We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
  • EN 10028-7:2016

    Current The latest, up-to-date edition.
    Add to Watchlist
    This Standard has been added successfully to your Watchlist.
    Please visit My Watchlist to see all standards that you are watching.
    Please log in or to add this standard to your Watchlist.
    We could not add this standard to your Watchlist.
    Please retry or contact support for assistance.
    You need to be logged in to add this standard to your Watchlist.
    Please log in now or create an account to add.
    You already added this Product in the Watchlist.

    Flat products made of steels for pressure purposes - Part 7: Stainless steels

    Available format(s): 

    Language(s): 

    Published date:  13-07-2016

    Publisher:  Comite Europeen de Normalisation

    Add to Watchlist
    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    European foreword
    Introduction
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Tolerances on dimensions
    5 Calculation of mass
    6 Classification and designation
    7 Information to be supplied by the purchaser
    8 Requirements
    9 Inspection
    10 Sampling
    11 Test methods
    12 Marking
    Annex A (informative) - Guidelines for further
            treatment (including heat treatment in
            fabrication)
    Annex B (informative) - Post weld heat treatment
    Annex C (informative) - Preliminary reference
            data for the tensile strength of austenitic-ferritic
            steels at elevated temperatures
    Annex D (informative) - Reference data of strength
            values for 1% (plastic) creep strain and
            creep rupture
    Annex E (informative) - Reference data on
            mechanical properties of austenitic steels at
            room temperature and at low temperatures
    Annex F (informative) - Significant changes to
            the version EN 10028-7:2007
    Annex ZA (informative) - Relationship between
             this European Standard and the Essential
             Requirements of Directive 2014/68/EU
    Bibliography

    Abstract - (Show below) - (Hide below)

    This European Standard specifies requirements for flat products for pressure purposes made of stainless steels, including austenitic creep resisting steels, in thicknesses as indicated in Tables 7 to 10.The requirements of EN 10028-1:2007+A1:2009 also apply.NOTE 1The steel grades covered by this European Standard have been selected from EN 10088-1.NOTE 2Once this European Standard is published in the Official Journal of the European Union (OJEU) under Directive 97/23/EC, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 97/23/EC is limited to technical data of materials in this European Standard (Part 1 and Part 7) and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of the Pressure Equipment Directive are satisfied, needs to be done.

    General Product Information - (Show below) - (Hide below)

    Committee CEN/TC 459/SC 7
    Development Note Supersedes EURONORM 28. (07/2004) Supersedes PREN 10028-7. (07/2016)
    Document Type Standard
    Publisher Comite Europeen de Normalisation
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    15/30320783 DC : 0 BS EN 1439 - LPG EQUIPMENT AND ACCESSORIES - PROCEDURE FOR CHECKING TRANSPORTABLE REFILLABLE LPG CYLINDERS BEFORE, DURING AND AFTER FILLING
    BS EN 1708-3 : 2012 WELDING - BASIC WELD JOINT DETAILS IN STEEL - PART 3: CLAD, BUTTERED AND LINED PRESSURIZED COMPONENTS
    07/30163686 DC : 0 BS EN 1440 - LPG EQUIPMENT AND ACCESSORIES - PERIODIC INSPECTION OF TRANSPORTABLE REFILLABLE LPG CYLINDERS
    07/30163689 DC : 0 BS EN 1439 - LPG EQUIPMENT AND ACCESSORIES - PROCEDURE FOR CHECKING LPG CYLINDERS BEFORE, DURING AND AFTER FILLING
    BS EN 12693:2008 Refrigerating systems and heat pumps. Safety and environmental requirements. Positive displacement refrigerant compressors
    05/30132854 DC : DRAFT APR 2005 EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
    EN 13445-10 : 2015 UNFIRED PRESSURE VESSELS - PART 10: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF NICKEL AND NICKEL ALLOYS
    10/30227442 DC : 0 BS EN ISO 13710 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RECIPROCATING POSITIVE DISPLACEMENT PUMPS
    PREN ISO 10380 : DRAFT 2011 PIPEWORK - CORRUGATED METAL HOSES AND HOSE ASSEMBLIES
    DIN EN 16617:2015-07 PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING
    API 674 : 2010 : ERR 1 : 2014 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
    API 674 : 2010 : INC : ERR 1 : 2015 : R2016 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
    BS ISO 21009-1:2008 Cryogenic vessels — Static vacuum-insulated vessels Part 1: Design, fabrication, inspection and tests
    17/30360051 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    04/30116297 DC : DRAFT JUL 2004 ISO 20826 - ROAD VEHICLES - AUTOMOTIVE LPG COMPONENTS - CONTAINERS
    BS EN 10253-4:2008 Butt-welding pipe fittings Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
    PREN 14140 : DRAFT 2012 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
    BS EN 14917 : 2009 METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
    ISO 9328-7:2018 Steel flat products for pressure purposes — Technical delivery conditions — Part 7: Stainless steels
    EN 14917:2009+A1:2012 METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
    PD CEN/TR 14585-3:2017 CORRUGATED METAL HOSE ASSEMBLIES FOR PRESSURE APPLICATIONS - PART 3: DESIGN METHOD
    16/30319005 DC : 0 BS EN 12285-1 - WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NONFLAMMABLE WATER POLLUTING LIQUIDS OTHER THAN FOR HEATING AND COOLING OF BUILDINGS
    BS ISO 20421-1:2006 Cryogenic vessels. Large transportable vacuum-insulated vessels Design, fabrication, inspection and testing
    BS EN ISO 4126-2:2003 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 2: BURSTING DISC SAFETY DEVICES
    17/30362892 DC : 0 BS EN 14025 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION
    EN ISO 22825:2017 NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING - TESTING OF WELDS IN AUSTENITIC STEELS AND NICKEL-BASED ALLOYS (ISO 22825:2017)
    BS EN 13480-2:2017 Metallic industrial piping Materials
    DIN EN 14197-2:2006-11 CRYOGENIC VESSELS - STATIC NON-VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING
    DIN EN 1759-1:2005-02 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
    BS EN 15266:2007 Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar
    DIN EN 15266 E : 2007 STAINLESS STEEL PLIABLE CORRUGATED TUBING KITS IN BUILDINGS FOR GAS WITH AN OPERATING PRESSURE UP TO 0,5 BAR
    BS EN ISO 13709:2003 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
    BS EN 14208:2004 Transportable gas cylinders. Specification for welded pressure drums up to 1000 litre capacity for the transport of gases. Design and construction
    UNE-EN ISO 10380:2013 Pipework - Corrugated metal hoses and hose assemblies (ISO 10380:2012)
    I.S. EN 14276-1:2006 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
    EN ISO 21028-1:2016 (edition 2) Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 C (ISO 21028-1:2016)
    DIN EN 14914:2006-03 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - ALTERNATIVE DESIGN AND CONSTRUCTION; PERIODIC INSPECTION
    EN 10253-4:2008/AC:2009 BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
    DIN EN 1439:2017-10 LPG equipment and accessories - Procedure for checking transportable refillable LPG cylinders before, during and after filling
    EN 12952-2:2011 Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
    EN 12952-14 : 2004 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 14: REQUIREMENTS FOR FLUE GAS DENOX-SYSTEMS USING LIQUEFIED PRESSURIZED AMMONIA AND AMMONIA WATER SOLUTION
    EN 10088-2:2014 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
    DIN EN 12952-14:2004-09 Water-tube boilers and auxiliary installations - Part 14: Requirements for fluegas DENOX systems using liquified pressurized ammonia and ammonia water solution
    EN 12285-2 : 2005 WORKSHOP FABRICATED STEEL TANKS - PART 2: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE ABOVEGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS
    EN 10088-4:2009 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
    EN 13458-2:2002/AC:2006 CRYOGENIC VESSELS - STATIC VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING
    EN 10253-3:2008 Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
    EN 13322-2:2003/A1:2006 TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 2: STAINLESS STEEL
    EN 1439:2017 LPG equipment and accessories - Procedure for checking transportable refillable LPG cylinders before, during and after filling
    I.S. EN 12284:2003 REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING
    EN 12693:2008 Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors
    EN 10357:2013 Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
    EN 13530-2:2002/AC:2006 CRYOGENIC VESSELS - LARGE TRANSPORTABLE VACUUM-INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING
    EN 10028-1:2017 Flat products made of steels for pressure purposes - Part 1: General requirements
    DIN EN 1708-3:2012-05 Welding - Basic weld joint details in steel - Part 3: Clad, buttered and lined pressurized components
    DIN EN 14917:2012-06 Metal bellows expansion joints for pressure applications (includes Amendment A1:2012)
    UNI EN 1708-3 : 2012 WELDING - BASIC WELD JOINT DETAILS IN STEEL - PART 3: CLAD, BUTTERED AND LINED PRESSURIZED COMPONENTS
    17/30351224 DC : 0 BS EN 14276-1 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
    BS EN 16617:2015 Pipework. Corrugated metal hose assemblies for combustible gas. Performance requirements, testing and marking
    UNI EN 10217-7 : 2014 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES
    11/30249105 DC : 0 BS EN 12516-1 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS
    PREN 10088-2 : DRAFT 2011 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
    BS EN 13445-10:2015 (published 2016-01) Unfired pressure vessels Additional requirements for pressure vessels of nickel and nickel alloys
    DD ISO/TS 15510:2003 Stainless steels. Chemical composition
    API 674 : 2010 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
    ISO 4126-2:2003 Safety devices for protection against excessive pressure Part 2: Bursting disc safety devices
    I.S. EN 13445-10:2015 UNFIRED PRESSURE VESSELS - PART 10: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF NICKEL AND NICKEL ALLOYS
    BS EN 13445-2 : 2014 UNFIRED PRESSURE VESSELS - PART 2: MATERIALS
    I.S. EN 16617:2015 PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING
    DIN EN 16728 E : 2016 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE LPG CYLINDERS OTHER THAN TRADITIONAL WELDED AND BRAZED STEEL CYLINDERS - PERIODIC INSPECTION
    BS ISO 20421-1:2019 Cryogenic vessels. Large transportable vacuum-insulated vessels Design, fabrication, inspection and testing
    UNE-EN 10088-4:2010 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
    EN ISO 4126-2:2003/AC:2006 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 2: BURSTING DISC SAFETY DEVICES
    EN 10088-1:2014 STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS
    DIN EN 10216-5:2014-03 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
    DIN EN 12284:2004-01 Refrigerating systems and heat pumps - Valves - Requirements, testing and marking
    DIN EN 12285-2:2005-05 WORKSHOP FABRICATED STEEL TANKS - PART 2: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE ABOVEGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS
    DIN EN 10302:2008-06 Creep resisting steels, nickel and cobalt alloys
    DIN EN 15266:2007-08 Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar
    BS EN ISO 10380:2012 Pipework. Corrugated metal hoses and hose assemblies
    BS EN 890:2012 Chemicals used for treatment of water intended for human consumption. Iron (III) sulfate solution
    BS EN 13322-2:2003 Transportable gas cylinders. Refillable welded steel gas cylinders. Design and construction Stainless steel
    BS EN 14197-2 : 2003 CRYOGENIC VESSELS - STATIC NON-VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING
    I.S. EN ISO 10380:2012 PIPEWORK - CORRUGATED METAL HOSES AND HOSE ASSEMBLIES (ISO 10380:2012)
    DIN EN 10028-1:2017-10 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS
    I.S. EN 1439:2017 LPG EQUIPMENT AND ACCESSORIES - PROCEDURE FOR CHECKING LPG CYLINDERS BEFORE, DURING AND AFTER FILLING
    I.S. EN 10216-5:2013 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES
    I.S. EN 10088-2:2014 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
    I.S. EN 10217-7:2014 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES
    DIN EN 10088-1:2014-12 STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS
    DIN EN 13611:2019-06 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
    DIN EN 10088-2:2014-12 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
    I.S. EN 14140:2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
    I.S. EN 10088-1:2014 STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS
    I.S. EN 12952-2:2011 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
    I.S. EN 890:2012 CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - IRON (3) SULFATE SOLUTION
    I.S. EN 10028-1:2017 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS
    I.S. EN 14398-2:2003 CRYOGENIC VESSELS - LARGE TRANSPORTABLE NON-VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING
    I.S. EN 10302:2008 CREEP RESISTING STEELS, NICKEL AND COBALT ALLOYS
    KTA 3507 : 2014(R2017) FACTORY TESTS, POST-REPAIR TESTS AND CERTIFICATION OF SATISFACTORY PERFORMANCE IN SERVICE OF MODULES AND DEVICES FOR THE INSTRUMENTATION AND CONTROLS OF THE SAFETY SYSTEM
    KTA 3407 : 2014 PIPE PENETRATIONS THROUGH THE REACTOR CONTAINMENT VESSEL
    KTA 3702 : 2014(R2017) EMERGENCY POWER GENERATING FACILITIES WITH DIESEL-GENERATOR UNITS IN NUCLEAR POWER PLANTS
    NF EN 12952-2 : 2011 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
    ASME PV CODE 2A : 2017 BOILER AND PRESSURE VESSEL CODE - MATERIALS - FERROUS MATERIAL SPECIFICATIONS (BEGINNING TO SA-450) AND (SA-451 TO END)
    11/30218155 DC : 0 BS EN ISO 10380 - PIPEWORK - CORRUGATED METAL HOSES AND HOSE ASSEMBLIES
    13/30281974 DC : 0 BS EN 16617 - PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING
    05/30135337 DC : DRAFT JUN 2005 EN 15266 - STAINLESS STEEL PLIABLE CORRUGATED TUBING SYSTEMS IN BUILDINGS FOR GAS WITH AN OPERATING PRESSURE UP TO 0,5 BAR
    02/712507 DC : DRAFT OCT 2002 EN 14585 - PRESSURISED CORRUGATED METAL HOSE ASSEMBLIES
    BS EN 10253-3:2008 Butt-welding pipe fittings Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
    12/30255878 DC : 0 BS ISO 17885 - PLASTICS PIPING SYSTEMS - MECHANICAL FITTINGS FOR PRESSURE PIPING SYSTEMS - SPECIFICATIONS
    API 674 REDLINE : 2010 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
    UNI EN 12693 : 2008 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
    16/30319008 DC : 0 BS EN 12285-3 - WORKSHOP FABRICATED STEEL TANKS - PART 3: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NONFLAMMABLE WATER POLLUTING LIQUIDS FOR HEATING AND COOLING OF BUILDINGS
    I.S. EN 14913:2006 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - ALTERNATIVE DESIGN AND CONSTRUCTION; PROCEDURE FOR CHECKING BEFORE, DURING AND AFTER FILLING
    EN 10217-7:2014 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
    ONORM EN ISO 4126-2 : 2006 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 2: BURSTING DISC SAFETY DEVICES
    PREN 1439 : DRAFT 2015 LPG EQUIPMENT AND ACCESSORIES - PROCEDURE FOR CHECKING TRANSPORTABLE REFILLABLE LPG CYLINDERS BEFORE, DURING AND AFTER FILLING
    DIN EN 10357 E : 2014 AUSTENITIC, AUSTENITIC-FERRITIC AND FERRITIC LONGITUDINALLY WELDED STAINLESS STEEL TUBES FOR THE FOOD AND CHEMICAL INDUSTRY
    ISO/TS 15510:2003 Stainless steels Chemical composition
    09/30196511 DC : 0 BS ISO 9328-7 - STEEL FLAT PRODUCTS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEELS
    02/710460 DC : DRAFT AUG 2002 ISO/DIS 21028-1 - CRYOGENIC VESSELS - TOUGHNESS REQUIREMENTS FOR MATERIALS AT CRYOGENIC TEMPERATURE - PART 1: TEMPERATURES BELOW -80 DEGREES C
    DIN EN 10253-4:2008-06 BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
    11/30254171 DC : 0 BS EN 10088-2 - STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
    04/30111682 DC : DRAFT MARCH 2004 EN 14913 - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - ALTERNATIVE DESIGN AND CONSTRUCTION - PROCEDURE FOR CHECKING BEFORE, DURING AND AFTER FILLING
    18/30350515 DC : 0 BS ISO 20421-1 - CRYOGENIC VESSELS - LARGE TRANSPORTABLE VACUUM-INSULATED VESSELS - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTING
    UNI EN 10216-5 : 2014 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES
    API 610 : 2010 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
    BS EN 13611:2015 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements
    12/30248681 DC : 0 BS EN 14140 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
    01/715451 DC : DRAFT NOV 2001 PREN 10088-2 - STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL AND CONSTRUCTION PURPOSES
    05/30132920 DC : DRAFT APR 2005 EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR THE EXECUTION OF STEEL STRUCTURES
    09/30207521 DC : 0 BS EN 10217-7 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES
    04/30118252 DC : DRAFT AUG 2004 EN 14917 - METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
    BS EN 10357:2013 Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
    14/30260020 DC : 0 BS EN 12285-1 - WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NONFLAMMABLE WATER POLLUTING LIQUIDS
    CEN/TR 15623 : 2008 FOOD PROCESSING MACHINERY - ROUTE MAP - MATERIALS FOR FOOD AREA
    05/30126202 DC : 0 EN 10088-4 - STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
    PREN 12285-1 : DRAFT 2016 WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NONFLAMMABLE WATER POLLUTING LIQUIDS OTHER THAN FOR HEATING AND COOLING OF BUILDINGS
    DIN EN 14917 E : 2012 METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
    UNI EN 10253-4 : 2009 BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
    16/30345944 DC : 0 BS EN ISO 22825 - NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING - TESTING OF WELDS IN AUSTENITIC STEELS AND NICKEL-BASED ALLOYS
    DIN EN 16728:2016-07 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE LPG CYLINDERS OTHER THAN TRADITIONAL WELDED AND BRAZED STEEL CYLINDERS - PERIODIC INSPECTION
    I.S. EN 10357:2013 AUSTENITIC, AUSTENITIC-FERRITIC AND FERRITIC LONGITUDINALLY WELDED STAINLESS STEEL TUBES FOR THE FOOD AND CHEMICAL INDUSTRY
    S.R. CEN TR 15623:2008 FOOD PROCESSING MACHINERY - ROUTE MAP - MATERIALS FOR FOOD AREA
    BS EN 16728 : 2016 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE LPG CYLINDERS OTHER THAN TRADITIONAL WELDED AND BRAZED STEEL CYLINDERS - PERIODIC INSPECTION
    UNE-EN 13445-10:2016 Unfired pressure vessels - Part 10: Additional requirements for pressure vessels of nickel and nickel alloys
    EN 13445-2:2014/A2:2018 UNFIRED PRESSURE VESSELS - PART 2: MATERIALS
    UNI EN 1092-1 : 2013 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
    KTA 3211.1 : 2015 PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS
    DIN EN 1092-1:2016-05 (Draft) FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
    PREN 10217-7 : DRAFT 2009 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES
    ISO 22825:2017 Non-destructive testing of welds — Ultrasonic testing — Testing of welds in austenitic steels and nickel-based alloys
    EN 14025:2013+A1:2016 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION
    BS EN 14025 : 2013 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION
    ISO 20421-1:2006 Cryogenic vessels Large transportable vacuum-insulated vessels Part 1: Design, fabrication, inspection and testing
    UNE-EN 10088-2:2015 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
    I.S. EN 14917:2009 METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
    DIN EN 890:2012-09 CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - IRON (3) SULFATE SOLUTION
    DIN EN 14276-1:2011-05 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
    DIN EN 14140:2015-03 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
    BS EN 10217-7:2014 (published 2014-10) Welded steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes
    BS EN 1503-1:2000 VALVES - MATERIALS FOR BODIES, BONNETS AND COVERS - PART 1: STEELS SPECIFIED IN EUROPEAN STANDARDS
    EN 14276-1:2020 (edition 2) Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
    UNI EN 14276-1 : 2011 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
    EN 14208:2004 Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction
    UNI EN 14398-2 : 2008 CRYOGENIC VESSELS - LARGE TRANSPORTABLE NON-VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING
    UNI EN 12952-2 : 2011 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
    UNI EN 1106 : 2010 MANUALLY OPERATED TAPS FOR GAS BURNING APPLIANCES
    UNI EN 890 : 2013 CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - IRON (3) SULFATE SOLUTION
    UNI EN ISO 10380 : 2012 PIPEWORK - CORRUGATED METAL HOSES AND HOSE ASSEMBLIES
    UNI EN 10088-2:2014 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
    UNI EN 14140 : 2015 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
    UNI EN 1854 : 2010 PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES
    UNI EN 10302 : 2008 CREEP RESISTING STEELS, NICKEL AND COBALT ALLOYS
    UNI EN 10088-1 : 2014 STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS
    UNI EN 13458-2 : 2004 CRYOGENIC VESSELS - STATIC VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING
    UNI EN 13530-2 : 2004 CRYOGENIC VESSELS - LARGE TRANSPORTABLE VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING
    BS ISO 20826:2006 Automotive LPG components. Containers
    I.S. EN 14914:2006 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - ALTERNATIVE DESIGN AND CONSTRUCTION - PERIODIC INSPECTION
    DIN EN 10088-4:2010-01 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
    03/108196 DC : 0 EN 10253-4 - BUTT WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC & AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
    EN 10216-5:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
    14/30297536 DC : 0 BS EN 16728 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE LPG CYLINDERS OTHER THAN WELDED AND BRAZED STEEL CYLINDERS - PERIODIC INSPECTION
    UNI EN 12516-1 : 2014 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS
    04/30115844 DC : DRAFT JUNE 2004 ISO/DIS 20421-1 - CRYOGENIC VESSELS - LARGE TRANSPORTABLE VACUUM INSULATED VESSELS - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTING
    12/30256820 DC : 0 BS EN 10357 - AUSTENITIC, AUSTENITIC-FERRITIC AND FERRITIC LONGITUDINALLY WELDED STAINLESS STEEL TUBES FOR THE FOOD AND CHEMICAL INDUSTRY
    PREN 16617 : DRAFT 2013 PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING
    UNI EN 10253-3 : 2009 BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS
    I.S. EN 13445-2:2014 UNFIRED PRESSURE VESSELS - PART 2: MATERIALS
    DIN 17440:2001-03 STAINLESS STEELS - TECHNICAL DELIVERY CONDITIONS FOR DRAWN WIRE
    PREN 10253-4 : DRAFT 2017 BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC & AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
    I.S. EN 1708-3:2012 WELDING - BASIC WELD JOINT DETAILS IN STEEL - PART 3: CLAD, BUTTERED AND LINED PRESSURIZED COMPONENTS
    DIN EN 10253-3:2009-02 BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS
    UNI EN 14917 : 2012 METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
    DIN EN 13445-10:2016-05 Unfired pressure vessels - Part 10: Additional requirements for pressure vessels of nickel and nickel alloys
    15/30286859 DC : DRAFT JAN 2015 BS EN ISO 21028-1 - CRYOGENIC VESSELS - TOUGHNESS REQUIREMENTS FOR MATERIALS AT CRYOGENIC TEMPERATURE - PART 1: TEMPERATURES BELOW -80 DEGREES C
    06/30153331 DC : DRAFT JULY 2006 BS ISO 21009-1 - CRYOGENIC VESSELS - STATIC VACUUM-INSULATED VESSELS - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTS
    API 674 : 2010(R2016) POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
    UNE-EN 16617:2015 Pipework - Corrugated metal hose assemblies for combustible gas - Performance requirements, testing and marking
    BS EN 10088-4:2009 STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
    I.S. EN ISO 4126-2:2003 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 2: BURSTING DISC SAFETY DEVICES
    API 674 : 2010 : ERR 2 : 2015 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
    API 610 REDLINE : 2010 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
    I.S. EN 12693:2008 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
    I.S. EN 16728:2016 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE LPG CYLINDERS OTHER THAN TRADITIONAL WELDED AND BRAZED STEEL CYLINDERS - PERIODIC INSPECTION
    S.R. CEN/TR 14585-3:2017 CORRUGATED METAL HOSE ASSEMBLIES FOR PRESSURE APPLICATIONS - PART 3: DESIGN METHOD
    EN 1092-1:2018 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges
    BS EN 12516-1 : 2014 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS
    EN 12516-1:2014 Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
    UNE-EN 12516-1:2016 Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
    17/30350291 DC : 0 BS EN 14015 - SPECIFICATION FOR THE DESIGN AND MANUFACTURE OF SITE BUILT, VERTICAL, CYLINDRICAL, FLAT-BOTTOMED, ABOVE GROUND, WELDED, STEEL TANKS FOR THE STORAGE OF LIQUIDS AT AMBIENT TEMPERATURE AND ABOVE
    UNE-EN 13611:2016 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
    UNE-EN 16728:2016 LPG equipment and accessories - Transportable refillable LPG cylinders other than traditional welded and brazed steel cylinders - Periodic inspection
    NF EN 10253-3 : 2009 BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS
    ISO 20826:2006 Automotive LPG components Containers
    I.S. EN 13611:2015 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    EN 12480:2018 Gas meters - Rotary displacement gas meters
    I.S. EN ISO 22825:2017 NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING - TESTING OF WELDS IN AUSTENITIC STEELS AND NICKEL-BASED ALLOYS (ISO 22825:2017)
    I.S. EN 12480:2018 GAS METERS - ROTARY DISPLACEMENT GAS METERS
    I.S. EN 1092-1:2007 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES,FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
    BS EN 13480-2:2017+A3:2018 METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS
    I.S. EN ISO 13709:2009 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
    DIN EN 12952-14 E : 2004 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 14: REQUIREMENTS FOR FLUE GAS DENOX-SYSTEMS USING LIQUEFIED PRESSURIZED AMMONIA AND AMMONIA WATER SOLUTION
    DIN EN 13831:2007-12 Closed expansion vessels with built in diaphragm for installation in water
    DIN EN 14208:2004-05 Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction
    DIN EN 10217-7:2015-01 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
    UNE-EN 14140:2015 LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and construction
    BS EN 12284:2003 REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING
    BS EN 10216-5:2013 (published 2013-12) Seamless steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes
    BS EN 14398-2 : 2003 CRYOGENIC VESSELS - LARGE TRANSPORTABLE NON-VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING
    ISO 21028-1:2016 Cryogenic vessels Toughness requirements for materials at cryogenic temperature Part 1: Temperatures below -80 degrees C
    UNE-EN 12952-2:2012 Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
    BS EN 14140:2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
    BS EN 12952-14:2004 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 14: REQUIREMENTS FOR FLUE GAS DENOX-SYSTEMS USING LIQUEFIED PRESSURIZED AMMONIA AND AMMONIA WATER SOLUTION
    BS EN ISO 15465:2004 (published 2004-05) Pipework. Stripwound metal hoses and hose assemblies
    ISO 13710:2004 Petroleum, petrochemical and natural gas industries Reciprocating positive displacement pumps
    ISO 10380:2012 Pipework — Corrugated metal hoses and hose assemblies
    UNE-EN 1439:2017 LPG equipment and accessories - Procedure for checking transportable refillable LPG cylinders before, during and after filling
    BS EN 13458-2:2002 Cryogenic vessels. Static vacuum insulated vessels Design, fabrication, inspection and testing
    BS EN 14638-1:2006 Transportable gas cylinders. Refillable welded receptacles of a capacity not exceeding 150 litres Welded austenitic stainless steel cylinders made to a design justified by experimental methods
    BS EN ISO 13710:2004 Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps
    ISO 15465:2004 Pipework Stripwound metal hoses and hose assemblies
    EN 14276-1:2006+A1:2011 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
    BS EN 13530-2:2002 Cryogenic vessels. Large transportable vacuum insulated vessels Design, fabrication, inspection and testing
    EN 13480-2:2017 (edition 2) Metallic industrial piping - Part 2: Materials
    BS EN 14276-1 : 2006 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
    UNE-EN 14025:2014 Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction
    BS EN 1759-1:2004 (published 2004-11) Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class-designated Steel flanges, NPS 1/2 to 24
    BS EN 13831:2007 Closed expansion vessels with built-in diaphragm for installation in water
    UNE-EN 10028-1:2017 Flat products made of steels for pressure purposes - Part 1: General requirements
    UNE-EN 10216-5:2014 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
    BS EN 14914:2005 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - ALTERNATIVE DESIGN AND CONSTRUCTION; PERIODIC INSPECTION
    EN ISO 13709:2009 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
    EN ISO 10380:2012 PIPEWORK - CORRUGATED METAL HOSES AND HOSE ASSEMBLIES (ISO 10380:2012)
    EN 15266:2007 Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar
    EN 14398-2:2003+A2:2008 CRYOGENIC VESSELS - LARGE TRANSPORTABLE NON-VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING
    EN 16668:2016+A1:2018 INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES
    EN 14638-1:2006 Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 1: Welded austenitic stainless steel cylinders made to a design justified by experimental methods
    EN ISO 15465 : 2004 PIPEWORK - STRIPWOUND METAL HOSES AND HOSE ASSEMBLIES
    EN 14914:2005 LPG equipment and accessories - Transportable refillable welded steel cylinders for Liquefied Petroleum Gas (LPG) - Alternative design and construction; periodic inspection
    EN 1503-1 : 2000 VALVES - MATERIALS FOR BODIES, BONNETS AND COVERS - PART 1: STEELS SPECIFIED IN EUROPEAN STANDARDS
    EN 1759-1 : 2004 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, CLASS DESIGNATED - PART 1: STEEL FLANGES, NPS 1/2 TO 24
    EN 14913:2005 LPG equipment and accessories - Transportable refillable welded steel cylinders for Liquefied Petroleum Gas (LPG) - Alternative design and construction; procedure for checking before, during and after filling
    EN 1708-3 : 2012 WELDING - BASIC WELD JOINT DETAILS IN STEEL - PART 3: CLAD, BUTTERED AND LINED PRESSURIZED COMPONENTS
    EN 14140:2014/AC:2015 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
    EN 890:2012 CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - IRON (3) SULFATE SOLUTION
    EN 13831 : 2007 CLOSED EXPANSION VESSELS WITH BUILT-IN DIAPHRAGM FOR INSTALLATION IN WATER
    EN 14197-2:2003/AC:2006 CRYOGENIC VESSELS - STATIC NON-VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING
    EN ISO 13710 : 2004 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RECIPROCATING POSITIVE DISPLACEMENT PUMPS
    EN 16617 : 2015 PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING
    03/109805 DC : DRAFT JUNE 2003 EN 0023095 - TRANSPORTABLE GAS CYLINDERS - WELDED AUSTENITIC STAINLESS STEEL CYLINDERS MADE TO A DESIGN JUSTIFIED BY FE OR EXPERIMENTAL METHODS
    PD CR 10313:2000 CLASSIFICATION OF GRADES OF STEEL - EXAMPLES OF CLASSIFICATION RELATED TO EUROPEAN STANDARDS
    CEN/TR 14585-3 : 2017 CORRUGATED METAL HOSE ASSEMBLIES FOR PRESSURE APPLICATIONS - PART 3: DESIGN METHOD
    12/30257022 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS
    16/30336440 DC : DRAFT MAR 2016 BS EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
    UNE-EN ISO 21028-1:2017 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 C (ISO 21028-1:2016)
    PD CEN/TR 15623:2008 FOOD PROCESSING MACHINERY - ROUTE MAP - MATERIALS FOR FOOD AREA
    01/715519 DC : DRAFT NOV 2001 PREN 10088-1 - STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS
    11/30254165 DC : 0 BS EN 10088-1 - STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS
    DIN EN 13445-10 E : 2016 UNFIRED PRESSURE VESSELS - PART 10: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF NICKEL AND NICKEL ALLOYS
    BS EN ISO 21028-1:2016 Cryogenic vessels. Toughness requirements for materials at cryogenic temperature Temperatures below -80 C
    01/703999 DC : DRAFT FEB 2001 EN ISO 10380 PIPEWORK - CORRUGATED METAL HOSES AND HOSE ASSEMBLIES
    DIN EN 16617 E : 2015 PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING
    DIN EN 1439:2015-10 (Draft) LPG EQUIPMENT AND ACCESSORIES - PROCEDURE FOR CHECKING TRANSPORTABLE REFILLABLE LPG CYLINDERS BEFORE, DURING AND AFTER FILLING
    DIN EN 12693:2016-10 (Draft) REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
    UNE-EN 15266:2008 Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar
    PREN 14276-1 : DRAFT 2017 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
    I.S. EN 16668:2016 INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES
    KTA 3205.2 : 2015 COR 2016 COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS - PART 2: COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS FOR PRESSURE AND ACTIVITY-RETAINING COMPONENTS IN SYSTEMS OUTSIDE THE PRIMARY CIRCUIT
    UNI EN 10357 : 2014 AUSTENITIC, AUSTENITIC-FERRITIC AND FERRITIC LONGITUDINALLY WELDED STAINLESS STEEL TUBES FOR THE FOOD AND CHEMICAL INDUSTRY
    I.S. CEN ISO TR 20172:2006 WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS
    ISO 21009-1:2008 Cryogenic vessels — Static vacuum-insulated vessels — Part 1: Design, fabrication, inspection and tests
    I.S. EN 14025:2013 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION
    UNE-EN 13445-2:2015 Unfired pressure vessels - Part 2: Materials
    I.S. EN 12516-1:2014 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS
    I.S. EN ISO 21028-1:2016 CRYOGENIC VESSELS - TOUGHNESS REQUIREMENTS FOR MATERIALS AT CRYOGENIC TEMPERATURE - PART 1: TEMPERATURES BELOW -80 DEGREES C (ISO 21028-1:2016)
    I.S. EN 10253-4:2008 BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
    BS EN ISO 22825:2017 Non-destructive testing of welds. Ultrasonic testing. Testing of welds in austenitic steels and nickel-based alloys
    DIN EN 13611:2016-09 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    DIN EN 12516-1:2015-01 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS
    UNI EN 10088-4 : 2009 STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
    UNI EN ISO 4126-2 : 2003 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - BURSTING DISC SAFETY DEVICES
    PREN 10088-1 : DRAFT 2011 STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS
    PREN 13611 : DRAFT 2017 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    I.S. EN 10088-4:2009 STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
    I.S. EN 10253-3:2008 BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS
    S.R. CR 10313:2000 CLASSIFICATION OF GRADES OF STEEL - EXAMPLES OF CLASSIFICATION RELATED TO EUROPEAN STANDARDS
    DIN EN 12952-2:2011-10 Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
    DIN EN ISO 10380:2013-02 Pipework - Corrugated metal hoses and hose assemblies (ISO 10380:2012)
    DIN EN 14398-2:2008-11 CRYOGENIC VESSELS - LARGE TRANSPORTABLE NON-VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING
    BS EN 10088-2:2014 Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
    UNE-EN 10088-1:2015 Stainless steels - Part 1: List of stainless steels
    BS EN 14913:2005 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - ALTERNATIVE DESIGN AND CONSTRUCTION; PROCEDURE FOR CHECKING BEFORE, DURING AND AFTER FILLING
    BS EN 1439:2017 LPG EQUIPMENT AND ACCESSORIES - PROCEDURE FOR CHECKING TRANSPORTABLE REFILLABLE LPG CYLINDERS BEFORE, DURING AND AFTER FILLING
    BS EN 10088-1:2014 Stainless steels List of stainless steels
    BS EN 12952-2:2011 Water-tube boilers and auxiliary installations Materials for pressure parts of boilers and accessories
    BS EN 10302:2008 CREEP RESISTING STEELS, NICKEL AND COBALT ALLOYS
    BS EN 10028-1:2017 Flat products made of steels for pressure purposes General requirements
    ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries
    BS EN 12285-2:2005 Workshop fabricated steel tanks Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids
    DIN EN 12693:2008-09 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
    EN 12284 : 2003 REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING
    I.S. EN 13611:2015&AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    CR 10313 : 2000 CLASSIFICATION OF GRADES OF STEEL - EXAMPLES OF CLASSIFICATION RELATED TO EUROPEAN STANDARDS
    EN 10302:2008 CREEP RESISTING STEELS, NICKEL AND COBALT ALLOYS
    DIN EN 14140:2017-01 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
    DIN EN 10357:2014-03 Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
    DIN EN ISO 15465:2004-07 Pipework - Stripwound metal hoses and hose assemblies (ISO 15465:2004)
    DIN EN 14638-1:2006-07 Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 1: Welded austenitic stainless steel cylinders made to a design justified by experimental methods
    DIN EN 14913:2006-03 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - ALTERNATIVE DESIGN AND CONSTRUCTION - PROCEDURE FOR CHECKING BEFORE, DURING AND AFTER FILLING

    Standards Referencing This Book - (Show below) - (Hide below)

    EN ISO 9445-2 : 2010 CONTINUOUSLY COLD-ROLLED STAINLESS STEEL - TOLERANCES ON DIMENSIONS AND FORM - PART 2: WIDE STRIP AND PLATE/SHEET
    ISO 9444-2:2009 Continuously hot-rolled stainless steel Tolerances on dimensions and form Part 2: Wide strip and sheet/plate
    EN 10028-1:2017 Flat products made of steels for pressure purposes - Part 1: General requirements
    EN ISO 643:2012 STEELS - MICROGRAPHIC DETERMINATION OF THE APPARENT GRAIN SIZE (ISO 643:2012)
    NFA 36 209 : 1990 IRON AND STEEL PRODUCTS - AUSTENITIC STAINLESS STEELS FOR BOILERS AND PRESSURE VESSELS
    EN ISO 9444-2 : 2010 CONTINUOUSLY HOT-ROLLED STAINLESS STEEL - TOLERANCES ON DIMENSIONS AND FORM - PART 2: WIDE STRIP AND SHEET/PLATE
    EN ISO 18286 : 2010 HOT-ROLLED STAINLESS STEEL PLATES - TOLERANCES ON DIMENSIONS AND SHAPE (ISO 18286:2008)
    DIN 17460:1992-09 HIGH TEMPERATURE AUSTENITIC STEEL PLATE AND SHEET, COLD AND HOT ROLLED STRIP, BARS AND FORGINGS - TECHNICAL DELIVERY CONDITIONS
    ISO 9445-2:2009 Continuously cold-rolled stainless steel Tolerances on dimensions and form Part 2: Wide strip and plate/sheet
    ISO 3651-2:1998 Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid
    ISO 643:2012 Steels Micrographic determination of the apparent grain size
    ISO 18286:2008 Hot-rolled stainless steel plates — Tolerances on dimensions and shape
    PD 6525-1:1990 ELEVATED TEMPERATURE PROPERTIES FOR STEELS FOR PRESSURE PURPOSES - PART 1: STRESS RUPTURE PROPERTIES
    EN 10088-1:2014 STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective