EN 10217-2:2002/A1:2005
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
23-02-2022
12-01-2013
Foreword
1 SCOPE
2 NORMATIVE REFERENCES
3 TERMS AND DEFINITIONS
4 SYMBOLS
5 CLASSIFICATION AND DESIGNATION
5.1 Classification
5.2 Designation
6 INFORMATION TO BE SUPPLIED BY THE PURCHASER
6.1 Mandatory information
6.2 Options
7 MANUFACTURING PROCESS
7.1 Steelmaking process
7.2 Deoxidation process
7.3 Tube manufacture and delivery conditions
8 REQUIREMENTS
8.1 General
8.2 Chemical composition
8.3 Mechanical properties
8.4 Appearance and internal soundness
8.5 Straightness
8.6 Preparation of ends
8.7 Dimensions, masses and tolerances
9 INSPECTION
9.1 Types of inspection
9.2 Inspection documents
9.2.1 Types of inspection documents
9.2.2 Content of inspection documents
9.3 Summary of inspection and testing
10 SAMPLING
10.1 Frequency of tests
10.2 Preparation of samples and test pieces
11 TEST METHODS
11.1 Chemical analysis
11.2 Tensile test on base material
11.3 Transverse tensile test on the weld
11.4 Flattening test
11.5 Ring tensile test
11.6 Drift expanding test
11.7 Ring expanding test
11.8 Impact test
11.9 Leak tightness test
11.10 Dimensional inspection
11.11 Visual examination
11.12 Non-Destructive Testing
11.13 Material identification
11.14 Retests, sorting and reprocessing
12 MARKING
12.1 Marking to be applied
12.2 Additional marking
13 PROTECTION
Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements of
97/23/EC
Bibliography
Defines the technical delivery conditions in two test categories of electric welded tubes of circular cross section, with specified elevated temperature properties, made of non-alloy and alloy steel.
Committee |
ECISS/TC 29
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
UNE-EN 10217-2:2003/A1:2005 | Identical |
NF EN 10217-2 : 2002 AMD 1 2005 | Identical |
UNE-EN 10217-2:2003 | Identical |
NEN EN 10217-2 : 2002 AMD 1 2005 | Identical |
BS EN 10217-2 : 2002 | Identical |
NEN EN 10217-2:2019 | Identical |
I.S. EN 10217-2:2002 | Identical |
DIN EN 10217-2:2005-04 | Identical |
NBN EN 10217-2 : 2002 AMD 1 2005 | Identical |
NS EN 10217-2 : 2002 AMD 1 2005 | Identical |
PN EN 10217-2 : 2004 AMD 1 2006 | Identical |
SN EN 10217-2 : 2002 AMD 1 2005 | Identical |
ONORM EN 10217-2 : 2007 | Identical |
UNI EN 10217-2 : 2005 | Identical |
NBN EN 1594 : 2013 | Identical |
NBN EN 286-1 : 1998 AMD 2 2006 | Identical |
BS EN 16617:2015 | Pipework. Corrugated metal hose assemblies for combustible gas. Performance requirements, testing and marking |
16/30342037 DC : 0 | BS EN 13941-1 - DISTRICT HEATING PIPES - DESIGN AND INSTALLATION OF THERMAL INSULATED BONDED SINGLE AND TWIN PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PART 1: DESIGN |
BS EN 14917 : 2009 | METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
EN 14917:2009+A1:2012 | Metal bellows expansion joints for pressure applications |
I.S. EN 13480-2:2017 | METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS |
I.S. EN 13445-4:2014 | UNFIRED PRESSURE VESSELS - PART 4: FABRICATION |
I.S. EN 253:2009 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PIPE ASSEMBLY OF STEEL SERVICE PIPE, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
I.S. EN 448:2015 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
BS EN 13480-2:2017 | Metallic industrial piping Materials |
DIN EN 12007-3:2015-07 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 3: SPECIFIC FUNTIONAL REQUIREMENTS FOR STEEL |
DIN EN 14879-1 E : 2005 | ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 1: TERMINOLOGY, DESIGN AND PREPARATION OF SUBSTRATE |
DIN EN 14879-1:2005-12 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate |
BS EN 14015:2004 | Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above |
DIN EN 13941:2003-10 | DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DIRECT HEATING |
EN 12952-2:2011 | Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
EN 10079:2007 | Definition of steel products |
EN 12953-2:2012 | Shell boilers - Part 2: Materials for pressure parts of boilers and accessories |
14/30294476 DC : 0 | BS EN 448 - DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
DIN EN 14917:2012-06 | Metal bellows expansion joints for pressure applications (includes Amendment A1:2012) |
DIN EN 10253-2:2008-09 | Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
10/30216705 DC : 0 | BS EN 12953-2 - SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
PREN 12953-4 : DRAFT 2017 | SHELL BOILERS - PART 4: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
DIN EN 16617:2015-07 | PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING |
17/30348961 DC : 0 | BS EN 12953-4 - SHELL BOILERS - PART 4: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
I.S. EN 13445-2:2014 | UNFIRED PRESSURE VESSELS - PART 2: MATERIALS |
I.S. EN 16125:2015 | LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG IN LIQUID PHASE AND VAPOUR PRESSURE PHASE |
I.S. EN 16617:2015 | PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING |
PREN 448 : DRAFT 2018 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
EN 10253-2:2007 | Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
EN 13445-4 : 2014 COR 2017 | UNFIRED PRESSURE VESSELS - PART 4: FABRICATION |
I.S. EN 10253-2:2007 | BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
BS EN 253 : 2009 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PIPE ASSEMBLY OF STEEL SERVICE PIPE, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
I.S. EN 12953-2:2012 | SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
I.S. EN 12952-2:2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
I.S. EN 13941:2009 | DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
I.S. EN 14394:2006 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
I.S. EN 10079:2007 | DEFINITION OF STEEL PRODUCTS |
I.S. EN 12007-3:2015 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 3: SPECIFIC FUNCTIONAL REQUIREMENTS FOR STEEL |
KTA 3507 : 2014(R2017) | FACTORY TESTS, POST-REPAIR TESTS AND CERTIFICATION OF SATISFACTORY PERFORMANCE IN SERVICE OF MODULES AND DEVICES FOR THE INSTRUMENTATION AND CONTROLS OF THE SAFETY SYSTEM |
KTA 3407 : 2014 | PIPE PENETRATIONS THROUGH THE REACTOR CONTAINMENT VESSEL |
KTA 3702 : 2014(R2017) | EMERGENCY POWER GENERATING FACILITIES WITH DIESEL-GENERATOR UNITS IN NUCLEAR POWER PLANTS |
NF EN 12952-2 : 2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
CEN ISO/TR 20172:2009 | Welding - Grouping systems for materials - European materials (ISO/TR 20172:2009) |
08/30184300 DC : DRAFT SEP 2008 | BS EN 12952-2 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
07/30168488 DC : 0 | BS EN 253 - DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PIPE ASSEMBLY OF STEEL SERVICE PIPE, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
04/30118252 DC : DRAFT AUG 2004 | EN 14917 - METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
PREN 13941 : DRAFT 2009 | DESIGN AND INSTALLATION OF REINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
PD CEN ISO/TR 20172:2009 | Welding. Grouping systems for materials. European materials |
DIN EN 14917 E : 2012 | METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
I.S. EN 12953-4:2002 | SHELL BOILERS - PART 4: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
S.R. CEN ISO TR 20172:2009 | WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS |
EN 13445-2:2014/A2:2018 | UNFIRED PRESSURE VESSELS - PART 2: MATERIALS |
DIN EN 1092-1:2016-05 (Draft) | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
BS EN 16125:2015 | LPG Equipment and Accessories. Pipework systems and supports. LPG in liquid phase and vapour pressure phase |
I.S. EN 1092-1:2007 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES,FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
I.S. EN 14917:2009 | METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
DIN EN 448:2016-02 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
DIN EN 14394 E : 2008 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
DIN EN 14394:2008-12 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
UNE-EN 13445-4:2015 | Unfired pressure vessels - Part 4: Fabrication |
UNI EN 10079 : 2007 | DEFINITION OF STEEL PRODUCTS |
UNI EN 13941 : 2011 | DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
UNI EN 14394 : 2008 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREES C |
UNI EN 12952-2 : 2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
UNI EN 12953-2 : 2012 | SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
13/30281974 DC : 0 | BS EN 16617 - PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING |
09/30186448 DC : 0 | BS EN 13941 - DESIGN AND INSTALLATION OF REINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
16/30336440 DC : DRAFT MAR 2016 | BS EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
PREN 16617 : DRAFT 2013 | PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING |
13/30276940 DC : 0 | BS EN 16125 - LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE |
UNI EN 14917 : 2012 | METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
UNE-EN 16617:2015 | Pipework - Corrugated metal hose assemblies for combustible gas - Performance requirements, testing and marking |
EN 1092-1:2018 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges |
UNI EN 1092-1 : 2013 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
BS EN 13480-2:2017+A3:2018 | Metallic industrial piping Materials |
DIN EN 14015:2005-02 | Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above |
DIN EN 253:2015-12 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PIPE ASSEMBLY OF STEEL SERVICE PIPE, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
BS EN 14394 : 2005 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
BS EN 14620-2:2006 | Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0°C and -165°C Metallic components |
BS EN 14879-1:2005 | 0rganic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Terminology, design and preparation of substrate |
UNE-EN 12952-2:2012 | Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
UNE-EN 12953-2:2013 | Shell boilers - Part 2: Materials for pressure parts of boilers and accessories |
BS EN 10079:2007 | Definition of steel products |
EN 13480-2:2017 | Metallic industrial piping - Part 2: Materials |
BS EN 12007-3:2000 | Gas supply systems. Pipelines for maximum operating pressure up to and including 16 bar Specific functional recommendations for steel |
UNE-EN 448:2017 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
BS EN 13941 : 2009 | DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
UNE-EN 12007-3:2015 | Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel |
EN 14394:2005+A1:2008 | Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C |
EN 13941:2009+A1:2010 | Design and installation of preinsulated bonded pipe systems for district heating |
EN 253:2009+A2:2015 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene |
EN 16125:2015 | LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
EN 14015:2004 | Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above |
EN 14620-2:2006 | Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 2: Metallic components |
EN 286-1:1998/A2:2005 | SIMPLE UNFIRED PRESSURE VESSELS DESIGNED TO CONTAIN AIR OR NITROGEN - PART 1: PRESSURE VESSELS FOR GENERAL PURPOSES |
EN 448:2015 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
EN 16617 : 2015 | PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING |
EN 14879-1:2005 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate |
DIN EN 16125:2016-03 | LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE |
PREN 10253-2 : DRAFT 2017 | BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
BS EN 10253-2:2007 | Butt-welding pipe fittings Non alloy and ferritic alloy steels with specific inspection requirements |
S.R. CEN ISO/TR 20172:2021 | Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021) |
DIN EN 16617 E : 2015 | PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING |
I.S. CEN ISO TR 20172:2006 | WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS |
18/30368651 DC : 0 | BS EN 448 - DISTRICT HEATING PIPES - BONDED SINGLE PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FACTORY MADE FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND A CASING OF POLYETHYLENE |
BS EN 13445-2 : 2014 | UNFIRED PRESSURE VESSELS - PART 2: MATERIALS |
UNE-EN 13445-2:2015 | Unfired pressure vessels - Part 2: Materials |
EN 12953-4:2018 | Shell boilers - Part 4: Workmanship and construction of pressure parts of the boiler |
UNE-EN 14917:2011 | Metal bellows expansion joints for pressure applications |
BS EN 448:2015 | District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
DIN EN 12953-2:2012-05 | Shell boilers - Part 2: Materials for pressure parts of boilers and accessories |
DIN EN 12952-2:2011-10 | Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
BS EN 13445-4 : 2014 | UNFIRED PRESSURE VESSELS - PART 4: FABRICATION |
BS EN 12953-2:2012 | Shell boilers Materials for pressure parts of boilers and accessories |
BS EN 286-1 : 1998 | SIMPLE UNFIRED PRESSURE VESSELS DESIGNED TO CONTAIN AIR OR NITROGEN - PART 1: PRESSURE VESSELS FOR GENERAL PURPOSES |
BS EN 12952-2:2011 | Water-tube boilers and auxiliary installations Materials for pressure parts of boilers and accessories |
ISO/TR 20172:2009 | Welding Grouping systems for materials European materials |
EN 12007-3:2015 | Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel |
DIN EN 10079:2007-06 | Definition of steel products |
ONORM EN 10253-2 : 2008 | BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
UNE-EN 13480-2:2017 | Metallic industrial piping - Part 2: Materials (Endorsed by Asociación Española de Normalización in September of 2019.) |
EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
EN 10052:1993 | Vocabulary of heat treatment terms for ferrous products |
EN 10246-1:1996 | Non destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness |
CR 10261 : 1995 | ECISS INFORMATION CIRCULAR 11 - IRON AND STEEL - REVIEW OF AVAILABLE METHODS OF CHEMICAL ANALYSIS |
EN 10234 : 1993 | METALLIC MATERIALS - TUBE - DRIFT EXPANDING TEST |
EN 10027-2:2015 | DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM |
EN 10237 : 1993 | METALLIC MATERIALS - TUBE - RING TENSILE TEST |
EN 10002-5:1991 | Metallic materials - Tensile testing - Part 5: Method of testing at elevated temperature |
EN 10246-6:1999 | Non-destructive testing of steel tubes - Part 6: Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections |
EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
EN 10256:2000 | Non-destructive testing of steel tubes - Qualification and competence of level 1 and 2 non-destructive testing personnel |
EN ISO 2566-1:1999 | Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984) |
EN 473:2008 | Non-destructive testing - Qualification and certification of NDT personnel - General principles |
EN 10045-1 : 1990 | METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
EN 10236 : 1993 | METALLIC MATERIALS - TUBE - RING EXPANDING TEST |
EN 10246-7:2005 | Non-destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) tubes for the detection of longitudinal imperfections |
EN 10021:2006 | General technical delivery conditions for steel products |
ISO 2566-1:1984 | Steel Conversion of elongation values Part 1: Carbon and low alloy steels |
EN 10233 : 1993 | METALLIC MATERIALS - TUBE - FLATTENING TEST |
EN 10204:2004 | Metallic products - Types of inspection documents |
EN 10246-3:1999 | Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections |
EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
ENV 10220 : 1993 | SEAMLESS AND WELDED STEEL TUBES - DIMENSIONS AND MASSES PER UNIT LENGTH |
EN 10020:2000 | Definition and classification of grades of steel |
EN 10246-14:1999 | Non-destructive testing of steel tubes - Part 14: Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections |
ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
EN 10246-8:1999 | Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections |
1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
CR 10260 : 1998 | DESIGNATION SYSTEMS FOR STEEL - ADDITIONAL SYMBOLS |
EN 10246-5 : 1999 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 5: AUTOMATIC FULL PERIPHERAL MAGNETIC TRANSDUCER/FLUX LEAKAGE TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC WELDED) FERROMAGNETIC STEEL TUBES FOR THE DETECTION OF LONGITUDINAL IMPERFECTIONS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.