• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 10130:2006

Current
Current

The latest, up-to-date edition.

Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions
Published date

06-12-2006

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Designation
5 Requirements
   5.1 Steelmaking and manufacturing processes
   5.2 Deoxidation
   5.3 Chemical composition
   5.4 Delivery conditions
   5.5 Mechanical properties
   5.6 Surface characteristics
        5.6.1 General
        5.6.2 Surface quality
        5.6.3 Surface finish
   5.7 Stretcher strain
        5.7.1 General
        5.7.2 Skin-passed products
        5.7.3 Non-skin-passed products
   5.8 Suitability for surface coating
   5.9 Weldability
   5.10 Tolerances on dimensions and shape
6 Tests
   6.1 General
   6.2 Inspection units
   6.3 Number of tests
   6.4 Sampling
   6.5 Test methods
   6.6 Re-tests
   6.7 Inspection document
7 Marking
8 Packing
9 Disputes
10 Information to be provided by the purchaser at the
   time of enquiry and order
Bibliography

This European Standard applies to cold rolled uncoated low carbon steel flat products in rolled widths equal to or over 600 mm for cold forming, with a minimum thickness of 0,35 mm and, unless otherwise agreed at the time of inquiry and order, equal to or less than 3 mm, delivered in sheet, coil, slit coil, or cut lengths obtained from slit coil or sheet.

It does not apply to cold rolled narrow strip (rolling width < 600 mm) nor to flat cold rolled products for which there is a specific standard, in particular the following:

cold rolled non-grain oriented magnetic steel sheet and strip (EN 10106);

semi-processed steel strip for the construction of magnetic circuits (EN 10126 and EN 10165);

blackplate in coils (EN 10205);

cold rolled flat products in high yield strength steels for cold forming (EN 10268);

cold rolled uncoated non-alloy mild steel narrow strip for cold forming (EN 10139);

cold rolled low carbon steel flat products for vitreous enamelling (EN 10209).

Committee
CEN/TC 459/SC 9
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

Standards Relationship
PN EN 10130 : 2009 Identical
UNE-EN 10130:2008 Identical
NBN EN 10130 : 2007 Identical
DIN EN 10130:2007-02 Identical
NS EN 10130 : 3ED 2006 Identical
NF EN 10130 : 2007 Identical
DIN EN 10130 : 2007-04 Identical
BS EN 10130:2006 Identical
NEN EN 10130 : 2007 Identical
I.S. EN 10130:2006 Identical
SN EN 10130 : 2007 Identical
UNI EN 10130 : 2007 Identical

DIN EN 10131:2006-09 Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape
DIN EN 10152:2009-07 ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
17/30355209 DC : 0 BS EN ISO 18592 - RESISTANCE WELDING - DESTRUCTIVE TESTING OF WELDS - METHOD FOR THE FATIGUE TESTING OF MULTI-SPOT-WELDED SPECIMENS
DIN EN 124-3:2015-09 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 3: GULLY TOPS AND MANHOLE TOPS MADE OF STEEL OR ALUMINIUM ALLOYS
DIN EN 10338:2015-10 Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions
CEI EN 50216-9 : 2010 POWER TRANSFORMER AND REACTOR FITTINGS - PART 9: OIL-TO-WATER HEAT EXCHANGERS
UNI EN ISO 11148-7 : 2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS
I.S. EN 13025-3:2005 PACKAGING - LIGHT GAUGE METAL CONTAINERS - PART 3: REMOVABLE HEAD (OPEN HEAD) ROUND STEEL AND TINPLATE CONTAINERS WITH A NOMINAL CAPACITY OF 20 000 ML, 25 000 ML AND 30 000 ML
07/30117697 DC : 0 BS EN 10338 - HOT ROLLED AND COLD ROLLED NON-COATED FLAT PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
12/30265289 DC : 0 BS EN 12050-1 - WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 1: LIFTING PLANTS FOR WASTEWATER CONTAINING FAECAL MATTER
DIN EN 16509:2014-12 TRANSPORTABLE GAS CYLINDERS - NON-REFILLABLE, SMALL TRANSPORTABLE, STEEL CYLINDERS OF CAPACITIES UP TO AND INCLUDING 120 ML CONTAINING COMPRESSED OR LIQUEFIED GASES (COMPACT CYLINDERS) - DESIGN, CONSTRUCTION, FILLING AND TESTING
BS EN 12693:2008 Refrigerating systems and heat pumps. Safety and environmental requirements. Positive displacement refrigerant compressors
07/30170080 DC : DRAFT AUG 2007 PREN 50131-2-6 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-6: OPENING CONTACTS (MAGNETIC)
04/30123995 DC : DRAFT OCT 2004 EN 50216-10 - POWER TRANSFORMER AND REACTOR FITTINGS - PART 10: OIL-TO-AIR HEAT EXCHANGERS
BS EN 50216-10:2009 Power transformer and reactor fittings Oil-to-air heat exchangers
13/30280398 DC : 0 BS EN 10338 - HOT ROLLED AND COLD ROLLED NON-COATED FLAT PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
08/30175210 DC : DRAFT APR 2008 BS EN 15773 - INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED AND SHERARDIZED STEEL ARTICLES [DUPLEX SYSTEMS] - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES
01/714474 DC : DRAFT NOV 2001 BS EN 14276-1 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
10/30212126 DC : 0 BS EN 845-2 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
PREN 12050-2 : DRAFT 2012 WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PRINCIPLES OF CONSTRUCTION AND TESTING - PART 2: LIFTING PLANTS FOR FAECAL-FREE WASTEWATER
BS EN 16509:2014 Transportable gas cylinders. Non-refillable, small transportable, steel cylinders of capacities up to and including 120 ml containing compressed or liquefied gases (compact cylinders). Design, construction, filling and testing
BS ISO 4148:2004 Road vehicles. Special warning lamps. Dimensions
DIN EN 124-3 E : 2015 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 3: GULLY TOPS AND MANHOLE TOPS MADE OF STEEL OR ALUMINIUM ALLOYS
BS 7541:1992 Specification for temporary protectives for the protection of metal surfaces against corrosion during transport and storage
PD CLC/TS 50131-2-10:2014 Alarm systems. Intrusion and hold-up systems Intrusion detectors. Lock state contacts (magnetic)
PREN 50131-2-10 : DRAFT 2017 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-10: INTRUSION DETECTORS - LOCK STATE CONTACTS (MAGNETIC)
I.S. EN 10169:2010 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS
UNI EN 15773 : 2009 INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED OR SHERARDIZED STEEL ARTICLES (DUPLEX SYSTEMS) - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES
ISO/TS 12928:1999 Lubricants, industrial oils and related products (class L) — Family R (Products for temporary protection against corrosion) - Guidelines for establishing specifications
I.S. EN ISO 9226:2012 CORROSION OF METALS AND ALLOYS - CORROSIVITY OF ATMOSPHERES - DETERMINATION OF CORROSION RATE OF STANDARD SPECIMENS FOR THE EVALUATION OF CORROSIVITY (ISO 9226:2012)
PREN 12050-4 : DRAFT 2012 WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 4: NON-RETURN VALVES FOR FAECAL-FREE WASTEWATER AND WASTEWATER CONTAINING FAECAL MATTER
BS EN ISO 18592:2009 Resistance welding. Destructive testing of welds. Method for the fatigue testing of multispot- welded specimens
EN 15773:2018 Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems] - Specifications, recommendations and guidelines
I.S. EN 15773:2018 INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED OR SHERARDIZED STEEL ARTICLES [DUPLEX SYSTEMS] - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES
DIN EN 14879-1 E : 2005 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 1: TERMINOLOGY, DESIGN AND PREPARATION OF SUBSTRATE
DIN EN 13025-3:2006-01 Packaging - Light gauge metal containers - Part 3: Removable head (open head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml
DIN EN 792-7:2009-12 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS
BS EN 845-2 : 2013 SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
DIN EN 14879-1:2005-12 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate
BS EN 12050-2:2015 Wastewater lifting plants for buildings and sites Lifting plants for faecal-free wastewater
I.S. EN 14276-1:2006 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
BS EN 13218 : 2002 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
BS EN 10169-1:2003 Continuously organic coated (coil coated) steel flat products General information (definitions, materials, tolerances, test methods)
EN 10131:2006 (edition 2) Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape
EN 10268:2006+A1:2013 COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
EN 12050-1:2015 Wastewater lifting plants for buildings and sites - Part 1: Lifting plants for wastewater containing faecal matter
EN 10271:1998 Electrolytically zinc-nickel (ZN) coated steel flat products - Technical delivery conditions
EN 12711 : 2000 STEEL DRUMS - NON-REMOVABLE HEAD (TIGHT HEAD) DRUMS WITH A MINIMUM TOTAL CAPACITY OF 230 L
EN 13008:1999 Steel drums - Removable head (open head) drums with a nominal capacity of 15 l to 62 l
EN 10169-3:2003 Continuously organic coated (coil coated) steel flat products - Part 3: Products for building interior applications
EN 124-3:2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 3: Gully tops and manhole tops made of steel or aluminium alloys
EN 10152:2017 Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions
EN 10162:2003 Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances
I.S. EN 12284:2003 REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING
EN 12693:2008 Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors
EN 12050-2:2015 Wastewater lifting plants for buildings and sites - Part 2: Lifting plants for faecal-free wastewater
EN ISO 9226:2012 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity (ISO 9226:2012)
EN 13025-3:2005 (edition 2) Packaging - Light gauge metal containers - Part 3: Removable head (open head) round steel and tinplate containers with a nominal capacity of 20 000 ml, 25 000 ml and 30 000 ml
EN 12205:2001 Transportable gas cylinders - Non refillable metallic gas cylinders
EN 10169:2010+A1:2012 Continuously organic coated (coil coated) steel flat products - Technical delivery conditions
EN 12050-4:2015 Wastewater lifting plants for buildings and sites - Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter
12/30265298 DC : 0 BS EN 12050-4 - WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 4: NON-RETURN VALVES FOR FAECAL-FREE WASTEWATER AND WASTEWATER CONTAINING FAECAL MATTER
10/30236539 DC : 0 BS EN 442-1 - RADIATORS AND CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
12/30265292 DC : 0 BS EN 12050-2 - WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PRINCIPLES OF CONSTRUCTION AND TESTING - PART 2: LIFTING PLANTS FOR FAECAL-FREE WASTEWATER
BS EN ISO 9226:2012 Corrosion of metals and alloys. Corrosivity of atmospheres. Determination of corrosion rate of standard specimens for the evaluation of corrosivity
I.S. EN 13025-1:2005 PACKAGING - LIGHT GAUGE METAL CONTAINERS - PART 1: NOMINAL FILLING VOLUMES FOR ROUND, CYLINDRICAL AND TAPERED GENERAL USE METAL CONTAINERS UP TO 40 000 ML
16/30323507 DC : 0 BS EN 15773 - INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED OR SHERARDIZED STEEL ARTICLES [DUPLEX SYSTEMS] - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES
I.S. EN 13611:2015 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
ISO 3574:2012 Cold-reduced carbon steel sheet of commercial and drawing qualities
CEI EN 50131-2-6 : 2009 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-6: OPENING CONTACTS (MAGNETIC)
12/30265747 DC : 0 BS EN 845-2 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
12/30257003 DC : 0 BS EN 16509 - TRANSPORTABLE GAS CYLINDERS - NON-REFILLABLE, SMALL TRANSPORTABLE, SEAMLESS STEEL CYLINDERS OF CAPACITIES UP TO 120ML CONTAINING COMPRESSED OR LIQUEFIED GASES (COMPACT CYLINDERS) - DESIGN, FILLING AND TESTING
DIN EN 16028:2012-10 Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications
04/102838 DC : DRAFT JAN 2004 EN 692 - MACHINE TOOLS - MECHANICAL PRESSES - SAFETY
BS EN 10338:2015 Hot rolled and cold rolled non-coated products of multiphase steels for cold forming. Technical delivery conditions
NFL 22-031 : H2003 FASTENERS - SELECTION OF METALLIC MATERIALS
I.S. EN 50216-9:2009 POWER TRANSFORMER AND REACTOR FITTINGS - PART 9: OIL-TO-WATER HEAT EXCHANGERS
I.S. EN 16509:2014 TRANSPORTABLE GAS CYLINDERS - NON-REFILLABLE, SMALL TRANSPORTABLE, STEEL CYLINDERS OF CAPACITIES UP TO AND INCLUDING 120 ML CONTAINING COMPRESSED OR LIQUEFIED GASES (COMPACT CYLINDERS) - DESIGN, CONSTRUCTION, FILLING AND TESTING
BS EN 13611:2015 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements
17/30360051 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
I.S. EN 16028:2012 RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS
I.S. EN 50216-10:2009 POWER TRANSFORMER AND REACTOR FITTINGS - PART 10: OIL-TO-AIR HEAT EXCHANGERS
ISO 9940:2015 Aerospace series Fluid, hydraulic, phosphate ester-base, fire resistant Technical specification
DIN EN 12284:2004-01 Refrigerating systems and heat pumps - Valves - Requirements, testing and marking
DIN EN 693:2011-11 MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES
UNE-EN 442-1:2015 Radiators and convectors - Part 1: Technical specifications and requirements
BS EN 10162:2003 Cold rolled steel sections. Technical delivery conditions. Dimensional and cross-sectional tolerances
I.S. EN 209:2000 STEEL DRUMS - REMOVABLE HEAD (OPEN HEAD) DRUMS WITH A MINIMUM TOTAL CAPACITY OF 210 L
I.S. EN 10131:2006 COLD ROLLED UNCOATED AND ZINC OR ZINC-NICKEL ELECTROLYTICALLY COATED LOW CARBON AND HIGH YIELD STRENGTH STEEL FLAT PRODUCTS FOR COLD FORMING - TOLERANCES ON DIMENSIONS AND SHAPE
I.S. EN 10152:2017 ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
DIN EN 13218:2010-09 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
DIN EN 792-7:2002-12 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS
DIN EN 13611:2019-06 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
DIN EN 10169-3:2003-09 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 3: PRODUCTS FOR BUILDING INTERIOR APPLICATIONS
DIN EN 13218:2002-09 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
DIN EN 10169-1:2004-04 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS)
I.S. EN 845-2:2013 SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
I.S. EN 12050-2:2015 WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 2: LIFTING PLANTS FOR FAECAL-FREE WASTEWATER
I.S. EN 442-1:2014 RADIATORS AND CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
I.S. EN ISO 4263-3:2015 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE AGEING EHAVIOUR OF INHIBITED OILS AND FLUIDS USING THE TOST TEST - PART 3: ANHYDROUS PROCEDURE FOR SYNTHETIC HYDRAULIC FLUIDS (ISO 4263-3:2015)
I.S. EN 12711:2000 STEEL DRUMS - NON-REMOVABLE HEAD (TIGHT HEAD) DRUMS WITH A MINIMUM TOTAL CAPACITY OF 230 L
I.S. EN 10268:2006 COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
NF EN 14276-1 : 2006 + A1 2011 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
I.S. EN 12050-4:2015 WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 4: NON-RETURN VALVES FOR FAECAL-FREE WASTEWATER AND WASTEWATER CONTAINING FAECAL MATTER
I.S. EN 210:2000 STEEL DRUMS - NON-REMOVABLE HEAD (TIGHT HEAD) DRUMS WITH A MINIMUM TOTAL CAPACITY OF 216.5 L
I.S. EN 12050-1:2015 WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 1: LIFTING PLANTS FOR WASTEWATER CONTAINING FAECAL MATTER
UNI EN 792-7 : 2008 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS
12/30234431 DC : 0 BS ISO 9940 - AEROSPACE - FIRE RESISTANT HYDRAULIC FLUIDS
DIN EN ISO 18592:2010-05 RESISTANCE WELDING - DESTRUCTIVE TESTING OF WELDS - METHOD FOR THE FATIGUE TESTING OF MULTI-SPOT-WELDED SPECIMENS
DIN EN 10169:2012-06 Continuously organic coated (coil coated) steel flat products - Technical delivery conditions (includes Amendment A1:2012)
I.S. EN 10169-1:2004 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS)
I.S. EN 50131-2-6:2008 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-6: OPENING CONTACTS (MAGNETIC)
UNI EN 12693 : 2008 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
09/30183551 DC : 0 BS ISO 11148-7 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS
DIN EN 10152:2015-10 (Draft) ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
UNE-EN 10338:2016 Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions
BS EN 124-3:2015 Gully tops and manhole tops for vehicular and pedestrian areas Gully tops and manhole tops made of steel or aluminium alloys
12/30265304 DC : 0 BS EN 124-3 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 3: GULLY TOPS AND MANHOLE TOPS MADE FROM STEEL OR ALUMINIUM ALLOY
04/30125241 DC : DRAFT NOV 2004 EN 15085-4 - RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 4: PRODUCTION REQUIREMENTS
17/30347443 DC : DRAFT JUN 2017 BS EN 12480 - GAS METERS - ROTARY DISPLACEMENT GAS METERS
08/30167676 DC : DRAFT JAN 2008 BS EN 10120 - STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS
13/30278682 DC : 0 BS EN 442-1 - RADIATORS AND CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
17/30358216 DC : DRAFT AUG 2017 BS EN 50131-2-10 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-10: INTRUSION DETECTORS - LOCK STATE CONTACTS (MAGNETIC)
07/30166095 DC : 0 EN 124 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS
BS EN 16028:2012 Railway applications. Wheel/rail friction management. Lubricants for trainborne and trackside applications
UNI EN ISO 9226 : 2012 CORROSION OF METALS AND ALLOYS - CORROSIVITY OF ATMOSPHERES - DETERMINATION OF CORROSION RATE OF STANDARD SPECIMENS FOR THE EVALUATION OF CORROSIVITY
PREN 442-1 : DRAFT 2013 RADIATORS AND CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
ONORM EN 13322-1 : 2006 TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 1: CARBON STEEL
UNE-EN 15773:2010 Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems] - Specifications, recommendations and guidelines
S.R. CLC/TS 50131-2-10:2014 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-10: INTRUSION DETECTORS - LOCK STATE CONTACTS (MAGNETIC)
DIN EN ISO 4263-3:2016-05 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE AGEING BEHAVIOUR OF INHIBITED OILS AND FLUIDS USING THE TOST TEST - PART 3: ANHYDROUS PROCEDURE FOR SYNTHETIC HYDRAULIC FLUIDS (ISO 4263-3:2015)
DIN EN 13736:2009-11 SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES
DIN EN 692:2009-10 Machine tools - Mechanical presses - Safety (includes Amendment A1:2009)
DIN EN 14276-1:2011-05 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
DIN EN 12050-4:2015-05 WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 4: NON-RETURN VALVES FOR FAECAL-FREE WASTEWATER AND WASTEWATER CONTAINING FAECAL MATTER
DIN EN 12050-1:2015-05 WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 1: LIFTING PLANTS FOR WASTEWATER CONTAINING FAECAL MATTER
BS EN ISO 4263-3:2010 Petroleum and related products. Determination of the ageing behaviour of inhibited oils and fluids using the TOST test Anhydrous procedure for synthetic hydraulic fluids
BS EN 10169-3:2003 Continuously organic coated (coil coated) steel flat products Products for building interior applications
EN 14276-1:2020 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
UNE-EN 12050-4:2015 Wastewater lifting plants for buildings and sites - Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter
UNE-EN 12050-2:2015 Wastewater lifting plants for buildings and sites - Part 2: Lifting plants for faecal-free wastewater
DIN EN ISO 7253:2002-04 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG)
UNI EN 14276-1 : 2011 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
EN 61029-2-4:2011 Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements for bench grinders
UNE-EN 693:2001 Machine tools - Safety - Hydraulic presses
UNI EN 16028 : 2012 RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS
UNI EN 10268 : 2013 COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
UNI EN 13736 : 2009 SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES
UNI EN 692 : 2009 MACHINE TOOLS - MECHANICAL PRESSES - SAFETY
UNI EN 1106 : 2010 MANUALLY OPERATED TAPS FOR GAS BURNING APPLIANCES
UNI EN 10131 : 2006 COLD ROLLED UNCOATED AND ZINC OR ZINC-NICHEL ELECTROLYTICALLY COATED LOW CARBON AND HIGH YIELD STRENGTH STEEL FLAT PRODUCTS FOR COLD FORMING - TOLERANCES ON DIMENSIONS AND SHAPE
UNI EN 13218 : 2008 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
UNI EN 1854 : 2010 PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES
UNI EN 693 : 2011 MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES
EN 50144-2-3 : 2002 AMD 2 2003 SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 2-3: PARTICULAR REQUIREMENTS FOR GRINDERS, DISK TYPE SANDERS AND POLISHERS
UNE-EN 16509:2015 Transportable gas cylinders - Non-refillable, small transportable, steel cylinders of capacities up to and including 120 ml containing compressed or liquefied gases (compact cylinders) - Design, construction, filling and testing
DIN EN 16028 E : 2012 RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS
UNI EN ISO 18592 : 2010 RESISTANCE WELDING - DESTRUCTIVE TESTING OF WELDS - METHOD FOR THE FATIGUE TESTING OF MULTI-SPOT-WELDED SPECIMENS
BS ISO 9940:2015 Aerospace series. Fluid, hydraulic, phosphate ester-base, fire resistant. Technical specification
12/30258894 DC : 0 BS ISO 3574 - COLD-REDUCED CARBON STEEL SHEET OF COMMERCIAL AND DRAWING QUALITIES
02/713774 DC : DRAFT DEC 2002 EN 10336 - CONTINUOUSLY HOT-DIP COATED AND ELECTROLYTICALLY COATED STRIP AND SHEET OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
BS EN 50216-9:2009 Power transformer and reactor fittings Oil-to-water heat exchangers
I.S. EN 692:2005 MACHINE TOOLS - MECHANICAL PRESSES - SAFETY
12/30257022 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS
13/30290460 DC : 0 BS ISO 9940 - AEROSPACE SERIES - FLUID, HYDRAULIC, PHOSPHATE ESTER-BASE, FIRE RESISTANT - TECHNICAL SPECIFICATION
14/30302298 DC : 0 BS ISO 9940 - AEROSPACE SERIES - FLUID, HYDRAULIC, PHOSPHATE ESTER-BASE, FIRE RESISTANT - TECHNICAL SPECIFICATION
DIN EN ISO 11148-7:2013-01 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS (ISO 11148-7:2012)
BS EN 50131-2-6:2008 Alarm systems. Intrusion and hold-up systems Opening contacts (magnetic)
07/30154728 DC : DRAFT DEC 2007 BS EN ISO 18592 - RESISTANCE WELDING - DESTRUCTIVE TEST OF WELDS - METHOD FOR THE FATIGUE TESTING OF MULTI-SPOT-WELDED SPECIMENS
BS EN ISO 11148-7:2012 Hand-held non-electric power tools. Safety requirements Grinders
02/713544 DC : DRAFT NOV 2002 EN 10268 - COLD ROLLED FLAT PRODUCTS WITH HIGHER YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
UNI EN 16509 : 2014 TRANSPORTABLE GAS CYLINDERS - NON-REFILLABLE, SMALL TRANSPORTABLE, STEEL CYLINDERS OF CAPACITIES UP TO AND INCLUDING 120 ML CONTAINING COMPRESSED OR LIQUEFIED GASES (COMPACT CYLINDERS) - DESIGN, CONSTRUCTION, FILLING AND TESTING
04/30123986 DC : DRAFT OCT 2004 EN 50216-9 - POWER TRANSFORMER AND REACTOR FITTINGS - PART 9: OIL TO WATER HEAT EXCHANGER
04/30109196 DC : DRAFT FEB 2004 EN 14879 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 1: TERMINOLOGY, DESIGN AND PREPARATION OF SUBSTRATE
BS 1449-1.1:1991 Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip General specification
I.S. EN 10338:2015 HOT ROLLED AND COLD ROLLED NON-COATED PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
FD L00 025 : 2002 FD AEROSPACE INDUSTRY - NORMES AIR - REPLACEMENT
PREN 845-2 : DRAFT 2012 SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
PREN 12050-1 : DRAFT 2012 WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 1: LIFTING PLANTS FOR WASTEWATER CONTAINING FAECAL MATTER
DIN EN 13611:2016-09 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
PREN 13611 : DRAFT 2017 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
PREN 10268 : DRAFT 2002 COLD ROLLED FLAT PRODUCTS WITH HIGHER YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
DIN EN 12693:2016-10 (Draft) REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
I.S. EN 12693:2008 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
EN 12480:2018 Gas meters - Rotary displacement gas meters
I.S. EN 12480:2018 GAS METERS - ROTARY DISPLACEMENT GAS METERS
I.S. EN 50144-2-3:2002 SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 2-3: PARTICULAR REQUIREMENTS FOR GRINDERS, DISK TYPE SANDERS AND POLISHERS
DIN EN 13831:2007-12 Closed expansion vessels with built in diaphragm for installation in water
DIN EN 10268:2013-12 COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
DIN EN 12050-2:2015-05 WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 2: LIFTING PLANTS FOR FAECAL-FREE WASTEWATER
DIN EN 442-1:2015-03 RADIATORS AND CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
BS EN 12050-1:2015 Wastewater lifting plants for buildings and sites Lifting plants for wastewater containing faecal matter
BS EN 12711:2000 Steel drums. Non-removable head (tight head) drums with a minimum total capacity of 230 l
BS EN 12284:2003 Refrigerating systems and heat pumps. Valves. Requirements, testing and marking
UNE-EN 16028:2013 Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications
BS EN 442-1:2014 Radiators and convectors Technical specifications and requirements
BS EN 10271:1999 Electrolytically zinc-nickel (ZN) coated steel flat products. Technical delivery conditions
BS EN 13025-2:2005 Packaging. Light gauge metal containers Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml
BS EN 14879-1:2005 0rganic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Terminology, design and preparation of substrate
BS EN 13736 : 2003 SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES
BS EN 12050-4:2015 Wastewater lifting plants for buildings and sites Non-return valves for faecal-free wastewater and wastewater containing faecal matter
BS EN 10131:2006 Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming. Tolerances on dimensions and shape
BS EN 13008:2000 Steel drums. Removable head (open head) drums with a nominal capacity of 15 l to 62 l
UNE-EN 10152:2017 Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions
ISO 4263-3:2015 Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids using the TOST test Part 3: Anhydrous procedure for synthetic hydraulic fluids
BS EN 693 : 2001 MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES
BS EN 13025-3:2005 Packaging. Light gauge metal containers Removable head (open head) round steel and tinplate containers with a no minal capacity of 20000 ml, 25000 ml and 30000 ml
EN 14276-1:2006+A1:2011 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
BS EN 14276-1 : 2006 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
BS EN 210:2000 Steel drums. Non-removable head (tight head) drums with a minimum total capacity of 216,5 l
ISO 11148-7:2012 Hand-held non-electric power tools — Safety requirements — Part 7: Grinders
BS EN 13831:2007 Closed expansion vessels with built-in diaphragm for installation in water
UNE-EN 12050-1:2015 Wastewater lifting plants for buildings and sites - Part 1: Lifting plants for wastewater containing faecal matter
ISO 18592:2009 Resistance welding Destructive testing of welds Method for the fatigue testing of multi-spot-welded specimens
UNE-EN 10268:2007 Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions
ISO 9226:2012 Corrosion of metals and alloys — Corrosivity of atmospheres — Determination of corrosion rate of standard specimens for the evaluation of corrosivity
UNE-EN 10169:2011 Continuously organic coated (coil coated) steel flat products - Technical delivery conditions
UNE-EN 61029-2-4:2011 Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements for bench grinders
CLC/TS 50131-2-10:2014 Alarm systems - Intrusion and hold-up systems - Part 2-10: Intrusion detectors - Lock state contacts (magnetic)
EN 210 : 1999 STEEL DRUMS - NON-REMOVABLE HEAD (TIGHT HEAD) DRUMS WITH A MINIMUM TOTAL CAPACITY OF 216,5 L
EN 692:2005+A1:2009 Machine tools - Mechanical presses - Safety
EN 845-2:2013+A1:2016 SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
EN 792-7:2001+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 7: Grinders
EN ISO 18592:2009 Resistance welding - Destructive testing of welds - Method for the fatigue testing of multi-spot-welded specimens (ISO 18592:2009)
EN ISO 11148-7:2012 Hand-held non-electric power tools - Safety requirements - Part 7: Grinders (ISO 11148-7:2012)
EN 16028:2012 Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications
EN 16509:2014 Transportable gas cylinders - Non-refillable, small transportable, steel cylinders of capacities up to and including 120 ml containing compressed or liquefied gases (compact cylinders) - Design, construction, filling and testing
EN 209 : 1999 STEEL DRUMS - REMOVABLE HEAD (OPEN HEAD) DRUMS WITH A MINIMUM TOTAL CAPACITY OF 210 L
EN 13218:2002+A1:2008/AC:2010 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
EN 693 : 2001 COR 2011 MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES
EN 13831:2007 Closed expansion vessels with built in diaphragm for installation in water
EN ISO 4263-3:2015 Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids using the TOST test - Part 3: Anhydrous procedure for synthetic hydraulic fluids (ISO 4263-3:2015)
EN 442-1:2014 Radiators and convectors - Part 1: Technical specifications and requirements
EN 14879-1:2005 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate
EN 13736:2003+A1:2009 Safety of machine tools - Pneumatic presses
I.S. EN 13025-2:2005 PACKAGING - LIGHT GAUGE METAL CONTAINERS - PART 2: NON-REMOVABLE HEAD (TIGHT HEAD) ROUND STEEL AND TINPLATE CONTAINERS WITH A NOMINAL CAPACITY OF 20 000 ML, 25 000 ML AND 30 000 ML
DIN EN ISO 9226:2012-05 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity (ISO 9226:2012)
BS EN 50144-2-3:2002 Safety of hand-held electric motor operated tools Particular requirements for grinders, disk type sanders and polishers
I.S. EN 10169-3:2003 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 3: PRODUCTS FOR BUILDING INTERIOR APPLICATIONS
PREN 15773 : DRAFT 2016 INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED OR SHERARDIZED STEEL ARTICLES [DUPLEX SYSTEMS] - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES
I.S. EN 792-7:2002 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS
PD CR 10313:2000 Classification of grades of steel. Examples of classification related to European standards
08/30188146 DC : 0 BS EN 10169 - CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS
17/30351224 DC : 0 BS EN 14276-1 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
04/30055611 DC : 0 BS EN 124 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS
00/705406 DC : 0 PREN 13831 - CLOSED EXPANSION VESSELS WITH BUILT IN DIAPHRAGM FOR INSTALLATION IN WATER SYSTEMS
UNE-EN 124-3:2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 3: Gully tops and manhole tops made of steel or aluminium alloys
DIN EN 16509 E : 2014 TRANSPORTABLE GAS CYLINDERS - NON-REFILLABLE, SMALL TRANSPORTABLE, STEEL CYLINDERS OF CAPACITIES UP TO AND INCLUDING 120 ML CONTAINING COMPRESSED OR LIQUEFIED GASES (COMPACT CYLINDERS) - DESIGN, CONSTRUCTION, FILLING AND TESTING
07/30164617 DC : 0 BS EN 10152 - ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
15/30327671 DC : 0 BS EN 10152 - ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
02/713103 DC : DRAFT NOV 2002 PREN 10169-1 - CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS)
BS EN 61029-2-4:2011 Safety of transportable motor-operated electric tools Particular requirements for bench grinders
BS EN 10169 : 2010 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS
PREN 14276-1 : DRAFT 2017 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
UNE-EN ISO 18592:2010 Resistance welding - Destructive testing of welds - Method for the fatigue testing of multi-spot-welded specimens (ISO 18592:2009)
I.S. EN ISO 11148-7:2012 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS (ISO 11148-7:2012)
ISO 4148:2004 Road vehicles Special warning lamps Dimensions
I.S. EN 124-3:2015 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 3: GULLY TOPS AND MANHOLE TOPS MADE OF STEEL OR ALUMINIUM ALLOYS
UNI EN 10169 : 2012 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS
UNE-EN 13611:2016 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
UNE-EN 50216-10:2010 Power transformer and reactor fittings - Part 10: Oil-to-air heat exchangers
PREN 10338 : DRAFT 2013 HOT ROLLED AND COLD ROLLED NON-COATED FLAT PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
CEI EN 50216-10 : 2010 POWER TRANSFORMER AND REACTOR FITTINGS - PART 10: OIL-TO-AIR HEAT EXCHANGERS
EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
I.S. EN ISO 18592:2009 RESISTANCE WELDING - DESTRUCTIVE TESTING OF WELDS - METHOD FOR THE FATIGUE TESTING OF MULTI-SPOT-WELDED SPECIMENS
IEC 62642-2-6:2010 Alarm systems - Intrusion and hold-up systems - Part 2-6: Intrusion detectors - Opening contacts (magnetic)
S.R. CR 10313:2000 CLASSIFICATION OF GRADES OF STEEL - EXAMPLES OF CLASSIFICATION RELATED TO EUROPEAN STANDARDS
DIN EN 13025-1:2006-01 Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40000 ml
DIN EN 13025-2:2006-01 Packaging - Light gauge metal containers - Part 2: Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml
UNE-EN ISO 4263-3:2016 Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids using the TOST test - Part 3: Anhydrous procedure for synthetic hydraulic fluids (ISO 4263-3:2015)
BS EN 692 : 2005 MACHINE TOOLS - MECHANICAL PRESSES - SAFETY
BS EN 209:2000 Steel drums. Removable head (open head) drums with a minimum total capacity of 210 l
BS EN 10268 : 2006 COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
BS EN 13007:2000 Steel drums. Non-removable head (tight head) drums with a nominal capacity of 20 l to 60 l
BS EN 12205:2001 Transportable gas cylinders. Non-refillable metallic gas cylinders
BS EN 792-7 : 2001 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS
BS EN 13025-1:2005 Packaging. Light gauge metal containers Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40000 ml
BS EN 10152:2017 Electrolytically zinc coated cold rolled steel flat products for cold forming. Technical delivery conditions
DIN EN 12693:2008-09 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
EN 13025-2:2005 (edition 2) Packaging - Light gauge metal containers - Part 2: Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20 000 ml, 25 000 ml and 30 000 ml
EN 13007:1999 Steel drums - Non-removable head (tight head) drums with a nominal capacity of 20 l to 60 l
EN 12284 : 2003 REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING
I.S. EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
EN 10338:2015 Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions
CR 10313:2000 Classification of grades of steel - Examples of classification related to European Standards
EN 10169-1:2003 Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods)
EN 50131-2-6:2008 Alarm systems - Intrusion and hold-up systems - Part 2-6: Opening contacts (magnetic)
EN 13025-1:2005 (edition 2) Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40 000 ml
EN 50216-10:2009 Power transformer and reactor fittings - Part 10: Oil-to-air heat exchangers
EN 50216-9:2009 Power transformer and reactor fittings - Part 9: Oil-to-water heat exchangers
DIN EN 10162:2003-12 Cold-rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances; German version EN 10162:2003
UNE-EN 14276-1:2007 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements

EN ISO 14284:2002 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)
ISO 10275:2007 Metallic materials Sheet and strip Determination of tensile strain hardening exponent
EN 10002-1 : 2001 METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE
EN 10079:2007 Definition of steel products
EN 10027-2:2015 DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
EN ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
EN 10131:2006 (edition 2) Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape
EN 10021:2006 General technical delivery conditions for steel products
EN 10204:2004 Metallic products - Types of inspection documents
EN 10049:2013 Measurement of roughness average Ra and peak count RPc on metallic flat products
EN 10027-1:2016 Designation systems for steels - Part 1: Steel names
ISO 10113:2006 Metallic materials Sheet and strip Determination of plastic strain ratio
EN 10020:2000 Definition and classification of grades of steel
EN 606:2004 BAR CODING - TRANSPORT AND HANDLING LABELS FOR STEEL PRODUCTS
ISO 377:2017 Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
ISO 14284:1996 Steel and iron — Sampling and preparation of samples for the determination of chemical composition

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.