• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 10271:1998

Current
Current

The latest, up-to-date edition.

Electrolytically zinc-nickel (ZN) coated steel flat products - Technical delivery conditions
Published date

18-11-1998

1 Scope
2 Normative references
3 Definitions
4 Designation
5 Requirements
   5.1 General
   5.2 Steelmaking and manufacturing process
   5.3 Deoxidation
   5.4 Chemical composition
   5.5 Delivery condition
   5.6 Choice of properties
   5.7 Mechanical properties
   5.8 Stretcher strain marks
   5.9 Coatings
   5.10 Adhesion of coating
   5.11 Surface characteristics
   5.12 Surface treatment
   5.13 Applications
   5.14 Mass, tolerances on dimensions and shape
6 Testing
   6.1 General
   6.2 Test units
   6.3 Number of tests
   6.4 Sampling
   6.5 Test methods
   6.6 Retests
   6.7 Inspection documents
7 Marking
8 Packing
9 Storage and transportation
10 Information to be supplied by the purchaser
Annex A (informative) Bibliography
Annex B (normative) Reference method for determination
                       of the zinc-nickel coating mass and the
                       zinc-nickel coating composition

This European Standard specifies requirements for continuously electrolytic zinc-nickel coated cold rolled flat products of low carbon steels suitable for cold forming according to table 1 and table 2 in rolled widths >= 600 mm and thicknesses from 0,35 mm up to and including 3 mm, delivered as strip (in coil form), sheet, slit strip or cut lengths obtained from slit strip or sheet. The coating is composed of Zn with a Ni-content of 10,5% to 13%.

Committee
CEN/TC 459/SC 9
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

Standards Relationship
UNI EN 10271 : 2000 Identical
BS EN 10271:1999 Identical
I.S. EN 10271:1999 Identical
NEN EN 10271 : 1998 Identical
UNE-EN 10271:1999 Identical
NBN EN 10271 : 1999 Identical
PN EN 10271 : 2001 Identical
NF EN 10271 : 1999 Identical
NEN EN 10271 : 1998 Similar to
SN EN 10271 : 1999 Identical
NS EN 10271 : 1ED 1999 Identical
NBN EN 10271 : 1999 Similar to
DIN EN 10271:1998-12 Identical

DIN EN 10131:2006-09 Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape
02/713774 DC : DRAFT DEC 2002 EN 10336 - CONTINUOUSLY HOT-DIP COATED AND ELECTROLYTICALLY COATED STRIP AND SHEET OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
EN 10131:2006 (edition 2) Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape
I.S. EN 10131:2006 COLD ROLLED UNCOATED AND ZINC OR ZINC-NICKEL ELECTROLYTICALLY COATED LOW CARBON AND HIGH YIELD STRENGTH STEEL FLAT PRODUCTS FOR COLD FORMING - TOLERANCES ON DIMENSIONS AND SHAPE
02/713545 DC : DRAFT NOV 2002 EN 10131 - COLD ROLLED UNCOATED LOW CARBON AND HIGH YIELD STRENGTH STEEL FLAT PRODUCTS FOR COLD FORMING - TOLERANCES ON DIMENSIONS AND SHAPE
UNI EN 10131 : 2006 COLD ROLLED UNCOATED AND ZINC OR ZINC-NICHEL ELECTROLYTICALLY COATED LOW CARBON AND HIGH YIELD STRENGTH STEEL FLAT PRODUCTS FOR COLD FORMING - TOLERANCES ON DIMENSIONS AND SHAPE
I.S. EN 10336:2007 CONTINUOUSLY HOT-DIP COATED AND ELECTROLYTICALLY COATED STRIP AND SHEET OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
BS EN 10336:2007 Continuously hot-dip coated and electrolytically coated strip and sheet of multiphase steels for cold forming. Technical delivery conditions
BS EN 10131:2006 Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming. Tolerances on dimensions and shape
PD CR 10313:2000 Classification of grades of steel. Examples of classification related to European standards
S.R. CR 10313:2000 CLASSIFICATION OF GRADES OF STEEL - EXAMPLES OF CLASSIFICATION RELATED TO EUROPEAN STANDARDS
DIN EN 10336:2007-07 CONTINUOUSLY HOT-DIP COATED AND ELECTROLYTICALLY COATED STRIP AND SHEET OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
EN 10336:2007 Continuously hot-dip coated and electrolytically coated strip and sheet of multiphase steels for cold forming - Technical delivery conditions
CR 10313:2000 Classification of grades of steel - Examples of classification related to European Standards

ISO 10275:2007 Metallic materials Sheet and strip Determination of tensile strain hardening exponent
EN 10002-1 : 2001 METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE
EN 10147 : 2000 CONTINUOUSLY HOT-DIP ZINC COATED STRUCTURAL STEELS SHEET AND STRIP - TECHNICAL DELIVERY CONDITIONS
ENV 10169-2 : 1999 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS
EN 10079:2007 Definition of steel products
EN 10169-1:2003 Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods)
EN 10027-2:2015 DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
EN 10002-2 : 1991 METALLIC MATERIALS - TENSILE TESTING - PART 2: VERIFICATION OF THE FORCE MEASURING SYSTEM OF THE TENSILE TESTING MACHINE
EN 10152:2017 Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions
EN 10268:2006+A1:2013 COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
EN 10142 : 2000 CONTINUOUSLY HOT-DIP ZINC COATED LOW CARBON STEELS SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
EN 10215 : 1995 CONTINUOUSLY HOT-DIP ALUMINIUM-ZINC (AZ) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS
EN 10139:2016 Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions
EN 10131:2006 (edition 2) Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape
EN 10154 : 2002 CONTINUOUSLY HOT-DIP ALUMINIUM-SILICON (AS) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS
ENV 606 : DRAFT 1993 BAR CODED TRANSPORT AND HANDLING LABELS FOR STEEL PRODUCTS
EN 10021:2006 General technical delivery conditions for steel products
EURONORM 12 : 1955 FOLDING TEST OF SHEET STEELS AND STRIPS WITH A THICKNESS OF LESS THAN 3 MM
EN 10204:2004 Metallic products - Types of inspection documents
EN 10214 : 1995 CONTINUOUSLY HOT-DIP ZINC-ALUMINIUM (ZA) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS
EN 10130:2006 Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions
EN 10027-1:2016 Designation systems for steels - Part 1: Steel names
ISO 10113:2006 Metallic materials Sheet and strip Determination of plastic strain ratio
EN 10002-4 : 1994 METALLIC MATERIALS - TENSILE TEST - VERIFICATION OF EXTENSOMETERS USED IN UNIAXIAL TESTING
EN 10020:2000 Definition and classification of grades of steel
CR 10260 : 1998 DESIGNATION SYSTEMS FOR STEEL - ADDITIONAL SYMBOLS

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.