EN 12390-2:2009
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Testing hardened concrete - Part 2: Making and curing specimens for strength tests
Superseded date
26-06-2019
Published date
08-04-2009
Publisher
Foreword
1 Scope
2 Normative references
3 Apparatus
4 Sampling
5 Procedures
6 Report
This European Standard specifies methods for making and curing test specimens for strength tests. It coversthe preparation and filling of moulds, compaction of the concrete, levelling the surface, curing of testspecimens and transporting test specimens.
| Committee |
CEN/TC 104
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| SN EN 12390-2 : 2009 | Identical |
| NF EN 12390-2 : 2012 | Identical |
| I.S. EN 12390-2:2009 | Identical |
| PN EN 12390-2 : 2011 | Identical |
| NBN EN 12390-2 : 2009 | Identical |
| UNI EN 12390-2 : 2009 | Identical |
| DIN EN 12390-2:2009-08 | Identical |
| NEN EN 12390-2 : 2009 | Identical |
| NS EN 12390-2 : 2009 | Identical |
| BS EN 12390-2:2009 | Identical |
| UNE-EN 12390-2:2009 | Identical |
| ONORM EN 12390-2 : 2009 | Identical |
| DIN EN 12390-11 E : 2015 | TESTING HARDENED CONCRETE - PART 11: DETERMINATION OF THE CHLORIDE RESISTANCE OF CONCRETE, UNIDIRECTIONAL DIFFUSION |
| 17/30360072 DC : 0 | BS EN 12390-5 - TESTING HARDENED CONCRETE - PART 5: FLEXURAL STRENGTH OF TEST SPECIMENS |
| S.R. CEN/TR 15678:2008 | CONCRETE - RELEASE OF REGULATED DANGEROUS SUBSTANCES INTO SOIL, GROUNDWATER AND SURFACE WATER - TEST METHOD FOR NEW OR UNAPPROVED CONSTITUENTS OF CONCRETE AND FOR PRODUCTION CONCRETES |
| PD CEN/TR 15678:2008 | Concrete. Release of regulated dangerous substances into soil, groundwater and surface water. Test method for new or unapproved constituents of concrete and for production concretes |
| 17/30354239 DC : 0 | BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| DIN EN 12390-11:2015-11 | TESTING HARDENED CONCRETE - PART 11: DETERMINATION OF THE CHLORIDE RESISTANCE OF CONCRETE |
| I.S. EN 480-15:2013 | ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 15: REFERENCE CONCRETE AND METHOD FOR TESTING VISCOSITY MODIFYING ADMIXTURES |
| BS EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Site application of products and systems and quality control of the works |
| 17/30351884 DC : 0 | BS EN 12390-10 - TESTING HARDENED CONCRETE - PART 10: DETERMINATION OF THE CARBONATION RESISTANCE OF CONCRETE AT ATMOSPHERIC LEVELS OF CARBON DIOXIDE |
| 05/30131382 DC : DRAFT MAR 2005 | BS EN 15184 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - SHEAR ADHESION COATED STEEL TO CONCRETE (PULL-OUT TEST) |
| 03/302295 DC : DRAFT APR 2003 | EN 14651 - PRECAST CONCRETE PRODUCTS - TEST METHOD FOR METALLIC FIBER CONCRETE - MEASURING THE FLEXURAL TENSILE STRENGTH |
| EN 12504-4:2004 | Testing concrete - Part 4: Determination of ultrasonic pulse velocity |
| ONORM EN 12390-5 : 2009 | TESTING HARDENED CONCRETE - PART 5: FLEXURAL STRENGTH OF TEST SPECIMENS |
| S.R. CEN TS 1992-4-1:2009 | DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL |
| EN 12390-13:2013 | Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression |
| I.S. EN ISO 21809-5:2017 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS (ISO 21809-5:2017) |
| BS EN 206 : 2013 | CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| DD CEN/TS 1992-4-1:2009 | Design of fastenings for use in concrete General |
| S.R. CEN/TR 16563:2013 | PRINCIPLES OF THE EQUIVALENT DURABILITY PROCEDURE |
| 15/30317321 DC : 0 | BS EN 14944-1 - INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF MIGRATION FROM FACTORY MADE CEMENTITIOUS PRODUCTS ON THE ORGANOLEPTIC PARAMETERS |
| I.S. EN 12390-8:2009 | TESTING HARDENED CONCRETE - PART 8: DEPTH OF PENETRATION OF WATER UNDER PRESSURE |
| BS EN 13791:2007 | Assessment of in-situ compressive strength in structures and pre-cast concrete components |
| BS EN 13877-1:2013 | Concrete pavements Materials |
| UNE-EN 13877-2:2013 | Concrete pavements - Part 2: Functional requirements for concrete pavements |
| PD CEN/TR 15177:2006 | Testing the freeze-thaw resistance of concrete. Internal structural damage |
| BS EN 12390-8:2009 | Testing hardened concrete Depth of penetration of water under pressure |
| DIN EN 1881:2007-01 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - TESTING OF ANCHORING PRODUCTS BY THE PULL-OUT METHOD |
| CEN/TS 1992-4-1:2009 | Design of fastenings for use in concrete - Part 4-1: General |
| EN 12390-3:2009/AC:2011 | TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
| DIN EN 14891:2017-05 | LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, ASSESSMENT AND VERIFICATION OF CONSTANCY OF PERFORMANCE, CLASSIFICATION AND MARKING |
| DIN EN 14651:2007-12 | TEST METHOD FOR METALLIC FIBERED CONCRETE - MEASURING THE FLEXURAL TENSILE STRENGTH (LIMIT OF PROPORTIONALITY (LOP), RESIDUAL) |
| EN 12390-5:2009 | Testing hardened concrete - Part 5: Flexural strength of test specimens |
| DIN EN 12504-4:2004-12 | Testing concrete in structures - Part 4: Determination of ultrasonic pulse velocity |
| CEN/TR 15177:2006 | Testing the freeze-thaw resistance of concrete - Internal structural damage |
| CEN/TS 12390-9:2016 | Testing hardened concrete - Part 9: Freeze-thaw resistance with de-icing salts - Scaling |
| CEN/TR 16563:2013 | Principles of the equivalent durability procedure |
| EN 12390-11:2015 | Testing hardened concrete - Part 11: Determination of the chloride resistance of concrete, unidirectional diffusion |
| EN 1354:2005 | Determination of compressive strength of lightweight aggregate concrete with open structure |
| EN 1168:2005+A3:2011 | Precast concrete products - Hollow core slabs |
| EN 12390-8:2009 | Testing hardened concrete - Part 8: Depth of penetration of water under pressure |
| I.S. EN 14944-1:2006 | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF FACTORY MADE CEMENTITIOUS PRODUCTS ON ORGANOLEPTIC PARAMETERS |
| UNI EN 480-15 : 2013 | ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 15: REFERENCE CONCRETE AND METHOD FOR TESTING VISCOSITY MODIFYING ADMIXTURES |
| 12/30259409 DC : 0 | BS EN 12390-13 - TESTING HARDENED CONCRETE - PART 13: DETERMINATION OF SECANT MODULUS OF ELASTICITY IN COMPRESSION |
| 16/30338749 DC : 0 | BS EN ISO 21809-5 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS |
| BS EN 480-15:2013 | Admixtures for concrete, mortar and grout. Test methods Reference concrete and method for testing viscosity modifying admixtures |
| BS EN 12390-11:2015 | Testing hardened concrete Determination of the chloride resistance of concrete, unidirectional diffusion |
| S.R. CEN TS 12390-10:2007 | TESTING HARDENED CONCRETE - PART 10: DETERMINATION OF THE RELATIVE CARBONATION RESISTANCE OF CONCRETE |
| I.S. EN 13791:2007 | ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS |
| DIN 1045-4:2012-02 | Concrete, reinforced and prestressed concrete structures - Part 4: Additional rules for the production and the conformity of prefabricated elements |
| BS EN ISO 21809-5:2017 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems External concrete coatings |
| 11/30248435 DC : 0 | BS EN 14891 - LIQUID-APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION |
| 10/30218985 DC : DRAFT JUNE 2010 | BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| 14/30314741 DC : 0 | BS EN 14891 - LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION |
| UNI CEN/TS 1992-4-1 : 2009 | DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL |
| BS EN 13369:2013 | Common rules for precast concrete products |
| PREN 12390-17 : DRAFT 2018 | TESTING HARDENED CONCRETE - PART 17: DETERMINATION OF CREEP OF CONCRETE IN COMPRESSION |
| PREN 12390-8 : DRAFT 2017 | TESTING HARDENED CONCRETE - PART 8: DEPTH OF PENETRATION OF WATER UNDER PRESSURE |
| DIN EN 12839:2012-03 | PRECAST CONCRETE PRODUCTS - ELEMENTS FOR FENCES |
| DIN EN 15184 E : 2006 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - SHEAR ADHESION OF COATED STEEL TO CONCRETE (PULL-OUT TEST) |
| DIN EN 14891 E : 2017 | LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, ASSESSMENT AND VERIFICATION OF CONSTANCY OF PERFORMANCE, CLASSIFICATION AND MARKING |
| DIN EN 14891:2015-02 (Draft) | LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, ASSESSMENT AND VERIFICATION OF CONSTANCY OF PERFORMANCE, CLASSIFICATION AND MARKING |
| BS EN 12839:2012 | Precast concrete products. Elements for fences |
| BS EN 12618-3:2004 | Products and systems for the protection and repair of concrete structures. Test methods Determination of the adhesion of injection products, with or without thermal cycling. Slant shear method |
| I.S. EN 1168:2005 | PRECAST CONCRETE PRODUCTS - HOLLOW CORE SLABS |
| I.S. EN 13877-1:2013 | CONCRETE PAVEMENTS - PART 1: MATERIALS |
| DIN EN 12390-3:2009-07 | TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
| I.S. EN 13877-2:2013 | CONCRETE PAVEMENTS - PART 2: FUNCTIONAL REQUIREMENTS FOR CONCRETE PAVEMENTS |
| I.S. EN 12390-6:2009 | TESTING HARDENED CONCRETE - PART 6: TENSILE SPLITTING STRENGTH OF TEST SPECIMENS |
| DIN EN 12390-6:2010-09 | Testing hardened concrete - Part 6: Tensile splitting strength of test specimens |
| I.S. EN 480-1:2014 | ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 1: REFERENCE CONCRETE AND REFERENCE MORTAR FOR TESTING |
| I.S. EN 14651:2005 | TEST METHOD FOR METALLIC FIBERED CONCRETE - MEASURING THE FLEXURAL TENSILE STRENGTH (LIMIT OF PROPORTIONALITY (LOP), RESIDUAL) |
| I.S. EN 1354:2005 | DETERMINATION OF COMPRESSIVE STRENGTH OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE |
| I.S. EN 14891:2017 | LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, ASSESSMENT AND VERIFICATION OF CONSTANCY OF PERFORMANCE, CLASSIFICATION AND MARKING |
| DIN EN 206-1:2001-07 | CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| UNI EN ISO 21809-5 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS |
| PREN 1504-10 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| I.S. CEN TR 15177:2006 | TESTING THE FREEZE-THAW RESISTANCE OF CONCRETE - INTERNAL STRUCTURAL DAMAGE |
| I.S. EN 206-1:2002 | CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY (INCLUDING IRISH NATIONAL ANNEX) |
| XP CEN/TS 12390-11 : 2010 XP | TESTING HARDENED CONCRETE - PART 11: DETERMINATION OF THE CHLORIDE RESISTANCE OF CONCRETE, UNIDIRECTIONAL DIFFUSION |
| 15/30327977 DC : 0 | BS EN 1504-10 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| 02/103093 DC : DRAFT APR 2002 | BS 12390-9 - TESTING HARDENED CONCRETE - PART 9: FREEZE-THAW RESISTANCE - SCALING |
| DD CEN/TS 12390-11:2010 | Testing hardened concrete Determination of the chloride resistance of concrete, unidirectional diffusion |
| DIN EN 480-15:2013-06 | Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures |
| DIN 4093:2015-11 | Design of strengthened soil - Set up by means of jet grouting, deep mixing or grouting |
| UNI EN 13369 : 2013 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| DD CEN/TS 12390-10:2007 | Testing hardened concrete Determination of the relative carbonation resistance of concrete |
| PREN 14891 : DRAFT 2014 | LIQUID APPLIED WATER IMPERMEABLE PRODUCTS FOR USE BENEATH CERAMIC TILING BONDED WITH ADHESIVES - REQUIREMENTS, TEST METHODS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION |
| 03/314375 DC : DRAFT DEC 2003 | BS EN 14844 - PRECAST CONCRETE BOX CULVERTS |
| ONORM EN 12390-8 : 2009 | TESTING HARDENED CONCRETE - PART 8: DEPTH OF PENETRATION OF WATER UNDER PRESSURE |
| DIN EN 14944-3:2015-06 (Draft) | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 3: MIGRATION OF SUBSTANCES FROM FACTORY-MADE CEMENTITIOUS PRODUCTS |
| I.S. EN 12390-11:2015 | TESTING HARDENED CONCRETE - PART 11: DETERMINATION OF THE CHLORIDE RESISTANCE OF CONCRETE, UNIDIRECTIONAL DIFFUSION |
| DIN EN 13369:2013-08 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| UNE-EN 480-15:2013 | Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures |
| I.S. EN 13369:2013 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| PREN 12390-6 : DRAFT 2009 | TESTING HARDENED CONCRETE - PART 6: TENSILE SPLITTING STRENGTH OF TEST SPECIMENS |
| I.S. EN 12390-3:2009 | TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
| DIN EN 1354:2005-09 | Determination of compressive strength of lightweight aggregate concrete with open structure; German version EN 1354:2005 |
| DIN EN 14488-5:2006-08 | Testing sprayed concrete - Part 5: Determination of energy absorption capacity of fibre reinforced slab specimens |
| DIN EN 1168:2011-12 | Precast concrete products - Hollow core slabs (includes Amendment A3:2011) |
| DIN EN 480-1:2015-01 | Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing |
| DIN EN 12504-4 E : 2004 | TESTING CONCRETE IN STRUCTURES - PART 4: DETERMINATION OF ULTRASONIC PULSE VELOCITY |
| DIN EN 14651 E : 2007 | TEST METHOD FOR METALLIC FIBERED CONCRETE - MEASURING THE FLEXURAL TENSILE STRENGTH (LIMIT OF PROPORTIONALITY (LOP), RESIDUAL) |
| DIN EN 13791:2008-05 | ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS |
| BS EN 1354:2005 | Determination of compressive strength of lightweight aggregate concrete with open structure |
| UNE-EN 480-1:2015 | Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing |
| DIN EN 14944-3:2009-01 | Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementitious products |
| UNI EN 1168 : 2012 | PRECAST CONCRETE PRODUCTS - HOLLOW CORE SLABS |
| UNI EN 12839 : 2012 | PRECAST CONCRETE PRODUCTS - ELEMENTS FOR FENCES |
| UNI EN 480-1 : 2014 | ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 1: REFERENCE CONCRETE AND REFERENCE MORTAR FOR TESTING |
| UNI EN 13791 : 2008 | ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS |
| UNI EN 10080 : 2005 | STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - GENERAL |
| UNI EN 1504-10 : 2005 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS - REQUIREMENTS - QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| UNI EN 13877-1 : 2013 | CONCRETE PAVEMENTS - PART 1: MATERIALS |
| UNI EN 1881 : 2007 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - TESTING OF ANCHORING PRODUCTS BY THE PULL-OUT METHOD |
| UNI EN 12390-8 : 2009 | TESTING HARDENED CONCRETE - PART 8: DEPTH OF PENETRATION OF WATER UNDER PRESSURE |
| UNI EN 12390-6 : 2010 | TESTING HARDENED CONCRETE - PART 6: TENSILE SPLITTING STRENGTH OF TEST SPECIMENS |
| UNI EN 12390-3 : 2009 | TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
| UNI CEN/TR 16563 : 2013 | PRINCIPLES OF THE EQUIVALENT DURABILITY PROCEDURE |
| UNI EN 13877-2 : 2013 | CONCRETE PAVEMENTS - PART 2: FUNCTIONAL REQUIREMENTS FOR CONCRETE PAVEMENTS |
| DIN EN 12390-13:2014-06 | Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression |
| EN 206:2013+A1:2016 | Concrete - Specification, performance, production and conformity |
| PD CEN/TS 12390-9:2016 | Testing hardened concrete Freeze-thaw resistance with de-icing salts. Scaling |
| S.R. CEN TS 12390-11:2010 | TESTING HARDENED CONCRETE - PART 11: DETERMINATION OF THE CHLORIDE RESISTANCE OF CONCRETE, UNIDIRECTIONAL DIFFUSION |
| PREN 13369 : DRAFT 2017 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| I.S. EN 10080:2005 | STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - GENERAL |
| PD CEN/TR 16142:2011 | Concrete. A study of the characteristic leaching behaviour of hardened concrete for use in the natural environment |
| BS EN 12390-13:2013 | Testing hardened concrete Determination of secant modulus of elasticity in compression |
| PREN 12390-16 : DRAFT 2018 | TESTING HARDENED CONCRETE - PART 16: DETERMINATION OF THE SHRINKAGE OF CONCRETE |
| 12/30257889 DC : 0 | BS EN 206 - CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| PREN 12390-5 : DRAFT 2017 | TESTING HARDENED CONCRETE - PART 5: FLEXURAL STRENGTH OF TEST SPECIMENS |
| UNI EN 12390-13 : 2013 | TESTING HARDENED CONCRETE - PART 13: DETERMINATION OF SECANT MODULUS OF ELASTICITY IN COMPRESSION |
| PD CEN/TR 16563:2013 | Principles of the equivalent durability procedure |
| DIN EN 206:2014-07 | CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| UNE-EN 13369:2013 | Common rules for precast concrete products |
| UNE-EN ISO 21809-5:2018 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO 21809-5:2017) |
| UNI CEN/TR 15678 : 2008 | CONCRETE - RELEASE OF REGULATED DANGEROUS SUBSTANCES INTO SOIL, GROUNDWATER AND SURFACE WATER - TEST METHOD FOR NEW OR UNAPPROVED CONSTITUENTS OF CONCRETE AND FOR PRODUCTION CONCRETES |
| 04/30083253 DC : DRAFT MAY 2004 | EN 14944-1 - INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF FACTORY MADE CEMENTITIOUS PRODUCTS ON ORGANOLEPTIC PARAMETERS |
| 08/30160023 DC : DRAFT AUG 2008 | BS EN ISO 21809-5 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS |
| 16/30334711 DC : DRAFT JAN 2016 | BS EN 12390-15 - TESTING HARDENED CONCRETE - PART 15: ADIABATIC METHOD FOR THE DETERMINATION OF HEAT RELEASED BY CONCRETE DURING ITS HARDENING PROCESS |
| I.S. EN 12504-4:2004 | TESTING CONCRETE - PART 4: DETERMINATION OF ULTRASONIC PULSE VELOCITY |
| S.R. CEN/TS 12390-9:2016 | TESTING HARDENED CONCRETE - PART 9: FREEZE-THAW RESISTANCE WITH DE-ICING SALTS - SCALING |
| S.R. CWA 16221:2010 | VEHICLE SECURITY BARRIERS - PERFORMANCE REQUIREMENTS, TEST METHODS AND GUIDANCE ON APPLICATION |
| PREN 12390-3 : DRAFT 2017 | TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
| CEN/TS 12390-10:2007 | Testing hardened concrete - Part 10: Determination of the relative carbonation resistance of concrete |
| 17/30360096 DC : 0 | BS EN 12390-3 - TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
| EN ISO 21809-5:2017 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO 21809-5:2017) |
| EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works |
| I.S. CEN TS 12390-9:2006 | TESTING HARDENED CONCRETE - PART 9: FREEZE-THAW RESISTANCE - SCALING |
| I.S. EN 12839:2012 | PRECAST CONCRETE PRODUCTS - ELEMENTS FOR FENCES |
| DIN EN 12390-5:2009-07 | TESTING HARDENED CONCRETE - PART 5: FLEXURAL STRENGTH OF TEST SPECIMENS |
| BS EN 12390-6:2000 | Testing hardened concrete Tensile splitting strength of test specimens |
| UNE-EN 13877-1:2013 | Concrete pavements - Part 1: Materials |
| BS EN 206-1:2000 | Concrete Specification, performance, production and conformity |
| BS EN 480-1:2014 | Admixtures for concrete, mortar and grout. Test methods Reference concrete and reference mortar for testing |
| BS EN 14488-5:2006 | Testing sprayed concrete Determination of energy absorption capacity of fibre reinforced slab specimens |
| BS EN 12390-5:2009 | Testing hardened concrete Flexural strength of test specimens |
| UNE-EN 12839:2012 | Precast concrete products - Elements for fences |
| BS EN 15184:2006 | Products and systems for the protection and repair of concrete structures. Test methods. Shear adhesion of coated steel to concrete (pull-out test) |
| BS EN 1008:2002 | Mixing water for concrete. Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete |
| BS EN 1881:2006 | Products and systems for the protection and repair of concrete structures. Test methods. Testing of anchoring products by the pull-out method |
| DIN EN 14944-1:2006-07 | Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of factory made cementitious products on organoleptic parameters |
| BS EN 12390-3:2009 | Testing hardened concrete Compressive strength of test specimens |
| BS EN 12504-4:2004 | Testing concrete Determination of ultrasonic pulse velocity |
| BS EN 13877-2:2013 | Concrete pavements Functional requirements for concrete pavements |
| CEN/TR 15678:2008 | Concrete - Release of regulated dangerous substances into soil, groundwater and surface water - Test method for new or unapproved constituents of concrete and for production concretes |
| EN 15184:2006 | Products and systems for the protection and repair of concrete structures - Test methods - Shear adhesion of coated steel to concrete (pull-out test) |
| UNI EN 12390-5 : 2009 | TESTING HARDENED CONCRETE - PART 5: FLEXURAL STRENGTH OF TEST SPECIMENS |
| EN 14891:2017 | Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, assessment and verification of constancy of performance, classification and marking |
| EN 1881:2006 | Products and systems for the protection and repair of concrete structures - Test methods - Testing of anchoring products by the pull-out method |
| EN 13877-1:2013 | Concrete pavements - Part 1: Materials |
| EN 14944-3:2007 | Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementititous products |
| EN 480-15:2013 | Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures |
| EN 13877-2:2013 | Concrete pavements - Part 2: Functional requirements for concrete pavements |
| EN 14651:2005+A1:2007 | Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual) |
| EN 14944-1:2006 | Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of factory made cementitious products on organoleptic parameters |
| EN 206-1:2000/A2:2005 | CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| EN 14488-5:2006 | Testing sprayed concrete - Part 5: Determination of energy absorption capacity of fibre reinforced slab specimens |
| EN 1825-1:2004/AC:2006 | GREASE SEPARATORS - PART 1: PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL |
| EN 480-1:2014 | Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing |
| EN 13791:2007 | Assessment of in-situ compressive strength in structures and precast concrete components |
| PREN 14944-3 : DRAFT 2015 | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 3: MIGRATION OF SUBSTANCES FROM FACTORY-MADE CEMENTITIOUS PRODUCTS |
| PREN 14944-1 : DRAFT 2015 | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF MIGRATION FROM FACTORY MADE CEMENTITIOUS PRODUCTS ON THE ORGANOLEPTIC PARAMETERS |
| CEN/TR 16142:2011 | Concrete - A study of the characteristic leaching behaviour of hardened concrete for use in the natural environment |
| BS ISO 13007-5:2015 | Ceramic tiles. Grouts and adhesives Requirements, test methods, evaluation of conformity, classification and designation of liquid-applied waterproofing membranes for use beneath ceramic tiling bonded with adhesives |
| PREN 12716 : DRAFT 2017 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - JET GROUTING |
| 11/30251426 DC : DRAFT OCT 2011 | BS EN 480-15 - ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 15: REFERENCE CONCRETE AND METHOD FOR TESTING VISCOSITY MODIFYING ADMIXTURES |
| 17/30349922 DC : 0 | BS EN 13791 - ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS |
| 07/30163668 DC : 0 | BS EN 12839 - PRECAST CONCRETE PRODUCTS - ELEMENTS OF FENCES |
| PREN 13791 : DRAFT 2017 | ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS |
| I.S. EN 12390-5:2009 | TESTING HARDENED CONCRETE - PART 5: FLEXURAL STRENGTH OF TEST SPECIMENS |
| DD CEN/TS 12390-9:2006 | Testing hardened concrete Freeze-thaw resistance. Scaling |
| BS EN 14944-3:2007 | Influence of cementitious products on water intended for human consumption. Test methods Migration of substances from factory-made cementitious products |
| 09/30200044 DC : 0 | BS EN 12390-6 - TESTING HARDENED CONCRETE - PART 6: TENSILE SPLITTING STRENGTH OF TEST SPECIMENS |
| DIN EN 12390-13:2014-06 | TESTING HARDENED CONCRETE - PART 13: DETERMINATION OF SECANT MODULUS OF ELASTICITY IN COMPRESSION |
| I.S. EN 13369:2018 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| I.S. EN 12390-13:2013 | TESTING HARDENED CONCRETE - PART 13: DETERMINATION OF SECANT MODULUS OF ELASTICITY IN COMPRESSION |
| PREN 12390-10 : DRAFT 2017 | TESTING HARDENED CONCRETE - PART 10: DETERMINATION OF THE CARBONATION RESISTANCE OF CONCRETE AT ATMOSPHERIC LEVELS OF CARBON DIOXIDE |
| 18/30371537 DC : DRAFT APR 2018 | BS EN 12390-16 - TESTING HARDENED CONCRETE - PART 16: DETERMINATION OF THE SHRINKAGE OF CONCRETE |
| 17/30360075 DC : 0 | BS EN 12390-8 - TESTING HARDENED CONCRETE - PART 8: DEPTH OF PENETRATION OF WATER UNDER PRESSURE |
| 15/30317324 DC : 0 | BS EN 14944-3 - INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 3: MIGRATION OF SUBSTANCES FROM FACTORY-MADE CEMENTITIOUS PRODUCTS |
| 18/30371540 DC : DRAFT APR 2018 | BS EN 12390-17 - TESTING HARDENED CONCRETE - PART 17: DETERMINATION OF CREEP OF CONCRETE IN COMPRESSION |
| XP CEN/TS 1992-4-1 : 2009 XP | DESIGN FOR FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL |
| I.S. EN 14944-3:2007 | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 3: MIGRATION OF SUBSTANCES FROM FACTORY-MADE CEMENTITITOUS PRODUCTS |
| 17/30354260 DC : 0 | BS EN 12716 - EXECUTION OF SPECIAL GEOTECHNICAL WORKS - JET GROUTING |
| UNI CEN/TS 12390-11 : 2010 | TESTING HARDENED CONCRETE - PART 11: DETERMINATION OF THE CHLORIDE RESISTANCE OF CONCRETE, UNIDIRECTIONAL DIFFUSION |
| S.R. CEN/TR 16142:2011 | CONCRETE - A STUDY OF THE CHARACTERISTIC LEACHING BEHAVIOUR OF HARDENED CONCRETE FOR USE IN THE NATURAL ENVIRONMENT |
| ISO 21809-5:2017 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 5: External concrete coatings |
| EN 13369:2018 | Common rules for precast concrete products |
| DIN EN 12390-8:2009-07 | TESTING HARDENED CONCRETE - PART 8: DEPTH OF PENETRATION OF WATER UNDER PRESSURE |
| I.S. EN 1504-10:2017 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| ISO 13007-5:2015 | Ceramic tiles Grouts and adhesives Part 5: Requirements, test methods, evaluation of conformity, classification and designation of liquid-applied waterproofing membranes for use beneath ceramic tiling bonded with adhesives |
| DIN EN 13877-2:2013-06 | CONCRETE PAVEMENTS - PART 2: FUNCTIONAL REQUIREMENTS FOR CONCRETE PAVEMENTS |
| DIN EN 13877-1:2013-06 | CONCRETE PAVEMENTS - PART 1: MATERIALS |
| DIN EN 14944-1:2015-06 (Draft) | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF FACTORY MADE CEMENTITIOUS PRODUCTS ON ORGANOLEPTIC PARAMETERS |
| BS EN 14891:2017 | Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives. Requirements, test methods, assessment and verification of constancy of performance, classification and marking |
| BS EN 1168 : 2005 | PRECAST CONCRETE PRODUCTS - HOLLOW CORE SLABS |
| BS EN 14944-1:2006 | Influence of cementitious products on water intended for human consumption. Test methods Influence of factory made cementitious products on organoleptic parameters |
| BS EN 1825-1:2004 | Grease separators Principles of design, performance and testing, marking and quality control |
| BS EN 14651 : 2005 | TEST METHOD FOR METALLIC FIBRE CONCRETE - MEASURING THE FLEXURAL TENSILE STRENGTH (LIMIT OF PROPORTIONALITY (LOP), RESIDUAL) |
| EN 10080:2005 | Steel for the reinforcement of concrete - Weldable reinforcing steel - General |
| EN 12618-3:2004 | Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of the adhesion of injection products, with or without thermal cycling - Slant shear method |
| EN 1008:2002 | Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete |
| CEN/TS 12390-11:2010 | Testing hardened concrete - Part 11: Determination of the chloride resistance of concrete, unidirectional diffusion |
| EN 12390-6:2009 | Testing hardened concrete - Part 6: Tensile splitting strength of test specimens |
| EN 12839:2012 | Precast concrete products - Elements for fences |
| DIN EN 15184:2006-11 | Products and systems for the protection and repair of concrete structures - Test methods - Shear adhesion of coated steel to concrete (pull-out test) |
| DIN EN 12618-3:2004-11 | Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of the adhesion of injection products, with or without thermal cycling - Slant shear method |
| DIN EN 1825-1:2004-12 | Grease separators - Part 1: Principles of design, performance and testing, marking and quality control; German version EN 1825-1:2004 |
| DIN EN 10080:2005-08 | STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - GENERAL |
| ONORM EN 14944-1 : 2006 | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF FACTORY MADE CEMENTITIOUS PRODUCTS ON ORGANOLEPTIC PARAMETERS |
| ONORM EN 14944-3 : 2008 | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 3: MIGRATION OF SUBSTANCES FROM FACTORY-MADE CEMENTITITOUS PRODUCTS |
| UNE-EN 1168:2006 | Precast concrete products - Hollow core slabs |
| EN 12390-1:2012 | TESTING HARDENED CONCRETE - PART 1: SHAPE, DIMENSIONS AND OTHER REQUIREMENTS FOR SPECIMENS AND MOULDS |
| EN 12350-1:2009 | Testing fresh concrete - Part 1: Sampling |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.