EN 10216-1:2013
Current
Current
The latest, up-to-date edition.
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
Published date
11-12-2013
Publisher
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Classification and designation
6 Information to be supplied by the purchaser
7 Manufacturing process
8 Requirements
9 Inspection
10 Sampling
11 Verification test methods
12 Marking
13 Protection
Annex A (informative) - Technical changes from
the previous edition
Annex ZA (informative) - Relationship between
this European Standard and the Essential
Requirements of EU Directive 97/23/EC
Bibliography
This European Standard specifies the technical delivery conditions for two qualities TR1 and TR2 of seamless tubes of circular cross section with specified room temperature properties made of non-alloy quality steel.NOTEOnce this standard is published in the Official Journal of the European Union (OJEU) under Directive 97/23/EC, presumption of conformity to the Essential Safety Requirements (ESR) of Directive 97/23/EC is limited to technical data of materials in this standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of the Pressure Equipment Directive are satisfied, needs to be done by the designer or manufacturer of the pressure equipment, taking also into account the subsequent manufacturing processes which may affect properties of the base materials.
| Committee |
CEN/TC 459/SC 10
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| BS EN 10216-1:2013 | Identical |
| DIN EN 10216-1:2014-03 | Identical |
| NEN EN 10216-1 : 2013 | Identical |
| I.S. EN 10216-1:2013 | Identical |
| UNI EN 10216-1 : 2014 | Identical |
| NS EN 10216-1 : 2013 | Identical |
| SN EN 10216-1:2014 | Identical |
| NF EN 10216-1 : 2014 | Identical |
| NBN EN 10216-1 : 2014 | Identical |
| PN EN 10216-1 : 2014 | Identical |
| UNE-EN 10216-1:2014 | Identical |
| 12/30255878 DC : 0 | BS ISO 17885 - PLASTICS PIPING SYSTEMS - MECHANICAL FITTINGS FOR PRESSURE PIPING SYSTEMS - SPECIFICATIONS |
| 05/30132854 DC : DRAFT APR 2005 | EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| 10/30234613 DC : DRAFT NOV 2010 | BS EN 14420-4 - HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
| 17/30360051 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| I.S. EN 13445-2:2014 | UNFIRED PRESSURE VESSELS - PART 2: MATERIALS |
| BS EN 14917 : 2009 | METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
| S.R. CWA 16519:2012 | DESIGN AND CONSTRUCTION CODE FOR MECHANICAL EQUIPMENTS OF INNOVATIVE NUCLEAR INSTALLATIONS |
| EN 14917:2009+A1:2012 | Metal bellows expansion joints for pressure applications |
| PD CEN/TR 14585-3:2017 | Corrugated metal hose assemblies for pressure applications Design method |
| I.S. EN 13445-4:2014 | UNFIRED PRESSURE VESSELS - PART 4: FABRICATION |
| EN 676:2003+A2:2008/AC:2008 | AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| BS EN 13480-2:2017 | Metallic industrial piping Materials |
| DIN EN 12007-3:2015-07 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 3: SPECIFIC FUNTIONAL REQUIREMENTS FOR STEEL |
| BS EN 303-5:2012 | Heating boilers Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW. Terminology, requirements, testing and marking |
| BS EN 14015:2004 | Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above |
| I.S. EN 14424:2013 | HOSE FITTINGS WITH SCREWED FERRULES |
| DIN EN 12952-14:2004-09 | Water-tube boilers and auxiliary installations - Part 14: Requirements for fluegas DENOX systems using liquified pressurized ammonia and ammonia water solution |
| EN 12952-14:2004 | Water-tube boilers and auxiliary installations - Part 14: Requirements for flue gas DENOX-systems using liquified pressurized ammonia and ammonia water solution |
| EN 10079:2007 | Definition of steel products |
| EN 12953-2:2012 | Shell boilers - Part 2: Materials for pressure parts of boilers and accessories |
| ONORM EN 15001-1 : 2011 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| DIN EN 14917:2012-06 | Metal bellows expansion joints for pressure applications (includes Amendment A1:2012) |
| 10/30216705 DC : 0 | BS EN 12953-2 - SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| DIN EN 15001-1:2011-02 | Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| I.S. EN 16125:2015 | LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG IN LIQUID PHASE AND VAPOUR PRESSURE PHASE |
| BS EN 13611:2015 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements |
| EN 13445-4 : 2014 COR 2017 | UNFIRED PRESSURE VESSELS - PART 4: FABRICATION |
| DIN EN 12252:2014-07 | LPG equipment and accessories - Equipping of LPG road tankers |
| DIN EN 303-5:2012-10 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
| DIN EN 14422:2013-09 | CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES |
| DIN EN 14424:2013-09 | HOSE FITTINGS WITH SCREWED FERRULES |
| DIN EN 10297-1:2003-06 | SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY AND ALLOY STEEL TUBES |
| ISO 17885:2015 | Plastics piping systems Mechanical fittings for pressure piping systems Specifications |
| BS EN 746-2:2010 | Industrial thermoprocessing equipment Safety requirements for combustion and fuel handling systems |
| I.S. EN 746-2:2010 | INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS |
| DIN EN 13611:2019-06 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| I.S. EN 12953-2:2012 | SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| I.S. EN 14422:2013 | CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES |
| DIN EN 12252:2000-10 | LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
| I.S. EN 303-5:2012 | HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING |
| I.S. EN 12252:2014 | LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
| I.S. EN 14394:2006 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
| DIN EN 14420-4:2013-09 | Hose fittings with clamp units - Part 4: Flange connections |
| I.S. EN 14420-4:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
| I.S. EN 10079:2007 | DEFINITION OF STEEL PRODUCTS |
| I.S. EN 12007-3:2015 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 3: SPECIFIC FUNCTIONAL REQUIREMENTS FOR STEEL |
| KTA 3507 : 2014(R2017) | FACTORY TESTS, POST-REPAIR TESTS AND CERTIFICATION OF SATISFACTORY PERFORMANCE IN SERVICE OF MODULES AND DEVICES FOR THE INSTRUMENTATION AND CONTROLS OF THE SAFETY SYSTEM |
| KTA 3407 : 2014 | PIPE PENETRATIONS THROUGH THE REACTOR CONTAINMENT VESSEL |
| KTA 3702 : 2014(R2017) | EMERGENCY POWER GENERATING FACILITIES WITH DIESEL-GENERATOR UNITS IN NUCLEAR POWER PLANTS |
| I.S. EN 15001-1:2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| CEN ISO/TR 20172:2009 | Welding - Grouping systems for materials - European materials (ISO/TR 20172:2009) |
| 08/30184300 DC : DRAFT SEP 2008 | BS EN 12952-2 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| 12/30257298 DC : 0 | BS EN 676 - FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| UNI EN 303-5 : 2012 | HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING |
| NF EN 15001-1 : 2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| 04/30118252 DC : DRAFT AUG 2004 | EN 14917 - METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
| PD CEN ISO/TR 20172:2009 | Welding. Grouping systems for materials. European materials |
| DIN EN 14917 E : 2012 | METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
| PREN 14420-4 : DRAFT 2010 | HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
| S.R. CEN ISO TR 20172:2009 | WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS |
| EN 13445-2:2014/A2:2018 | UNFIRED PRESSURE VESSELS - PART 2: MATERIALS |
| UNI EN 1092-1 : 2013 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| DIN EN 1092-1:2016-05 (Draft) | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| BS EN 16125:2015 | LPG Equipment and Accessories. Pipework systems and supports. LPG in liquid phase and vapour pressure phase |
| I.S. EN 1092-1:2007 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES,FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| I.S. EN 14917:2009 | METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
| DIN EN 746-2:2011-02 | Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems |
| DIN EN 676:2012-03 (Draft) | AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| DIN EN 14424 E : 2013 | HOSE FITTINGS WITH SCREWED FERRULES |
| DIN EN 14394 E : 2008 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
| DIN EN 14394:2008-12 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
| DIN EN 14422 E : 2013 | CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES |
| BS EN 12252:2014 | LPG equipment and accessories. Equipping of LPG road tankers |
| DIN EN 676:2008-11 | Automatic forced draught burners for gaseous fuels (includes Amendment A2:2008) |
| ONORM EN 676 : 2008 | AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| UNE-EN 16125:2016 | LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
| UNE-EN 13445-4:2015 | Unfired pressure vessels - Part 4: Fabrication |
| UNI EN 10079 : 2007 | DEFINITION OF STEEL PRODUCTS |
| UNI EN 14394 : 2008 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREES C |
| UNI EN 14424 : 2013 | HOSE FITTINGS WITH SCREWED FERRULES |
| UNI EN 15001-1 : 2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| UNI EN 12953-2 : 2012 | SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| UNI EN 746-2 : 2011 | INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS |
| UNI EN 14422 : 2013 | CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES |
| UNI EN 12252 : 2014 | LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
| UNI EN 14420-4 : 2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
| UNI EN 676 : 2008 | AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| EN 303-5:2012 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
| DIN 28140-1:2005-01 | Connections for bottom discharge valves - Part 1: Non alloyed, stainless or lined steel; dimensions mating PN 10 |
| 16/30336440 DC : DRAFT MAR 2016 | BS EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| 13/30281067 DC : 0 | BS EN 12252 - LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
| PREN 676 : DRAFT 2012 | FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| 13/30276940 DC : 0 | BS EN 16125 - LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE |
| UNI EN 14917 : 2012 | METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
| 03/118134 DC : DRAFT NOV 2003 | EN 12252 - EQUIPPING OF LIQUEFIED PETROLEUM GAS (LPG) ROAD TANKERS |
| BS ISO 17885:2015 | Plastics piping systems. Mechanical fittings for pressure piping systems. Specifications |
| PREN 16510-1 : DRAFT 2013 | RESIDENTIAL SOLID FUEL BURNING APPLIANCES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| EN 1092-1:2018 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges |
| 13/30271701 DC : 0 | BS EN 16510-1 - RESIDENTIAL SOLID FUEL BURNING APPLIANCES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| I.S. EN 13611:2015 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| BS EN 13480-2:2017+A3:2018 | Metallic industrial piping Materials |
| DIN EN 12952-14 E : 2004 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 14: REQUIREMENTS FOR FLUE GAS DENOX-SYSTEMS USING LIQUEFIED PRESSURIZED AMMONIA AND AMMONIA WATER SOLUTION |
| DIN EN 14015:2005-02 | Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above |
| BS EN 14394 : 2005 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
| BS EN 14620-2:2006 | Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0°C and -165°C Metallic components |
| UNE-EN 15001-1:2010 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| UNE-EN 12953-2:2013 | Shell boilers - Part 2: Materials for pressure parts of boilers and accessories |
| BS EN 12952-14:2004 | Water-tube boilers and auxiliary installations Requirements for flue gas DENOX-systems using liquified pressurized ammonia and ammonia water solution |
| BS EN 10079:2007 | Definition of steel products |
| EN 13480-2:2017 | Metallic industrial piping - Part 2: Materials |
| BS EN 676 : 2003 | AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| BS EN 14422:2013 | Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses |
| BS EN 12007-3:2000 | Gas supply systems. Pipelines for maximum operating pressure up to and including 16 bar Specific functional recommendations for steel |
| UNE-EN 14422:2014 | Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses |
| BS EN 14424:2013 | Hose fittings with screwed ferrules |
| BS EN 14420-4:2013 | Hose fittings with clamp units Flange connections |
| UNE-EN 12007-3:2015 | Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel |
| UNE-EN 14424:2014 | Hose fittings with screwed ferrules |
| EN 14422:2013 | Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses |
| EN 14394:2005+A1:2008 | Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C |
| EN 15001-1:2009 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| EN 746-2:2010 | Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems |
| EN 16125:2015 | LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
| EN 14015:2004 | Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above |
| EN 14420-4:2013 | Hose fittings with clamp units - Part 4: Flange connections |
| EN 14620-2:2006 | Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 2: Metallic components |
| EN 14424:2013 | Hose fittings with screwed ferrules |
| EN 286-1:1998/A2:2005 | SIMPLE UNFIRED PRESSURE VESSELS DESIGNED TO CONTAIN AIR OR NITROGEN - PART 1: PRESSURE VESSELS FOR GENERAL PURPOSES |
| DIN EN 16125:2016-03 | LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE |
| PREN 12252 : DRAFT 2013 | LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
| CEN/TR 14585-3:2017 | Corrugated metal hose assemblies for pressure applications - Part 3: Design method |
| 12/30257022 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS |
| S.R. CEN ISO/TR 20172:2021 | Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021) |
| BS EN 15001-1:2009 | Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing |
| 06/19977015 DC : DRAFT JULY 2006 | BS EN 10344 - MALLEABLE CAST IRON FITTINGS WITH COMPRESSION ENDS FOR STEEL PIPES |
| KTA 3205.2 : 2015 COR 2016 | COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS - PART 2: COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS FOR PRESSURE AND ACTIVITY-RETAINING COMPONENTS IN SYSTEMS OUTSIDE THE PRIMARY CIRCUIT |
| I.S. CEN ISO TR 20172:2006 | WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS |
| BS EN 13445-2 : 2014 | UNFIRED PRESSURE VESSELS - PART 2: MATERIALS |
| UNE-EN 13445-2:2015 | Unfired pressure vessels - Part 2: Materials |
| DIN EN 13611:2016-09 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| UNE-EN 13611:2016 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| PREN 13611 : DRAFT 2017 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| UNE-EN 14917:2011 | Metal bellows expansion joints for pressure applications |
| EN 13611:2015/AC:2016 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| I.S. EN 676:2003 | AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| DIN EN 12953-2:2012-05 | Shell boilers - Part 2: Materials for pressure parts of boilers and accessories |
| BS EN 13445-4 : 2014 | UNFIRED PRESSURE VESSELS - PART 4: FABRICATION |
| BS EN 12953-2:2012 | Shell boilers Materials for pressure parts of boilers and accessories |
| BS EN 286-1 : 1998 | SIMPLE UNFIRED PRESSURE VESSELS DESIGNED TO CONTAIN AIR OR NITROGEN - PART 1: PRESSURE VESSELS FOR GENERAL PURPOSES |
| UNE-EN 303-5:2013 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
| ISO/TR 20172:2009 | Welding Grouping systems for materials European materials |
| EN 12007-3:2015 | Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel |
| EN 12252:2014 | LPG equipment and accessories - Equipping of LPG road tankers |
| DIN EN 10079:2007-06 | Definition of steel products |
| I.S. EN 13611:2015/AC:2016 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| UNE-EN 13480-2:2017 | Metallic industrial piping - Part 2: Materials (Endorsed by Asociación Española de Normalización in September of 2019.) |
| UNE-EN 16125:2020 | LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
| EN ISO 14284:2002 | Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996) |
| EN 10052:1993 | Vocabulary of heat treatment terms for ferrous products |
| ISO 10893-3:2011 | Non-destructive testing of steel tubes Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections |
| EN 10027-2:2015 | DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM |
| CEN/TR 10261:2013 | Iron and steel - European standards for the determination of chemical composition |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
| EN ISO 10893-10:2011 | Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-10:2011) |
| ISO 10893-1:2011 | Non-destructive testing of steel tubes Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness |
| EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| EN ISO 10893-3:2011 | Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-3:2011) |
| EN ISO 10893-1:2011 | Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness (ISO 10893-1:2011) |
| EN 10168:2004 | Steel products - Inspection documents - List of information and description |
| EN ISO 2566-1:1999 | Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984) |
| EN ISO 9712:2012 | Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012) |
| ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
| EN 10021:2006 | General technical delivery conditions for steel products |
| EN ISO 10893-2:2011 | Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO 10893-2:2011) |
| ISO 2566-1:1984 | Steel Conversion of elongation values Part 1: Carbon and low alloy steels |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 11484:2009 | Steel products — Employer's qualification system for non-destructive testing (NDT) personnel |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 10020:2000 | Definition and classification of grades of steel |
| ISO 10893-2:2011 | Non-destructive testing of steel tubes Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections |
| EN ISO 148-1:2016 | Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
| EN 10266:2003 | Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards |
| EN 10220:2002 | Seamless and welded steel tubes - Dimensions and masses per unit length |
| ISO 10893-10:2011 | Non-destructive testing of steel tubes Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.