EN 12205:2001
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Transportable gas cylinders - Non refillable metallic gas cylinders
Superseded date
01-10-2015
Published date
09-05-2001
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 Requirements
5 Design
6 Construction and workmanship
7 Tests
8 Inspection
9 Markings
Annex A (normative) Prototype and production testing
Bibliography
This European Standard specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes and tests at manufacture of non-refillable metallic gas cylinders of welded, brazed or seamless construction used for compressed, liquefied and dissolved gases.This Standard is not applicable to cartridges/aerosol dispensers and spherical containers.NOTEFor cartridges, see EN 417
| Committee |
CEN/TC 23
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| UNE-EN 12205:2002 | Identical |
| I.S. EN 12205:2001 | Identical |
| NS EN 12205 : 1ED 2001 | Identical |
| SN EN 12205 : 2001 | Identical |
| NF EN 12205 : 2001 | Identical |
| UNI EN 12205 : 2004 | Identical |
| BS EN 12205:2001 | Identical |
| NEN EN 12205 : 2001 | Identical |
| NBN EN 12205 : 2001 | Identical |
| PN EN 12205 : 2002 | Identical |
| DIN EN 12205:2001-10 | Identical |
| DIN EN 16509:2014-12 | TRANSPORTABLE GAS CYLINDERS - NON-REFILLABLE, SMALL TRANSPORTABLE, STEEL CYLINDERS OF CAPACITIES UP TO AND INCLUDING 120 ML CONTAINING COMPRESSED OR LIQUEFIED GASES (COMPACT CYLINDERS) - DESIGN, CONSTRUCTION, FILLING AND TESTING |
| BS EN 16509:2014 | Transportable gas cylinders. Non-refillable, small transportable, steel cylinders of capacities up to and including 120 ml containing compressed or liquefied gases (compact cylinders). Design, construction, filling and testing |
| EN 12101-10:2005/AC:2007 | SMOKE AND HEAT CONTROL SYSTEMS - PART 10: POWER SUPPLIES |
| BS ISO 21927-10:2011 | Smoke and heat control systems Specification for power output devices |
| ISO 21927-10:2011 | Smoke and heat control systems — Part 10: Specification for power output devices |
| I.S. EN 16509:2014 | TRANSPORTABLE GAS CYLINDERS - NON-REFILLABLE, SMALL TRANSPORTABLE, STEEL CYLINDERS OF CAPACITIES UP TO AND INCLUDING 120 ML CONTAINING COMPRESSED OR LIQUEFIED GASES (COMPACT CYLINDERS) - DESIGN, CONSTRUCTION, FILLING AND TESTING |
| UNE-EN 16509:2015 | Transportable gas cylinders - Non-refillable, small transportable, steel cylinders of capacities up to and including 120 ml containing compressed or liquefied gases (compact cylinders) - Design, construction, filling and testing |
| UNI EN 16509 : 2014 | TRANSPORTABLE GAS CYLINDERS - NON-REFILLABLE, SMALL TRANSPORTABLE, STEEL CYLINDERS OF CAPACITIES UP TO AND INCLUDING 120 ML CONTAINING COMPRESSED OR LIQUEFIED GASES (COMPACT CYLINDERS) - DESIGN, CONSTRUCTION, FILLING AND TESTING |
| DIN EN 12101-10:2006-01 | SMOKE AND HEAT CONTROL SYSTEMS - PART 10: POWER SUPPLIES |
| BS EN 12101-10:2005 | Smoke and heat control systems Power supplies |
| EN 16509:2014 | Transportable gas cylinders - Non-refillable, small transportable, steel cylinders of capacities up to and including 120 ml containing compressed or liquefied gases (compact cylinders) - Design, construction, filling and testing |
| DIN EN 16509 E : 2014 | TRANSPORTABLE GAS CYLINDERS - NON-REFILLABLE, SMALL TRANSPORTABLE, STEEL CYLINDERS OF CAPACITIES UP TO AND INCLUDING 120 ML CONTAINING COMPRESSED OR LIQUEFIED GASES (COMPACT CYLINDERS) - DESIGN, CONSTRUCTION, FILLING AND TESTING |
| EN 1975:1999/A1:2003 | TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE TRANSPORTABLE SEAMLESS ALUMINIUM AND ALUMINIUM ALLOY GAS CYLINDERS OF CAPACITY FROM 0.5 LITRE UP TO 150 LITRE |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN 10120:2017 | Steel sheet and strip for welded gas cylinders |
| ISO 11114-1:2012 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials |
| EN 288-1:1992/A1:1997 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES FOR FUSION WELDING |
| EN ISO 11120:2015 | Gas cylinders - Refillable seamless steel tubes of water capacity between 150 l and 3000 l - Design, construction and testing (ISO 11120:2015) |
| ISO 13340:2001 | Transportable gas cylinders Cylinders valves for non-refillable cylinders Specification and prototype testing |
| EN 1964-1:1999/AC:1999 | TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE TRANSPORTABLE SEAMLESS STEEL GAS CYLINDERS OF WATER CAPACITIES FROM 0.5 LITRE UP TO AND INCLUDING 150 LITRES - PART 1: CYLINDERS MADE OF SEAMLESS STEEL WITH AN RM VALUE OF LESS THAN 1100 MPA |
| EN 12862:2000 | Transportable gas cylinders - Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders |
| EN 417:2012 | Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances - Construction, inspection, testing and marking |
| PREN 1964-2 : DRAFT 1998 | TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE TRANSPORTABLE SEAMLESS STEEL GAS CYLINDERS FROM 0.5 LITRE UP TO AND INCLUDING 150 LITRES - TENSILE STRENGTH |
| EN 1964-3:2000 | Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres - Part 3: Cylinders made of seamless stainless steel with an Rm value of less than 1100 MPa |
| EN ISO 3166-1:2014 | Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013) |
| EN ISO 11114-1:2012/A1:2017 | GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 1: METALLIC MATERIALS (ISO 11114-1: 2012/AMD 1:2017) |
| EN 13133:2000 | Brazing - Brazer approval |
| ISO 4706:2008 | Gas cylinders — Refillable welded steel cylinders — Test pressure 60 bar and below |
| EN 287-2:1992/A1:1997 | APPROVAL TESTING OF WELDERS - FUSION WELDING - ALUMINIUM AND ALUMINIUM ALLOYS |
| ISO 11120:2015 | Gas cylinders Refillable seamless steel tubes of water capacity between 150 l and 3000 l Design, construction and testing |
| EN 1800:2006 | Transportable gas cylinders - Acetylene cylinders - Basic requirements, definitions and type testing |
| EN 10130:2006 | Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions |
| EN 13134:2000 | Brazing - Procedure approval |
| ISO 3166-1:2013 | Codes for the representation of names of countries and their subdivisions Part 1: Country codes |
| EN ISO 13340:2001 | Transportable gas cylinders - Cylinder valves for non-refillable cylinders - Specification and prototype testing (ISO 13340:2001) |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.