• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 12664:2001

Current
Current

The latest, up-to-date edition.

Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance
Published date

24-01-2001

Foreword
Introduction
1 Scope
2 Normative references
3 Definitions, symbols and units
4 Principle
5 Apparatus
6 Test specimens
7 Testing procedure
8 Calculations
9 Test report
Annex A (normative) Limitations to the implementation of
        the measurement principles and on measurable
        properties
Annex B (normative) Limits for equipment performance
        and test conditions - Guarded hot plate
Annex C (normative) Limits for equipment performance
        and test conditions - Heat flow meter
Annex D (normative) Equipment design
Annex E (normative) Procedures related to measurements
        at moisture equilibrium
Annex F (informative) Conditioning to a specified moisture
        content in a specified atmosphere
Annex G (informative) Estimation of effects of condensation
Bibliography

This standard specifies principles and testing procedures for determining, by means of the guarded hot plate or heat flow meter methods, the thermal resistance of test specimens either in the dry state or conditioned to equilibrium with moist air, having a thermal resistance of not less than 0,1 m2.K/W and a (hygro)thermal transmissivity or thermal conductivity up to 2,0 W/(m.K). (It is expected that the thermal resistance of most masonry specimen will be less than 0,5 m2.K/W).

Committee
CEN/TC 89
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

Standards Relationship
UNE-EN 12664:2002 Identical
SN EN 12664 : 2001 Identical
UNI EN 12664 : 2002 Identical
I.S. EN 12664:2001 Identical
DIN EN 12664:2001-05 Identical
PN EN 12664 : 2002 Identical
BS EN 12664:2001 Identical
NS EN 12664 : 1ED 2001 Identical
NEN EN 12664 : 2001 Identical
NF EN 12664 : 2001 Identical
NBN EN 12664 : 2001 Identical

DIN EN 15285:2008-09 Agglomerated stone - Modular tiles for flooring and stairs (internal and external)
ISO 14486:2012 Laminate floor coverings — Specification
PD CEN/TS 15548-1:2014 Thermal insulation products for building equipment and industrial installations. Determination of thermal resistance by means of the guarded hot plate method Measurements at elevated temperatures from 100 °C to 850 °C
I.S. EN 12104:2000 RESILIENT FLOOR COVERINGS - CORK FLOOR TILES - SPECIFICATION
EN ISO 18797-1:2017 Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coatings and linings - Part 1: Elastomeric coating systems-polychloroprene or EPDM (ISO 18797-1:2016)
11/30251988 DC : 0 BS EN 14190 - GYPSUM PLASTERBOARD PRODUCTS FROM PROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS
17/30354239 DC : 0 BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS
DIN EN 15283-2:2009-12 Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards (includes Amendment A1:2009)
BS EN 15285:2008 Agglomerated stone. Modular tiles for flooring and stairs (internal and external)
PREN 13279-1 : DRAFT 2017 GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS
BS ISO 14486:2012 Laminate floor coverings. Specification
06/30155785 DC : 0 BS EN 15564 - PRECAST CONCRETE PRODUCTS - RESIN BOUND CONCRETE - REQUIREMENTS AND TEST METHODS
08/30171552 DC : DRAFT JAN 2008 BS EN 13279-1 - GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS
DIN EN 15037-3:2011-07 Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks (includes Amendment A1:2011)
07/30166420 DC : DRAFT AUG 2007 BS EN 1520 - PREFABRICATED REINFORCED COMPONENTS OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE
DIN EN 15435:2008-10 PRECAST CONCRETE PRODUCTS - NORMAL WEIGHT AND LIGHTWEIGHT CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE
10/30228898 DC : 0 BS EN 1745 - MASONRY AND MASONRY PRODUCTS - METHODS FOR DETERMINING THERMAL PROPERTIES
PREN 12104 : DRAFT 2017 RESILIENT FLOOR COVERINGS - CORK FLOOR TILES - SPECIFICATION
15/30278562 DC : 0 BS ISO 18797-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS - POLYCHLOROPRENE OR EPDM
PREN 14342 : DRAFT 2011 WOOD FLOORING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
I.S. EN ISO 18797-1:2017 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS-POLYCHLOROPRENE OR EPDM (ISO 18797-1:2016)
I.S. CEN TR 14613:2004 THERMAL PERFORMANCE OF BUILDING MATERIALS AND COMPONENTS - PRINCIPLES FOR THE DETERMINATION OF THERMAL PROPERTIES OF MOIST MATERIALS AND COMPONENTS
I.S. EN 16012:2012 THERMAL INSULATION FOR BUILDINGS - REFLECTIVE INSULATION PRODUCTS - DETERMINATION OF THE DECLARED THERMAL PERFORMANCE
PREN 12602 : DRAFT 2015 PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE
I.S. EN 14915:2013 SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
EN 14915:2013+A1:2017 Solid wood panelling and cladding - Characteristics, requirements and marking
UNE-EN ISO 10077-1:2010 Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General
DIN EN 12412-4:2003-11 Thermal performance of windows, doors and shutters - Determination of thermal transmittance by hot box method - Part 4: Roller shutter boxes; German version EN 12412-4:2003
DIN EN 12412-2:2003-11 Thermal performance of windows, doors and shutters - Determination of thermal transmittance by hot box method - Part 2: Frames; German version EN 12412-2:2003
DIN EN 14964 E : 2007 RIGID UNDERLAYS FOR DISCONTINUOUS ROOFING - DEFINITIONS AND CHARACTERISTICS
DIN EN 14342 E : 2013 WOOD FLOORING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
DIN EN ISO 10456:2010-05 Building materials and products - Hygrothermal properties - Tabulated design values and procedures for determining declared and design thermal values (ISO 10456:2007 + Cor. 1:2009); German version EN ISO 10456:2007 + AC:2009
BS EN 14190:2014 Gypsum board products from reprocessing. Definitions, requirements and test methods
BS EN 438-7:2005 High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Compact laminate and HPL composite panels for internal and external wall and ceiling finishes
BS EN 520 : 2004 GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
BS EN 14964:2006 Rigid underlays for discontinuous roofing. Definitions and characteristics
CEN/TS 16354:2013 Laminate floor coverings - Underlays - Specification, requirements and test methods
EN ISO 10456:2007/AC:2009 BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES
DIN EN 13813:2003-01 SCREED MATERIAL AND FLOOR SCREEDS - SCREED MATERIALS - PROPERTIES AND REQUIREMENTS
EN 12602:2016 Prefabricated reinforced components of autoclaved aerated concrete
EN 12667:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
EN 12412-4:2003 Thermal performance of windows, doors and shutters - Determination of thermal transmittance by hot box method - Part 4: Roller shutter boxes
EN 12104:2000 Resilient floor coverings - Cork floor tiles - Specification
EN 12103:1999 Resilient floor coverings - Agglomerated cork underlays - Specification
CEN/TS 15679:2007 Thermal Modified Timber - Definitions and characteristics
CEN/TR 14613:2003 Thermal performance of building materials and components - Principles for the determination of thermal properties of moist material and components
DIN EN 13915:2017-09 PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS
EN 13055-2:2004 Lightweight aggregates - Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications
EN 12412-2:2003 Thermal performance of windows, doors and shutters - Determination of thermal transmittance by hot box method - Part 2: Frames
EN 13213 : 2001 HOLLOW FLOORS
I.S. EN 15026:2007 HYGROTHERMAL PERFORMANCE OF BUILDING COMPONENTS AND BUILDING ELEMENTS - ASSESSMENT OF MOISTURE TRANSFER BY NUMERICAL SIMULATION
PREN 14915 : DRAFT 2013 SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
BS EN 15283-1 : 2008 GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT
11/30249117 DC : 0 BS EN 14342 - WOOD FLOORING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
I.S. EN 13055-2:2004 LIGHTWEIGHT AGGREGATES - PART 2: LIGHTWEIGHT AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS
DIN EN 16012:2015-05 Thermal insulation for buildings - Reflective insulation products - Determination of the declared thermal performance (includes Amendment A1:2015)
08/30178840 DC : DRAFT AUG 2008 BS EN 15037-3 - PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS
BS ISO 18797-1 : 2016 COR 2017 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMSPOLYCHLOROPRENE OR EPDM
DIN EN 15283-1:2009-12 Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement (includes Amendment A1:2009)
DIN EN 15564 E : 2009 PRECAST CONCRETE PRODUCTS - RESIN BOUND CONCRETE - REQUIREMENTS AND TEST METHODS
15/30323246 DC : 0 BS EN ISO 10077-2 - THERMAL PERFORMANCE OF WINDOWS, DOORS AND SHUTTERS - CALCULATION OF THERMAL TRANSMITTANCE - PART 2: NUMERICAL METHOD FOR FRAMES
UNI EN 15283-1 : 2009 GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT
12/30256925 DC : 0 BS EN 13055 - LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR, GROUT, BITUMINOUS MIXTURES, SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS
DD CEN/TS 15548-1:2011 Thermal insulation products for building equipment and industrial installations. Determination of thermal resistance by means of the guarded hot plate method Measurements at elevated temperatures from 100 °C to 850 °C
10/30218985 DC : DRAFT JUNE 2010 BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS
11/30241970 DC : 0 DD CEN/TS 15548 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - DETERMINATION OF THERMAL RESISTANCE BY MEANS OF THE GUARDED HOT PLATE METHOD - PART 1: MEASUREMENTS AT ELEVATED TEMPERATURES FROM 100 DEGREES C TO 850 DEGREES C
02/121752 DC : DRAFT APR 2002 PREN 438-7 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 7: COMPACT LAMINATE AND HPL COMPOSITE PANELS FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES
01/101336 DC : DRAFT JAN 2001 PREN 13964 - SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
PREN ISO 10077-2 : DRAFT 2009 THERMAL PERFORMANCE OF WINDOWS, DOORS AND SHUTTERS - CALCULATION OF THERMAL TRANSMITTANCE - PART 2: NUMERICAL METHOD FOR FRAMES
PRCEN/TS 15548-1 : DRAFT 2011 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - DETERMINATION OF THERMAL RESISTANCE BY MEANS OF THE GUARDED HOT PLATE METHOD - PART 1: MEASUREMENTS AT ELEVATED TEMPERATURES FROM 100 DEGREES C TO 850 DEGREES C
PREN 14374 : DRAFT 2016 TIMBER STRUCTURES - LAMINATED VENEER LUMBER (LVL) - REQUIREMENTS
UNI EN 15037-3 : 2011 PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS
PREN 13813 : DRAFT 2017 SCREED MATERIAL AND FLOOR SCREEDS - SCREED MATERIAL - PROPERTIES AND REQUIREMENTS
BS EN 15037-3 : 2009 PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS
I.S. EN 13055:2016 LIGHTWEIGHT AGGREGATES
BS EN 13369:2013 Common rules for precast concrete products
I.S. EN 14041:2018 RESILIENT, TEXTILE, LAMINATE AND MODULAR MULTILAYER FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS
PREN 16354 : DRAFT 2016 LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS
I.S. EN 15283-2:2008 GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS
16/30333219 DC : 0 BS EN 16354 - LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS
UNI EN 15435 : 2008 PRECAST CONCRETE PRODUCTS - NORMAL WEIGHT AND LIGHTWEIGHT CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE
UNE-EN 16012:2013 Thermal insulation for buildings - Reflective insulation products - Determination of the declared thermal performance
EN ISO 10077-2:2017 Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames (ISO 10077-2:2017)
DIN EN 13279-1:2008-11 GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS
DIN EN 1520:2011-06 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
DIN EN 1745:2012-07 MASONRY AND MASONRY PRODUCTS - METHODS FOR DETERMINING THERMAL PROPERTIES
DIN EN 13986:2015-06 WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
DIN EN 14964:2007-01 RIGID UNDERLAYS FOR DISCONTINUOUS ROOFING - DEFINITIONS AND CHARACTERISTICS
DIN EN 14342:2013-09 Wood flooring - Characteristics, evaluation of conformity and marking
UNE-EN 1745:2013 Masonry and masonry products - Methods for determining thermal properties
BS EN 13055-2:2004 Lightweight aggregates Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications
ISO 10456:2007 Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values
I.S. EN ISO 10456:2007 BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES
I.S. EN 1520:2011 PREFABRICATED REINFORCED COMPONENTS OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE WITH STRUCTURAL OR NON-STRUCTURAL REINFORCEMENT
I.S. EN 13915:2017 PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. EN 13986:2004 WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
I.S. EN 520:2005 GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. EN 14342:2013 WOOD FLOORING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
I.S. EN 13964:2014 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
I.S. EN 14190:2014 GYPSUM BOARD PRODUCTS FROM REPROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNE-EN 13915:2018 Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods
BS EN 15564:2008 Precast concrete products. Resin bound concrete. Requirements and test methods
ISO 10077-2:2017 Thermal performance of windows, doors and shutters — Calculation of thermal transmittance — Part 2: Numerical method for frames
BS EN 13055:2016 Lightweight aggregates
PD CEN/TR 14613:2003 Thermal performance of building materials and components. Principles for the determination of thermal properties of moist materials andcomponent s
11/30244187 DC : 0 BS EN 14041 - RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS
ISO 3813:2004 Resilient floor coverings Cork floor tiles Specification
UNI EN 15283-2 : 2009 GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS
DIN EN 15498:2008-08 PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE
UNI EN 15564 : 2009 PRECAST CONCRETE PRODUCTS - RESIN BOUND CONCRETE - REQUIREMENTS AND TEST METHODS
I.S. EN 15283-1:2008 GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT
UNI EN 13369 : 2013 COMMON RULES FOR PRECAST CONCRETE PRODUCTS
UNE-EN ISO 10077-2:2012 Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames (ISO 10077-2:2012)
DD CEN/TS 15679:2007 Thermal modified timber. Definitions and characteristics
02/124567 DC : DRAFT DEC 2002 BS ISO 3813 - RESILIENT FLOOR COVERINGS - CORK FLOOR TILES - SPECIFICATION
UNI CEN/TS 16354 : 2014 LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS
BS EN 15498:2008 Precast concrete products. Wood-chip concrete shuttering blocks. Product properties and performance
PREN 438-7 : DRAFT 2014 HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 7: COMPACT LAMINATE AND HPL COMPOSITE PANELS FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES
UNE-CEN/TS 15679:2009 EX Thermal Modified Timber - Definitions and characteristics
PREN 14190 : DRAFT 2011 GYPSUM PLASTERBOARD PRODUCTS FROM PROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 13369:2013-08 COMMON RULES FOR PRECAST CONCRETE PRODUCTS
I.S. EN 13369:2013 COMMON RULES FOR PRECAST CONCRETE PRODUCTS
UNI EN 15498 : 2008 PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE
ISO 18797-1:2016 Petroleum, petrochemical and natural gas industries — External corrosion protection of risers by coatings and linings — Part 1: Elastomeric coating systems-polychloroprene or EPDM
PREN 13915 : DRAFT 2016 PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNI EN 15026 : 2008 HYGROTHERMAL PERFORMANCE OF BUILDING COMPONENTS AND BUILDING ELEMENTS - ASSESSMENT OF MOISTURE TRANSFER BY NUMERICAL SIMULATION
I.S. EN 15435:2008 PRECAST CONCRETE PRODUCTS - NORMAL WEIGHT AND LIGHTWEIGHT CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE
I.S. EN 15285:2008 AGGLOMERATED STONE - MODULAR TILES FOR FLOORING AND STAIRS (INTERNAL AND EXTERNAL)
I.S. EN 15498:2008 PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE
DIN EN 438-7:2005-04 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes; German version EN 438-7:2005
DIN EN 13915:2016-02 (Draft) PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 13964:2014-08 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
UNE-EN ISO 10456:2012 Building materials and products - Hygrothermal properties -Tabulated design values and procedures for determining declared and design thermal values (ISO 10456:2007)
BS EN 1520:2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
BS EN 13213:2001 Hollow floors
BS EN 12104:2000 Resilient floor coverings. Cork floor tiles. Specification
EN 14964:2006 Rigid underlays for discontinuous roofing - Definitions and characteristics
EN 13986:2004 Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
I.S. EN 1745:2012 MASONRY AND MASONRY PRODUCTS - METHODS FOR DETERMINING THERMAL PROPERTIES
EN 1745:2012 Masonry and masonry products - Methods for determining thermal properties
EN 13986:2004+A1:2015 Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
EN 15283-1:2008+A1:2009 Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement
EN 13964:2014 Suspended ceilings - Requirements and test methods
UNI EN 14342 : 2013 WOOD FLOORING AND PARQUET - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
UNI EN 520 : 2009 GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNI EN 1520 : 2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non- structural reinforcement
UNI EN 14190 : 2014 GYPSUM BOARD PRODUCTS FROM REPROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNI EN 13964 : 2014 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
UNI EN ISO 10456 : 2008 BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES
UNI EN 13279-1 : 2008 GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS
UNI CEN/TS 15548-1 : 2014 Thermal insulation products for building equipment and industrial installations - Determination of thermal resistance by means of the guarded hot plate method - Part 1: Measurements at elevated temperatures from 100 °C to 850 °C<br>
DIN EN 15498 E : 2008 PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE
PREN 13369 : DRAFT 2017 COMMON RULES FOR PRECAST CONCRETE PRODUCTS
06/30153920 DC : 0 BS EN 15548-1 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - DETERMINATION OF THERMAL RESISTANCE BY MEANS OF THE GUARDED HOT PLATE METHOD - PART 1: MEASUREMENTS AT ELEVATED TEMPERATURES FROM 100 DEGREE C TO 850 DEGREE C
DIN EN 15285 E : 2008 AGGLOMERATED STONE - MODULAR TILES FOR FLOORING AND STAIRS (INTERNAL AND EXTERNAL)
BS EN 15435:2008 Precast concrete products. Normal weight and lightweight concrete shuttering blocks. Product properties and performance
I.S. EN ISO 10077-1:2017 THERMAL PERFORMANCE OF WINDOWS, DOORS AND SHUTTERS - CALCULATION OF THERMAL TRANSMITTANCE - PART 1: GENERAL (ISO 10077-1:2017)
S.R. CEN/TS 15548-1:2014 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - DETERMINATION OF THERMAL RESISTANCE BY MEANS OF THE GUARDED HOT PLATE METHOD - PART 1: MEASUREMENTS AT ELEVATED TEMPERATURES FROM 100 DEGREES C TO 850 DEGREES C
00/107014 DC : DRAFT OCT 2000 PREN 520 - GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNI CEN/TS 15679 : 2008 THERMAL MODIFIED TIMBER - DEFINITIONS AND CHARACTERISTICS
17/30357433 DC BS EN 13279-1. Gypsum binders and gypsum plasters. Part 1. Definitions and requirements
16/30340580 DC : 0 BS EN 17009 - FLOORING OF LIGNIFIED MATERIALS OTHER THAN WOOD - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
BS EN ISO 10077-2:2017 Thermal performance of windows, doors and shutters. Calculation of thermal transmittance Numerical method for frames
I.S. EN ISO 10077-2:2017 THERMAL PERFORMANCE OF WINDOWS, DOORS AND SHUTTERS - CALCULATION OF THERMAL TRANSMITTANCE - PART 2: NUMERICAL METHOD FOR FRAMES (ISO 10077-2:2017)
14/30303797 DC : 0 BS EN 438-7 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 7: COMPACT LAMINATE AND HPL COMPOSITE PANELS FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES
17/30359856 DC : 0 BS EN 12104 - RESILIENT FLOOR COVERINGS - CORK FLOOR TILES - SPECIFICATION
I.S. EN 15564:2008 PRECAST CONCRETE PRODUCTS - RESIN BOUND CONCRETE - REQUIREMENTS AND TEST METHODS
PREN 14041 : DRAFT 2016 RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS
UNE-EN 12602:2011 Prefabricated reinforced components of autoclaved aerated concrete
I.S. EN 13279-1:2008 GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS
DIN EN 14915 E : 2013 SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, REQUIREMENTS AND MARKING
DIN EN 15026 E : 2007 HYGROTHERMAL PERFORMANCE OF BUILDING COMPONENTS AND BUILDING ELEMENTS - ASSESSMENT OF MOISTURE TRANSFER BY NUMERICAL SIMULATION
DIN EN 14190:2014-09 Gypsum board products from reprocessing - Definitions, requirements and test methods
DIN EN 14474 E : 2005 PRECAST CONCRETE PRODUCTS - CONCRETE WITH WOOD CHIPS AS AGGREGATE - REQUIREMENTS AND TEST METHODS
BS EN 15026:2007 Hygrothermal performance of building components and building elements. Assessment of moisture transfer by numerical simulation
BS EN 13915:2017 Prefabricated gypsum plasterboard panels with a cellular paperboard core. Definitions, requirements and test methods
BS EN 14474:2004 Precast concrete products. Concrete with wood-chips as aggregate. Requirements and test methods
BS EN 1745:2012 Masonry and masonry products. Methods for determining thermal properties
UNE-EN 14342:2013 Wood flooring and parquet - Characteristics, evaluation of conformity and marking
BS EN 14342:2013 Wood flooring and parquet. Characteristics, evaluation of conformity and marking
UNE-EN 14190:2014 Gypsum board products from reprocessing - Definitions, requirements and test methods
BS EN 13813:2002 Screed material and floor screeds. Screed material. Properties and requirements
BS EN 13279-1:2008 Gypsum binders and gypsum plasters Definitions and requirements
UNE-EN 520:2005 Gypsum plasterboards - Definitions, requirements and test methods
UNE-EN 15037-3:2010 Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks
BS EN ISO 10456:2007 Building materials and products. Hygrothermal properties. Tabulated design values and procedures for determining declared and design thermal values
UNE-EN 13986:2006 Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
EN 14190:2014 Gypsum board products from reprocessing - Definitions, requirements and test methods
EN ISO 10077-1:2017 Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General (ISO 10077-1:2017, Corrected version 2020-02)
EN 15026:2007 Hygrothermal performance of building components and building elements - Assessment of moisture transfer by numerical simulation
EN 520:2004+A1:2009 Gypsum plasterboards - Definitions, requirements and test methods
EN 15498:2008 Precast concrete products - Wood-chip concrete shuttering blocks - Product properties and performance
EN 15283-2:2008+A1:2009 Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards
EN 14474:2004 Precast concrete products - Concrete with wood-chips as aggregate - Requirements and test methods
EN 13915:2017 Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods
EN 1520:2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
EN 15435:2008 Precast concrete products - Normal weight and lightweight concrete shuttering blocks - Product properties and performance
EN 15037-3:2009+A1:2011 Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks
EN 15285:2008/AC:2008 AGGLOMERATED STONE - MODULAR TILES FOR FLOORING AND STAIRS (INTERNAL AND EXTERNAL)
EN 438-7:2005 (edition 2) High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes
EN 16012:2012+A1:2015 Thermal insulation for buildings - Reflective insulation products - Determination of the declared thermal performance
EN 14342:2013 Wood flooring and parquet - Characteristics, evaluation of conformity and marking
EN 15564:2008 Precast concrete products - Resin bound concrete - Requirements and test methods
EN 13813:2002 Screed material and floor screeds - Screed material - Properties and requirements
15/30328765 DC : 0 BS EN 12602 - PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE
DIN EN 15435 E : 2008 PRECAST CONCRETE PRODUCTS - NORMAL WEIGHT AND LIGHTWEIGHT CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE
DIN EN 15564:2009-05 PRECAST CONCRETE PRODUCTS - RESIN BOUND CONCRETE - REQUIREMENTS AND TEST METHODS
I.S. EN 438-7:2005 HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 7: COMPACT LAMINATE AND HPL COMPOSITE PANELS FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES
BS EN 16012 : 2012 THERMAL INSULATION FOR BUILDINGS - REFLECTIVE INSULATION PRODUCTS - DETERMINATION OF THE DECLARED THERMAL PERFORMANCE
BS EN 15283-2 : 2008 GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS
13/30217369 DC : 0 BS EN 13964 - SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
ISO 10077-1:2017 Thermal performance of windows, doors and shutters — Calculation of thermal transmittance — Part 1: General
16/30339855 DC : 0 BS EN 14041 - RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS
13/30268273 DC : 0 BS EN 14915 - SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
PD CEN/TS 16354:2013 Laminate floor coverings. Underlays. Specification, requirements and test methods
16/30332917 DC : 0 BS EN 13915 - PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNE-EN 13369:2013 Common rules for precast concrete products
09/30196505 DC : 0 BS EN ISO 10077-2 - THERMAL PERFORMANCE OF WINDOWS, DOORS AND SHUTTERS - CALCULATION OF THERMAL TRANSMITTANCE - PART 2: NUMERICAL METHOD FOR FRAMES
UNI EN 15285 : 2008 AGGLOMERATED STONE - MODULAR TILES FOR FLOORING AND STAIRS (INTERNAL AND EXTERNAL)
PREN 13964 : DRAFT 2013 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
BS EN 12602:2016 Prefabricated reinforced components of autoclaved aerated concrete
I.S. EN 15037-3:2009 PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS
I.S. EN 13369:2018 COMMON RULES FOR PRECAST CONCRETE PRODUCTS
S.R. CEN/TS 16354:2013 LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS
BS EN ISO 18797-1:2017 Petroleum, petrochemical and natural gas industries. External corrosion protection of risers by coatings and linings Elastomeric coating systems-polychloroprene or EPDM
BS EN ISO 10077-1:2017 Thermal performance of windows, doors and shutters. Calculation of thermal transmittance General
S.R. CEN/TS 15679:2007 THERMAL MODIFIED TIMBER - DEFINITIONS AND CHARACTERISTICS
EN 13369:2018 Common rules for precast concrete products
I.S. EN 12602:2016 PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE
DIN EN 520:2009-12 Gypsum plasterboards - Definitions, requirements and test methods (includes Amendment A1:2009)
UNE-EN 13964:2016 Suspended ceilings - Requirements and test methods
BS EN 13986 : 2004 WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
BS EN 12412-4:2003 Thermal performance of windows, doors and shutters. Determination of thermal transmittance by hot box method Roller shutter boxes
BS EN 12412-2:2003 Thermal performance of windows, doors and shutters. Determination of thermal transmittance by hot box method Frames
BS EN 14915 : 2013 SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
BS EN 12825:2001 Raised access floors
BS EN 12667:2001 Thermal performance of building materials and products. Determination of thermal resistance by means of guarded hot plate and heat flow meter methods. Products of high and medium thermal resistance
BS EN 13964:2014 Suspended ceilings. Requirements and test methods
CEN/TS 15548-1:2014 Thermal insulation products for building equipment and industrial installations - Determination of thermal resistance by means of the guarded hot plate method - Part 1: Measurements at elevated temperatures from 100 °C to 850 °C
EN 13055 : 2016 LIGHTWEIGHT AGGREGATES
DIN EN 14474:2005-03 Precast concrete products - Concrete with wood-chips as aggregate - Requirements and test methods; German version EN 14474:2004
DIN EN 13055-2:2004-09 LIGHTWEIGHT AGGREGATES - PART 2: LIGHTWEIGHT AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS
DIN EN 14915:2013-12 SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, REQUIREMENTS AND MARKING
EN 12825 : 2001 RAISED ACCESS FLOORS
DIN EN 15026:2007-07 Hygrothermal performance of building components and building elements - Assessment of moisture transfer by numerical simulation
EN 13279-1:2008 Gypsum binders and gypsum plasters - Part 1: Definitions and requirements
UNE-EN 14915:2013 Solid wood panelling and cladding - Characteristics, evaluation of conformity and marking
UNE-EN 13986:2006+A1:2015 Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking

EN 12667:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
EN 1946-3:1999 Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 3: Measurements by heat flow meter method
ISO 9346:2007 Hygrothermal performance of buildings and building materials — Physical quantities for mass transfer — Vocabulary
EN 12939:2000 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance
EN ISO 9346:2007 Hygrothermal performance of buildings and building materials - Physical quantities for mass transfer - Vocabulary (ISO 9346:2007)
ISO 10051:1996 Thermal insulation — Moisture effects on heat transfer — Determination of thermal transmissivity of a moist material
EN 1946-2:1999 Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 2: Measurements by guarded hot plate method
ISO 8302:1991 Thermal insulation — Determination of steady-state thermal resistance and related properties — Guarded hot plate apparatus
EN ISO 9288:1996 Thermal insulation - Heat transfer by radiation - Physical quantities and definitions (ISO 9288:1989)
ISO 8301:1991 Thermal insulation Determination of steady-state thermal resistance and related properties Heat flow meter apparatus
ISO 9288:1989 Thermal insulation — Heat transfer by radiation — Physical quantities and definitions
ISO 7345:1987 Thermal insulation Physical quantities and definitions

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.