EN 1097-2:2010
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation
Superseded date
22-04-2020
Published date
24-03-2010
Publisher
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Apparatus
5 Determination of resistance to fragmentation by the Los
Angeles test method
6 Determination of resistance to fragmentation by the impact
test method
Annex A (normative) - Determination of the resistance to
fragmentation of aggregates for railway ballast
Annex B (informative) - Alternative narrow range classifications
for the Los Angeles test
Annex C (informative) - The impact tester: Construction, operation
and safety requirements
Annex D (informative) - Checking of the impact tester
Annex E (informative) - Precision
Annex F (informative) - Worked example of calculation of impact
value SZ
Annex G (informative) - Alternative narrow range classification for
the Los Angeles test of 16/32 mm recycled aggregates
Bibliography
This European Standard describes the reference method, the Los Angeles test, used for type testing and in case of dispute (and an alternative method, the impact test) for determining the resistance to fragmentation of coarse aggregates and aggregates for railway ballast (Annex A). For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established.This European Standard applies to natural, manufactured or recycled aggregates used in building and civil engineering.
| Committee |
CEN/TC 154
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| ONORM EN 1097-2 : 2010 | Identical |
| NBN EN 1097-2 : 2010 | Identical |
| NEN EN 1097-2 : 2010 | Identical |
| NS EN 1097-2 : 2010 | Identical |
| I.S. EN 1097-2:2010 | Identical |
| PN EN 1097-2 : 2010 | Identical |
| SN 670903-2C : 2010 | Identical |
| SN EN 1097-2 : 2010 | Identical |
| UNI EN 1097-2 : 2010 | Identical |
| SS-EN 1097-2:2010 | Identical |
| UNE-EN 1097-2:2010 | Identical |
| BS EN 1097-2:2010 | Identical |
| NF EN 1097-2 : 2010 | Identical |
| DIN EN 1097-2:2016-07 (Draft) | Identical |
| DIN EN 1097-2:2010-07 | Identical |
| 02/102929 DC : 0 | PREN 14440 - SLURRY SURFACING - FACTORY PRODUCTION CONTROL |
| PREN 12697-17 : DRAFT 2015 | BITUMINOUS MIXTURES - TEST METHODS - PART 17: PARTICLE LOSS OF POROUS ASPHALT SPECIMEN |
| PREN 13450 : DRAFT 2015 | AGGREGATES FOR RAILWAY BALLAST |
| UNI EN 12273 : 2008 | SLURRY SURFACING - REQUIREMENTS |
| I.S. EN 12273:2008 | SLURRY SURFACING - REQUIREMENTS |
| BS EN 14731:2005 | Execution of special geotechnical works. Ground treatment by deep vibration |
| BS EN 13450:2013 | Aggregates for railway ballast |
| BS EN 13242:2013 | Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction |
| BS EN 1367-3:2001 | Tests for thermal and weathering properties of aggregates Boiling test for Sonnenbrand basalt |
| EN 12273:2008 | Slurry surfacing - Requirements |
| EN 13450:2002/AC:2004 | AGGREGATES FOR RAILWAY BALLAST |
| EN 12620:2002+A1:2008 | Aggregates for concrete |
| EN 13043:2002/AC:2004 | AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS |
| PREN 16236 : DRAFT 2015 | EVALUATION OF CONFORMITY OF AGGREGATES - INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| DIN 4226-1:2001-07 | AGGREGATES FOR CONCRETE AND MORTAR - PART 1: NORMAL AND HEAVY-WEIGHT AGGREGATES |
| 15/30311097 DC : 0 | BS EN 13450 - AGGREGATES FOR RAILWAY BALLAST |
| 12/30256925 DC : 0 | BS EN 13055 - LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR, GROUT, BITUMINOUS MIXTURES, SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS |
| PREN 12620 : DRAFT 2015 | AGGREGATES FOR CONCRETE |
| BS EN 12273:2008 | Slurry surfacing. Requirements |
| I.S. EN 13055:2016 | LIGHTWEIGHT AGGREGATES |
| DIN EN 1367-1:2007-06 | Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing |
| DIN EN 1367-5:2011-04 | Tests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock |
| I.S. EN 1367-1:2007 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING |
| I.S. EN 13450:2013 | AGGREGATES FOR RAILWAY BALLAST |
| I.S. EN 1367-5:2011 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF RESISTANCE TO THERMAL SHOCK |
| I.S. EN 12697-17:2017 | BITUMINOUS MIXTURES - TEST METHODS - PART 17: PARTICLE LOSS OF POROUS ASPHALT SPECIMENS |
| 15/30330761 DC : 0 | BS EN 12697-17 - BITUMINOUS MIXTURES - TEST METHODS - PART 17: PARTICLE LOSS OF POROUS ASPHALT SPECIMEN |
| BS EN 13055:2016 | Lightweight aggregates |
| ISO/TS 19708:2007 | Geosynthetics Procedure for simulating damage under interlocking-concrete-block pavement by the roller compactor method |
| 15/30311103 DC : 0 | BS EN 13242 - AGGREGATES FOR UNBOUND AND HYDRAULICALLY BOUND MATERIALS FOR USE IN CIVIL ENGINEERING WORK AND ROAD CONSTRUCTION |
| 06/30149762 DC : 0 | EN 12273 - SLURRY SURFACING - SPECIFICATIONS |
| DIN EN 12697-17:2015-12 (Draft) | BITUMINOUS MIXTURES - TEST METHODS - PART 17: PARTICLE LOSS OF POROUS ASPHALT SPECIMENS |
| DIN EN 14731 E : 2005 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - GROUND TREATMENT BY DEEP VIBRATION |
| EEMUA 207 : 2009 | DOUBLE CONCRETE TANKS FOR LIQUEFIED GAS - GUIDE TO DESIGN, CONSTRUCTION AND OPERATION |
| EN 12697-17:2017 | Bituminous mixtures - Test methods - Part 17: Particle loss of porous asphalt specimens |
| UNI EN 1367-1 : 2007 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING |
| UNI EN 13242 : 2013 | AGGREGATES FOR UNBOUND AND HYDRAULICALLY BOUND MATERIALS FOR USE IN CIVIL ENGINEERING WORK AND ROAD CONSTRUCTION |
| UNI EN 13043 : 2013 | AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS |
| UNI EN 1367-5 : 2011 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF RESISTANCE TO THERMAL SHOCK |
| I.S. EN 13043:2013 | AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS |
| UNI EN 12620 : 2013 | AGGREGATES FOR CONCRETE |
| UNI EN 13450 : 2013 | AGGREGATES FOR RAILWAY BALLAST |
| DD ISO/TS 19708:2007 | Geosynthetics. Procedure for simulating damage under interlocking-concrete-block pavement by the roller compactor method |
| PREN 13043 : DRAFT 2015 | AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS |
| ISO 19595:2017 | Natural aggregates for concrete |
| 15/30311106 DC : 0 | BS EN 16236 - EVALUATION OF CONFORMITY OF AGGREGATES - INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| 15/30326284 DC : 0 | BS EN 16907-2 - EARTHWORKS - PART 2: CLASSIFICATION OF MATERIALS |
| PREN 13242 : DRAFT 2015 | AGGREGATES FOR UNBOUND AND HYDRAULICALLY BOUND MATERIALS FOR USE IN CIVIL ENGINEERING WORK AND ROAD CONSTRUCTION |
| BS EN 12620:2013 | Aggregates for concrete |
| BS EN 1367-1:2007 | Tests for thermal and weathering properties of aggregates Determination of resistance to freezing and thawing |
| BS EN 1367-5:2011 | Tests for thermal and weathering properties of aggregates Determination of resistance to thermal shock |
| EN 14731:2005 | Execution of special geotechnical works - Ground treatment by deep vibration |
| EN 1367-5:2011 | Tests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock |
| EN 1367-3:2001/AC:2004 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 3: BOILING TEST FOR "SONNENBRAND BASALT" |
| EN 1367-1:2007 | Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing |
| 11/30249131 DC : 0 | BS EN 16333 - SLURRY SURFACING - SPECIFICATION FOR AIRFIELDS |
| DIN EN 12273:2008-08 | Slurry surfacing - Requirements |
| BS EN 12697-17:2017 | Bituminous mixtures. Test methods Particle loss of porous asphalt specimens |
| UNE-EN 1367-5:2011 | Tests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock |
| BS EN 13043:2013 | Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas |
| EN 13055 : 2016 | LIGHTWEIGHT AGGREGATES |
| DIN EN 14731:2005-12 | Execution of special geotechnical works - Ground treatment by deep vibration |
| EN 13242:2002+A1:2007 | Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction |
| EN ISO 6508-1:2016 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) |
| EN 932-2:1999 | Tests for general properties of aggregates - Part 2: Methods for reducing laboratory samples |
| DIN 52115-2:2014-02 | TEST METHODS FOR AGGREGATES - PART 2: IMPACT TEST ON CRUSHED AND BROKEN AGGREGATES LARGER THAN 32 MM |
| ISO 1874-1:2010 | Plastics Polyamide (PA) moulding and extrusion materials Part 1: Designation system and basis for specification |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ISO 4957:1999 | Tool steels |
| EN 933-2:1995 | Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apterures |
| EN ISO 4957:1999 | Tool steels (ISO 4957:1999) |
| ISO 4762:2004 | Hexagon socket head cap screws |
| ISO 3302-1:2014 | Rubber — Tolerances for products — Part 1: Dimensional tolerances |
| EN 933-1:2012 | Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
| ISO 683-11:2012 | Heat-treatable steels, alloy steels and free-cutting steels Part 11: Case-hardening steels |
| ISO 2768-2:1989 | GENERAL TOLERANCES - PART 2: GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS |
| EN 932-5:2012/AC:2014 | TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5: COMMON EQUIPMENT AND CALIBRATION |
| EN 10025-2:2004/AC:2005 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| EN 10083-2:2006 | Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels |
| ISO 185:2005 | Grey cast irons Classification |
| EN 1097-6:2013 | Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| ISO 8062:1994 | Castings System of dimensional tolerances and machining allowances |
| EN 932-1:1996 | Tests for general properties of aggregates - Part 1: Methods for sampling |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.