-02 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
| EN 10130:2006 | Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions |
| I.S. EN 12284:2003 | REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING |
| DIN EN 10205:2017-03 | COLD REDUCED TINMILL PRODUCTS - BLACKPLATE |
| DIN EN 14965:2006-03 | Inland navigation vessels - Flat bollards; German version EN 14965:2005 |
| DIN EN 10025-6:2009-08 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION |
| DIN EN 1090-2:2011-10 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN 10107:2014 | Grain-oriented electrical steel strip and sheet delivered in the fully processed state |
| EN 10205:2016 | Cold reduced tinmill products - Blackplate |
| EN 10292:2007 | Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming - Technical delivery conditions |
| EN 10207:2017 | Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars |
| EN 10213-1 : 1995 | TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 1: GENERAL |
| EN 10090:1998 | Valve steels and alloys for internal combustion engines |
| EN 10016-1:1994 | Non-alloy steel rod for drawing and/or cold rolling - Part 1: General requirements |
| EN 13229:2001/A2:2004/AC:2007 | INSET APPLIANCES INCLUDING OPEN FIRES FIRED BY SOLID FUELS - REQUIREMENTS AND TEST METHODS |
| EN 10214 : 1995 | CONTINUOUSLY HOT-DIP ZINC-ALUMINIUM (ZA) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
| CR 10260 : 1998 | DESIGNATION SYSTEMS FOR STEEL - ADDITIONAL SYMBOLS |
| EN 10169:2010+A1:2012 | Continuously organic coated (coil coated) steel flat products - Technical delivery conditions |
| EN 10083-2:2006 | Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels |
| EN 10165 : 1995 | COLD ROLLED ELECTRICAL ALLOYED STEEL SHEET AND STRIP DELIVERED IN THE SEMI-PROCESSED STATE |
| EN 10111:2008 | Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions |
| EN 10265:1995 | Magnetic materials - Specification for steel sheet and strip with specified mechanical properties and magnetic permeability |
| ONORM EN 12809 : 2006 | RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS |
| ONORM EN 14785 : 2006 | RESIDENTIAL SPACE HEATING APPLIANCES FIRED BY WOOD PELLETS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 10248-1:1996 | HOT ROLLED SHEET PILING OF NON ALLOY STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| PREN 10025-3 : DRAFT 2011 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
| UNI EN 15583-2 : 2012 | WINTER MAINTENANCE EQUIPMENT - SNOW PLOUGHS - PART 2: TESTING CRITERIA AND THEIR REQUIREMENTS |
| 02/713774 DC : DRAFT DEC 2002 | EN 10336 - CONTINUOUSLY HOT-DIP COATED AND ELECTROLYTICALLY COATED STRIP AND SHEET OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| 04/30125076 DC : 0 | EN 10111 - CONTINUOUSLY HOT ROLLED LOW CARBON STEEL SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| 96/700629 DC : DRAFT JAN 1996 | PREN 12284 REFRIGERATION SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING |
| BIS IS/ISO 3183 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| BS EN 10217-1:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties |
| I.S. EN 10165:1996 | COLD ROLLED ELECTRICAL ALLOYED STEEL SHEET AND STRIP DELIVERED IN THE SEMI-PROCESSED STATE |
| I.S. EN 10208-2:2009 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
| DIN EN 10253-2:2008-09 | Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
| DIN ISO 23013 E : 2017 | ROAD VEHICLES - DETERMINATION OF RESISTANCE TO FORCED ENTRY OF SECURITY GLASS CONSTRUCTIONS USED IN VEHICLE GLAZING - TEST OF GLAZING SYSTEMS (ISO 23013:2016) |
| 13/30280395 DC : 0 | BS EN 10346 - CONTINUOUSLY HOT-DIP COATED STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10213:2007 | STEEL CASTINGS FOR PRESSURE PURPOSES |
| API 5L RUSSIAN : 2012 | SPECIFICATION FOR LINE PIPE |
| 09/30200834 DC : 0 | BS EN 1559-1 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
| 11/30235688 DC : 0 | BS EN 13240 - ROOM HEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| I.S. EN 1993-5:2007 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 5: PILING (INCLUDING IRISH NATIONAL ANNEX) |
| UNI EN 1562 : 2012 | FOUNDING - MALLEABLE CAST IRONS |
| 12/30270633 DC : 0 | BS EN 10222-1 - STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| 16/30314754 DC : DRAFT JAN 2016 | BS EN 10027-1 - DESIGNATION SYSTEMS FOR STEELS - PART 1: STEEL NAMES |
| I.S. EN 13229:2001 | INSET APPLIANCES INCLUDING OPEN FIRES FIRED BY SOLID FUELS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 10213-1:1996 | TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 1: GENERAL |
| 11/30239494 DC : 0 | BS EN 10149-2 - HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 2: DELIVERY CONDITIONS FOR THERMOMECHANICALLY ROLLED STEELS |
| DIN EN 10025-6:2011-04 (Draft) | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION |
| 11/30253751 DC : 0 | BS EN 10269 - STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
| BS EN 1563:2011 | Founding. Spheroidal graphite cast irons |
| PREN 12438 : DRAFT 2015 | MAGNESIUM AND MAGNESIUM ALLOYS - MAGNESIUM ALLOYS FOR CAST ANODES |
| PREN 10219-1 : DRAFT 2016 | COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 1: GENERAL |
| 15/30327671 DC : 0 | BS EN 10152 - ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| 98/712789 DC : DRAFT AUG 98 | PREN 10302 - CREEP RESISTING STEELS, NICKEL AND COBALT ALLOYS |
| UNI EN 10217-7 : 2014 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
| 15/30324994 DC : 0 | BS EN 10305-3 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 3: WELDED COLD SIZED TUBES |
| 11/30239473 DC : 0 | BS EN 10025-1 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| 07/30127452 DC : DRAFT AUG 2007 | BS ISO 13628-5 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 5: SUBSEA UMBILICALS |
| 11/30235685 DC : 0 | BS EN 13229 - INSET APPLIANCES INCLUDING OPEN FIRES FIRED BY SOLID FUELS - REQUIREMENTS AND TEST METHODS |
| PREN 13674-1 : DRAFT 2009 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| PREN 10139 : DRAFT 2013 | COLD ROLLED UNCOATED MILD STEEL NARROW STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| DIN ISO 23013:2016-10 (Draft) | ROAD VEHICLES - DETERMINATION OF RESISTANCE TO FORCED ENTRY OF SECURITY GLASS CONSTRUCTIONS USED IN VEHICLE GLAZING - TEST OF GLAZING SYSTEMS (ISO 23013:2016) |
| PREN 10088-2 : DRAFT 2011 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| I.S. EN ISO 3183:2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
| 03/103470 DC : DRAFT FEB 2003 | BS EN 10219-1 - COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY REQUIREMENTS |
| 09/30207501 DC : 0 | BS EN 10217-1 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| BS EN 10338:2015 | Hot rolled and cold rolled non-coated products of multiphase steels for cold forming. Technical delivery conditions |
| PREN 1090-2 : DRAFT 2015 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| BS EN 13674-2 : 2006 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| PREN 10217-4 : DRAFT 2009 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| 05/30132585 DC : DRAFT APR 2005 | EN 10083-1 - STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10025-6:2004 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION |
| I.S. EN 50216-9:2009 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 9: OIL-TO-WATER HEAT EXCHANGERS |
| I.S. EN 2032-001:2014 | AEROSPACE SERIES - METALLIC MATERIALS - PART 001: CONVENTIONAL DESIGNATION |
| 01/708775 DC : DRAFT MAY 2001 | PREN 10297-2 - SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL TUBES |
| DIN EN 10025-2:2011-04 (Draft) | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
| PREN 10210-1 : DRAFT 2016 | HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 1: GENERAL |
| UNE-EN 1090-2:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| DIN EN 10025-3:2011-04 (Draft) | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
| BS EN 10025-4:2004 | Hot rolled products of structural steels Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels |
| PREN 16510-1 : DRAFT 2013 | RESIDENTIAL SOLID FUEL BURNING APPLIANCES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| PREN 303-5 : DRAFT 2010 | CENTRAL-HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, HAND AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING |
| I.S. EN ISO 27627:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - ALUMINIUM ALLOY DRILL PIPE THREAD CONNECTION GAUGING (ISO 27627:2014) |
| I.S. EN 10217-4:2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| BS EN 1090-2 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| PREN 10149-2 : DRAFT 2011 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 2: DELIVERY CONDITIONS FOR THERMOMECHANICALLY ROLLED STEELS |
| I.S. EN 10217-5:2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| NF EN 14811 : 2006 + A1 2010 | RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
| PREN 10272 : DRAFT 2013 | STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
| PREN ISO 683-17 : DRAFT 2013 | HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO/DIS 683-17:2013) |
| EN 10253-2:2007 | Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
| DIN EN 12421:2015-12 (Draft) | MAGNESIUM AND MAGNESIUM ALLOYS - UNALLOYED MAGNESIUM |
| BS EN ISO 3183 : 2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| EN ISO 3183:2012/A1:2018 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
| EN 1563:2011 | Founding - Spheroidal graphite cast irons |
| EN 10217-2:2002/A1:2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| PREN 10217-3 : DRAFT 2009 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| BS EN 10025-6:2019 | Hot rolled products of structural steels Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition |
| DIN EN 10217-6:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| PREN 10106 : DRAFT 2013 | COLD ROLLED NON-ORIENTED ELECTRICAL STEEL SHEET AND STRIP DELIVERED IN THE FULLY PROCESSED STATE |
| UNE-EN 10088-4:2010 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| I.S. EN 50216-10:2009 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 10: OIL-TO-AIR HEAT EXCHANGERS |
| DIN EN 1090-2:2015-07 (Draft) | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN 10217-1:2002/A1:2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| DIN EN 13674-2:2016-05 (Draft) | RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| UNI EN 1090-2 : 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN 10083-1:2006 | Steels for quenching and tempering - Part 1: General technical delivery conditions |
| I.S. EN 50112:1995 | MEASUREMENT, CONTROL, REGULATION - ELECTRICAL TEMPERATURE SENSORS - METAL PROTECTING TUBES FOR TC ASSEMBLIES |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
| I.S. EN 14811:2006 | RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
| DIN EN 10216-5:2014-03 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| I.S. EN 10253-2:2007 | BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| ISO 14737:2015 | Carbon and low alloy cast steels for general applications |
| DIN EN 12438:2015-12 (Draft) | MAGNESIUM AND MAGNESIUM ALLOYS - MAGNESIUM ALLOYS FOR CAST ANODES |
| DIN EN 12284:2004-01 | Refrigerating systems and heat pumps - Valves - Requirements, testing and marking |
| DIN EN 10297-1 E : 2003 | SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY AND ALLOY STEEL TUBES |
| DIN EN 10297-2 E : 2006 | SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL |
| DIN EN 12809:2005-08 | Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods |
| DIN EN 14965 E : 2006 | INLAND NAVIGATION VESSELS - FLAT BOLLARDS |
| DIN EN 1754:2015-10 | Magnesium and magnesium alloys - Designation system for anodes, ingots and castings - Material symbols and material numbers |
| DIN EN 1559-1:2011-05 | Founding - Technical conditions of delivery - Part 1: General |
| DIN EN 10305-4 E : 2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| DIN EN 10305-6:2016-08 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| DIN EN 10302:2008-06 | Creep resisting steels, nickel and cobalt alloys |
| UNE-EN 10120:2018 | Steel sheet and strip for welded gas cylinders |
| DIN EN 303-5:2012-10 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
| DIN EN 10269:2014-02 | STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
| DIN EN 10216-2:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| DIN EN 10297-1:2003-06 | SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY AND ALLOY STEEL TUBES |
| DIN EN 10296-2 : 2007-06 | WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL |
| DIN EN 10297-2:2006-02 | Seamless steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
| DIN EN 10130 : 2007-04 | COLD-ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| BS EN 10216-4:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified low temperature properties |
| BS EN 10312:2002 | Welded stainless steel tubes for the conveyance of aqueous liquids inclu ding water for human consumption. Technical delivery conditions |
| UNE-EN 10305-3:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes |
| UNE-EN 10305-1:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes |
| UNE-EN 10305-5:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes |
| BS EN 10155:1993 | Structural steels with improved atmospheric corrosion resistance. Technical delivery conditions |
| DIN EN 10305-3:2016-08 | Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes |
| BS EN 10025:1993 | Hot rolled products of non-alloy structural steels. Technical delivery conditions |
| BS EN 10215:1995 | Continuously hot-dip aluminium-zinc (AZ) coated steel strip and sheet. Technical delivery conditions |
| UNE-EN 10139:2016 | Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions |
| UNE-EN 10305-4:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems |
| DIN EN 1559-2:2014-12 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
| I.S. EN 10216-3:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| I.S. EN 10305-5:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES |
| I.S. EN 10216-1:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| I.S. EN 13674-3:2006 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 3: CHECK RAILS |
| I.S. EN 10273:2016 | HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| I.S. EN 10305-6:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| I.S. EN 10130:2006 | COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10208-2:2009-07 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
| I.S. EN 10152:2017 | ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 13674-1:2011-04 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| DIN EN 13674-1:2017-07 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| DIN EN 13240:2002-02 | ROOM HEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| I.S. EN 10296-2:2006 | WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL |
| I.S. EN 12421:2017 | MAGNESIUM AND MAGNESIUM ALLOYS - UNALLOYED MAGNESIUM |
| I.S. EN 10209:2013 | COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR VITREOUS ENAMELLING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10216-5:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES |
| I.S. EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| I.S. EN 10217-7:2014 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
| DIN EN 10088-1:2014-12 | Stainless steels - Part 1: List of stainless steels; German version EN 10088-1:2014 |
| I.S. EN 1754:2015 | MAGNESIUM AND MAGNESIUM ALLOYS - DESIGNATION SYSTEM FOR ANODES, INGOTS AND CASTINGS - MATERIAL SYMBOLS AND MATERIAL NUMBERS |
| I.S. EN 13835:2012 | FOUNDING - AUSTENITIC CAST IRONS |
| DIN EN 10208-1:1998-02 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
| I.S. EN 10205:2016 | COLD REDUCED TINMILL PRODUCTS - BLACKPLATE |
| DIN EN 10210-1:2006-07 | Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
| DIN EN 10169-3:2003-09 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 3: PRODUCTS FOR BUILDING INTERIOR APPLICATIONS |
| DIN EN 10213-1:1996-01 | TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 1: GENERAL |
| DIN EN 10088-2:2014-12 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| I.S. EN 12438:2017 | MAGNESIUM AND MAGNESIUM ALLOYS - MAGNESIUM ALLOYS FOR CAST ANODES |
| DIN EN 10169-2:2006-07 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 2: PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS |
| I.S. EN 10027-1:2016 | DESIGNATION SYSTEMS FOR STEELS - PART 1: STEEL NAMES |
| I.S. EN 10088-1:2014 | STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
| I.S. EN 1559-1:2011 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
| I.S. EN 10270-3:2011 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 3: STAINLESS SPRING STEEL WIRE |
| DIN EN 10169-1:2004-04 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS) |
| I.S. EN 10149-1:2013 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10269:2013 | STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
| I.S. EN 1559-2:2014 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2 - ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
| I.S. EN 10219-1:2006 | COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10083-2:2006 | STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOY STEELS |
| I.S. EN 10272:2016&LC:2016 | STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
| I.S. EN 1561:2011 | FOUNDING - GREY CAST IRONS |
| I.S. EN 10088-3:2014 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| I.S. EN 303-1:2017 | HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING |
| DIN EN 13229:2002-01 | INSET APPLIANCES INCLUDING OPEN FIRES FIRED BY SOLID FUELS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 303-5:2012 | HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING |
| I.S. EN 1560:2011 | FOUNDING - DESIGNATION SYSTEM FOR CAST IRON - MATERIALS SYMBOLS AND MATERIAL NUMBERS |
| I.S. EN 10305-4:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| DIN EN 14180:2003-10 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| I.S. EN 10268:2006 | COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10210-1:2006 | HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10305-1:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES |
| I.S. EN ISO 683-17:2014 | HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO 683-17:2014) |
| I.S. EN 14180:2014 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| DIN EN 10088-3:2014-12 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| I.S. EN 10305-3:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 3: WELDED COLD SIZED TUBES |
| DIN EN 10083-3:2007-01 | STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| I.S. EN 13674-1:2011 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| I.S. EN 10277-1:2008 | BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
| DIN EN 10277-1:2008-06 | BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
| I.S. EN 1564:2011 | FOUNDING - AUSFERRITIC SPHEROIDAL GRAPHITE CAST IRONS |
| DIN EN 10025-1:2005-02 | Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version EN 10025-1:2004 |
| I.S. EN 10255:2004 | NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10111:2008 | CONTINUOUSLY HOT ROLLED LOW CARBON STEEL SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10107:2014 | GRAIN-ORIENTED ELECTRICAL STEEL STRIP AND SHEET DELIVERED IN THE FULLY PROCESSED STATE |
| I.S. EN 10302:2008 | CREEP RESISTING STEELS, NICKEL AND COBALT ALLOYS |
| UNI EN 10111 : 2008 | CONTINUOUSLY HOT ROLLED LOW CARBON STEEL SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 10149-1 : 2013 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| VDI 3388:2012-03 | Materials for trimming and forming dies |
| VDI 3805 Blatt 17:2016-01 | Product data exchange in the building services - Drinking water system assemblies |
| VDI 3805 Blatt 2:2016-01 | Product data exchange in the building services - Heating value assemblies |
| 07/30164802 DC : 0 | BS EN 10346 - CONTINUOUSLY HOT-DIP COATED STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 1563:2015-07 (Draft) | FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS |
| PREN 10305-5 : DRAFT 2015 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES |
| BS EN 10217-2 : 2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| 03/306637 DC : DRAFT APR 2003 | EN 13674-4 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: FLAT BOTTOM SYMMETRICAL RAILWAY RAILS FROM 27 KG/M TO 46 KG/M |
| 11/30239479 DC : 0 | BS EN 10025-3 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
| DIN EN 10169:2012-06 | Continuously organic coated (coil coated) steel flat products - Technical delivery conditions (includes Amendment A1:2012) |
| I.S. EN 10169-1:2004 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS) |
| 10/30239357 DC : 0 | BS EN 4500-3 - AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 3: SPECIFIC RULES FOR HEAT RESISTING ALLOYS |
| I.S. EN 13240:2001 | ROOMHEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| I.S. EN 10326:2004 | CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
| BS EN 10253-3:2008 | Butt-welding pipe fittings Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements |
| BS ISO 11973:2015 | Heat-resistant cast steels and alloys for general applications |
| 11/30235499 DC : 0 | BS EN ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| 13/30286664 DC : 0 | BS EN 10139 - COLD ROLLED UNCOATED MILD STEEL NARROW STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| EN 10217-7:2014 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
| DIN EN 10346:2015-10 | Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions |
| DIN EN 10205:1992-01 | COLD REDUCED TIN-MILL PRODUCTS - BLACKPLATE |
| 17/30346741 DC : 0 | BS EN 10225-1 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 1: PLATES |
| I.S. EN 12815:2001 | RESIDENTIAL COOKERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| UNE-EN 10338:2016 | Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions |
| 09/30201490 DC : 0 | BS EN 10305-2 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES |
| 09/30207511 DC : 0 | BS EN 10217-4 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| 15/30325003 DC : 0 | BS EN 10305-2 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES |
| 17/30347067 DC : 0 | BS EN 10340-1 - STEEL CASTINGS FOR STRUCTURAL USES - PART 1: GENERAL |
| UNI EN 10088-5 : 2009 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and cold-formed products of corrosion-resistant steel for use in construction |
| PREN 12421 : DRAFT 2015 | MAGNESIUM AND MAGNESIUM ALLOYS - UNALLOYED MAGNESIUM |
| DIN EN 10294-2 E : 2012 | HOLLOW BARS FOR MACHINING - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEELS WITH SPECIFIED MACHINABILITY PROPERTIES |
| PREN 10025-4 : DRAFT 2011 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
| 11/30254171 DC : 0 | BS EN 10088-2 - STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| DIN EN 10253-4:2008-06 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| I.S. EN 10083-1:2006 | STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| 13/30288198 DC : 0 | BS EN 10106 - COLD ROLLED NON-ORIENTED ELECTRICAL STEEL SHEET AND STRIP DELIVERED IN THE FULLY PROCESSED STATE |
| ISO 19960:2015 | Cast steels and alloys with special physical properties |
| BS EN 10346:2015 | Continuously hot-dip coated steel flat products for cold forming. Technical delivery conditions |
| PREN 10209 : DRAFT 2010 | COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR VITREOUS ENAMELLING - TECHNICAL DELIVERY CONDITIONS |
| 14/30312176 DC : 0 | BS EN 10120 - STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS |
| UNI EN 303-5 : 2012 | HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING |
| UNI EN 10216-5 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES |
| 13/30288572 DC : 0 | BS EN 10272 - STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
| UNE-EN 10346:2015 | Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions |
| 99/712245 DC : DRAFT AUG 1999 | PREN 10080-1 - STEEL FOR CONCRETE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - PART 1: GENERAL REQUIREMENTS |
| 11/30239482 DC : 0 | BS EN 10025-4 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
| I.S. EN 1563:2011 | FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS |
| 99/701054 DC : DRAFT JAN 1999 | PREN 10089 - HOT-ROLLED STEELS FOR QUENCHED AND TEMPERED SPRINGS - TECHNICAL DELIVERY CONDITIONS |
| 13/30288575 DC : 0 | BS EN 10273 - HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| 09/30207514 DC : 0 | BS EN 10217-5 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| BS EN 15583-2:2012 | Winter maintenance equipment. Snow ploughs Testing criteria and their requirements |
| 01/715451 DC : DRAFT NOV 2001 | PREN 10088-2 - STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL AND CONSTRUCTION PURPOSES |
| BS ISO 13583-2:2015 | Centrifugally cast steel and alloy products Heat-resistant materials |
| 08/30167676 DC : DRAFT JAN 2008 | BS EN 10120 - STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS |
| 05/30132920 DC : DRAFT APR 2005 | EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR THE EXECUTION OF STEEL STRUCTURES |
| 15/30324997 DC : 0 | BS EN 10305-4 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| 00/713959 DC : DRAFT SEP 2000 | PREN 10138-3 - PRESTRESSING STEELS - PART 3: STRAND |
| 09/30207521 DC : 0 | BS EN 10217-7 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
| 10/30228886 DC : 0 | BS EN 303-5 - CENTRAL-HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, HAND AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING |
| 09/30185992 DC : 0 | BS EN 13674-1 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| PREN 10222-1 : DRAFT 2012 | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| API 5L CHINESE : 2012 | SPECIFICATION FOR LINE PIPE |
| PREN 10107 : DRAFT 2012 | GRAIN-ORIENTED ELECTRICAL STEEL STRIP AND SHEET DELIVERED IN THE FULLY PROCESSED STATE |
| PREN 10305-6 : DRAFT 2015 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| 03/306635 DC : DRAFT APR 2003 | EN 13674-2 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| PD 6622:1998 | Designation systems for steel. Additional symbols |
| 05/30132603 DC : DRAFT APR 2005 | EN 10083-3 - STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| 05/30126202 DC : 0 | EN 10088-4 - STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| I.S. EN 10085:2001 | NITRIDING STEELS - TECHNICAL DELIVERY CONDITIONS |
| BS EN 10083-3 : 2006-08 | STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| UNI EN 10253-4 : 2009 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| PREN 2032-001 : 200P5 | AEROSPACE SERIES - METALLIC MATERIALS - PART 001: CONVENTIONAL DESIGNATION |
| UNE-EN 13674-4:2007 | Railway applications - Track - Rail - Part 4: Vignole railway rails from 27 kg/m to, but excluding 46 kg/m |
| CR 12172:1995 | Numerical designation systems for metallic materials - Review of existing systems and recommendation for new systems |
| I.S. EN 1562:2012 | FOUNDING - MALLEABLE CAST IRONS |
| I.S. EN 10294-2:2012 | HOLLOW BARS FOR MACHINING - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEELS WITH SPECIFIED MACHINABILITY PROPERTIES |
| I.S. EN 10217-1:2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| UNI EN 13674-4 : 2010 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
| PREN 1560 : DRAFT 2009 | FOUNDING - DESIGNATION SYSTEM FOR CAST IRON - MATERIAL SYMBOLS AND MATERIAL NUMBERS |
| EN 10217-3:2002/A1:2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| ISO 3183:2012 | Petroleum and natural gas industries Steel pipe for pipeline transportation systems |
| EN 1562:2012 | Founding - Malleable cast irons |
| I.S. EN 10025-3:2004 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
| UNE-EN 10205:2017 | Cold reduced tinmill products - Blackplate |
| DIN EN 10217-5:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| PREN 10217-7 : DRAFT 2009 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
| DIN EN 10217-3:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| DIN EN 10217-1:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| EN 1090-2:2008+A1:2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN 13674-4:2006+A1:2009 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
| PREN 10025-2 : DRAFT 2011 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
| PREN 1559-2 : DRAFT 2012 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
| PREN 12809 : DRAFT 2011 | RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS |
| I.S. ENV 10169-2:1999 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 2: PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS |
| EN 10025-2:2004/AC:2005 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
| BS EN 10217-6:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy steel tubes with specified low temperature properties |
| PREN 10255 : DRAFT 2010 | NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 1564:2012-01 | Founding - Ausferritic spheroidal graphite cast irons |
| I.S. EN 10225:2009 | WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
| UNE-EN 10088-2:2015 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| EN 1561:2011 | Founding - Grey cast irons |
| DIN EN 10083-1:2006-10 | STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10132-1:2000 | COLD ROLLED NARROW STEEL STRIP FOR HEAT TREATMENT - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
| DIN EN ISO 683-17:2015-02 | Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
| DIN EN 10216-3:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| UNE-EN 10208-1:2011 | Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A |
| DIN EN 14785 E : 2006 | RESIDENTIAL SPACE HEATING APPLIANCES FIRED BY WOOD PELLETS - REQUIREMENTS AND TEST METHODS |
| DIN EN 10089:2003-04 | Hot rolled steels for quenched and tempered springs - Technical delivery conditions; German version EN 10089:2002 |
| UNI EN 10216-2 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| UNE-EN 10216-2:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
| BS EN 13674-1 : 2011 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| BS EN 10213-1:1996 | Technical delivery conditions for steel castings for pressure purposes General |
| DIN EN 10305-2:2016-08 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES |
| BS EN 10208-2:2009 | Steel pipes for pipelines for combustible fluids. Technical delivery conditions Pipes of requirement class B |
| BS EN 10305-5:2010 | Steel tubes for precision applications. Technical delivery conditions Welded and cold sized square and rectangular tubes |
| BS EN 10217-7:2014 | Welded steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes |
| BS EN 10113-2:1993 | Hot-rolled products in weldable fine grain structural steels Delivery conditions for normalized/normalized rolled steels |
| DIN EN 10296-2 E : 2006 | WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL |
| BS EN 10120:2017 | Steel sheet and strip for welded gas cylinders |
| BS EN 10327:2004 | Continuously hot-dip coated strip and sheet of low carbon steels for cold forming. Technical delivery conditions |
| BS EN 1503-1:2000 | Valves. Materials for bodies, bonnets and covers Steels specified in European Standards |
| BS EN 10224:2002 | Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids. Technical delivery conditions |
| UNE-EN 10027-1:2017 | Designation systems for steels - Part 1: Steel names |
| BS EN 10169-3:2003 | Continuously organic coated (coil coated) steel flat products Products for building interior applications |
| BS EN 12438:2017 | Magnesium and magnesium alloys. Magnesium alloys for cast anodes |
| UNE-EN 10088-3:2015 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| UNE-EN 10216-4:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties |
| UNE-EN 12438:2018 | Magnesium and magnesium alloys - Magnesium alloys for cast anodes |
| DIN EN 10305-5:2016-08 | Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes |
| DIN EN 14785:2006-09 | Residential space heating appliances fired by wood pellets - Requirements and test methods |
| UNE-EN 1564:2012 | Founding - Ausferritic spheroidal graphite cast irons |
| UNE-EN 10225:2010 | Weldable structural steels for fixed offshore structures - Technical delivery conditions |
| EN 13240:2001/A2:2004/AC:2007 | ROOMHEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| EN 15583-2:2012 | Winter maintenance equipment - Snow ploughs - Part 2: Testing criteria and their requirements |
| EN 1993-5:2007/AC:2009 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 5: PILING |
| UNI EN 10208-2 : 2009 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
| UNI EN 10107 : 2014 | GRAIN-ORIENTED ELECTRICAL STEEL STRIP AND SHEET DELIVERED IN THE FULLY PROCESSED STATE |
| UNI EN 13240 : 2006 | ROOM-HEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| UNI EN ISO 683-17 : 2014 | HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS |
| UNI EN 10269 : 2013 | Nickel steels and alloys for fasteners with specific properties at high and / or low temperatures |
| UNI EN 10225 : 2009 | WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 10268 : 2013 | COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 10088-3 : 2014 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMIFINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| UNI EN 13835 : 2012 | FOUNDING - AUSTENITIC CAST IRONS |
| UNI EN 10250-1 : 2001 | OPEN DIE STEEL FORGINGS FOR GENERAL ENGINEERING PURPOSES - GENERAL REQUIREMENTS |
| UNI EN 10083-1 : 2006 | STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| EN 1559-2:2014 | Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings |
| UNI EN 10219-1 : 2006 | COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| UNI EN 1559-2 : 2014 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
| UNI EN 10255 : 2007 | NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 12809 : 2004 | RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS |
| UNI EN 12815 : 2006 | RESIDENTIAL COOKERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| UNI EN 10083-3 : 2006 | STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| UNI EN 1561 : 2011 | FOUNDING - GREY CAST IRONS |
| UNI EN 10208-1 : 2009 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
| UNI EN 1559-1 : 2011 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
| UNI EN 1564 : 2011 | FOUNDING - AUSFERRITIC SPHEROIDAL GRAFITE CAST IRONS |
| UNI EN 13674-3 : 2010 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 3: CHECK RAILS |
| UNI EN 10216-4 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| UNI EN 10216-1 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| UNI EN 10084 : 2008 | CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| UNI EN 10302 : 2008 | CREEP RESISTING STEELS, NICKEL AND COBALT ALLOYS |
| UNI EN 10088-1 : 2014 | STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
| UNI EN 14180 : 2014 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| UNI EN 10209 : 2013 | COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR VITREOUS ENAMELLING - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 14785 : 2006 | RESIDENTIAL SPACE HEATING APPLIANCES FIRED BY WOOD PELLETS - REQUIREMENTS AND TEST METHODS |
| UNI EN 10216-3 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| UNI EN 1560 : 2011 | FOUNDING - DESIGNATION SYSTEM FOR CAST IRON - MATERIAL SYMBOLS AND MATERIAL NUMBERS |
| I.S. EN 10250-1:2000 | OPEN DIE STEEL FORGINGS FOR GENERAL ENGINEERING PURPOSES - PART 1: GENERAL REQUIREMENTS |
| DIN EN 10149-1:2013-12 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| 12/30260516 DC | BS EN 15250 - SLOW HEAT RELEASE APPLIANCES FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| EN 303-5:2012 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
| UNI EN ISO 27627 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - ALUMINIUM ALLOY DRILL PIPE THREAD CONNECTION GAUGING |
| BS ISO 23013:2016 | Road vehicles. Determination of resistance to forced entry of security glass constructions used in vehicle glazing. Test of glazing systems |
| 03/103468 DC : DRAFT FEB 2003 | BS EN 10210-1 - HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY REQUIREMENTS |
| PREN 17180 : DRAFT 2017 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE VAPORIZED HYDROGEN PEROXIDE STERILIZERS - REQUIREMENTS AND TESTING |
| I.S. EN 10087:1999 | FREE-CUTTING STEELS - TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, HOT-ROLLED BARS AND RODS |
| I.S. EN 10327:2004 | CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF LOW CARBON STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 39:2001 | LOOSE STEEL TUBES FOR TUBE AND COUPLER SCAFFOLDS - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10154:2002 | CONTINUOUSLY HOT-DIP ALUMINIUM-SILICON (AS) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
| BS EN 50216-9:2009 | Power transformer and reactor fittings Oil-to-water heat exchangers |
| 15/30322070 DC : 0 | BS EN 1563 - FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS |
| ISO 13583-2:2015 | Centrifugally cast steel and alloy products — Part 2: Heat-resistant materials |
| I.S. EN 12809:2001 | RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS |
| DIN EN 303-1:2016-07 (Draft) | HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING |
| PREN 10205 : DRAFT 2014 | COLD REDUCED TINMILL PRODUCTS - BLACKPLATE |
| I.S. EN 10336:2007 | CONTINUOUSLY HOT-DIP COATED AND ELECTROLYTICALLY COATED STRIP AND SHEET OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| 98/705399 DC : DRAFT MAR 1998 | PREN 10025-1 - HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - PART 1: GENERAL DELIVERY CONDITIONS |
| DIN EN 10088-4:2010-01 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| 02/704945 DC : DRAFT APR 2002 | PREN 10326 - CONTINUOUSLY HOT-DIP COATED STRUCTURAL STEELS STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
| 03/108196 DC : 0 | EN 10253-4 - BUTT WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC & AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| DIN EN 10152:2015-10 (Draft) | ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10025-1:2004 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| EN 10216-5:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| 03/105795 DC : DRAFT APR 2003 | EN 10107 - GRAIN-ORIENTED ELECTRICAL STEEL SHEET AND STRIP DELIVERED IN FULLY PROCESSED STATE |
| 08/30182454 DC : DRAFT JULY 2008 | BS EN 10208-1 - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
| EN 10025-3:2004 | Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels |
| 14/30292267 DC : 0 | BS EN 1754 - MAGNESIUM AND MAGNESIUM ALLOYS - DESIGNATION SYSTEM FOR ANODES, INGOTS AND CASTINGS - MATERIAL NUMBERS AND MATERIAL SYMBOLS |
| NF ENV 1090-1 : 96 FD | EXECUTION OF STEEL STRUCTURES - PART 1: GENERAL RULES AND RULES FOR BUILDINGS |
| 01/709220 DC : DRAFT JUN 2001 | PREN 10027-1 - DESIGNATION SYSTEMS FOR STEEL - PART 1: STEEL NAMES |
| PREN 13674-4 : DRAFT 2016 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
| 15/30285031 DC : 0 | BS EN ISO 14916 - THERMAL SPRAYING - DETERMINATION OF TENSILE ADHESIVE STRENGTH |
| DIN EN 10139:2016-06 | COLD ROLLED UNCOATED LOW CARBON STEEL NARROW STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 10253-3 : 2009 | BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS |
| UNI EN 10343 : 2009 | STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS |
| 12/30266615 DC : 0 | BS EN 1559-2 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
| 14/30301272 DC : 0 | BS EN 10205 - COLD REDUCED TINMILL PRODUCTS - BLACKPLATE |
| BS EN 2032-001:2014 | Aerospace series. Metallic materials Conventional designation |
| 11/30254168 DC : 0 | BS EN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| BS EN 15272-3:2007 | Inland navigation vessels. Equipment for rope leading Roller fairleads |
| DIN EN 10210-1:2016-01 (Draft) | Hot finished structural steel hollow sections - Part 1: General; German and English version prEN 10210-1:2016 |
| PREN 10253-4 : DRAFT 2017 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC & AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| 14/30294825 DC : 0 | BS EN 10263-1 - STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| 09/30185794 DC : 0 | BS EN 10294-2 - HOLLOW BARS FOR MACHINING - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEELS AND NICKEL ALLOYS WITH SPECIFIED MACHINABILITY PROPERTIES |
| DIN EN 10253-3:2009-02 | BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS |
| 02/713103 DC : DRAFT NOV 2002 | PREN 10169-1 - CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS) |
| DIN EN 10088-5:2009-07 | STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| 14/30276899 DC : 0 | BS ISO 23013 - ROAD VEHICLES - DETERMINATION TO FORCED ENTRY OF SAFETY GLASS CONSTRUCTIONS USED IN VEHICLE GLAZING - TEST OF GLAZING SYSTEMS |
| 15/30324991 DC : 0 | BS EN 10305-1 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES |
| 02/713544 DC : DRAFT NOV 2002 | EN 10268 - COLD ROLLED FLAT PRODUCTS WITH HIGHER YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| 11/30238022 DC : DRAFT MAR 2011 | BS EN 12815 - RESIDENTIAL COOKERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| 00/713960 DC : 0 | PREN 10138-4 - PRESTRESSING STEELS - PART 4: BARS |
| 09/30201494 DC : 0 | BS EN 10305-3 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 3: WELDED COLD SIZED TUBES |
| UNI EN 10294-2 : 2012 | HOLLOW BARS FOR MACHINING - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEELS WITH SPECIFIED MACHINABILITY PROPERTIES |
| 04/30123986 DC : DRAFT OCT 2004 | EN 50216-9 - POWER TRANSFORMER AND REACTOR FITTINGS - PART 9: OIL TO WATER HEAT EXCHANGER |
| 09/30200837 DC : 0 | BS EN 1560 - FOUNDING - DESIGNATION SYSTEM FOR CAST IRON - MATERIAL SYMBOLS AND MATERIAL NUMBERS |
| 01/708774 DC : DRAFT MAY 2001 | PREN 10296-2 - WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL TUBES |
| BS DD214(1993) : 1993 | DESIGNATION SYSTEM FOR STEEL: ADDITIONAL SYMBOLS FOR STEEL NAMES (ECISS INFORMATION CIRCULAR 10) |
| BS EN 10263-1:2017 | Steel rod, bars and wire for cold heading and cold extrusion General technical delivery conditions |
| DIN EN 15272-3:2008-02 | INLAND NAVIGATION VESSELS - EQUIPMENT FOR ROPE LEADING - PART 3: ROLLER FAIRLEADS |
| UNI EN 13674-2 : 2010 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| UNI EN 15272-3 : 2008 | INLAND NAVIGATION VESSELS - EQUIPMENT FOR ROPE LEADING - PART 3: ROLLER FAIRLEADS |
| DIN 17465:1993-08 | HEAT RESISTING STEEL CASTINGS - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 1563 : 2012 | FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS |
| BS EN 10088-4:2009 | Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| DD ENV 10169-2:1999 | Continuously organic coated (coil coated) steel flat products Products for building exterior applications |
| PREN 10025-6 : DRAFT 2011 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN QUENCHED AND TEMPERED CONDITIONS |
| UNE-EN 10213:2009 | Steel castings for pressure purposes |
| I.S. EN 10025-4:2004 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
| I.S. EN 10338:2015 | HOT ROLLED AND COLD ROLLED NON-COATED PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 15272-3:2007 | INLAND NAVIGATION VESSELS - EQUIPMENT FOR ROPE LEADING - PART 3: ROLLER FAIRLEADS |
| I.S. EN 15583-2:2012 | WINTER MAINTENANCE EQUIPMENT - SNOW PLOUGHS - PART 2: TESTING CRITERIA AND THEIR REQUIREMENTS |
| ISO 11972:2015 | Corrosion-resistant cast steels for general applications |
| I.S. EN 10207:2017 | STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS |
| PREN 10269 : DRAFT 2011 | STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
| I.S. EN 10346:2015 | CONTINUOUSLY HOT-DIP COATED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| BS EN 10217-3:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes |
| PREN 1754 : DRAFT 2014 | MAGNESIUM AND MAGNESIUM ALLOYS - DESIGNATION SYSTEM FOR ANODES, INGOTS AND CASTINGS - MATERIAL NUMBERS AND MATERIAL SYMBOLS |
| PREN 10273 : DRAFT 2013 | HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| BS ISO 19960:2015 | Cast steels and alloys with special physical properties |
| BS EN 10207:2017 | Steels for simple pressure vessels. Technical delivery requirements for plates, strips and bars |
| DIN EN 10217-2:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| 13/30271701 DC : 0 | BS EN 16510-1 - RESIDENTIAL SOLID FUEL BURNING APPLIANCES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| UNE-EN 1562:2012 | Founding - Malleable cast irons |
| DIN EN 10217-4:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| UNI EN 14811 : 2010 | RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
| PREN 10027-1 : DRAFT 2016 | DESIGNATION SYSTEMS FOR STEELS - PART 1: STEEL NAMES |
| PREN 13674-2 : DRAFT 2016 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| NF EN 10253-3 : 2009 | BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS |
| PREN 10268 : DRAFT 2002 | COLD ROLLED FLAT PRODUCTS WITH HIGHER YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| EN 10217-6:2002/A1:2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| DIN EN 10270-3:2012-01 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 3: STAINLESS SPRING STEEL WIRE |
| EN 10083-3:2006/AC:2008 | STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| EN 14811:2006+A1:2009 | RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
| EN 10025-4:2004 | Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels |
| I.S. EN 13674-4:2006 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
| I.S. EN 13674-2:2006 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| NF EN 10225 : 2009 | WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10263-1:2017 | STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| EN 10216-2:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
| ISO 4957:1999 | Tool steels |
| UNE-EN 10209:2013 | Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions |
| DIN EN 10255:2015-05 (Draft) | NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10107:2014-07 | Grain-oriented electrical steel strip and sheet delivered in the fully processed state |
| DIN EN 14180:2014-09 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| DIN EN 10268:2013-12 | COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10216-4:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| DIN EN 10151:2003-02 | STAINLESS STEEL STRIP FOR SPRINGS - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10217-7:2015-01 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
| UNE-EN 10208-2:2011 | Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B |
| DIN EN 10106:2016-03 | COLD ROLLED NON-ORIENTED ELECTRICAL STEEL STRIP AND SHEET DELIVERED IN THE FULLY PROCESSED STATE |
| DIN EN 10084:2008-06 | CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10225:2009-10 | WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10219-1:2016-01 (Draft) | Cold formed welded structural steel hollow sections - Part 1: General; German and English version prEN 10219-1:2016 |
| DIN EN 10085:2001-07 | Nitriding steels - Technical delivery conditions; English version of DIN EN 10085 |
| DIN EN 10272:2016-10 | STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
| BS EN 1564:2011 | Founding. Ausferritic spheroidal graphite cast irons |
| BS EN 1559-2:2014 | Founding. Technical conditions of delivery Additional requirements for steel castings |
| BS EN 10169-2:2006 | Continuously organic coated (coil coated) steel flat products Products for building exterior applications |
| I.S. EN 10139:2016 | COLD ROLLED UNCOATED LOW CARBON STEEL NARROW STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| BS EN 10255:2004 | Non-alloy steel tubes suitable for welding and threading. Technical delivery conditions |
| BS EN 12284:2003 | Refrigerating systems and heat pumps. Valves. Requirements, testing and marking |
| BS EN 10209:2013 | Cold rolled low carbon steel flat products for vitreous enameling. Technical delivery conditions |
| BS EN 10216-5:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes |
| BS EN 10025-1:2004 | Hot rolled products of structural steels General technical delivery conditions |
| UNE-EN 10305-6:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
| UNE-EN 1560:2011 | Founding - Designation system for cast iron - Material symbols and material numbers |
| BS EN 10084 : 2008-06 | CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS |
| BS EN 10296-2:2005 | Welded circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Stainless steel |
| BS EN 10271:1999 | Electrolytically zinc-nickel (ZN) coated steel flat products. Technical delivery conditions |
| BS EN 10087 : 1999-01 | FREE CUTTING STEELS - TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, HOT ROLLED BARS AND RODS |
| BS EN 10106:2015 | Cold rolled non-oriented electrical steel strip and sheet delivered in the fully processed state |
| BS EN 10336:2007 | Continuously hot-dip coated and electrolytically coated strip and sheet of multiphase steels for cold forming. Technical delivery conditions |
| BS EN 1754:2015 | Magnesium and magnesium alloys. Designation system for anodes, ingots and castings. Material symbols and material numbers |
| BS EN 10216-3:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes |
| BS EN 10305-6:2016 | Steel tubes for precision applications. Technical delivery conditions Welded cold drawn tubes for hydraulic and pneumatic power systems |
| BS EN 1561:2011 | Founding. Grey cast irons |
| BS EN 10083-2:2006 | Steels for quenching and tempering Technical delivery conditions for non alloy steels |
| BS EN 12815 : 2001 | RESIDENTIAL COOKERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| BS EN 13674-3 : 2006 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 3: CHECK RAILS |
| BS EN 1560:2011 | Founding. Designation system for cast iron. Material symbols and material numbers |
| BS EN 10270-3:2011 | Steel wire for mechanical springs Stainless spring steel wire |
| UNE-EN 10305-2:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes |
| BS EN 10107:2014 | Grain-oriented electrical steel strip and sheet delivered in the fully processed state |
| BS EN 10083-1:2006 | Steels for quenching and tempering General technical delivery conditions |
| BS EN 10088-3:2014 | Stainless steels Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| UNE-EN 10269:2014 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| UNE-EN 13835:2012 | Founding - Austenitic cast irons |
| UNE-EN 10152:2017 | Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions |
| BS EN 10137-1:1996 | Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions General delivery conditions |
| BS EN ISO 683-17:2014 | Heat-treated steels, alloy steels and free-cutting steels Ball and roller bearing steels |
| BS EN 13240 : 2001 | ROOMHEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| BS EN 10305-3:2016 | Steel tubes for precision applications. Technical delivery conditions Welded cold sized tubes |
| DIN EN 10294-1 E : 2005 | HOLLOW BARS FOR MACHINING - TECHNICAL DELIVERY CONDITIONS - PART 1: NON ALLOY AND ALLOY STEELS |
| BS EN 10326:2004 | Continuously hot-dip coated strip and sheet of structural steels. Technical delivery conditions |
| BS EN 10147:2000 | Continuously hot-dip zinc coated structural steels strip and sheet. Technical delivery conditions |
| BS EN 10027-1:2016 | Designation systems for steels Steel names |
| BS EN 14965:2005 | Inland navigation vessels. Flat bollards |
| ISO 683-17:2014 | Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels |
| BS EN 10090:1998 | Valve steels and alloys for internal combustion engines |
| BS EN 14180:2014 | Sterilizers for medical purposes. Low temperature steam and formaldehyde sterilizers. Requirements and testing |
| BS EN 10142:2000 | Continuously hot-dip zinc coated low carbon steels strip and sheet for cold forming. Technical delivery conditions |
| BS EN 10139:2016 | Cold rolled uncoated low carbon steel narrow strip for cold forming. Technical delivery conditions |
| BS EN 10305-1:2016 | Steel tubes for precision applications. Technical delivery conditions Seamless cold drawn tubes |
| UNE-EN 10216-3:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
| ISO 27627:2014 | Petroleum and natural gas industries — Aluminium alloy drill pipe thread connection gauging |
| BS EN 10267:1998 | Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures |
| UNE-EN 12421:2017 | Magnesium and magnesium alloys - Unalloyed magnesium |
| BS EN 14785:2006 | Residential space heating appliances fired by wood pellets. Requirements and test methods |
| UNE-EN ISO 683-17:2015 | Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
| UNE-EN 10149-1:2014 | Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions |
| UNE-EN 10216-5:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| EN 10139:2016 | Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions |
| UNE-EN 10268:2007 | Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions |
| UNE-EN 10216-1:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
| UNE-EN 10270-3:2012 | Steel wire for mechanical springs - Part 3: Stainless spring steel wire |
| UNE-EN 10169:2011 | Continuously organic coated (coil coated) steel flat products - Technical delivery conditions |
| BS EN 10085 : 2001-05 | NITRIDING STEEL - TECHNICAL DELIVERY CONDITIONS |
| BS EN 10297-2:2005 | Seamless circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Stainless steel |
| BS EN 303-4:1999 | Heating boilers. Heating boilers with forced draught burners Heating boilers with forced draught burners. Special requirements for boilers with forced draught oil burners with outputs up to 70 kW and a maximum operating pressure of 3 bar. Terminology, special requirements, testing and marking |
| BS EN 10149-1:2013 | Hot rolled flat products made of high yield strength steels for cold forming General technical delivery conditions |
| DIN EN 10224:2005-12 | NON-ALLOY STEEL TUBES AND FITTINGS FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10292:2003-09 | CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STEELS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| EN 14785:2006 | Residential space heating appliances fired by wood pellets - Requirements and test methods |
| EN ISO 683-17:2014 | Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
| ENV 10169-2 : 1999 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS |
| EN 13835:2012 | Founding - Austenitic cast irons |
| EN 15272-3:2007 | Inland navigation vessels - Equipment for rope leading - Part 3: Roller fairleads |
| EN 10225:2009 | Weldable structural steels for fixed offshore structures - Technical delivery conditions |
| EN 2032-001:2014 | Aerospace series - Metallic materials - Part 001: Conventional designation |
| EN 39:2001 | Loose steel tubes for tube and coupler scaffold - Technical delivery conditions |
| EN 14965:2005 | Inland navigation vessels - Flat bollards |
| EN 1564:2011 | Founding - Ausferritic spheroidal graphite cast irons |
| EN 13674-3:2006+A1:2010 | Railway applications - Track - Rail - Part 3: Check rails |
| UNI EN 10277-1 : 2008 | BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
| EN 1503-1:2000 | Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European Standards |
| EN 1559-1:2011 | Founding - Technical conditions of delivery - Part 1: General |
| EN 13674-1:2011+A1:2017 | Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above |
| EN 13674-2:2006+A1:2010 | Railway applications - Track - Rail - Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above |
| EN 303-1:2017 | Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking |
| EN ISO 27627:2014 | Petroleum and natural gas industries - Aluminium alloy drill pipe thread connection gauging (ISO 27627:2014) |
| EN 14180:2014 | Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Requirements and testing |
| EN 1754:2015 | Magnesium and magnesium alloys - Designation system for anodes, ingots and castings - Material symbols and material numbers |
| EN 303-4:1999 | Heating boilers - Part 4: Heating boilers with forced draught burners - Special requirements for boilers with forced draught oil burners with outputs up to 70 kW and a maximum operating pressure of 3 bar - Terminology, special requirements, testing and marking |
| EN 1560:2011 | Founding - Designation system for cast iron - Material symbols and material numbers |
| UNE-EN 10294-2:2012 | Hollow bars for machining - Technical delivery conditions - Part 2: Stainless steels with specified machinability properties |
| PREN 10253-2 : DRAFT 2017 | BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| I.S. EN 10208-1:2009 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
| PREN 10263-1 : DRAFT 2014 | STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| 16/30258478 DC : 0 | BS EN 13674-2 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| 07/30117697 DC : 0 | BS EN 10338 - HOT ROLLED AND COLD ROLLED NON-COATED FLAT PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| 98/705400 DC : DRAFT MAR 1998 | PREN 10025-2 - HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS |
| 10/30239363 DC : 0 | BS EN 4500-5 - AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 5: SPECIFIC RULES FOR STEELS |
| I.S. EN 10169-3:2003 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 3: PRODUCTS FOR BUILDING INTERIOR APPLICATIONS |
| ISO 23013:2016 | Road vehicles Determination of resistance to forced entry of security glass constructions used in vehicle glazing Test of glazing systems |
| 03/317080 DC : DRAFT OCT 2003 | EN 14785 - RESIDENTIAL SPACE HEATING APPLIANCES FIRED BY WOOD PELLETS - REQUIREMENTS AND TEST METHODS |
| PREN 1563 : DRAFT 2015 | FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS |
| 07/30159083 DC : DRAFT FEB 2007 | BS EN 10106 - COLD ROLLED NON-ORIENTED ELECTRICAL STEEL SHEET AND STRIP DELIVERED IN THE FULLY PROCESSED STATE |
| 11/30238019 DC : 0 | BS EN 12809 - RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS |
| 14/30312182 DC : 0 | BS EN 10028-1 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| 10/30211677 DC : 0 | BS EN ISO 27627 - PETROLEUM AND NATURAL GAS INDUSTRIES - ALUMINIUM ALLOY DRILL PIPE THREAD CONNECTION GAUGING |
| 17/30337413 DC : 0 | BS EN ISO 4957 - TOOL STEELS |
| 09/30201486 DC : 0 | BS EN 10305-1 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES |
| 09/30201500 DC : 0 | BS EN 10305-5 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED AND COLD SIZED SQUARE AND RECTANGULAR TUBES |
| PREN 13240 : DRAFT 2011 | ROOM HEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| UNI EN 10025-6 : 2009 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION |
| 17/30346735 DC : 0 | BS EN 10225-3 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 3: HOT FINISHED HOLLOW SECTIONS |
| PREN 10217-2 : DRAFT 2009 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| PREN 10088-3 : DRAFT 2011 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| 02/704946 DC : DRAFT APR 2002 | PREN 10327 - CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF LOW CARBON STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| 08/30188146 DC : 0 | BS EN 10169 - CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| BS EN 14811 : 2006 | RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
| 09/30207505 DC : 0 | BS EN 10217-2 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| 11/30239485 DC : 0 | BS EN 10025-5 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
| 15/30320416 DC : 0 | BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| DIN EN 10343:2009-07 | STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS |
| 15/30331537 DC : 0 | BS EN 10207 - STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS |
| 01/715452 DC : DRAFT NOV 2001 | PREN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL AND CONSTRUCTION PURPOSES |
| 06/30146724 DC : 0 | EN 10277-1 - BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
| BS EN 1562:2012 | Founding. Malleable cast irons |
| 11/30254165 DC : 0 | BS EN 10088-1 - STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
| UNI EN 2032-001 : 2014 | AEROSPACE SERIES - METALLIC MATERIALS - PART 001: CONVENTIONAL DESIGNATION |
| 15/30327648 DC : 0 | BS EN 12421 - MAGNESIUM AND MAGNESIUM ALLOYS - UNALLOYED MAGNESIUM |
| 10/30227692 DC : 0 | BS EN 10209 - COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR VITREOUS ENAMELLING - TECHNICAL DELIVERY CONDITIONS |
| 10/30233309 DC : 0 | BS EN 10255 - NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS |
| 04/30117694 DC : DRAFT AUG 2004 | EN 10130 - COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10209:2013-09 | Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions |
| 08/30182457 DC : DRAFT JULY 2008 | BS EN 10208-2 - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B |
| 98/712958 DC : DRAFT AUG 1998 | PREN 10305-4 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| 15/30327651 DC : 0 | BS EN 12438 - MAGNESIUM AND MAGNESIUM ALLOYS - MAGNESIUM ALLOYS FOR CAST ANODES |
| 15/30324988 DC : 0 | BS EN 10305-6 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| 07/30164617 DC : 0 | BS EN 10152 - ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| 97/703009 DC : 0 | PREN 10208-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
| 03/306636 DC : DRAFT APR 2003 | EN 13674-3 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 3: CHECK RAILS |
| PREN 10217-5 : DRAFT 2009 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| 05/30135488 DC : DRAFT JUN 2005 | EN 10292 ED 2 - CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STEELS WITH HIGHER YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| 00/713958 DC : 0 | PREN 10138-2 - PRESTRESSING STEELS - PART 2: WIRE |
| BS EN 10169 : 2010 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10025-5:2011-04 (Draft) | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
| 05/30132598 DC : DRAFT APR 2005 | EN 10083-2 - STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOYS STEELS |
| I.S. EN 10025-5:2004 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
| UNI EN 10270-3 : 2011 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 3: STAINLESS SPRING STEEL WIRE |
| PREN 10025-1 : DRAFT 2011 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| BS EN 10025-6 : 2004 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION |
| UNI EN ISO 3183 : 2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| PREN 1559-1 : DRAFT 2009 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
| I.S. EN 10343:2009 | STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS |
| EN 10025-5:2004 | Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance |
| I.S. EN 10253-4:2008 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| ISO 11973:2015 | Heat-resistant cast steels and alloys for general applications |
| 16/30258472 DC : 0 | BS EN 14811 - RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
| DIN EN 14811 E : 2019 | Railway applications - Track - Special purpose rail - Grooved rails and associated construction profiles; German version EN 14811:2019 |
| UNI EN 10169 : 2012 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| 17/30353548 DC : 0 | BS EN 10277 - BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10217-2:2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| 17/30346732 DC : 0 | BS EN 10225-4 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
| UNI EN 10088-4 : 2009 | STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| UNE-EN 50216-10:2010 | Power transformer and reactor fittings - Part 10: Oil-to-air heat exchangers |
| PREN 10338 : DRAFT 2013 | HOT ROLLED AND COLD ROLLED NON-COATED FLAT PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| CEI EN 50216-10 : 2010 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 10: OIL-TO-AIR HEAT EXCHANGERS |
| PREN 10088-1 : DRAFT 2011 | STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
| PREN 10149-1 : DRAFT 2011 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL DELIVERY CONDITIONS |
| BS EN 13674-4 : 2006 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
| DIN EN 1561:2012-01 | Founding - Grey cast irons; German version EN 1561:2011 |
| EN ISO 4957:1999 | Tool steels (ISO 4957:1999) |
| EN 10217-4:2002/A1:2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| I.S. EN 10088-4:2009 | STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| I.S. EN 10083-3:2006 | STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| I.S. EN 10253-3:2008 | BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS |
| DIN EN 10213:2016-10 | STEEL CASTINGS FOR PRESSURE PURPOSES |
| DIN EN 13674-3:2010-12 | Railway applications - Track - Rail - Part 3: Check rails (includes Amendment A1:2010) |
| DIN EN 10025-1:2011-04 (Draft) | Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version prEN 10025-1:2011 |
| DIN EN 10083-1 E : 2006 | STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10216-1:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| BS EN 10269:2013 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| BS EN 10297-1:2003 | Seamless circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Non-alloy and alloy steel tubes |
| BS EN 13229 : 2001 | INSET APPLIANCES INCLUDING OPEN FIRES FIRED BY SOLID FUELS - REQUIREMENTS AND TEST METHODS |
| BS EN 10296-1:2003 | Welded circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Non-alloy and alloy steel tubes |
| DIN EN 10296-1:2004-02 | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
| BS EN 10208-1:2009 | Steel pipes for pipelines for combustible fluids. Technical delivery conditions Pipes of requirement class A |
| BS EN 10088-2:2014 | Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| UNE-EN 10088-1:2015 | Stainless steels - Part 1: List of stainless steels |
| BS EN 10294-1:2005 | Hollow bars for machining. Technical delivery conditions Non alloy and alloy steels |
| BS EN 10210-1:2006 | Hot finished structural hollow sections of non-alloy and fine grain steels Technical delivery requirements |
| BS EN 10216-1:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties |
| UNE-EN 1561:2012 | Founding - Grey cast irons |
| BS EN 10268 : 2006 | COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| UNE-EN 10273:2016 | Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
| UNE-EN 10222-1:2017 | Steel forgings for pressure purposes - Part 1: General requirements for open die forgings |
| BS EN 10130:2006 | Cold rolled low carbon steel flat products for cold forming. Technical delivery conditions |
| BS EN 10225:2009 | Weldable structural steels for fixed offshore structures. Technical delivery conditions |
| BS EN 10113-3:1993 | Hot-rolled products in weldable fine grain structural steels Delivery conditions for thermomechanical rolled steels |
| BS EN 10132-1:2000 | Cold rolled narrow steel strip for heat treatment. Technical delivery conditions General |
| BS EN 10088-1:2014 | Stainless steels List of stainless steels |
| BS EN 10305-4:2016 | Steel tubes for precision applications. Technical delivery conditions Seamless cold drawn tubes for hydraulic and pneumatic power systems |
| BS EN 10222-1:2017 | Steel forgings for pressure purposes General requirements for open die forgings |
| BS EN 10213 : 2007 | STEEL CASTINGS FOR PRESSURE PURPOSES |
| BS EN 10302:2008 | Creep resisting steels, nickel and cobalt alloys |
| BS EN ISO 4957:2000 | Tool steels |
| UNE-EN 303-5:2013 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
| BS EN 10273:2016 | Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
| BS EN 10151:2002 | Stainless steel strip for springs. Technical delivery conditions |
| BS EN 10219-1:2006 | Cold formed welded structural hollow sections of non-alloy and fine grain steels Technical delivery requirements |
| BS EN 10277-1:2008 | Bright steel products. Technical delivery conditions General |
| BS EN 10169-1:2003 | Continuously organic coated (coil coated) steel flat products General information (definitions, materials, tolerances, test methods) |
| BS EN 10152:2017 | Electrolytically zinc coated cold rolled steel flat products for cold forming. Technical delivery conditions |
| BS EN 303-1:2017 | Heating boilers Heating boilers with forced draught burners. Terminology, general requirements, testing and marking |
| BS EN 12421:2017 | Magnesium and magnesium alloys. Unalloyed magnesium |
| DIN EN 10294-1:2005-12 | Hollow bars for machining - Technical delivery conditions - Part 1: Non alloy and alloy steels |
| BS EN 10292:2007 | Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming. Technical delivery conditions |
| DIN EN 10312:2005-12 | Welded stainless steel tubes for the conveyance of water and other aqueous liquids - Technical delivery conditions; German version EN 10312:2002 + A1:2005 |
| EN 10084:2008 | Case hardening steels - Technical delivery conditions |
| DIN EN 10336:2007-07 | CONTINUOUSLY HOT-DIP COATED AND ELECTROLYTICALLY COATED STRIP AND SHEET OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| EN 10216-4:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties |
| EN 10305-1:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes |
| EN 10270-3:2011 | Steel wire for mechanical springs - Part 3: Stainless spring steel wire |
| EN 12815:2001/A1:2004/AC:2007 | RESIDENTIAL COOKERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| EN 10336:2007 | Continuously hot-dip coated and electrolytically coated strip and sheet of multiphase steels for cold forming - Technical delivery conditions |
| EN 10106:2015 | Cold rolled non-oriented electrical steel strip and sheet delivered in the fully processed state |
| EN 10087:1998 | Free-cutting steels - Technical delivery conditions for semi-finished products, hot-rolled bars and rods |
| DIN EN 10326:2004-09 | CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
| EN 12284 : 2003 | REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING |
| DIN EN 10255:2007-07 | Non-alloy steel tubes suitable for welding and threading - Technical delivery conditions (includes Amendment A1:2007) |
| DIN EN 10327:2004-09 | CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF LOW CARBON STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| EN 10142 : 2000 | CONTINUOUSLY HOT-DIP ZINC COATED LOW CARBON STEELS SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| ONORM EN 10253-2 : 2008 | BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| EN 10137-1 : 1995 | PLATES AND WIDE FLATS MADE OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED OR PRECIPITATION HARDENED CONDITIONS - GENERAL DELIVERY CONDITIONS |
| EN 10213:2007+A1:2016 | Steel castings for pressure purposes |
| EN 10215 : 1995 | CONTINUOUSLY HOT-DIP ALUMINIUM-ZINC (AZ) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10296-2:2006-02 | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
| EN 10294-2:2012 | Hollow bars for machining - Technical delivery conditions - Part 2: Stainless steels with specified machinability properties |
| EN 10346:2015 | Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions |
| EN 10088-5:2009 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
| EN 10343:2009 | Steels for quenching and tempering for construction purposes - Technical delivery conditions |
| EN 10208-2:2009 | Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B |
| EN 10338:2015 | Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions |
| DIN EN 10219-1:2006-07 | Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
| EN 10341:2006 | Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state |
| EN 10169-1:2003 | Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods) |
| EN 10216-3:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
| EN 10095:1999 | Heat resisting steels and nickel alloys |
| EN 10305-4:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems |
| EN 10250-1:1999 | Open die steel forgings for general engineering purposes - Part 1: General requirements |
| EN 10151:2002 | Stainless steel strip for springs - Technical delivery conditions |
| EN 10126 : 1995 | COLD ROLLED ELECTRICAL NON-ALLOYED STEEL SHEET AND STRIP DELIVERED IN THE SEMI-PROCESSED STATE |
| DIN EN 1993-5:2010-12 | Eurocode 3: Design of steel structures - Part 5: Piling (includes Corrigendum AC:2009) |
| EN 10089:2002 | Hot-rolled steels for quenched and tempered springs - Technical delivery conditions |
| EN 10267:1998 | Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures |
| EN 10302:2008 | Creep resisting steels, nickel and cobalt alloys |
| EN 10154 : 2002 | CONTINUOUSLY HOT-DIP ALUMINIUM-SILICON (AS) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10294-2:2012-04 | Hollow bars for machining - Technical delivery conditions - Part 2: Stainless steels with specified machinability properties |
| DIN EN 10305-4:2016-08 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| DIN EN 13674-2:2011-01 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| DIN EN 10111:2008-06 | CONTINUOUSLY HOT ROLLED LOW CARBON STEEL SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| EN 50112:1994 | Measurement, control, regulation - Electrical temperature sensors - Metal protecting tubes for TC assemblies |
| EN 10255:2004+A1:2007 | Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions |
| EN 50216-10:2009 | Power transformer and reactor fittings - Part 10: Oil-to-air heat exchangers |
| EN 50216-9:2009 | Power transformer and reactor fittings - Part 9: Oil-to-water heat exchangers |
| DIN EN 10154:2002-08 | CONTINUOUSLY HOT-DIP ALUMINIUM-SILICON (AS) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10341:2006-08 | COLD ROLLED ELECTRICAL NON-ALLOY AND ALLOY STEEL SHEET AND STRIP DELIVERED IN THE SEMI-PROCESSED STATE |
| DIN EN 13835:2012-04 | FOUNDING - AUSTENITIC CAST IRONS |
| UNE-EN 13674-2:2007 | Railway applications - Track - Rail - Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above |
| UNE-EN 13674-3:2007 | Railway applications - Track - Rail - Part 3: Check rails |
| EN 10079:2007 | Definition of steel products |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 10020:2000 | Definition and classification of grades of steel |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.