EN 12668-3:2013
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
Withdrawn date
31-05-2014
Published date
06-11-2013
Publisher
Foreword
1 Scope
2 Normative references
3 Description of tests and reporting
This European Standard describes methods and acceptance criteria for verifying the performance of ultrasonic equipment (i.e. instrument and probe combined as defined in EN 12668 1 and EN 12668 2) by the use of appropriate standard calibration blocks. These methods are not intended to prove the suitability of the equipment for particular applications. The methods described are suitable for the use by operators working under site or shop floor conditions. The methods only apply to pulse echo equipment using A-scan presentation, with gain controls or attenuators calibrated in steps not greater than 2 dB and used essentially in contact testing. These methods are specifically intended for manual testing equipment. For automated testing different tests can be needed to ensure satisfactory performance.
| Committee |
CEN/TC 138
|
| DevelopmentNote |
Supersedes PREN 12668-3. (11/2013)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DIN EN 12668-3 E : 2014 | Identical |
| I.S. EN 12668-3:2013 | Identical |
| ONORM EN 12668-3 : 2014 | Identical |
| NBN EN 12668-3 : 2014 | Identical |
| UNE-EN 12668-3:2014 | Identical |
| NEN EN 12668-3 : 2013 | Identical |
| UNI EN 12668-3 : 2013 | Identical |
| NS EN 12668-3 : 2013 | Identical |
| SN EN 12668-3 : 2014 | Identical |
| NF EN 12668-3 : 2013 | Identical |
| BS EN 12668-3:2013 | Identical |
| DIN EN 12668-3:2014-02 | Identical |
| PN EN 12668-3 : 2014 | Identical |
| 17/30334205 DC : 0 | BS EN 13979-1 - RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - MONOBLOC WHEELS - DESIGN ASSESSMENT PROCEDURE - PART 1: FORGED AND ROLLED WHEELS |
| UNE-EN 15317:2014 | Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment |
| 10/30198090 DC : 0 | BS EN ISO 13588 - NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING - USE OF (SEMI-) AUTOMATED PHASED ARRAY TECHNOLOGY |
| UNI EN ISO 17405 : 2014 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - TECHNIQUE OF TESTING CLADDINGS PRODUCED BY WELDING, ROLLING AND EXPLOSION |
| DIN EN ISO 16828:2014-06 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - TIME-OF-FLIGHT DIFFRACTION TECHNIQUE AS A METHOD FOR DETECTION AND SIZING OF DISCONTINUITIES (ISO 16828:2012) |
| DIN EN 583-6:2009-03 | NON-DESTRUCTIVE TESTING - ULTRASONIC EXAMINATION - PART 6: TIME-OF-FLIGHT DIFFRACTION TECHNIQUE AS A METHOD FOR DETECTION AND SIZING OF DISCONTINUITIES |
| I.S. EN 583-2:2001 | NON-DESTRUCTIVE TESTING - ULTRASONIC EXAMINATION - PART 2: SENSITIVITY AND RANGE SETTING |
| DIN EN ISO 16810 E : 2014 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - GENERAL PRINCIPLES (ISO 16810:2012) |
| I.S. EN ISO 16828:2014 | ON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - TIME-OF-FLIGHT DIFFRACTION TECHNIQUE AS A METHOD FOR DETECTION AND SIZING OF DISCONTINUITIES (ISO 16828:2012) |
| DIN EN ISO 17405 E : 2014 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - TECHNIQUE OF TESTING CLADDINGS PRODUCED BY WELDING, ROLLING AND EXPLOSION (ISO 17405:2014) |
| 12/30270659 DC : 0 | BS EN 10228-3 - NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 3: ULTRASONIC TESTING OF FERRITIC OR MARTENSITIC STEEL FORGINGS |
| DIN EN ISO 16811:2014-06 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - SENSITIVITY AND RANGE SETTING (ISO 16811:2012) |
| DD CEN/TS 13979-2:2011 | Railway applications. Wheelsets and bogies. Monobloc wheels. Technical approval procedure Cast wheels |
| 17/30326176 DC : 0 | BS EN 16729-3 - RAILWAY APPLICATIONS - INFRASTRUCTURE - NON-DESTRUCTIVE TESTING ON RAILS IN TRACK - PART 3: REQUIREMENTS FOR IDENTIFYING INTERNAL AND SURFACE RAIL DEFECTS |
| 04/30123014 DC : DRAFT SEP 2004 | ISO 4992-2 - STEEL CASTINGS - ULTRASONIC EXAMINATION - PART 2: STEEL CASTINGS FOR HIGHLY STRESSED COMPONENTS |
| DD CEN/TS 14751:2004 | Welding. Use of time-of-flight diffraction technique (TOFD) for examination of welds |
| UNE-EN ISO 17405:2015 | Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding, rolling and explosion (ISO 17405:2014) |
| 07/30135963 DC : 0 | BS EN 1714 - NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING OF WELDED JOINTS |
| ISO 16831:2012 | Non-destructive testing — Ultrasonic testing — Characterization and verification of ultrasonic thickness measuring equipment |
| S.R. CEN/TS 13979-2:2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - MONOBLOC WHEELS - TECHNICAL APPROVAL PROCEDURE - PART 2: CAST WHEELS |
| I.S. EN ISO 16810:2014 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - GENERAL PRINCIPLES (ISO 16810:2012) |
| BS EN 16910-1:2018 | Railway applications. Rolling stock. Requirements for non-destructive testing on running gear in railway maintenance Wheelsets |
| EN ISO 22825:2017 | NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING - TESTING OF WELDS IN AUSTENITIC STEELS AND NICKEL-BASED ALLOYS (ISO 22825:2017) |
| EN 10228-3:2016 | Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings |
| DIN EN 13979-1 E : 2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - MONOBLOC WHEELS - TECHNICAL APPROVAL PROCEDURE - PART 1: FORGED AND ROLLED WHEELS |
| BS EN 10306:2002 | Iron and steel. Ultrasonic testing of H beams with parallel flanges and IPE beams |
| UNE-EN 12680-3:2012 | Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings |
| BS EN 12668-1:2010 | Non-destructive testing. Characterization and verification of ultrasonic examination equipment Instruments |
| BS EN 10307:2001 | Non-destructive testing. Ultrasonic testing of austenitic and austentitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method) |
| DIN EN 13100-3:2005-02 | Non-destructive testing of welded joints in thermoplastics semi-finished products - Part 3: Ultrasonic testing |
| CEN/TS 13979-2:2011 | Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval procedure - Part 2: Cast wheels |
| EN 12680-1:2003 | Founding - Ultrasonic examination - Part 1: Steel castings for general purposes |
| EN 10308:2001 | Non destructive testing - Ultrasonic testing of steel bars |
| EN 10306:2001 | Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams |
| EN 10307:2001 | Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method) |
| DIN EN 12680-2:2003-06 | Founding - Ultrasonic examination - Part 2: Steel castings for highly stressed components; German version EN 12680-2:2003 |
| EN 12680-3:2011 | Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings |
| DIN EN 10307:2002-03 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING OF AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEELS FLAT PRODUCTS OF THICKNESS EQUAL TO OR GREATER THAN 6 MM (REFLECTION METHOD) |
| EN 12668-1:2010 | Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments |
| EN 12680-2:2003 | Founding - Ultrasonic examination - Part 2: Steel castings for highly stressed components |
| DIN EN 12680-3:2012-02 | Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings |
| CEN/TS 14751:2004 | Welding - Use of time-of-flight diffraction technique (TOFD) for examination of welds |
| NF EN 12668-1 : 2010 | NON-DESTRUCTIVE TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC TESTING EQUIPMENT - PART 1: INSTRUMENTS |
| EN 10228-4:2016 | Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings |
| EN 13100-3:2004 | Non destructive testing of welded joints in thermoplastics semi-finished products - Part 3: Ultrasonic testing |
| 08/30159339 DC : DRAFT JUNE 2008 | BS EN 12668-1 - NON-DESTRUCTIVE TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC TESTING EQUIPMENT - PART 1: INSTRUMENTS |
| I.S. CEN TS 14751:2004 | WELDING - USE OF TIME-OF-FLIGHT DIFFRACTION TECHNIQUE (TOFD) FOR EXAMINATION OF WELDS |
| BS ISO 18610:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure. Determination of elastic properties by ultrasonic technique |
| 10/30218967 DC : 0 | BS EN 12680-3 - FOUNDING - ULTRASONIC EXAMINATION - PART 3: SPHEROIDAL GRAPHITE CAST IRON CASTINGS |
| 12/30270662 DC : 0 | BS EN 10228-4 - NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 4: ULTRASONIC TESTING OF AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEEL FORGINGS |
| BS ISO 4992-2:2006 | Steel castings. Ultrasonic examination Steel castings for highly stressed components |
| UNI EN 583-6 : 2009 | NON-DESTRUCTIVE TESTING - ULTRASONIC EXAMINATION - PART 6: TIME-OF-FLIGHT DIFFRACTION TECHNIQUE AS A METHOD FOR DETECTION AND SIZING OF DISCONTINUITIES |
| PREN 13979-1 : DRAFT 2017 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - MONOBLOC WHEELS - DESIGN ASSESSMENT PROCEDURE - PART 1: FORGED AND ROLLED WHEELS |
| PREN 10228-4 : DRAFT 2012 | NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 4: ULTRASONIC TESTING OF AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEEL FORGINGS |
| DIN EN 12680-3 E : 2012 | FOUNDING - ULTRASONIC TESTING - PART 3: SPHEROIDAL GRAPHITE CAST IRON CASTINGS |
| DIN EN 12680-2 E : 2003 | FOUNDING - ULTRASONIC EXAMINATION - PART 2: STEEL CASTINGS FOR HIGHLY STRESSED COMPONENTS |
| DIN EN 12680-1 E : 2003 | FOUNDING - ULTRASONIC EXAMINATION - PART 1: STEEL CASTINGS FOR GENERAL PURPOSES |
| DIN EN 15317 E : 2014 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC THICKNESS MEASURING EQUIPMENT |
| DIN EN 15317:2014-02 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC THICKNESS MEASURING EQUIPMENT |
| DIN EN 12668-2:2010-06 | Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes |
| DIN EN 13979-1:2011-06 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - MONOBLOC WHEELS - TECHNICAL APPROVAL PROCEDURE - PART 1: FORGED AND ROLLED WHEELS |
| BS EN 13979-1 : 2003 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - MONOBLOC WHEELS - TECHNICAL APPROVAL PROCEDURE - PART 1: FORGED AND ROLLED WHEELS |
| BS EN 10308:2002 | Non-destructive testing. Ultrasonic testing of steel bars |
| I.S. EN 10228-3:2016 | NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 3: ULTRASONIC TESTING OF FERRITIC OR MARTENSITIC STEEL FORGINGS |
| DIN EN 583-2:2001-04 | NON-DESTRUCTIVE TESTING - ULTRASONIC EXAMINATION - PART 2: SENSITIVITY AND RANGE SETTING |
| UNI EN 12668-1 : 2010 | NON-DESTRUCTIVE TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC EXAMINATION EQUIPMENT - PART 1: INSTRUMENTS |
| UNI EN 12668-2 : 2010 | NON-DESTRUCTIVE TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC EXAMINATION EQUIPMENT - PART 2: PROBES |
| I.S. EN 12668-1:2010 | NON-DESTRUCTIVE TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC EXAMINATION EQUIPMENT - PART 1: INSTRUMENTS |
| I.S. EN 15317:2013 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC THICKNESS MEASURING EQUIPMENT |
| I.S. EN 12668-2:2010 | NON-DESTRUCTIVE TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC EXAMINATION EQUIPMENT - PART 2: PROBES |
| I.S. EN 10228-4:2016 | NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 4: ULTRASONIC TESTING OF AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEEL FORGINGS |
| I.S. EN 12680-3:2011 | FOUNDING - ULTRASONIC TESTING - PART 3: SPHEROIDAL GRAPHITE CAST IRON CASTINGS |
| UNI CEN/TS 13979-2 : 2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - MONOBLOC WHEELS - TECHNICAL APPROVAL PROCEDURE - PART 2: CAST WHEELS |
| DIN EN 12668-1:2010-05 | Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments |
| PD CEN ISO/TR 25107:2006 | Non-destructive testing. Guidelines for NDT training syllabuses |
| 13/30277410 DC : 0 | BS EN 15317 - NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC THICKNESS MEASURING EQUIPMENT |
| UNI EN 13979-1 : 2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - MONOBLOC WHEELS - TECHNICAL APPROVAL PROCEDURE - PART 1: FORGED AND ROLLED WHEELS |
| 11/30238923 DC : 0 | BS ISO 16811 - NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - SENSITIVITY AND RANGE SETTING |
| DIN EN ISO 17405:2014-10 | Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding, rolling and explosion (ISO 17405:2014); German version EN ISO 17405:2014 |
| PREN 12799 : DRAFT 2017 | BRAZING - NON-DESTRUCTIVE EXAMINATION OF BRAZED JOINTS |
| UNI EN ISO 16828 : 2014 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - TIME-OF-FLIGHT DIFFRACTION TECHNIQUE AS A METHOD FOR DETECTION AND SIZING OF DISCONTINUITIES |
| 10/30195043 DC : 0 | BS EN ISO 22825 - NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING - TESTING OF WELDS IN AUSTENITIC STEELS AND NICKEL-BASED ALLOYS |
| DIN EN ISO 16811 E : 2014 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - SENSITIVITY AND RANGE SETTING (ISO 16811:2012) |
| BS ISO 4992-1:2006 | Steel castings. Ultrasonic examination Steel castings for general purposes |
| I.S. EN ISO 16811:2014 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - SENSITIVITY AND RANGE SETTING (ISO 16811:2012) |
| 04/30123011 DC : DRAFT SEP 2004 | ISO 4992-1 - STEEL CASTINGS - ULTRASONIC EXAMINATION - PART 1: STEEL CASTINGS FOR GENERAL PURPOSES |
| DIN EN ISO 16810:2014-07 | Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012) |
| 16/30345944 DC : 0 | BS EN ISO 22825 - NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING - TESTING OF WELDS IN AUSTENITIC STEELS AND NICKEL-BASED ALLOYS |
| I.S. EN 583-6:2008 | NON-DESTRUCTIVE TESTING - ULTRASONIC EXAMINATION - PART 6: TIMEOF- FLIGHT DIFFRACTION TECHNIQUE AS A METHOD FOR DETECTION AND SIZING OF DISCONTINUITIES |
| KTA 3211.1 : 2015 | PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS |
| CEN ISO/TR 25107:2006 | Non-destructive testing - Guidelines for NDT training syllabuses (ISO/TR 25107:2006) |
| UNE-EN ISO 16828:2014 | Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities (ISO 16828:2012) |
| ISO/TR 25107:2006 | Non-destructive testing Guidelines for NDT training syllabuses |
| ISO 22825:2017 | Non-destructive testing of welds — Ultrasonic testing — Testing of welds in austenitic steels and nickel-based alloys |
| UNE-EN 10228-4:2016 | Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings |
| UNE-EN 10228-3:2016 | Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings |
| NF EN 13979-1 : 2004 + A2 2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - MONOBLOC WHEELS - TECHNICAL APPROVAL PROCEDURE - PART 1: FORGED AND ROLLED WHEELS |
| DIN EN 12668-2 E : 2010 | NON-DESTRUCTIVE TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC EXAMINATION EQUIPMENT - PART 2: PROBES |
| BS EN 12680-3:2011 | Founding. Ultrasonic testing Spheroidal graphite cast iron castings |
| ISO 16811:2012 | Non-destructive testing — Ultrasonic testing — Sensitivity and range setting |
| EN 13979-1:2003+A2:2011 | Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval procedure - Part 1: Forged and rolled wheels |
| I.S. EN 13979-1:2004 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - MONOBLOC WHEELS - TECHNICAL APPROVAL PROCEDURE - PART 1: FORGED AND ROLLED WHEELS |
| UNI EN 15317 : 2013 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC THICKNESS MEASURING EQUIPMENT |
| UNI EN 12680-3 : 2012 | FOUNDING - ULTRASONIC TESTING - PART 3: SPHEROIDAL GRAPHITE CAST IRON CASTINGS |
| 15/30270299 DC : 0 | BS EN 16910 - RAILWAY APPLICATIONS - ROLLING STOCK - REQUIREMENTS FOR NONDESTRUCTIVE TESTING ON RUNNING GEAR IN RAILWAY MAINTENANCE |
| 15/30280621 DC : 0 | BS ISO 18610 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT ROOM TEMPERATURE - DETERMINATION OF ELASTIC PROPERTIES BY AN ULTRASONIC TECHNIQUE |
| BS EN ISO 16811:2014 | Non-destructive testing. Ultrasonic testing. Sensitivity and range setting |
| 08/30159342 DC : DRAFT JUNE 2008 | BS EN 12668-2 - NON-DESTRUCTIVE TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC EXAMINATION EQUIPMENT - PART 2: PROBES |
| BS EN 583-6:2008 | Non-destructive testing. Ultrasonic examination Time-of-flight diffraction technique as a method for detection and sizing of discontinuities |
| BS EN ISO 16828:2014 | Non-destructive testing. Ultrasonic testing. Time-of-flight diffraction technique as a method for detection and sizing of discontinuities |
| I.S. EN 16910-1:2018 | RAILWAY APPLICATIONS - ROLLING STOCK - REQUIREMENTS FOR NON-DESTRUCTIVE TESTING ON RUNNING GEAR IN RAILWAY MAINTENANCE - PART 1: WHEELSETS |
| DD ENV 583-6:2000 | Non-destructive testing. Ultrasonic examination Time-of-flight diffraction technique as a method for detection and sizing of discontinuities |
| 03/115417 DC : DRAFT SEP 2003 | BS EN ISO 22825 - NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC METHOD - TESTING OF WELDS IN AUSTENITIC STEELS AND NICKEL BASED ALLOYS |
| PREN 10228-3 : DRAFT 2012 | NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 3: ULTRASONIC TESTING OF FERRITIC OR MARTENSITIC STEEL FORGINGS |
| UNI CEN ISO/TR 25107 : 2012 | NON-DESTRUCTIVE TESTING - GUIDELINES FOR NDT TRAINING SYLLABUSES |
| EN 16910-1:2018 | Railway applications - Rolling stock - Requirements for non-destructive testing on running gear in railway maintenance - Part 1: Wheelsets |
| BS EN ISO 22825:2017 | Non-destructive testing of welds. Ultrasonic testing. Testing of welds in austenitic steels and nickel-based alloys |
| ISO 4992-1:2006 | Steel castings Ultrasonic examination Part 1: Steel castings for general purposes |
| I.S. EN ISO 22825:2017 | NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING - TESTING OF WELDS IN AUSTENITIC STEELS AND NICKEL-BASED ALLOYS (ISO 22825:2017) |
| I.S. CEN ISO TR 25107:2006 | NON-DESTRUCTIVE TESTING - GUIDELINES FOR NDT TRAINING SYLLABUSES |
| DIN EN 10228-4:2016-10 | NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 4: ULTRASONIC TESTING OF AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEEL FORGINGS |
| DIN EN 10228-3:2016-10 | NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 3: ULTRASONIC TESTING OF FERRITIC OR MARTENSITIC STEEL FORGINGS |
| UNE-EN ISO 16811:2014 | Non-destructive testing - Ultrasonic testing - Sensitivity and range setting (ISO 16811:2012) |
| ISO 16810:2012 | Non-destructive testing — Ultrasonic testing — General principles |
| BS EN 12680-1:2003 | Founding. Ultrasonic examination Steel castings for general purposes |
| BS EN 12680-2:2003 | Founding. Ultrasonic examination Steel castings for highly stressed components |
| BS EN 15317:2013 | Non-destructive testing. Ultrasonic testing. Characterization and verification of ultrasonic thickness measuring equipment |
| BS EN 10228-4:2016 | Non-destructive testing of steel forgings Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings |
| BS EN 13100-3:2004 | Non-destructive testing of welded joints in thermoplastics semi-finished products Ultrasonic testing |
| UNE-EN 13979-1:2006 | Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval procedure - Part 1: Forged and rolled wheels |
| UNE-EN ISO 16810:2014 | Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012) |
| BS EN 10228-3:2016 | Non-destructive testing of steel forgings Ultrasonic testing of ferritic or martensitic steel forgings |
| ISO 16828:2012 | Non-destructive testing — Ultrasonic testing — Time-of-flight diffraction technique as a method for detection and sizing of discontinuities |
| EN ISO 16810:2014 | Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012) |
| EN 583-2:2001 | Non-destructive testing - Ultrasonic examination - Part 2: Sensitivity and range setting |
| EN ISO 16811:2014 | Non-destructive testing - Ultrasonic testing - Sensitivity and range setting (ISO 16811:2012) |
| EN 12799:2000/A1:2003 | BRAZING - NON-DESTRUCTIVE EXAMINATION OF BRAZED JOINTS |
| EN 15317:2013 | Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment |
| EN ISO 17405:2014 | Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding, rolling and explosion (ISO 17405:2014) |
| EN 16729-3:2018 | Railway applications - Infrastructure - Non-destructive testing on rails in track - Part 3: Requirements for identifying internal and surface rail defects |
| EN ISO 16828:2014 | Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction technique as a method for detection and sizing of discontinuities (ISO 16828:2012) |
| EN 583-6:2008 | Non-destructive testing - Ultrasonic examination - Part 6: Time-of-flight diffraction technique as a method for detection and sizing of discontinuities |
| DIN EN 12668-1 E : 2010 | NON-DESTRUCTIVE TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC EXAMINATION EQUIPMENT - PART 1: INSTRUMENTS |
| UNE-EN 583-6:2010 | Non-destructive testing - Ultrasonic examination - Part 6: Time-of-flight diffraction technique as a method for detection and sizing of discontinuities |
| I.S. EN ISO 17405:2014 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - TECHNIQUE OF TESTING CLADDINGS PRODUCED BY WELDING, ROLLING AND EXPLOSION (ISO 17405:2014) |
| 09/30187580 DC : DRAFT SEP 2009 | BS EN ISO 10863 - WELDING - USE OF TIME-OF-FLIGHT DIFFRACTION TECHNIQUE (TOFD) FOR TESTING OF WELDS |
| 07/30141474 DC : 0 | BS EN 13979-2 - RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - MONOBLOC WHEELS - TECHNICAL APPROVAL PROCEDURE - PART 2: CAST WHEELS |
| BS EN ISO 17405:2014 | Non-destructive testing. Ultrasonic testing. Technique of testing claddings produced by welding, rolling and explosion |
| DIN EN ISO 16828 E : 2014 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - TIME-OF-FLIGHT DIFFRACTION TECHNIQUE AS A METHOD FOR DETECTION AND SIZING OF DISCONTINUITIES (ISO 16828:2012) |
| BS EN ISO 16810:2014 | Non-destructive testing. Ultrasonic testing. General principles |
| PREN 12680-3 : DRAFT 2010 | FOUNDING - ULTRASONIC EXAMINATION - PART 3: SPHEROIDAL GRAPHITE CAST IRON CASTINGS |
| ISO 18610:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics) Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure Determination of elastic properties by ultrasonic technique |
| ISO 4992-2:2006 | Steel castings Ultrasonic examination Part 2: Steel castings for highly stressed components |
| ISO 12710:2002 | Non-destructive testing Ultrasonic inspection Evaluating electronic characteristics of ultrasonic test instruments |
| I.S. EN 16729-3:2018 | RAILWAY APPLICATIONS - INFRASTRUCTURE - NON-DESTRUCTIVE TESTING ON RAILS IN TRACK - PART 3: REQUIREMENTS FOR IDENTIFYING INTERNAL AND SURFACE RAIL DEFECTS |
| 17/30359544 DC : 0 | BS EN 12799 - BRAZING - NON-DESTRUCTIVE EXAMINATION OF BRAZED JOINTS |
| UNI EN ISO 16810 : 2014 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - GENERAL PRINCIPLES |
| UNI EN ISO 16811 : 2014 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - SENSITIVITY AND RANGE SETTING |
| KTA 3201.3 : 2007(R2012) | COMPONENTS OF THE REACTOR COOLANT PRESSURE BOUNDARY OF LIGHT WATER REACTORS - PART 3: MANUFACTURE |
| BS EN 583-2:2001 | Non-destructive testing. Ultrasonic examination Sensitivity and range setting |
| BS EN 12668-2:2010 | Non-destructive testing. Characterization and verification of ultrasonic examination equipment Probes |
| BS EN 12799:2000 | Brazing. Non-destructive examination of brazed joints |
| ISO 17405:2014 | Non-destructive testing Ultrasonic testing Technique of testing claddings produced by welding, rolling and explosion |
| EN 12668-2:2010 | Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes |
| DIN EN 10228-3:1998-07 | NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 3: ULTRASONIC TESTING OF FERRITIC OR MARTENSITIC STEEL FORGINGS |
| DIN EN 10228-4:1999-10 | NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 4: ULTRASONIC TESTING OF AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEEL FORGINGS |
| DIN EN 10306:2002-04 | IRON AND STEEL - ULTRASONIC TESTING OF H BEAMS WITH PARALLEL FLANGES AND IPE BEAMS |
| DIN EN 12680-1:2003-06 | Founding - Ultrasonic examination - Part 1: Steel castings for general purposes; German version EN 12680-1:2003 |
| DIN EN 10308:2002-03 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING OF STEEL BARS |
| EN ISO 7963:2010 | Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006) |
| EN 12668-2:2010 | Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes |
| ISO 2400:2012 | Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 1 |
| EN 12668-1:2010 | Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments |
| EN ISO 2400:2012 | Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012) |
| ISO 7963:2006 | Non-destructive testing — Ultrasonic testing —- Specification for calibration block No. 2 |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.