• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 10087:1998

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Free-cutting steels - Technical delivery conditions for semi-finished products, hot-rolled bars and rods
Superseded date

18-02-2022

Published date

23-09-1998

Foreword
1 Scope
2 Normative references
3 Definitions
4 Classification and designation
   4.1 Classification
   4.2 Designation
5 Information to be supplied by the purchaser
   5.1 Mandatory information
   5.2 Options
6 Manufacturing process
   6.1 General
   6.2 Treatment condition at delivery
   6.3 Cast separation
7 Requirements
   7.1 Chemical composition and mechanical properties
   7.2 Weldability
   7.3 Structure
   7.4 Internal soundness
   7.5 Surface quality
   7.6 Dimensions, tolerances on dimensions and shape
8 Inspection and testing
   8.1 Types and contents of inspection documents
   8.2 Specific inspection and testing
9 Marking
Annex A (normative) Ruling section for the mechanical
        properties
Annex B (normative) Supplementary or special requirements
Annex C (informative) Bibliography
Annex D (informative) Dimensional standards applicable to
        products complying with this European Standard

This European Standard gives the technical delivery conditions for: - semi-finished products; - hot-rolled bars (including peeled bars); - rods manufactured from the free-cutting steels listed in table 1. This European Standard covers those groups of free-cutting steels classified as listed in table 1. Note: European Standards for similar steels are listed for information in annex C.

Committee
CEN/TC 459/SC 5
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy

Standards Relationship
NS EN 10087 : 1ED 1999 Identical
UNI EN 10087 : 2000 Identical
BS EN 10087 : 1999-01 Identical
NBN EN 10087 : 1999 Similar to
SN EN 10087 : 1999 Identical
BS EN 10087:1999 Identical
PN EN 10087 : 2000 Identical
UNE-EN 10087:1999 Identical
NEN EN 10087 : 1998 Identical
NBN EN 10087 : 1999 Identical
NF EN 10087 : 1998 Identical
DIN EN 10087:1999-01 Identical
I.S. EN 10087:1999 Identical

13/30281974 DC : 0 BS EN 16617 - PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING
I.S. EN 15001-1:2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
10/30234619 DC : 0 BS EN 14420-2 - HOSE FITTINGS WITH CLAMP UNITS - PART 2: HOSE SIDE PARTS OF HOSE TAIL
DIN EN 16617:2015-07 PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING
ISO 4126-2:2003 Safety devices for protection against excessive pressure Part 2: Bursting disc safety devices
BS EN ISO 4126-2:2003 Safety devices for protection against excessive pressure Bursting disc safety devices
BS EN 14420-5:2013 Hose fittings with clamp units Threaded connections
I.S. EN 10084:2008 CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS
I.S. EN 14424:2013 HOSE FITTINGS WITH SCREWED FERRULES
EN 10277-3:2008 Bright steel products - Technical delivery conditions - Part 3: Free-cutting steels
I.S. EN 12284:2003 REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING
EN 12693:2008 Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors
EN 14423:2013+A1:2016 Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
DIN 86552:2002-04 VALVES, SCREWED BONNET TYPE OF STEEL FOR 24-DEGREE CONNECTION WITH PORT END W ACCORDING TO DIN 3861
DIN EN 15001-1:2011-02 Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
10/30234613 DC : DRAFT NOV 2010 BS EN 14420-4 - HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS
BS EN 16617:2015 Pipework. Corrugated metal hose assemblies for combustible gas. Performance requirements, testing and marking
BS EN 12693:2008 Refrigerating systems and heat pumps. Safety and environmental requirements. Positive displacement refrigerant compressors
I.S. EN 16617:2015 PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING
EN ISO 4126-2:2003/AC:2006 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 2: BURSTING DISC SAFETY DEVICES
DIN EN 12284:2004-01 Refrigerating systems and heat pumps - Valves - Requirements, testing and marking
DIN EN 14422:2013-09 CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES
DIN EN 14424:2013-09 HOSE FITTINGS WITH SCREWED FERRULES
I.S. EN 14420-5:2013 HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS
I.S. EN 10277-3:2008 BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 3: FREE-CUTTING STEELS
DIN EN 13611:2019-06 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
DIN EN 10277-3:2008-06 BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 3: FREE-CUTTING STEELS
I.S. EN 14420-2:2013 HOSE FITTINGS WITH CLAMP UNITS - PART 2: HOSE SIDE PARTS OF HOSE TAIL
DIN EN 14420-5:2013-09 HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS
I.S. EN 14422:2013 CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES
DIN EN 14420-2:2013-09 Hose fittings with clamp units - Part 2: Hose side parts of hose tail
DIN EN 14420-4:2013-09 Hose fittings with clamp units - Part 4: Flange connections
I.S. EN 14420-4:2013 HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS
UNI EN 12693 : 2008 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
06/30146731 DC : 0 EN 10277-3 - BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 3: FREE-CUTTING STEELS
DIN 3489:2001-11 Couplings for compressed air - Claw coupling, 42 mm internal width, without securing nut - Coupling with male, female, hose and closure connection ends, rotary claw couplings, joint ring
17/30347443 DC : DRAFT JUN 2017 BS EN 12480 - GAS METERS - ROTARY DISPLACEMENT GAS METERS
10/30234607 DC : 0 BS EN 14422 - CLAMP TYPE COUPLING ASSEMBLIES FOR LPG TRANSFER HOSES
NF EN 15001-1 : 2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
PREN 14420-4 : DRAFT 2010 HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS
I.S. EN 14423:2013 CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR
DIN EN 14424 E : 2013 HOSE FITTINGS WITH SCREWED FERRULES
DIN EN 14422 E : 2013 CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES
UNI EN 14420-2 : 2013 HOSE FITTINGS WITH CLAMP UNITS - PART 2: HOSE SIDE PARTS OF HOSE TAIL
UNI EN 10083-1 : 2006 STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
UNI EN 1106 : 2010 MANUALLY OPERATED TAPS FOR GAS BURNING APPLIANCES
UNI EN 10277-3 : 2008 BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 3: FREE CUTTING STEELS
UNI EN 14424 : 2013 HOSE FITTINGS WITH SCREWED FERRULES
UNI EN 15001-1 : 2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
UNI EN 10084 : 2008 CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS
UNI EN 1854 : 2010 PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES
UNI EN 14420-5 : 2013 HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS
UNI EN 14422 : 2013 CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES
UNI EN 14420-4 : 2013 HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS
PREN 14420-2 : DRAFT 2010 HOSE FITTINGS WITH CLAMP UNITS - PART 2: HOSE SIDE PARTS OF HOSE TAIL
PREN 14424 : DRAFT 2010 HOSE FITTINGS WITH SCREWED FERRULES
PREN 16617 : DRAFT 2013 PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING
10/30234634 DC : 0 BS EN 14423 - CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR
UNE-EN 16617:2015 Pipework - Corrugated metal hose assemblies for combustible gas - Performance requirements, testing and marking
I.S. EN 12693:2008 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
I.S. EN ISO 4126-2:2003 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 2: BURSTING DISC SAFETY DEVICES
DIN EN 13611:2016-09 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
DIN EN 12693:2016-10 (Draft) REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
I.S. EN 13611:2015 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
UNE-EN 14423:2014 Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
EN 12480:2018 Gas meters - Rotary displacement gas meters
I.S. EN 12480:2018 GAS METERS - ROTARY DISPLACEMENT GAS METERS
DIN EN 10084:2008-06 CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS
BS EN 12284:2003 Refrigerating systems and heat pumps. Valves. Requirements, testing and marking
UNE-EN 15001-1:2010 Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
BS EN 10084 : 2008-06 CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS
BS EN 10277-3:2008 Bright steel products. Technical delivery conditions Free-cutting steels
BS EN 14420-2:2013 Hose fittings with clamp units Hose side parts of hose tail
UNE-EN 14420-5:2014 Hose fittings with clamp units - Part 5: Threaded connections
BS EN 14422:2013 Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses
UNE-EN 14422:2014 Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses
BS EN 14424:2013 Hose fittings with screwed ferrules
BS EN 14420-4:2013 Hose fittings with clamp units Flange connections
UNE-EN 14424:2014 Hose fittings with screwed ferrules
EN 14422:2013 Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses
EN 14420-2:2013 Hose fittings with clamp units - Part 2: Hose side parts of hose tail
EN 15001-1:2009 Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
EN 14420-4:2013 Hose fittings with clamp units - Part 4: Flange connections
EN 14420-5:2013 Hose fittings with clamp units - Part 5: Threaded connections
EN 14424:2013 Hose fittings with screwed ferrules
EN 16617 : 2015 PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING
PD CR 10313:2000 Classification of grades of steel. Examples of classification related to European standards
12/30257022 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS
PREN 14422 : DRAFT 2010 CLAMP TYPE COUPLING ASSEMBLIES FOR LPG TRANSFER HOSES
BS EN 15001-1:2009 Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing
10/30234604 DC : 0 BS EN 14424 - HOSE FITTINGS WITH SCREWED FERRULES
DIN EN 16617 E : 2015 PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING
17/30360051 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
BS EN 13611:2015 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements
UNI EN ISO 4126-2 : 2003 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - BURSTING DISC SAFETY DEVICES
UNE-EN 13611:2016 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
PREN 13611 : DRAFT 2017 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
BS EN 14423:2013+A2:2019 Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
S.R. CR 10313:2000 CLASSIFICATION OF GRADES OF STEEL - EXAMPLES OF CLASSIFICATION RELATED TO EUROPEAN STANDARDS
DIN EN 12693:2008-09 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
EN 10084:2008 Case hardening steels - Technical delivery conditions
EN 12284 : 2003 REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING
I.S. EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
CR 10313:2000 Classification of grades of steel - Examples of classification related to European Standards

EN 10002-1 : 2001 METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE
EN 10052:1993 Vocabulary of heat treatment terms for ferrous products
EN 10079:2007 Definition of steel products
EN 10027-2:2015 DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
EN 10221:1995 Surface quality classes for hot-rolled bars and rods - Technical delivery conditions
EN ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
EURONORM 103 : 1971 MICROSCOPIC DETERMINATION OF THE FERRITE OR AUSTENITIC GRAIN SIZE OF STEELS
EURONORM 60 : 1977 HOT-ROLLED ROUND STEEL FOR GENERAL USE
EURONORM 65 : 1980 HOT-ROLLED ROUND STEEL FOR SCREWS AND RIVETS
EN 10021:2006 General technical delivery conditions for steel products
EURONORM 61 : 1982 HOT-ROLLED HEXAGON STEEL
EURONORM 58 : 1978 HOT-ROLLED FLAT STEEL FOR GENERAL USE
EN 10204:2004 Metallic products - Types of inspection documents
EURONORM 108 : 1972 ROUND STEEL WIRE FOR COLD FORMED SCREWS; DIMENSIONS AND PERMISSIBLE DEVIATIONS
EN 10083-1:2006 Steels for quenching and tempering - Part 1: General technical delivery conditions
EN 10027-1:2016 Designation systems for steels - Part 1: Steel names
EN 10083-2:2006 Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels
EN 10020:2000 Definition and classification of grades of steel
EN 10084:2008 Case hardening steels - Technical delivery conditions
EN 10003-1 : 1994 METALLIC MATERIALS - BRINELL HARDNESS TEST - TEST METHOD
EURONORM 59 : 1978 HOT-ROLLED SQUARE STEEL FOR GENERAL USE
EN 10083-3:2006/AC:2008 STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
ISO 14284:1996 Steel and iron — Sampling and preparation of samples for the determination of chemical composition
EURONORM 17 : 1970 WIRE ROD OF COMMON UNALLOYED STEELS FOR DRAWING; DIMENSIONS AND PERMISSIBLE DEVIATIONS
CR 10260 : 1998 DESIGNATION SYSTEMS FOR STEEL - ADDITIONAL SYMBOLS

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.